@ARTICLE{
author={Ducic Nedeljko,Jovicic Aleksandar,Radisa Radomir,Manasijevic Srecko,Slavkovic Radomir,Radovic Dragan},
year={2020},
title={Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={6},
pages={2077-2082},
document_type={Article},
} 

@ARTICLE{
author={Milicevic Ivan,Spasojevic Milica M,Slavkovic Radomir,Spasojevic Miroslav D,Maricic Aleksa M},
year={2018},
title={Effect of the Degree of Plastic Deformation on the Thermal Electromotive Force of Cu-X5crni1810 Steel Thermocouple},
journal={SCIENCE OF SINTERING},
volume={50},
number={4},
pages={421-432},
document_type={Article},
} 

@ARTICLE{
author={Milicevic Ivan,Popovic Marko,Ducic Nedeljko,Slavkovic Radomir,Dragicevic Snezana M,Maricic Aleksa M},
year={2018},
title={Experimental Identification of the Degree of Deformation of a Wire Subjected to Bending},
journal={SCIENCE OF SINTERING},
volume={50},
number={2},
pages={183-191},
document_type={Article},
} 

@ARTICLE{
author={Ducic Nedeljko,Milicevic Ivan,Cojbasic Zarko M,Manasijevic Srecko,Radisa Radomir,Slavkovic Radomir,Bozic Milos},
year={2017},
title={Intelligent system for automatic control of the process of filling the mold},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={90},
number={5-8},
pages={2223-2231},
document_type={Article},
} 

@ARTICLE{
author={Ducic Nedeljko,Slavkovic Radomir,Milicevic Ivan,Cojbasic Zarko M,Manasijevic Srecko,Radisa Radomir},
year={2017},
title={Optimization of the Gating System for Sand Casting Using Genetic Algorithm},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={11},
number={2},
pages={255-265},
document_type={Article},
} 

@ARTICLE{
author={Bozic Milos,Ducic Nedeljko,Djordjevic Goran Lj,Slavkovic Radomir},
year={2017},
title={Optimization of Wheg Robot Running with Simulation of Neuro-Fuzzy Control},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={16},
number={1},
pages={19-30},
document_type={Article},
} 

@ARTICLE{
author={Ducic Nedeljko,Cojbasic Zarko M,Slavkovic Radomir,Jordovic Branka A,Purenovic Jelena M},
year={2016},
title={Optimization of chemical composition in the manufacturing process of flotation balls based on intelligent soft sensing},
journal={HEMIJSKA INDUSTRIJA},
volume={70},
number={6},
pages={603-612},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Veg Aleksandar,Ducic Nedeljko G,Slavkovic Nikola R,Baralic Jelena C,Milicevic Ivan},
year={2015},
title={Rigid Body Dynamics in Optimization of the Machine Tool Vibroisolation},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={1},
pages={87-94},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Jugovic Zvonimir S,Dragicevic Snezana M,Jovicic Aleksandar,Slavkovic Vladimir},
year={2013},
title={An application of learning machine methods in prediction of wear rate of wear resistant casting parts},
journal={COMPUTERS & INDUSTRIAL ENGINEERING},
volume={64},
number={3},
pages={850-857},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Jugovic Zvonimir S,Kozak Drazan V,Veg Aleksandar,Radisa Radomir,Dragicevic Snezana M,Popovic Marko},
year={2013},
title={Simulation of the Casting Process - a Powerfull Tool for Enchanced Design of the Cutting Teeth in Surface Mining},
journal={METALURGIJA},
volume={52},
number={3},
pages={293-296},
document_type={Article},
} 

@ARTICLE{
author={Jugovic Zvonimir S,Bjekic Miroslav M,Slavkovic Radomir,Bozic Milos,Ducic Nedeljko},
year={2012},
title={Development of Laboratory Prototype of Cnc Machine with 2d Control},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={395-400},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milicevic Ivan,Slavkovic Radomir,Golubovic Dragan,Jugovic Zvonimir S,Popovic Marko},
year={2012},
title={Application of the Newton-Raphson Procedures as a Base for the Computations by Finite Elements Method in Nonlinear Structural Analysis},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={219-224},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milicevic Ivan,Slavkovic Radomir,Golubovic Dragan,Jugovic Zvonimir S,Popovic Marko},
year={2012},
title={Transformation matrix approach for solving of Dynamics of systems of multibody mechanisms},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={3},
pages={1224-1231},
document_type={Article},
} 

@ARTICLE{
author={Milicevic Ivan,Slavkovic Radomir,Golubovic Dragan,Nedic Novak N,Radonjic Snezana},
year={2012},
title={Applications of PC for identification and simulation of kinematics and dynamics in process of design and analysis of industrial robots},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={3},
pages={1201-1211},
document_type={Article},
} 

@ARTICLE{
author={Dragicevic Snezana M,Jugovic Zvonimir S,Slavkovic Radomir,Popovic Marko},
year={2012},
title={Analysis of substituting coal-based electricity generation for small hydro plants in power sector in Serbia},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={3},
pages={1196-1200},
document_type={Article},
} 

@ARTICLE{
author={Radonjic Snezana,Kovac Pavel P,Slavkovic Radomir,Ducic Nedeljko G,Baralic Jelena C},
year={2012},
title={Experimental determination of chip compression ratio during counterboring},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={2},
pages={539-543},
document_type={Article},
} 

@ARTICLE{
author={Jugovic Zvonimir S,Slavkovic Radomir,Milicevic Ivan,Dragicevic Snezana M,Savic Biljana R,Slavkovic Nikola R},
year={2012},
title={Possibility of Obtaining Favorable Mechanical Properties of Materials for Machine Elements Exposed to Wearing and Abrasion},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={7},
pages={17-21},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Arsovski Slavko M,Veg Aleksandar,Jugovic Zvonimir S,Jovicic Aleksandar,Ducic Nedeljko},
year={2012},
title={Casting Process Optimization by the Regression Analysis Applied on the Wear Resistant Parts Molding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={19},
number={1},
pages={141-146},
document_type={Article},
} 

@ARTICLE{
author={Bojic Nada V,Jugovic Zvonimir S,Dragicevic Snezana M,Slavkovic Radomir},
year={2012},
title={Comparative Study of the Tensile Stress of Diagonal Sieves Produced by Plasma Welding and Hard Soldering Process},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={5},
pages={25-29},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Milicevic Ivan,Jugovic Zvonimir S,Dragicevic Snezana M},
year={2012},
title={Concept of Advanced Technology Development of Special Technological Equipment for Processing Industry},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={2},
pages={15-20},
document_type={Article},
} 

@ARTICLE{
author={Popovic Marko,Jugovic Zvonimir S,Slavkovic Radomir,Dragicevic Snezana M,Milicevic Ivan},
year={2012},
title={Analysis of the Excavator'S Cutting Teeth Load Capacity by Applying Functional Virtual Prototypes},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={3},
pages={58-63},
document_type={Article},
} 

@ARTICLE{
author={Milicevic Ivan,Boskovic Nikola,Slavkovic Radomir,Golubovic Dragan,Jugovic Zvonimir S,Popovic Marko},
year={2012},
title={Design and Simulation of Automation Control of Mechatronic System for Production of Stainless Steel Wired Profiles Wedge Shaped},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={3},
pages={25-32},
document_type={Article},
} 

@ARTICLE{
author={Slavkovic Radomir,Jugovic Zvonimir S,Milicevic Ivan,Popovic Marko,Ducic Nedeljko,Nedeljkovic Borivoje},
year={2012},
title={Simulation Methodology as the Basis of Cad/Cam/Cae Design of Dynamically Loaded Castings in Machine Building},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={4},
pages={19-26},
document_type={Article},
}