@ARTICLE{
author={Rajcevic Jovan,Vasic Veran V,Vuckovic Mladen,Novakovic Djordje,Popovic Vladimir,Jerkan Dejan G},
year={2025},
title={Analytical Modeling of IPMSM Flux Maps Using Hyperbolic and Gaussian Prototype Functions},
journal={2025 23RD INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, EE},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kovacevic Aleksandra,Vasic Veran V,Reljic Dejan D,Jerkan Dejan G},
year={2025},
title={Harmonic Content of the DC Link Current in Three-Phase VSIs Supplying Induction Machines},
journal={2025 23RD INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, EE},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Despotovic Zivadin,Reljic Dejan D,Rajs Vladimir M,Jerkan Dejan G,Vasic Veran V,Popadic Bane P,Herceg Dejana L},
year={2025},
title={Parameter Identification and Output Voltage and Current Control of the IPT System Based on the Primary-Side EMF Phasor Estimation},
journal={IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS},
volume={13},
number={4},
pages={4205-4220},
document_type={Article},
} 

@ARTICLE{
author={Despotovic Zivadin,Reljic Dejan D,Vasic Veran V},
year={2025},
title={ZPA Tuning Method for LCC-S IPT System Using Two Switch-Controlled Capacitors on the Primary Side},
journal={2025 IEEE WIRELESS POWER TECHNOLOGY CONFERENCE AND EXPO, WPTCE},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vuckovic Mladen,Popovic Vladimir,Jerkan Dejan G,Jaric Milica,Banovic Milica D,Vasic Veran V,Marcetic Darko P},
year={2024},
title={Nonlinear Magnetic Model of IPMSM Based on the Frozen Permeability Technique Utilized in Improved MTPA Control},
journal={ELECTRONICS},
volume={13},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Despotovic Zivadin,Reljic Dejan D,Vasic Veran V,Oros Djura V},
year={2022},
title={Steady-State Multiple Parameters Estimation of the Inductive Power Transfer System},
journal={IEEE ACCESS},
volume={10},
number={},
pages={46878-46894},
document_type={Article},
} 

@ARTICLE{
author={Vuckovic Mladen,Dumnic Boris P,Vasic Veran V,Vujkov Barbara,Popovic Vladimir},
year={2021},
title={Inductance Identification of the Surface Permanent Magnet Synchronous Machines with sinusoidal voltage test signals},
journal={2021 21ST INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE 2021)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Despotovic Zivadin,Reljic Dejan D,Vasic Veran V,Oros Djura V},
year={2021},
title={Power Transfer Analysis of an Asymmetric Wireless Transmission System Using the Scattering Parameters},
journal={ELECTRONICS},
volume={10},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vuckovic Mladen,Popovic Vladimir,Oros Djura V,Vasic Veran V,Marcetic Darko P},
year={2021},
title={Low Voltage Induction Motor Traction Drive Self-Commissioning Technique with the Advanced Measured Signal Processing Procedure},
journal={ENERGIES},
volume={14},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Despotovic Zivadin,Vasic Veran V,Oros Djura V,Jerkan Dejan G},
year={2020},
title={Coupling Factor Estimation in Vehicle-to-Vehicle Wireless Power Transfer System Based on Geometry Properties},
journal={2020 IEEE WIRELESS POWER TRANSFER CONFERENCE (WPTC)},
volume={},
number={},
pages={227-230},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Isakov Ivana,Vasic Veran V,Jerkan Dejan G,Reljic Dejan D,Todorovic Ivan M},
year={2019},
title={Multi-phase Induction Machine Speed Estimation Method Using Rotor Slot Harmonics},
journal={PROCEEDINGS OF 18TH INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES (IEEE EUROCON 2019)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vukajlovic Nikola,Milicevic Dragan M,Popadic Bane P,Dumnic Boris P,Jerkan Dejan G,Vasic Veran V},
year={2019},
title={Increasing the Induction Machine Power Capacity using Industrial Frequency Converter},
journal={PROCEEDINGS OF 18TH INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES (IEEE EUROCON 2019)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Oros Djura V,Congradac Velimir D,Vasic Veran V,Kulic Filip J},
year={2019},
title={Effects of Introducing the Improved Energy Management System in the Urgent Care Center of the Clinical Center of Vojvodina},
journal={THERMAL SCIENCE},
volume={23},
number={5},
pages={2919-2927},
document_type={Article},
} 

@ARTICLE{
author={Popovic Vladimir,Oros Djura V,Vasic Veran V,Marcetic Darko P},
year={2019},
title={Tuning the rotor time constant parameter of IM using the minimum order recursive linear least square estimator},
journal={IET ELECTRIC POWER APPLICATIONS},
volume={13},
number={2},
pages={266-276},
document_type={Article},
} 

@ARTICLE{
author={Popadic Bane P,Vasic Veran V,Dumnic Boris P,Milicevic Dragan M,Vukajlovic Nikola},
year={2017},
title={Rotor slot harmonics based induction machine speed estimation},
journal={2017 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Reljic Dejan D,Matic Dragan Z,Jerkan Dejan G,Oros Djura V,Vasic Veran V},
year={2014},
title={The Estimation of Iron Losses in a Non-Oriented Electrical Steel Sheet Based on the Artificial Neural Network and the Genetic Algorithm Approaches},
journal={2014 IEEE INTERNATIONAL ENERGY CONFERENCE (ENERGYCON 2014)},
volume={},
number={},
pages={51-57},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Matic Dragan Z,Kanovic Zeljko S,Reljic Dejan D,Kulic Filip J,Oros Djura V,Vasic Veran V},
year={2013},
title={Broken Bar Detection Using Current Analysis A Case Study},
journal={2013 9TH IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED)},
volume={},
number={},
pages={407-411},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Reljic Dejan D,Vasic Veran V,Oros Djura V},
year={2012},
title={Power factor correction and harmonics mitigation based on phase shifting approach},
journal={2012 15TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE/PEMC)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dumnic Boris P,Katic Vladimir A,Vasic Veran V,Milicevic Dragan M,Delimar Marko},
year={2012},
title={An Improved MRAS Based Sensorless Vector Control Method for Wind Power Generator},
journal={JOURNAL OF APPLIED RESEARCH AND TECHNOLOGY},
volume={10},
number={},
pages={687-697},
document_type={Article},
} 

@ARTICLE{
author={Kulic Filip J,Matic Dragan,Dumnic Boris P,Vasic Veran V},
year={2011},
title={Optimal Fuzzy Controller Tuned by TV-PSO for Induction Motor Speed Control},
journal={ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING},
volume={11},
number={1},
pages={49-54},
document_type={Article},
} 

@ARTICLE{
author={Dumnic Boris P,Oros Djura V,Milicevic Dragan M,Matic Dragan Z,Vasic Veran V},
year={2010},
title={Vector Control of Induction Generator with Parallel Stator Resistance and Rotor Speed Estimation},
journal={INTERNATIONAL EXHIBITION AND CONFERENCE FOR POWER ELECTRONICS, INTELLIGENT MOTION AND POWER QUALITY 2010 (PCIM EUROPE 2010), VOLS 1 AND 2},
volume={},
number={},
pages={595-599},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dumnic Boris P,Matic Dragan,Katic Vladimir A,Vasic Veran V,Delimar Marko},
year={2010},
title={Optimal MRAS Speed Estimation for Induction Generator in Wind Turbine Application},
journal={MELECON 2010: THE 15TH IEEE MEDITERRANEAN ELECTROTECHNICAL CONFERENCE},
volume={},
number={},
pages={949-954},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Oros Djura V,Vasic Veran V,Marcetic Darko P,Kulic Filip J},
year={2010},
title={Influence of parameters detuning on induction motor NFO shaft-sensorless scheme},
journal={ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING},
volume={10},
number={4},
pages={121-124},
document_type={Article},
} 

@ARTICLE{
author={Vasic Veran V,Marcetic Darko P,Vukosavic Slobodan N,Oros Djura V},
year={2010},
title={Prediction of local instabilities in open-loop induction motor drives},
journal={COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING},
volume={29},
number={3},
pages={865-884},
document_type={Article},
} 

@ARTICLE{
author={Jevremovic VR,Vasic Veran V,Marcetic Darko P,Jeftenic Borislav I},
year={2010},
title={Speed-sensorless control of induction motor based on reactive power with rotor time constant identification},
journal={IET ELECTRIC POWER APPLICATIONS},
volume={4},
number={6},
pages={462-473},
document_type={Article},
} 

@ARTICLE{
author={Vasic Veran V,Marcetic Darko P,Oros Djura V,Kulic Filip J},
year={2009},
title={Prediction of Local Instabilities caused by Inverter Dead Time in AC drive},
journal={EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9},
volume={},
number={},
pages={4086-4094},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Matic Dragan,Dumnic Boris P,Kulic Filip J,Vasic Veran V},
year={2008},
title={GA optimization of PI controller in MRAS structure for induction motor speed estimation},
journal={NEUREL 2008: NINTH SYMPOSIUM ON NEURAL NETWORK APPLICATIONS IN ELECTRICAL ENGINEERING, PROCEEDINGS},
volume={},
number={},
pages={191-194},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Oros Djura V,Vasic Veran V,Marcetic Darko P},
year={2008},
title={Natural Field Orientation Sensorless Induction Motor Drive with On-line Stator Resistance Parameter Update},
journal={ELECTRIC POWER COMPONENTS AND SYSTEMS},
volume={36},
number={12},
pages={1318-1336},
document_type={Article},
} 

@ARTICLE{
author={Bugarski Vladimir,Kulic Filip J,Djurdjulov Jugoslav,Vasic Veran V},
year={2008},
title={Speed Control of Induction Machine using Dual Fuzzy Logic Controller},
journal={PROCEEDINGS ELMAR-2008, VOLS 1 AND 2},
volume={},
number={},
pages={431-434},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dumnic Boris P,Ivanovic Zoran B,Katic Vladimir A,Vasic Veran V,Delimar Marko},
year={2007},
title={Sensorless vector control and effects of machine parameters mismatch in variable speed wind turbines},
journal={EUROCON 2007: THE INTERNATIONAL CONFERENCE ON COMPUTER AS A TOOL, VOLS 1-6},
volume={},
number={},
pages={2024-2029},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ostojic DB,Vasic Veran V,Dujic DB},
year={2005},
title={Methods for stator flux estimation in sensorless field orientation control of induction motor},
journal={EUROCON 2005: THE INTERNATIONAL CONFERENCE ON COMPUTER AS A TOOL, VOL 1 AND 2 , PROCEEDINGS},
volume={},
number={},
pages={1501-1504},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vasic Veran V,Vukosavic Slobodan N,Levi Emil},
year={2003},
title={A stator resistance estimation scheme for speed sensorless rotor flux oriented induction motor drives},
journal={IEEE TRANSACTIONS ON ENERGY CONVERSION},
volume={18},
number={4},
pages={476-483},
document_type={Article},
} 

@ARTICLE{
author={Vasic Veran V,Vukosavic Slobodan N},
year={2002},
title={Sensorless MRAS-based induction motor control with parallel speed and stator resistance estimation},
journal={EUROPEAN TRANSACTIONS ON ELECTRICAL POWER},
volume={12},
number={2},
pages={135-139},
document_type={Article},
}