@ARTICLE{
author={Kotorcevic Nikola N,Milenkovic Strahinja,Zivic Fatima T,Jordovic Branka A,Adamovic Dragan D,Todorovic Petar M,Grujovic Nenad N},
year={2024},
title={Material Extrusion 3D Printing of Micro-Porous Copper-Based Structure for Water Filters},
journal={MACHINES},
volume={12},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Grujovic Nenad N,Mitrovic Slobodan R,Tanaskovic Jovan D,Todorovic Petar M},
year={2021},
title={Influence of the Ringer's solution on wear of vacuum mixed poly(methyl methacrylate) bone cement in reciprocating sliding contact with AISI 316L stainless steel},
journal={HEMIJSKA INDUSTRIJA},
volume={75},
number={2},
pages={77-92},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Todorovic Petar M,Simunovic Katica,Miljojkovic Jasmina M,Simunovic Goran,Budak Igor M,Tadic Branko U},
year={2021},
title={A Novel Method for Determination of Kinetic Friction Coefficient using Inclined Plane},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={28},
number={2},
pages={447-455},
document_type={Article},
} 

@ARTICLE{
author={Jakovljevic Tamara,Jankovic Milica M,Savic Andrej M,Soldatovic Ivan A,Todorovic Petar M,Jere Jakulin Tadeja,Papa Gregor,Kovic Vanja},
year={2021},
title={The Sensor Hub for Detecting the Developmental Characteristics in Reading in Children on a White vs. Colored Background/Colored Overlays},
journal={SENSORS},
volume={21},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukicevic Arso M,Djapan Marko J,Todorovic Petar M,Eric Milan D,Stefanovic Miladin Z,Macuzic Ivan D},
year={2019},
title={Decision Support System for Dimensional Inspection of Extruded Rubber Profiles},
journal={IEEE ACCESS},
volume={7},
number={},
pages={112605-112616},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Tadic Branko U,Bogdanovic Bojan,Todorovic Petar M},
year={2019},
title={Using pre-processing and indenting of contact interface to improve fixture clamping efficiency},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={104},
number={1-4},
pages={179-194},
document_type={Article},
} 

@ARTICLE{
author={Vujovic Aleksandar,Todorovic Petar M,Stefanovic Miladin Z,Vukicevic Arso M,Vaskovic-Jovanovic Mina,Macuzic Ivan D,Stefanovic Nikola},
year={2019},
title={The Development and Implementation of an Aquaponics Embedded Device for Teaching and Learning Varied Engineering Concepts},
journal={INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION},
volume={35},
number={1},
pages={88-98},
document_type={Article},
} 

@ARTICLE{
author={Mijovic Pavle,Kovic Vanja,De Vos Maarten,Macuzic Ivan D,Todorovic Petar M,Jeremic Branislav M,Gligorijevic Ivan},
year={2017},
title={Towards continuous and real-time attention monitoring at work: reaction time versus brain response},
journal={ERGONOMICS},
volume={60},
number={2},
pages={241-254},
document_type={Article},
} 

@ARTICLE{
author={Macuzic Ivan D,Giagloglou Evanthia,Djapan Marko J,Todorovic Petar M,Jeremic Branislav M},
year={2016},
title={Occupational safety and health education under the lifelong learning framework in Serbia},
journal={INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS},
volume={22},
number={4},
pages={514-522},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Randjelovic Sasa,Todorovic Petar M,Zivkovic Jelena,Kocovic Vladimir,Budak Igor M,Vukelic Djordje B},
year={2016},
title={Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings},
journal={PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY},
volume={43},
number={},
pages={335-344},
document_type={Article},
} 

@ARTICLE{
author={Mijovic Pavle,Kovic Vanja,Macuzic Ivan D,Todorovic Petar M,Jeremic Branislav M,Milovanovic Milos M,Gligorijevic Ivan},
year={2015},
title={Do Micro-Breaks Increase the Attention Level of an Assembly Worker? An ERP Study},
journal={6TH INTERNATIONAL CONFERENCE ON APPLIED HUMAN FACTORS AND ERGONOMICS (AHFE 2015) AND THE AFFILIATED CONFERENCES, AHFE 2015},
volume={},
number={},
pages={5074-5080},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tsiafis Ch,Tsiafis I,Xanthopoulou M,Todorovic Petar M},
year={2015},
title={Fault Detection and Determination in Ball Bearings Based on Emd and Marginal Spectral Analysis},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={21},
number={4},
pages={982-990},
document_type={Article},
} 

@ARTICLE{
author={Randjelovic Sasa,Tadic Branko U,Todorovic Petar M,Vukelic Djordje B,Miloradovic Danijela M,Radenkovic Milan M,Tsiafis Christos},
year={2015},
title={Modelling of the ball burnishing process with a high-stiffness tool},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={81},
number={9-12},
pages={1509-1518},
document_type={Article},
} 

@ARTICLE{
author={Arsenijevic Petar S,Milosevic Marko D,Zivanovic Aleksandar S,Milicic Biljana R,Jeremic Branislav M,Filipovic Nenad D,Protrka Zoran M,Todorovic Petar M,Arsenijevic Slobodan N},
year={2015},
title={Analysis of cervical resistance during continuous controllable balloon dilatation: controlled clinical and experimental study},
journal={TRIALS},
volume={16},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Todorovic Petar M,Novkinic B,Buchmeister Borut,Radenkovic Milan M,Budak Igor M,Vukelic Djordje B},
year={2015},
title={Fixture Layout Design Based on a Single-Surface Clamping with Local Deformation},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={14},
number={3},
pages={379-391},
document_type={Article},
} 

@ARTICLE{
author={Tsiafis Ch,Zaharis Z,Xanthopoulou M,Skeberis Ch,Tsiafis I,Todorovic Petar M,Xenos Th D},
year={2015},
title={Detection of Non-Linear Signal Distortions Due to External Impulse Stimulations in Rolling Bearing Experimental Device},
journal={Journal of the Balkan Tribological Association},
volume={21},
number={1},
pages={233-245},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Tadic Branko U,Vukelic Djordje B,Jeremic Marija,Randjelovic Sasa,Nikolic Radovan H},
year={2015},
title={Analysis of the influence of loading and the plasticity index on variations in surface roughness between two flat surfaces},
journal={TRIBOLOGY INTERNATIONAL},
volume={81},
number={},
pages={276-282},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Buchmeister Borut,Djapan Marko J,Vukelic Djordje B,Milosevic Marko D,Tadic Branko U,Radenkovic Milan M},
year={2014},
title={Comparative Model Analysis of Two Types of Clamping Elements in Dynamic Conditions},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={6},
pages={1273-1279},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Vukelic Djordje B,Tadic Branko U,Veljkovic Dejan Z,Budak Igor M,Macuzic Ivan D,Lalic Bojan P},
year={2014},
title={Modelling of Dynamic Compliance of Fixture/Workpiece Interface},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={13},
number={1},
pages={54-65},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Vukelic Djordje B,Miljanic Dragomir,Bogdanovic Bojan,Macuzic Ivan D,Budak Igor M,Todorovic Petar M},
year={2014},
title={Model testing of fixture-workpiece interface compliance in dynamic conditions},
journal={JOURNAL OF MANUFACTURING SYSTEMS},
volume={33},
number={1},
pages={76-83},
document_type={Article},
} 

@ARTICLE{
author={Veljkovic Dejan Z,Macuzic Ivan D,Jeremic Branislav M,Mijovic Pavle,Todorovic Petar M},
year={2013},
title={Investigation on the RLS and Kalman Based Adaptive Order Tracking Techniques for Rotating Machinery Analysis},
journal={2013 PROGNOSTICS AND HEALTH MANAGEMENT CONFERENCE (PHM)},
volume={33},
number={},
pages={25-30},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Todorovic Petar M,Blagojevic Mirko Z,Vukelic Djordje B,Macuzic Ivan D,Jeremic Marija,Simic A,Jeremic Branislav M},
year={2013},
title={Static coefficient of rolling friction under heating},
journal={JOURNAL OF FRICTION AND WEAR},
volume={34},
number={6},
pages={450-453},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Gordic Dusan R,Babic Milun J,Jeremic Branislav M,Demichela Micaela,Macuzic Ivan D},
year={2013},
title={An Implementation of Infrared Thermography in Maintenance Plans Within a World Class Manufacturing Strategy},
journal={THERMAL SCIENCE},
volume={17},
number={4},
pages={977-987},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Bogdanovic Bojan,Jeremic Branislav M,Todorovic Petar M,Luzanin Ognjan,Budak Igor M,Vukelic Djordje B},
year={2013},
title={Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions},
journal={ASSEMBLY AUTOMATION},
volume={33},
number={4},
pages={386-400},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Todorovic Petar M,Luzanin Ognjan,Miljanic Dragomir,Jeremic Branislav M,Bogdanovic Bojan,Vukelic Djordje B},
year={2013},
title={Using specially designed high-stiffness burnishing tool to achieve high-quality surface finish},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={67},
number={1-4},
pages={601-611},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Rakin Marko P,Perovic Milenko M,Medjo Bojan I,Radakovic Zoran J,Todorovic Petar M,Pavisic Mirko N},
year={2013},
title={Heat Generation During Plunge Stage in Friction Stir Welding},
journal={THERMAL SCIENCE},
volume={17},
number={2},
pages={489-496},
document_type={Article},
} 

@ARTICLE{
author={Jeremic Branislav M,Vukelic Djordje B,Todorovic Petar M,Macuzic Ivan D,Pantic Marko,Dzunic Dragan S,Tadic Branko U},
year={2013},
title={Static friction at high contact temperatures and low contact pressure},
journal={JOURNAL OF FRICTION AND WEAR},
volume={34},
number={2},
pages={114-119},
document_type={Article},
} 

@ARTICLE{
author={Arsenijevic Slobodan N,Vukcevic-Globarevic Gordana,Volarevic Vladislav B,Macuzic Ivan D,Todorovic Petar M,Tanaskovic Irena,Mijailovic Milan Z,Raicevic Sasa,Jeremic Branislav M},
year={2012},
title={Continuous controllable balloon dilation: a novel approach for cervix dilation},
journal={TRIALS},
volume={13},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Tadic Branko U,Miljanic Dragomir,Budak Igor M,Todorovic Petar M,Randjelovic Sasa,Jeremic Branislav M},
year={2012},
title={Novel Workpiece Clamping Method for Increased Machining Performance},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={19},
number={4},
pages={837-846},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Jeremic Branislav M,Todorovic Petar M,Vukelic Djordje B,Proso Uros,Mandic Vesna M,Budak Igor M},
year={2012},
title={Efficient Workpiece Clamping by Indenting Cone-shaped Elements},
journal={INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING},
volume={13},
number={10},
pages={1725-1735},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Adamovic Dragan D,Mitrovic Slobodan R,Todorovic Petar M,Favaro Gregory,Pantic Marko},
year={2012},
title={Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165crmov12},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={2},
pages={228-237},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Babic Miroslav J,Veljkovic Dejan Z,Macuzic Ivan D,Colovic ZG,Jeremic Branislav M},
year={2011},
title={A Failure Analysis of a Massive Excavator Reduction Gear in Surface Mining Using Vibration-Based Condition Monitoring},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={17},
number={4},
pages={555-567},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Todorovic Petar M,Vukelic Djordje B,Jeremic Branislav M},
year={2011},
title={Failure analysis and effects of redesign of a polypropylene yarn twisting machine},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={5},
pages={1308-1321},
document_type={Article},
} 

@ARTICLE{
author={Jeremic Branislav M,Babic Miroslav J,Todorovic Petar M,Macuzic Ivan D},
year={2010},
title={Coefficient Of Dynamic Behaviour As Parameter For Tin Coating Condition Monitoring},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={1},
pages={35-45},
document_type={Article},
}