@ARTICLE{
author={Mastilovic Sreten V,Djordjevic Branislav R,Sedmak Aleksandar S},
year={2026},
title={On size effect and scaling behavior of ferritic steels in and near the ductile-brittle transition region},
journal={INTERNATIONAL JOURNAL OF DAMAGE MECHANICS},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Veljic Darko M,Medjo Bojan I,Alic Fikret I,Sedmak Aleksandar S,Lazovic Tatjana M},
year={2026},
title={Influence of the Joint Geometry on Heat Energy, Generated During the Plunge Stage of Friction Stir Welding},
journal={THERMAL SCIENCE},
volume={30},
number={2B},
pages={1563-1572},
document_type={Article},
} 

@ARTICLE{
author={Hou Yanfang,Tu Shengwen,Kozak Drazan V,Gubeljak Nenad,Sedmak Aleksandar S},
year={2026},
title={Effect of misalignment types on the buckling behavior of large diameter girth-welded pipelines},
journal={INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING},
volume={222},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Dikic Stefan,Radovic Ljubica M,Radovic Nenad A},
year={2026},
title={Fracture Behavior of Hadfield Cast Steels Exposed to Impact Loading},
journal={METALS},
volume={16},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Adamovic Dragan D,Sedmak Aleksandar S,Delic Marko,Vulovic Radun},
year={2026},
title={A new artificial neural network model for prediction of fatigue strength and yield strength of various steel grades},
journal={ENGINEERING FRACTURE MECHANICS},
volume={337},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Simon A,Sedmak Aleksandar S,Vucetic Filip,Monkova Katarina},
year={2026},
title={Influence of Infill Density on the Fatigue Performance of FDM-Manufactured Orthopaedic Plates},
journal={MATERIALS},
volume={19},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Paunic Milovan R,Galatanu Sergiu-Valentin,Filipovic Ivana,Milosevic Milos,Marsavina Liviu,Sedmak Aleksandar S},
year={2025},
title={Impact Properties of FDM-Grade PLA Polymer Relative to Infill Density},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={2},
pages={227-235},
document_type={Article},
} 

@ARTICLE{
author={Ivic-Nikolic Milica,Jovanovic Snezana,Nikolic Aleksandar,Djordjevic Branislav R,Sedmak Aleksandar S,Petrovic Ana S},
year={2025},
title={Some Remarks on the Basic Principles of Ultrasonic Welding of Conductors in the Automotive Industry},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={2},
pages={221-226},
document_type={Article},
} 

@ARTICLE{
author={Kostic Nikola,Camagic Ivica R,Sedmak Aleksandar S,Joksic Snezana M,Sedmak Simon A,Milic Vojin,Burzic Zijah H},
year={2025},
title={Repair and Structural Integrity Assessment of a Large Spherical Tank},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={2},
pages={189-192},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Petrovic Ivana,Milosevic Milos,Dascau Calin,Milovanovic Aleksa Lj,Vulovic Radun},
year={2025},
title={Digital Twin-Based Numerical Simulation of Stress Distribution in the Mandible with Dental Implants},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={2},
pages={161-167},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Petrovic Ivana,Milosevic Milos,Dascau Calin,Golubovic Tamara A,Vulovic Radun},
year={2025},
title={Effect of Dental Implants Loading and Design on Stress Distribution in a Mandible Bone},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={3},
pages={521-524},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Colic Katarina G,Sedmak Simon A},
year={2025},
title={Structural Integrity and Life of Hip Implants: Review of Case Studies Integritet I Vek Veštačkih Kukova: Pregled Studije Slučajeva},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={3},
pages={509-520},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko D,Dojcinovic Marina B,Sedmak Aleksandar S,Popovic Olivera D,Lazovic Vladimir M},
year={2025},
title={Cavitation Erosion-Process and Development of Testing Methods},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={3},
pages={393-398},
document_type={Article},
} 

@ARTICLE{
author={Golubovic Zorana Z,Bojovic Bozica A,Kirin Snezana D,Milovanovic Aleksa Lj,Danilov Ivan R,Sedmak Aleksandar S},
year={2025},
title={A Comparative Study on the Tensile Properties of 3D Printed ABS Filament and Resin: Effects of Aging},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={3},
pages={381-386},
document_type={Article},
} 

@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Tadic Srdjan S,Perkovic Srdja,Radovic Nenad A},
year={2025},
title={The Effect of Composition and Heat Treatment on Impact Toughness of Hadfield Steel},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={32},
number={6},
pages={2217-2222},
document_type={Article},
} 

@ARTICLE{
author={Kostic Nikola,Camagic Ivica R,Sedmak Aleksandar S,Sedmak Simon A,Burzic Zijah H},
year={2025},
title={Impact Toughness of A516 Gr. 60 Steel Simulated Heat-Affected-Zone},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={1},
pages={15-18},
document_type={Article},
} 

@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Tadic Srdjan S,Radovic Ljubica M,Radovic Nenad A},
year={2025},
title={Influence of Chemical Composition and Heat Treatmenton Hardness and Strength of a Hadfield Steel},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={1},
pages={11-14},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Perkovic Srdja,Burzic Zijah H,Tadic Srdjan S,Milovanovic Nikola A},
year={2025},
title={Temperature and Stress Concentration Effects on Crack Initiation and Propagation Energies of a Duplex Steel Weldments},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={1},
pages={7-10},
document_type={Article},
} 

@ARTICLE{
author={Vucetic Filip,Djordjevic Branislav R,Radu Dorin,Dikic Stefan,Jeremic Lazar D,Milovanovic Nikola A,Sedmak Aleksandar S},
year={2025},
title={Mechanical Properties of Repaired Welded Pipe Joints Made of Heat-Resistant Steel P92},
journal={MATERIALS},
volume={18},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Perkovic Srdja,Burzic Zijah H,Tadic Srdjan S,Radakovic Zoran J,Sedmak Simon A,Milovanovic Nikola A},
year={2025},
title={Notch vs. Crack Effects on Impact Toughness and Fracture Behavior of a Duplex Steel Weldments},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Sedmak Simon A},
year={2025},
title={Structural integrity and life assessment of railway and aeronautical components - Review of four case studies},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={139},
number={},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Miladinov Milan M,Djordjevic Branislav R,Sedmak Simon A,Vucetic Filip,Jeremic Lazar D,Sedmak Aleksandar S,Popovic Olivera D},
year={2025},
title={Cracking of HSLA Steel Nioval 47 Caused by Exploitation Condition and Repair Welding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={32},
number={2},
pages={683-691},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Ana S,Momcilovic Nikola V,Sedmak Aleksandar S,Djordjevic Branislav R,Radu Dorin,Milosevic-Mitic Vesna O,Bogojevic Aleksandar R},
year={2025},
title={Reliability-based approach for structural integrity assessment of a bucket wheel excavator},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={136},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S,Popovic Vladimir M,Sedmak Simon A,Bozic Zeljko},
year={2025},
title={Fatigue remaining life prediction of high pressure turbine casing with unacceptable defects},
journal={ENGINEERING FAILURE ANALYSIS},
volume={167},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Paunic Milovan R,Mitrovic Aleksandra,Popovic Mihajlo D,Milosevic Milos S},
year={2024},
title={Tensile Properties of Purepla Polymer Dedicated for Additive Manufacturing},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={3},
pages={263-268},
document_type={Article},
} 

@ARTICLE{
author={Kostic Nikola,Camagic Ivica R,Sedmak Aleksandar S,Burzic Zijah H,Sedmak Simon A,Mandic Goran,Ostojin Milan},
year={2024},
title={Impact Toughness Behaviour of A516 Gr. 60 Steel Welded Joints},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={2},
pages={232-239},
document_type={Article},
} 

@ARTICLE{
author={Miladinov Milan M,Djordjevic Branislav R,Sedmak Simon A,Bratu Ciprian,Radu Dorin,Sedmak Aleksandar S,Aleksic Nikola},
year={2024},
title={Damage Analysis and Restoring of Structural Integrity of Pelton Runner After Repair Welding: Case Study},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={2},
pages={217-221},
document_type={Article},
} 

@ARTICLE{
author={Alberti Fabio,D'Andrea Danilo,Macor Alarico,Risitano Giacomo,Rossetti Antonio,Sedmak Aleksandar S},
year={2024},
title={Novel Smart Design of Rear Half Shaft of Large Urban Transport Vehicle},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={22},
number={4},
pages={583-599},
document_type={Article},
} 

@ARTICLE{
author={Kostic Nikola,Camagic Ivica R,Sedmak Aleksandar S,Jovanovic Milivoje,Burzic Zijah H,Golubovic Tamara,Sedmak Simon A,Martic Igor I},
year={2024},
title={Fracture and Fatigue Crack Growth Behaviour of A516 Gr 60 Steel Welded Joints},
journal={METALS},
volume={14},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Gubeljak Nenad,Sedmak Simon A,Budimir Nikola J},
year={2024},
title={Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM-A Review of Case Studies},
journal={MATERIALS},
volume={17},
number={22},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S,Bozic Zeljko},
year={2024},
title={Three-Parameter Optimisation of An Attachment Lug},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={124-127},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Andrijana A,Djurdjevic Djordje,Bucanovic Ljubisa J,Zivkovic Aleksandar B,Sedmak Aleksandar S},
year={2024},
title={Production Development of Aa 5754-H111 Lap Joint by Friction Stir Welding},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={83-86},
document_type={Article},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Vucetic Nedeljka,Milosevic Milos S,Sedmak Simon A},
year={2024},
title={Finite Element Stress State Analysis of Mini Dental Implants},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={29-32},
document_type={Article},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Simon A,Sedmak Aleksandar S,Milovanovic Aleksa Lj,Milosevic Milos S},
year={2024},
title={Numerical Analysis of Static Stresses in Partial Hip Implant},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={17-20},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Musrati Walid,Medjo Bojan I,Sedmak Aleksandar S,Radovic Nenad A},
year={2024},
title={Numerical Simulation of Friction Stir Welding- the Plunge Stage in T-Joint},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={105-110},
document_type={Article},
} 

@ARTICLE{
author={Smoljanic Tamara,Milovic Ljubica P,Sedmak Simon A,Milovanovic Aleksa Lj,Colic Katarina G,Radakovic Zoran J,Sedmak Aleksandar S},
year={2024},
title={Numerical Investigation of Fatigue Behavior in Ti-6Al-4V Orthopedic Hip Implants Subjected to Different Environments},
journal={MATERIALS},
volume={17},
number={15},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mastilovic Sreten V,Djordjevic Branislav R,Sedmak Aleksandar S,Kirin Snezana D},
year={2024},
title={Data-driven prediction of fracture toughness size effect in ductile-to-brittle transition using Two-Step-Scaling procedure},
journal={ENGINEERING FRACTURE MECHANICS},
volume={307},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vuksic-Popovic Marija,Momcilovic Dejan B,Tanaskovic Jovan D,Sedmak Aleksandar S},
year={2024},
title={Testing of the condition and performance of coupling links from screw couplings of train},
journal={ENGINEERING FAILURE ANALYSIS},
volume={161},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Montanari Matteo,Golubovic Zorana Z,Marghitas Mihai P,Spagnoli Andrea,Brighenti Roberto,Sedmak Aleksandar S},
year={2024},
title={Compressive and flexural mechanical responses of components obtained through mSLA vat photopolymerization technology},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={131},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Radu Dorin,Arandjelovic Mihajlo,Sedmak Simon A,Bancila Radu},
year={2024},
title={Residual life assessment of the historical road riveted bridges},
journal={ENGINEERING FRACTURE MECHANICS},
volume={299},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Djordjevic Branislav R,Sedmak Simon A,Radu Dorin,Petrovic Ana S,Dikic Stefan,Sedmak Aleksandar S},
year={2024},
title={Failure analysis of welded joint with multiple defects by extended Finite Element Method and Engineering Critical Analysis},
journal={ENGINEERING FAILURE ANALYSIS},
volume={160},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S},
year={2024},
title={Fatigue crack growth simulation by extended finite element method: A review of case studies},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={47},
number={6},
pages={1819-1855},
document_type={Review},
} 

@ARTICLE{
author={Opacic Mirjana F,Sedmak Aleksandar S,Bakic Gordana M,Milosevic Nenad Z,Milovanovic Nikola A},
year={2024},
title={Risk Assessment of Pressure Vessels by Using Fracture Mechanics and Advanced Ultrasonic Testing},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={31},
number={1},
pages={118-124},
document_type={Article},
} 

@ARTICLE{
author={Jelic Mirjana,Sedmak Aleksandar S,Folic Boris R,Sedmak Simon A,Arandjelovic Mihajlo,Folic Radomir J,Radu Dorin},
year={2024},
title={Structural integrity analysis of the pre-stressed concrete dome of the Belgrade fair hall 1},
journal={FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY},
volume={},
number={67},
pages={337-351},
document_type={Article},
} 

@ARTICLE{
author={Smoljanic Tamara,Milovanovic Aleksa Lj,Sedmak Simon A,Milovic Ljubica P,Sedmak Aleksandar S},
year={2023},
title={Numerical simulation of titanium alloy hip replacement implants behaviour under static and dynamic loads},
journal={HEMIJSKA INDUSTRIJA},
volume={77},
number={4},
pages={283-292},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Sedmak Aleksandar S,Lazic-Vulicevic Ljubica,Zaidi Radzeya,Vitas Nikola D,Kirin Snezana D},
year={2023},
title={Extended Finite Element Method Simulation of Fatigue Crack Growth in a Charpy Specimen},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={235-238},
document_type={Editorial Material},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Zaidi Radzeya,Kirin Snezana D,Vitas Nikola D,Golubovic Tamara A,Vucetic Ivana T},
year={2023},
title={Numerical, Analytical and Experimental Determination of Remaining Life of a Pipe with An Axial Crack},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={239-244},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Aleksandar NE,Bakic Gordana M,Golubovic Tamara A,Kirin Snezana D,Sedmak Aleksandar S},
year={2023},
title={Integrity and Risk Assessment of Reconstructed Steam Line},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={367-371},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Milosevic Milos S,Colic Katarina G,Petrovic Ivana},
year={2023},
title={Effect of Facet Material on Stress Distribution in Dental Implants},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={363-366},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S},
year={2023},
title={Numerical and Experimental Analysis of the Integrity of Light Aircraft Wing Structure},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={167-172},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S},
year={2023},
title={Optimisation of Wing-Fuselage Attachment Lug},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mastilovic Sreten V,Djordjevic Branislav R,Sedmak Aleksandar S,Kirin Snezana D},
year={2023},
title={Size Effect Assessment of K<Sub>Jc</Sub> Experimental Data Using the Two-Step-Scaling Method},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={105-110},
document_type={Article},
} 

@ARTICLE{
author={Petrov Ljubisa,Bojovic Bozica A,Golubovic Zorana Z,Sedmak Aleksandar S,Miskovic Zarko Z,Trajkovic Isaak D,Milosevic Milos S},
year={2023},
title={Experimental Mechanical Characterization of Parts Manufactured by Sla and Dlp Technologies},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={117-121},
document_type={Article},
} 

@ARTICLE{
author={Smoljanic Tamara,Milovanovic Aleksa Lj,Sedmak Simon A,Milovic Ljubica P,Sedmak Aleksandar S},
year={2023},
title={Numerical simulation of titanium alloy hip replacement implants behaviour under static and dynamic loads},
journal={HEMIJSKA INDUSTRIJA},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Djordjevic Branislav R,Mastilovic Sreten V,Sedmak Aleksandar S,Dimic Aleksandar R,Kljajin Milan},
year={2023},
title={Ductile-to-brittle transition of ferritic steels: A historical sketch and some recent trends},
journal={ENGINEERING FRACTURE MECHANICS},
volume={293},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Golubovic Zorana Z,Danilov Ivan R,Bojovic Bozica A,Petrov Ljubisa,Sedmak Aleksandar S,Miskovic Zarko Z,Mitrovic Nenad R},
year={2023},
title={A Comprehensive Mechanical Examination of ABS and ABS-like Polymers Additively Manufactured by Material Extrusion and Vat Photopolymerization Processes},
journal={POLYMERS},
volume={15},
number={21},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Trajkovic Isaak D,Rakin Marko P,Milosevic Milos S,Mitrovic Nenad R,Travica Milan N,Sedmak Aleksandar S,Medjo Bojan I},
year={2023},
title={Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials},
journal={ENGINEERING FRACTURE MECHANICS},
volume={292},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Ivana M,Golubovic Zorana Z,Mladenovic Goran MO,Berto Filippo,Sedmak Aleksandar S,Milovanovic Aleksa Lj,Milosevic Milos S},
year={2023},
title={Printing orientation influence on tensile strength of PA12 specimens obtained by SLS},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5549-5554},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Golubovic Zorana Z,Kirin Snezana D,Babinsky Tomas,Sulak Ivo,Milosevic Milos S,Sedmak Aleksandar S},
year={2023},
title={Manufacturing parameter influence on FDM polypropylene tensile properties},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5541-5547},
document_type={Article},
} 

@ARTICLE{
author={Raicevic Nikola G,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S},
year={2023},
title={Fatigue life prediction of topologically optimized torque link adjusted for additive manufacturing},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={176},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Doncheva Elisaveta,Medjo Bojan I,Rakin Marko P,Milosevic Nenad Z,Radu Dorin},
year={2023},
title={Crack Size and Undermatching Effects on Fracture Behavior of a Welded Joint},
journal={MATERIALS},
volume={16},
number={13},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Prokic-Cvetkovic Radica,Sedmak Aleksandar S,Popovic Olivera D,Cvetkovic Ivana,Radu Dorin},
year={2023},
title={Effect of Shielding Gas Arc Welding Process on Cavitation Resistance of Welded Joints of AlMg4.5Mn Alloy},
journal={MATERIALS},
volume={16},
number={13},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Perkovic Srdja,Sedmak Aleksandar S,Radakovic Zoran J,Burzic Zijah H,Sedmak Simon A,Radovic Ljubica M,Mandic Jovana D},
year={2023},
title={Effect of Temperature on S32750 Duplex Steel Welded Joint Impact Toughness},
journal={MATERIALS},
volume={16},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Zoran,Burzic Zijah H,Sedmak Aleksandar S,Grbovic Aleksandar M,Kostic Nikola},
year={2023},
title={Corrosion Effect on the Remaining Life of Aa2024-T351 Components Uticaj Korozije Na Preostali Vek Komponenata Od Aa2024-T351},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={1},
pages={98-101},
document_type={Editorial Material},
} 

@ARTICLE{
author={Perkovic Srdja,Radakovic Zoran J,Burzic Zijah H,Sedmak Simon A,Sedmak Aleksandar S,Radovic Ljubica M},
year={2023},
title={Stress Concentration Effects on Toughness Value of Duplex Steel S32750},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={1},
pages={3-7},
document_type={Article},
} 

@ARTICLE{
author={Adziev Gorgi,Sedmak Aleksandar S,Sedmak Simon A,Adziev Todor,Radakovic Zoran J},
year={2023},
title={Crack tip fields effects on crack propagation through the heat affected zone in an overmatched welded joint},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={46},
number={8},
pages={3014-3028},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Radovic Nenad A,Rakin Marko P,Sedmak Aleksandar S,Medjo Bojan I,Mrdak Mihailo R,Bajic Darko R},
year={2023},
title={Influence of Temperature and Plastic Deformation on AA2024 T3 Friction Stir Welded Joint Microstructure},
journal={THERMAL SCIENCE},
volume={27},
number={1},
pages={311-320},
document_type={Article},
} 

@ARTICLE{
author={Prokic-Cvetkovic Radica,Popovic Olivera D,Radovic Ljubica M,Sedmak Aleksandar S,Cvetkovic Ivana},
year={2023},
title={Fracture Behavior of AlMg4.5Mn Weld Metal at Different Temperatures under Impact Loading},
journal={SUSTAINABILITY},
volume={15},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Petrovic Ana S,Djordjevic Branislav R,Sedmak Simon A,Sedmak Aleksandar S,Dikic Stefan,Radu Dorin},
year={2023},
title={Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach},
journal={SUSTAINABILITY},
volume={15},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Smoljanic Tamara,Sedmak Simon A,Sedmak Aleksandar S,Burzic Zijah H,Milovanovic Aleksa Lj},
year={2022},
title={Experimental and Numerical Investigation of Ti-6al-4v Alloy Behaviour Under Different Exploitation Conditions},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={3},
pages={353-357},
document_type={Article},
} 

@ARTICLE{
author={Vucetic Trivun,Petrovski Blagoj,Markovic Zlatan,Jeremic Lazar D,Milosevic Nenad Z,Sedmak Aleksandar S,Milovanovic Nikola A},
year={2022},
title={Stiffener as a Special Design Solution for Pressure Vessel Repair},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={3},
pages={263-266},
document_type={Article},
} 

@ARTICLE{
author={Travica Milan N,Mitrovic Nenad R,Petrovic Aleksandar Lj,Trajkovic Isaak D,Milosevic Milos S,Sedmak Aleksandar S,Berto Filippo},
year={2022},
title={Experimental Evaluation of Hoop Stress-Strain State of 3D-Printed Pipe Ring Tensile Specimens},
journal={METALS},
volume={12},
number={10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Kovic Milos,Kirin Snezana D},
year={2022},
title={Structural Integrity-Historical Context},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={29},
number={5},
pages={1770-1776},
document_type={Article},
} 

@ARTICLE{
author={Mastilovic Sreten V,Djordjevic Branislav R,Sedmak Aleksandar S},
year={2022},
title={A scaling approach to size effect modeling of J(c) CDF for 20MnMoNi55 reactor steel in transition temperature region (vol 131, 105838, 2022)},
journal={ENGINEERING FAILURE ANALYSIS},
volume={142},
number={},
pages={-},
document_type={Correction},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Petrovski Blagoj,Sghayer Abulgasem,Sedmak Simon A,Berto Filippo,Djurdjevic Andrijana A},
year={2022},
title={The effects of welded clips on fatigue crack growth in AA6156 T6 panels},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={165},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milivoje,Camagic Ivica R,Sedmak Simon A,Sedmak Aleksandar S,Burzic Zijah H},
year={2022},
title={Effect of material heterogeneity and testing temperature on fatigue behaviour of Cr-Mo steel welded joints},
journal={ENGINEERING FAILURE ANALYSIS},
volume={141},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Zaidi Radzeya,Vujicic Borivoje,Sarkocevic Zivce S,Kirin Snezana D,Stamenic Zoran V,Djukic Milos B,Bakic Gordana M},
year={2022},
title={Corrosion effects on structural integrity and life of oil rig drill pipes},
journal={HEMIJSKA INDUSTRIJA},
volume={76},
number={3},
pages={167-177},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Rakin Marko P,Sedmak Aleksandar S,Radovic Nenad A,Medjo Bojan I,Mrdak Mihailo R,Bajic Darko R},
year={2022},
title={Thermo-Mechanical Analysis of Linear Welding Stage in Friction Stir Welding Influence of Welding Parameters},
journal={THERMAL SCIENCE},
volume={26},
number={3},
pages={2125-2134},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Sedmak Simon A,Kirin Snezana D,Berto Filippo},
year={2022},
title={Fatigue life assessment of orthopedic plates made of Ti6Al4V},
journal={ENGINEERING FAILURE ANALYSIS},
volume={137},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Bozic Zeljko,Bozic Ivan O,Obradovic Aleksandar M,Sedmak Aleksandar S,Sedmak Simon A},
year={2022},
title={Experimental and numerical evaluation of fracture characteristics of composite material used in the aircraft engine cover manufacturing},
journal={ENGINEERING FAILURE ANALYSIS},
volume={137},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Bozic Zeljko,Sedmak Simon A,Lozanovic-Sajic Jasmina V},
year={2022},
title={Fatigue crack growth in locking compression plates},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={157},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Zaidi Radzeya,Sedmak Aleksandar S,Kirin Snezana D,Martic Igor I,Sarkocevic Zivce S},
year={2022},
title={Structural Integrity and Life Assessment of Oil Drilling Rig Pipes Using Analytical Method},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={1},
pages={63-68},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milivoje,Camagic Ivica R,Sedmak Simon A,Sedmak Aleksandar S,Burzic Zijah H},
year={2022},
title={The Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints},
journal={MATERIALS},
volume={15},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Burzic Zijah H,Sedmak Aleksandar S,Sedmak Simon A,Perkovic Srdja,Arandjelovic Mihajlo},
year={2022},
title={Analysis of fatigue behaviour of a bridge welded structure},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2021)},
volume={37},
number={},
pages={269-273},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Arsic Miodrag A,Milovanovic Nikola A,Opacic Mirjana F,Djordjevic Branislav R},
year={2022},
title={Structural Integrity Analysis of a Kaplan Turbine Cover},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2021)},
volume={37},
number={},
pages={263-268},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mastilovic Sreten V,Djordjevic Branislav R,Sedmak Aleksandar S},
year={2022},
title={A scaling approach to size effect modeling of J(c) CDF for 20MnMoNi55 reactor steel in transition temperature region},
journal={ENGINEERING FAILURE ANALYSIS},
volume={131},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag,Flajs Zeljko R,Sedmak Aleksandar S,Veg Emil A,Sedmak Simon A},
year={2021},
title={Structural Integrity Assessment of Welded Bucket-Wheel Boom},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={2},
pages={201-206},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Zoran,Burzic Zijah H,Perkovic Srdja,Sedmak Aleksandar S,Tadic Srdjan S},
year={2021},
title={Corrosion Effect on Mechanical Properties of Aluminium Alloys 2024-T351 and 7075-T651},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={2},
pages={197-200},
document_type={Article},
} 

@ARTICLE{
author={Jovicic Radomir D,Jeremic Lazar D,Milosevic Nenad Z,Sedmak Aleksandar S,Milovanovic Nikola A},
year={2021},
title={Repair Welding of Pressure Equipment with Unacceptable Defects},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={2},
pages={163-167},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Shlyannikov Valery,Correia Jose,Infante Virginia},
year={2021},
title={Editorial - Damage, cracks and failure analysis},
journal={ENGINEERING FAILURE ANALYSIS},
volume={130},
number={},
pages={-},
document_type={Editorial Material},
} 

@ARTICLE{
author={Elmiladi Abdulrazag Abdallah,Petrovic Veljko M,Grbovic Aleksandar M,Sedmak Aleksandar S,Balac Igor M},
year={2021},
title={Numerical Evaluation of Thermal Stresses Generated in Laminated Composite Structure Exposed to Low Temperatures},
journal={THERMAL SCIENCE},
volume={25},
number={5},
pages={3847-3856},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Nenad Z,Younise Bashir,Sedmak Aleksandar S,Travica Milan N,Mitrovic Aleksandra},
year={2021},
title={Evaluation of true stress-strain diagrams for welded joints by application of Digital Image Correlation},
journal={ENGINEERING FAILURE ANALYSIS},
volume={128},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Nenad Z,Sedmak Aleksandar S,Bakic Gordana M,Lazic Vukic N,Milosevic Milos S,Mladenovic Goran MO,Maslarevic Aleksandar M},
year={2021},
title={Determination of the Actual Stress-Strain Diagram for Undermatching Welded Joint Using DIC and FEM},
journal={MATERIALS},
volume={14},
number={16},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jelic Mirjana,Sedmak Aleksandar S,Sedmak Simon A,Folic Boris R,Folic Radomir J},
year={2021},
title={Numerical simulation of "Hall 1 of the Belgrade Fair"},
journal={ENGINEERING FAILURE ANALYSIS},
volume={127},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Elayeb Abdelnaser Abdusalam,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Valenta Tomas,Ivanovic Ivana B,Sedmak Aleksandar S},
year={2021},
title={Fatigue crack growth in a structure exposed to high temperature},
journal={ENGINEERING FAILURE ANALYSIS},
volume={127},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kastratovic Gordana M,Grbovic Aleksandar M,Sedmak Aleksandar S,Bozic Z,Sedmak Simon A},
year={2021},
title={Composite material selection for aircraft structures based on experimental and numerical evaluation of mechanical properties},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020)},
volume={31},
number={},
pages={127-133},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Golubovic Zorana Z,Milosevic Milos S},
year={2021},
title={Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020)},
volume={31},
number={},
pages={122-126},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jovanovic Milivoje,Camagic Ivica R,Sedmak Aleksandar S,Burzic Zijah H,Sedmak Simon A,Zivkovic Predrag V},
year={2021},
title={Analysis of SA 387 Gr. 91 welded joints crack resistance under static and impact load},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020)},
volume={31},
number={},
pages={38-44},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosevic Nenad Z,Sedmak Aleksandar S,Martic Igor I,Prokic-Cvetkovic Radica},
year={2021},
title={Novel Procedure to Determine Actual Stress-Strain Curves},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={1},
pages={37-40},
document_type={Article},
} 

@ARTICLE{
author={Jeremic Lazar D,Sedmak Aleksandar S,Milovanovic Nikola A,Milosevic Nenad Z,Sedmak Simon A},
year={2021},
title={Assessment of Integrity of Pressure Vessels for Compressed Air},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={1},
pages={3-6},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Sedmak Aleksandar S,Li Wei,Brzakovic Miodrag,Miljanovic Igor M,Petrovic Ana S,Sedmak Simon A},
year={2021},
title={Human factor risk management procedures applied in the case of open pit mine},
journal={ENGINEERING FAILURE ANALYSIS},
volume={126},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Branislav R,Sedmak Aleksandar S,Petrovski Blagoj,Dimic Aleksandar R},
year={2021},
title={Probability distribution on cleavage fracture in function of Jc for reactor ferritic steel in transition temperature region},
journal={ENGINEERING FAILURE ANALYSIS},
volume={125},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Golubovic Zorana Z,Zelic-Mihajlovic Ksenija,Zurkic Aleksandar,Trajkovic Isaak D,Milosevic Milos S},
year={2021},
title={The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners (vol 119, 104494, 2021)},
journal={JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS},
volume={120},
number={},
pages={-},
document_type={Correction},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Hemer Abubkr M,Sedmak Simon A,Milovic Ljubica P,Grbovic Aleksandar M,Cabrilo Aleksandar,Kljajin Milan},
year={2021},
title={Welded joint geometry effect on fatigue crack growth resistance in different metallic materials},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={150},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Golubovic Zorana Z,Zelic-Mihajlovic Ksenija,Zurkic Aleksandar,Trajkovic Isaak D,Milosevic Milos S},
year={2021},
title={The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners},
journal={JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS},
volume={119},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Alkateb Mohamed,Tadic Srdjan S,Sedmak Aleksandar S,Ivanovic Ivana B,Markovic Svetislav Lj},
year={2021},
title={Crack Growth Rate Analysis of Stress Corrosion Cracking},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={28},
number={1},
pages={240-247},
document_type={Article},
} 

@ARTICLE{
author={Djukic Milos B,Curtin William A,Zhang Zhiliang,Sedmak Aleksandar S},
year={2021},
title={Recent Advances on Hydrogen Embrittlement Understanding and Future Research Framework, Editorial},
journal={ENGINEERING FRACTURE MECHANICS},
volume={241},
number={},
pages={-},
document_type={Editorial Material},
} 

@ARTICLE{
author={Younise Bashir,Sedmak Aleksandar S,Milosevic Nenad Z,Rakin Marica B,Medjo Bojan I},
year={2020},
title={True Stress-strain Curves for HSLA Steel Weldment - Iteration Procedure Based on DIC and FEM},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1992-1997},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Golubovic Zorana Z,Mladenovic Goran MO,Colic Katarina G,Milosevic Milos S},
year={2020},
title={Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1963-1968},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jelic Mirjana,Sedmak Aleksandar S},
year={2020},
title={The largest pre-stressed concrete Dome in the world - the case study of "Hall 1 of the Belgrade Fair"},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1833-1838},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hemer Abubkr M,Sedmak Simon A,Milovic Ljubica P,Grbovic Aleksandar M,Sedmak Aleksandar S},
year={2020},
title={FEM simulation of welded joint geometry influence on fatigue crack growth resistance},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1827-1832},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Kirin Snezana D,Sarkocevic Zivce S,Zaidi Radzeya},
year={2020},
title={Material Effects on Risk Assessment of Residual Life of Oil Drilling Rig Pipe},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1315-1320},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kirin Snezana D,Li Wei,Brzakovic Miodrag,Miljanovic Igor M,Sedmak Aleksandar S},
year={2020},
title={Rules of Risk Management - Case Study of Open Pit Mine},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={764-769},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Sedmak Aleksandar S,Milovic Ljubica P,Maksimovic Ana D,Bozic Z},
year={2020},
title={Crack propagation in 3PB specimen made from welded joint},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={440-445},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Branislav R,Sedmak Aleksandar S,Petrovski Blagoj,Dimic Aleksandar R},
year={2020},
title={Weibull probability distribution for reactor steel 20MnMoNi55 cleavage fracture in transition temperature},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={295-300},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Matavz Albin,Krope Jurij,Goricanec Darko,Urbancl Danijela,Sedmak Aleksandar S,Anzel Ivan},
year={2020},
title={External Atmospheric Influences on the Mechanical Properties of Resin-Bonded Grinding Wheels with Aluminium Oxide and Silicon Carbide Grains},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={3},
pages={249-253},
document_type={Article},
} 

@ARTICLE{
author={Banks Sills Leslie,Sedmak Aleksandar S},
year={2020},
title={Linear Elastic and Elasto-Plastic Aspects of Interface Fracture Mechanics},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={3},
pages={203-210},
document_type={Article},
} 

@ARTICLE{
author={Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Petrovic Ana S,Sedmak Aleksandar S,Kozak Drazan V,Sedmak Simon A},
year={2020},
title={Numerical Simulation of Fatigue Crack Growth in Titanium Alloy Orthopaedic Plates},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={6},
pages={1917-1922},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Arsic Miodrag A,Sarkocevic Zivce S,Medjo Bojan I,Rakin Marko P,Arsic Dusan M,Lazic Vukic N},
year={2020},
title={Remaining strength of API J55 steel casing pipes damaged by corrosion},
journal={INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING},
volume={188},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Bozic Zeljko,Kirin Snezana D,Kastratovic Gordana M,Sedmak Aleksandar S,Vidanovic Nenad D},
year={2020},
title={Fatigue life assessment of the structure with widespread damage exposed to high temperature},
journal={1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1)},
volume={26},
number={},
pages={402-408},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Mijatovic Tamara,Colic Katarina G},
year={2020},
title={Design Aspects of Hip Implant Made of Ti-6Al-4V Extra Low Interstitials Alloy},
journal={1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1)},
volume={26},
number={},
pages={299-305},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Branislav R,Sedmak Aleksandar S,Petrovski Blagoj,Sedmak Simon A,Radakovic Zoran J},
year={2020},
title={Load and Deformation Effects on Brittle Fracture of Ferritic Steel 20mnmoni 55 in Temperature Transition Region},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={2},
pages={184-189},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksandar M,Sedmak Aleksandar S,Gnjatovic Nebojsa B},
year={2020},
title={Application of Fracture Mechanics Parameters to Spherical Storage Tank Integrity Assessment},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={5},
pages={1592-1596},
document_type={Article},
} 

@ARTICLE{
author={Jeremic Lazar D,Sedmak Aleksandar S,Petrovski Blagoj,Djordjevic Branislav R,Sedmak Simon A},
year={2020},
title={Structural Integrity Assessment of Welded Pipeline Designed with Reduced Safety},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={5},
pages={1461-1466},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Zivkovic Jelena,Djordjevic Milan Lj,Mladenovic Goran MO},
year={2020},
title={Effect of Elevated Temperatures on Mechanical Properties of Ultra High Strength Hot Work Tool Steel H11},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={2},
pages={71-82},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marica B,Medjo Bojan I,Gubeljak Nenad,Sedmak Aleksandar S},
year={2020},
title={An Overview of Application of Micromechanical Models in Ductile Fracture Analysis of Welded Joints},
journal={THEORETICAL AND APPLIED MECHANICS},
volume={47},
number={1},
pages={33-62},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Jeremic Lazar D,Sedmak Aleksandar S,Martic Igor I,Sedmak Simon A,Vucetic Ivana T,Golubovic Tamara A},
year={2020},
title={Risk based analysis of RHPP penstock structural integrity},
journal={FRATTURA ED INTEGRITA STRUTTURALE},
volume={},
number={53},
pages={345-352},
document_type={Article},
} 

@ARTICLE{
author={Djukic Daniela,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S},
year={2020},
title={Stress intensity factors numerical calculations for two penny shaped cracks in the elastic solid},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Zaidi Radzeya,Sedmak Aleksandar S,Kirin Snezana D,Grbovic Aleksandar M,Li Wei,Lazic-Vulicevic Ljubica,Sarkocevic Zivce S},
year={2020},
title={Risk assessment of oil drilling rig welded pipe based on structural integrity and life estimation},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Solob A,Grbovic Aleksandar M,Bozic Zeljko,Sedmak Aleksandar S},
year={2020},
title={XFEM based analysis of fatigue crack growth in damaged wing-uselage attachment lug},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic N,Sedmak Aleksandar S,Arsic Miodrag A,Sedmak Aleksandar S,Bozic Zeljko},
year={2020},
title={Structural integrity and life assessment of rotating equipment},
journal={ENGINEERING FAILURE ANALYSIS},
volume={113},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Radu Dorin,Sedmak Aleksandar S,Sedmak Simon A,Li Wei},
year={2020},
title={Engineering critical assessment of steel shell structure elements welded joints under high cycle fatigue},
journal={ENGINEERING FAILURE ANALYSIS},
volume={114},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Sedmak Aleksandar S,Zaidi Radzeya,Grbovic Aleksandar M,Sarkocevic Zivce S},
year={2020},
title={Comparison of experimental, numerical and analytical risk assessment of oil drilling rig welded pipe based on fracture mechanics parameters},
journal={ENGINEERING FAILURE ANALYSIS},
volume={114},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Ivanovic Ivana B,Sedmak Aleksandar S,Lazic Mirjana M,Kalaba Dragan V,Cekovic Ivana R,Ratkovic Nada R},
year={2020},
title={Experimental and Numerical Study of Temperature Field During Hard-Facing of Different Carbon Steels},
journal={THERMAL SCIENCE},
volume={24},
number={3},
pages={2233-2241},
document_type={Article},
} 

@ARTICLE{
author={Sandic Uros,Tomic Radoljub P,Grbovic Aleksandar M,Sedmak Aleksandar S},
year={2020},
title={Failure Analysis of Bicycle Frame Composite Structure Based on Stacking Variant of Laminate Layers},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={1},
pages={69-76},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milivoje,Camagic Ivica R,Sedmak Aleksandar S,Zivkovic Predrag V,Sedmak Aleksandar S},
year={2020},
title={Crack Initiation and Propagation Resistance of Hsla Steel Welded Joint Constituents},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={1},
pages={11-14},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Stahle Per,Shlyannikov Valery,Sedmak Aleksandar S},
year={2020},
title={Editorial: Effects in Fracture},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={107},
number={},
pages={-},
document_type={Editorial Material},
} 

@ARTICLE{
author={Veljic Darko M,Rakin Marko P,Medjo Bojan I,Mrdak Mihailo R,Sedmak Aleksandar S},
year={2019},
title={Temperature Fields in Linear Stage of Friction Stir Welding Effect of Different Material Properties},
journal={THERMAL SCIENCE},
volume={23},
number={6},
pages={3985-3992},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Rakin Marko P,Medjo Bojan I,Younise Bashir},
year={2019},
title={Micromechanical Modelling of Ductile Fracture - Local Approach},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={25},
number={4},
pages={265-286},
document_type={Review},
} 

@ARTICLE{
author={Mijatovic Tamara,Milovanovic Aleksa Lj,Sedmak Aleksandar S,Milovic Ljubica P,Colic Katarina G},
year={2019},
title={Integrity Assessment of Reverse Engineered Ti-6Al-4V ELI Total Hip Replacement Implant},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={19},
number={3},
pages={237-242},
document_type={Article},
} 

@ARTICLE{
author={Camagic Ivica R,Sedmak Aleksandar S,Sedmak Simon A,Burzic Zijah H},
year={2019},
title={Relation between impact and fracture toughness of A-387 Gr. B welded joint},
journal={25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY},
volume={18},
number={},
pages={903-907},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Camagic Ivica R,Burzic Zijah H,Sedmak Simon A,Sedmak Aleksandar S,Lazarevic Dragan D},
year={2019},
title={Integrity and Life Assessment Procedure for a Reactor},
journal={25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY},
volume={18},
number={},
pages={385-390},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Camagic Ivica R,Kirin Snezana D,Sedmak Aleksandar S,Burzic Zijah H},
year={2019},
title={Risk based analysis of temperature and time effects on brittle fracture of A-387 Gr. B welded joint},
journal={25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY},
volume={18},
number={},
pages={379-384},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Camagic Ivica R,Sedmak Simon A,Sedmak Aleksandar S,Burzic Zijah H},
year={2019},
title={Influence of temperature on fracture toughness values in different regions of A-387 Gr. B welded joint},
journal={25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY},
volume={18},
number={},
pages={205-213},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Burzic Zijah H,Perkovic Srdja,Jovicic Radomir D,Arandjelovic Mihajlo,Radovic Ljiljana M,Ilic Nada M},
year={2019},
title={Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone},
journal={ENGINEERING FAILURE ANALYSIS},
volume={106},
number={},
pages={-},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Cabrilo Aleksandar,Sedmak Aleksandar S,Burzic Zijah H,Perkovic Srdja},
year={2019},
title={Fracture mechanics and fatigue crack propagation in armor steel welds},
journal={ENGINEERING FAILURE ANALYSIS},
volume={106},
number={},
pages={-},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Correia Jose AFO,De Jesus Abilio MP,Muniz-Calvente Miguel,Sedmak Aleksandar S,Moskvichev Vladimir,Calcada Rui},
year={2019},
title={The renewed TC12/ESIS technical committee - Risk analysis and safety of large structures and components},
journal={ENGINEERING FAILURE ANALYSIS},
volume={105},
number={},
pages={798-802},
document_type={Editorial Material},
} 

@ARTICLE{
author={Colic Katarina G,Grbovic Aleksandar M,Sedmak Aleksandar S,Legweel Khaled MB},
year={2019},
title={Application of Numerical Methods in Design and Analysis of Orthopedic Implant Integrity},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={96-111},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Djacic Slavisa,Sedmak Aleksandar S,Lazic Vukic N,Arsic Dusan M,Mutavdzic Milan},
year={2019},
title={Simulation of Flat Die Deep Drawing Process by Variable Contact Pressure Sliding Model},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={5},
pages={1199-1204},
document_type={Article},
} 

@ARTICLE{
author={Musrati Walid,Medjo Bojan I,Gubeljak Nenad,Stefane Primoz,Veljic Darko M,Sedmak Aleksandar S,Rakin Marko P},
year={2019},
title={Fracture assessment of seam and seamless steel pipes by application of the ring-shaped bending specimens},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={103},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Eldwaib Khalid Ahmed,Kirin Snezana D},
year={2019},
title={Determination of optimum wing spar cross section for maximum fatigue life},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={127},
number={},
pages={305-311},
document_type={Article},
} 

@ARTICLE{
author={Djukic Milos B,Bakic Gordana M,Sijacki-Zeravcic Vera M,Sedmak Aleksandar S,Rajicic Bratislav M},
year={2019},
title={The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion},
journal={ENGINEERING FRACTURE MECHANICS},
volume={216},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Colic Katarina G,Grbovic Aleksandar M,Balac Igor M,Burzic Meri},
year={2019},
title={Numerical analysis of fatigue crack growth of hip implant},
journal={ENGINEERING FRACTURE MECHANICS},
volume={216},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Martic Igor I,Sedmak Aleksandar S,Mitrovic Nenad R,Sedmak Simon A,Vucetic Ivana T},
year={2019},
title={Effect of Over-Pressure on Pipeline Structural Integrity},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={3},
pages={852-855},
document_type={Article},
} 

@ARTICLE{
author={Swei Mohamed,Sedmak Aleksandar S,Petrovski Blagoj,Golubovic Zorana Z,Sedmak Simon A,Katinic Marko D,Azzabi Khaled I},
year={2019},
title={Creep Crack Growth Behavior of P91 Steel Weldments},
journal={THERMAL SCIENCE},
volume={23},
number={2},
pages={1203-1209},
document_type={Article},
} 

@ARTICLE{
author={Correia Jose AFO,Berto Filippo,Ayatollahi Majid,Marsavina Liviu,Kotousov Andrei,Sedmak Aleksandar S},
year={2019},
title={Guest editorial: Advanced design and fatigue assessment of structural components},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={42},
number={6},
pages={1217-1218},
document_type={Editorial Material},
} 

@ARTICLE{
author={Vucetic Ivana T,Kirin Snezana D,Sedmak Aleksandar S,Golubovic Tamara A,Lazic Mirjana M},
year={2019},
title={Risk Management of a Hydro Power Plant - Fracture Mechanics Approach},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={2},
pages={428-432},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Sedmak Aleksandar S,Kastratovic Gordana M,Petrasinovic Danilo M,Vidanovic Nenad D,Sghayer Abulgasem},
year={2019},
title={Effect of laser beam welded reinforcement on integral skin panel fatigue life},
journal={ENGINEERING FAILURE ANALYSIS},
volume={101},
number={},
pages={383-393},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Balac Igor M,Popovic Mihajlo D},
year={2019},
title={Fatigue crack paths in light aircraft wing spars},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={123},
number={},
pages={96-104},
document_type={Article},
} 

@ARTICLE{
author={Vukojevic Vukoje,Jovic Srdjan,Nedeljkovic Blagoje,Sedmak Aleksandar S,Blacic Ivo D},
year={2019},
title={The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={13},
number={1},
pages={82-88},
document_type={Article},
} 

@ARTICLE{
author={Camagic Ivica R,Sedmak Simon A,Burzic Zijah H,Sedmak Aleksandar S},
year={2018},
title={Influence of temperature and exploitation time on hardness and micro-structure of a welded joint in a reactor mantle},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={2249-2254},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Veg Emil A,Sedmak Aleksandar S,Sinikovic Goran,Regodic Mladen},
year={2018},
title={Structural Integrity Assessment by Using Cross-Correlated Modal Identification},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={2245-2248},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Musrati Walid,Medjo Bojan I,Gubeljak Nenad,Stefane Primoz,Veljic Darko M,Sedmak Aleksandar S,Rakin Marko P},
year={2018},
title={Fracture analysis of axially flawed ring-shaped bending specimen},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={1828-1833},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Strieska Miroslav,Kotes Peter,Sedmak Aleksandar S},
year={2018},
title={Decreasing bridge member's resistance due to reinforcement corrosion},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={1745-1750},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosevic Nenad Z,Sedmak Aleksandar S,Jovicic Radomir D},
year={2018},
title={Analysis of strain distribution in overmatching V groove weld using digital image correlation},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={1600-1604},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksandar M,Sedmak Aleksandar S},
year={2018},
title={Integrity assessment of ammonia spherical storage tank},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={994-999},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djurdjevic Andrijana A,Sedmak Aleksandar S,Zivkovic Aleksandar B,Djurdjevic Djordje,Markovic Milan,Milcic Miodrag D},
year={2018},
title={Microhardness and Macrostructures of Friction Stir Welded T-joints},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={424-429},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Camagic Ivica R,Sedmak Simon A,Sedmak Aleksandar S,Burzic Zijah H,Marsenic Mladen},
year={2018},
title={Effect of temperature and exploitation time on tensile properties and plain strain fracture toughness, K-Ic, in a welded joint},
journal={IGF WORKSHOP FRACTURE AND STRUCTURAL INTEGRITY},
volume={9},
number={},
pages={279-286},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Eldwaib Khalid Ahmed,Grbovic Aleksandar M,Sedmak Aleksandar S,Kastratovic Gordana M,Petrasinovic Danilo M,Sedmak Simon A},
year={2018},
title={Fatigue Life Estimation of Damaged Integral Wing Spar Using XFEM},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={6},
pages={1837-1842},
document_type={Article},
} 

@ARTICLE{
author={Aldarwish Mustafa,Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Lazic Mirjana M},
year={2018},
title={Stress Intensity Factors Evaluation at Tips of Multi-Site Cracks in Unstiffened 2024-T3 Aluminium Panel Using XFEM},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={6},
pages={1616-1622},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S},
year={2018},
title={Computational fracture mechanics: An overview from early efforts to recent achievements},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={41},
number={12},
pages={2438-2474},
document_type={Review},
} 

@ARTICLE{
author={Golubovic Tamara A,Sedmak Aleksandar S,Spasojevic-Brkic Vesna K,Kirin Snezana D,Veg Emil A},
year={2018},
title={Welded joints as critical regions in pressure vessels - case study of vinyl-chloride monomer storage tank},
journal={HEMIJSKA INDUSTRIJA},
volume={72},
number={4},
pages={177-182},
document_type={Article},
} 

@ARTICLE{
author={Raweni Abuajila,Majstorovic Vidosav D,Sedmak Aleksandar S,Tadic Srdjan S,Kirin Snezana D},
year={2018},
title={Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={3},
pages={861-866},
document_type={Article},
} 

@ARTICLE{
author={Golubovic Tamara A,Sedmak Aleksandar S,Spasojevic-Brkic Vesna K,Kirin Snezana D,Rakonjac Ivan},
year={2018},
title={Novel Risk Based Assessment of Pressure Vessels Integrity},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={3},
pages={803-807},
document_type={Article},
} 

@ARTICLE{
author={Sghayer Abulgasem,Grbovic Aleksandar M,Sedmak Aleksandar S,Dinulovic Mirko R,Grozdanovic Ines B,Sedmak Simon A,Petrovski Blagoj},
year={2018},
title={Experimental and Numerical Analysis of Fatigue Crack Growth in Integral Skin-Stringer Panels},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={3},
pages={785-791},
document_type={Article},
} 

@ARTICLE{
author={Radu Dorin,Sedmak Aleksandar S,Bancila Radu},
year={2018},
title={Determining the crack acceptability in the welded joints of a wind loaded cylindrical steel shell structure},
journal={ENGINEERING FAILURE ANALYSIS},
volume={91},
number={},
pages={341-353},
document_type={Article},
} 

@ARTICLE{
author={Stankovic Milan,Micovic Aleksandar M,Sedmak Aleksandar S,Popovic Vladimir M},
year={2018},
title={Analysis of Comfort Parameters in Special Purpose Vehicles from Technological Development Point of View},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={2},
pages={502-509},
document_type={Article},
} 

@ARTICLE{
author={Radu Dorin,Sedmak Aleksandar S,Sedmak Simon A,Dunjic Momcilo M},
year={2018},
title={Stress Analysis of Steel Structure Comprising Cylindrical Shell with Billboard Tower},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={2},
pages={429-436},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Simon A,Golubovic Zorana Z,Murariu Alin Constantin,Sedmak Aleksandar S},
year={2018},
title={Numerical Simulation of Tensile Testing of Pe 80 Polymer Specimens},
journal={THERMAL SCIENCE},
volume={22},
number={1},
pages={641-649},
document_type={Article},
} 

@ARTICLE{
author={Tatic Uros,Colic Katarina G,Sedmak Aleksandar S,Miskovic Zarko Z,Petrovic Ana S},
year={2018},
title={Evaluation of the Locking Compression Plates Stress-Strain Fields},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={1},
pages={112-117},
document_type={Article},
} 

@ARTICLE{
author={Radu Dorin,Sedmak Aleksandar S,Bancila Radu},
year={2017},
title={Structural integrity of a wind loaded cylindrical steel shell structure},
journal={2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY, ICSI 2017},
volume={5},
number={},
pages={1213-1220},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jovicic Radomir D,Sedmak Simon A,Samardzic Ivan,Sedmak Aleksandar S,Tatic Uros,Milosevic Milos S},
year={2017},
title={Possibilities of Predicting the Behaviour of Ferrite-Austenite Welded Joints in Pressure Equipment During Exploitation},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={5},
pages={1361-1368},
document_type={Article},
} 

@ARTICLE{
author={Perzel Vincent,Flimel Marian,Krolczyk Jolanta,Sedmak Aleksandar S,Ruggiero Alessandro,Kozak Drazan V,Stoic Antun,Krolczyk Grzegorz,Hloch Sergej},
year={2017},
title={Measurement of Thermal Emission During Cutting of Materials Using Abrasive Water Jet},
journal={THERMAL SCIENCE},
volume={21},
number={5},
pages={2197-2203},
document_type={Article},
} 

@ARTICLE{
author={Zlatanovic Dragan M,Pezo Lato L,Sedmak Aleksandar S,Kirin Snezana D},
year={2017},
title={Importance of On-Time Decision Making in Energy Sector Based on Perspectives Case Study New Stavalj Project},
journal={THERMAL SCIENCE},
volume={21},
number={5},
pages={1925-1935},
document_type={Article},
} 

@ARTICLE{
author={Kredegh Abubakr,Sedmak Aleksandar S,Grbovic Aleksandar M,Sedmak Simon A},
year={2017},
title={Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={105},
number={},
pages={276-282},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Younise Bashir,Rakin Marko P,Gubeljak Nenad,Medjo Bojan I,Sedmak Aleksandar S},
year={2017},
title={Effect of material heterogeneity and constraint conditions on ductile fracture resistance of welded joint zones - Micromechanical assessment},
journal={ENGINEERING FAILURE ANALYSIS},
volume={82},
number={},
pages={435-445},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S,Milosevic Milos S,Cvetkovic Ivana,Pohar Andrej,Likozar Blaz},
year={2017},
title={Influence of Geometry on Pressure and Velocity Distribution in Packed-bed Methanol Steam Reforming Reactor},
journal={PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2016 (ICNAAM-2016)},
volume={1863},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Swei Mohamed,Petrovski Blagoj},
year={2017},
title={Creep crack growth properties of P91 and P22 welded joints},
journal={FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES},
volume={40},
number={8},
pages={1267-1275},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Shneba Giuma Ali,Veg Aleksandar,Kozak Drazan V,Sedmak Aleksandar S},
year={2017},
title={Mechatronic Approach to Inventing a Novel Kind of Deformeter},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={3},
pages={737-743},
document_type={Article},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Legweel Khaled MB,Milosevic Milos S,Mitrovic Nenad R,Miskovic Zarko Z,Hloch Sergej},
year={2017},
title={Experimental and Numerical Research of Mechanical Behaviour of Titanium Alloy Hip Implant},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={3},
pages={709-713},
document_type={Article},
} 

@ARTICLE{
author={Tanaskovic Drakce R,Tatic Uros,Djordjevic Branislav R,Sedmak Simon A,Sedmak Aleksandar S},
year={2017},
title={The Effect of Cracks on Stress State in Crane Wheel Hard-Surface Under Contact Loading},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={},
pages={169-175},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Tanaskovic Drakce R,Murariu Alin Constantin},
year={2017},
title={Experimental and Analytical Evaluation of Preheating Temperature During Multipass Repair Welding},
journal={THERMAL SCIENCE},
volume={21},
number={2},
pages={1003-1009},
document_type={Article},
} 

@ARTICLE{
author={Musraty Walid,Medjo Bojan I,Gubeljak Nenad,Likeb A,Cvijovic-Alagic Ivana Lj,Sedmak Aleksandar S,Rakin Marko P},
year={2017},
title={Ductile fracture of pipe-ring notched bend specimens - Micromechanical analysis},
journal={ENGINEERING FRACTURE MECHANICS},
volume={175},
number={},
pages={247-261},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Sedmak Simon A},
year={2017},
title={Scientific Biography and Bibliography of Professor Stojan Sedmak},
journal={FRACTURE AT ALL SCALES},
volume={},
number={},
pages={19-39},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Algool Mahdi,Kirin Snezana D,Rakicevic Branislav B,Bakic Ramo},
year={2016},
title={Industrial safety of pressure vessels - Structural integrity point of view},
journal={HEMIJSKA INDUSTRIJA},
volume={70},
number={6},
pages={685-694},
document_type={Review},
} 

@ARTICLE{
author={Arsic Dusan M,Djordjevic Milan,Zivkovic Jelena,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Lazic Vukic N,Rakic Dragan M},
year={2016},
title={Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures},
journal={STRENGTH OF MATERIALS},
volume={48},
number={5},
pages={687-695},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Kirin Snezana D,Golubovic Tamara A,Mitrovic Slobodan,Stanojevic Petar},
year={2016},
title={Risk Based Approach to Integrity Assessment of a Large Spherical Pressure Vessel},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={3654-3659},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Simon A,Algool Mandi,Sedmak Aleksandar S,Tatic Uros,Dzindo Emina S},
year={2016},
title={Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={3546-3553},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kredegh Abubakr,Sedmak Aleksandar S,Grbovic Aleksandar M,Milosevic Nenad Z,Danicic Darko},
year={2016},
title={Numerical simulation of fatigue crack growth in friction stir welded T joint made of Al 2024 T351 alloy},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={3065-3072},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Nenad R,Tanasic Ivan V,Sarac Dusan C,Milosevic Milos S,Miskovic Zarko Z,Tihacek-Sojic Ljiljana D,Sedmak Aleksandar S},
year={2016},
title={Analysis of the effect of implant distance from the surrounding structure, in the PMMA block model},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={1260-1265},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Younise Bashir,Rakin Marko P,Gubeljak Nenad,Medjo Bojan I,Sedmak Aleksandar S},
year={2016},
title={Numerical prediction of ductile fracture resistance of welded joint zones},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={753-760},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djukic Milos B,Bakic Gordana M,Sijacki-Zeravcic Vera M,Rajicic Bratislav M,Sedmak Aleksandar S,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2016},
title={Towards a unified and practical industrial model for prediction of hydrogen embrittlement and damage in steels},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={604-611},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Murariu Alin Constantin,Veljic Darko M,Barjaktarevic Dragana R,Rakin Marko P,Radovic Nenad A,Sedmak Aleksandar S,Djokovic Jelena M},
year={2016},
title={Influence of Material Velocity on Heat Generation During Linear Welding Stage of Friction Stir Welding},
journal={THERMAL SCIENCE},
volume={20},
number={5},
pages={1693-1701},
document_type={Article},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Grbovic Aleksandar M,Tatic Uros,Sedmak Simon A,Djordjevic Branislav R},
year={2016},
title={Finite element modeling of hip implant static loading},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={257-262},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Grbovic Aleksandar M,Burzic Meri,Hloch Sergej,Sedmak Simon A},
year={2016},
title={Numerical Simulation of Fatigue Crack Growth in Hip Implants},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={229-235},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kirin Snezana D,Mitrovic Milan,Borovic Sinisa,Sedmak Aleksandar S},
year={2016},
title={Impact of the Life Cycle of Company to Job Satisfaction},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={23},
number={3},
pages={819-825},
document_type={Article},
} 

@ARTICLE{
author={Djukic Milos B,Bakic Gordana M,Sijacki-Zeravcic Vera M,Sedmak Aleksandar S,Rajicic Bratislav M},
year={2016},
title={Hydrogen Embrittlement of Industrial Components: Prediction, Prevention, and Models},
journal={CORROSION},
volume={72},
number={7},
pages={943-961},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Kumar Ratnesh,Chattopadhyaya Somnath,Hloch Sergej,Tadic Srdjan S,Djurdjevic Andrijana A,Cekovic Ivana R,Doncheva Elisaveta},
year={2016},
title={Heat Input Effect of Friction Stir Welding on Aluminum Alloy AA 6061-T6 Welded Joint},
journal={THERMAL SCIENCE},
volume={20},
number={2},
pages={637-641},
document_type={Article},
} 

@ARTICLE{
author={Hloch Sergej,Foldyna Josef,Pude Frank,Kloc Jan,Zelenak Michal,Hvizdos Pavol,Monka Peter,Smolko Igor,Scucka Jiri,Kozak Drazan V,Sedmak Aleksandar S,Mihalcinova Emilia},
year={2015},
title={Experimental In-Vitro Bone Cements Disintegration with Ultrasonic Pulsating Water Jet for Revision Arthroplasty},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={6},
pages={1609-1615},
document_type={Article},
} 

@ARTICLE{
author={Djukic Milos B,Sijacki-Zeravcic Vera M,Bakic Gordana M,Sedmak Aleksandar S,Rajicic Bratislav M},
year={2015},
title={Hydrogen damage of steels: A case study and hydrogen embrittlement model},
journal={ENGINEERING FAILURE ANALYSIS},
volume={58},
number={},
pages={485-498},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Andrijana A,Zivojinovic Danijela,Grbovic Aleksandar M,Sedmak Aleksandar S,Rakin Marko P,Dascau Horia,Kirin Snezana D},
year={2015},
title={Numerical simulation of fatigue crack propagation in friction stir welded joint made of Al 2024-T351 alloy},
journal={ENGINEERING FAILURE ANALYSIS},
volume={58},
number={},
pages={477-484},
document_type={Article},
} 

@ARTICLE{
author={Medjo Bojan I,Rakin Marko P,Gubeljak Nenad,Matvienko Y,Arsic Miodrag A,Sarkocevic Zivce S,Sedmak Aleksandar S},
year={2015},
title={Failure resistance of drilling rig casing pipes with an axial crack},
journal={ENGINEERING FAILURE ANALYSIS},
volume={58},
number={},
pages={429-440},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Nikolic Ruzica R,Mutavdzic Milan,Aleksandrovic Srbislav M,Krstic Bozidar V,Milosavljevic Dragan I},
year={2015},
title={Selection of the Most Appropriate Welding Technology for Hardfacing of Bucket Teeth},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={1},
pages={165-172},
document_type={Article},
} 

@ARTICLE{
author={Bakic R,Abukresh MO,Sedmak Aleksandar S,Samardzic Ivan,Jovicic Radomir D},
year={2015},
title={Effect of Microstructure on Tensile Properties of Austenite-Ferrite Welded Joint},
journal={METALURGIJA},
volume={54},
number={2},
pages={335-338},
document_type={Article},
} 

@ARTICLE{
author={Zivojinovic Danijela,Djurdjevic Andrijana A,Grbovic Aleksandar M,Sedmak Aleksandar S,Rakin Marko P},
year={2014},
title={Numerical modelling of crack propagation in friction stir welded joint made of aluminium alloy},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={1330-1335},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djukic Milos B,Sijacki-Zeravcic Vera M,Bakic Gordana M,Sedmak Aleksandar S,Rajicic Bratislav M},
year={2014},
title={Hydrogen embrittlement of low carbon structural steel},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={1167-1172},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Simon A,Tatic Uros,Jovicic Radomir D,Sedmak Aleksandar S,Milosevic Milos S,Bakic Ramo,Sedmak Stojan A},
year={2014},
title={Numerical modeling of austenite-ferrite weldment tensile test},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={1123-1128},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dimic Ivana D,Medjo Bojan I,Rakin Marko P,Arsic Miodrag A,Sarkocevic Zivce S,Sedmak Aleksandar S},
year={2014},
title={Failure prediction of gas and oil drilling rig pipelines with axial defects},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={955-960},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Micovic Aleksandar M,Popovic Vladimir M,Sedmak Aleksandar S},
year={2014},
title={Potential for Improvement of Comfort Parameters in Off-Road Vehicles of Serbian Armed Forces},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={5},
pages={1009-1016},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Medjo Bojan I,Arsic Miodrag A,Sarkocevic Zivce S,Sedmak Aleksandar S},
year={2014},
title={Effect of Exploitation Conditions and Flaw Geometry on the Load Carrying Capacity of Casing Pipes for Oil Drilling Rigs},
journal={PROCEEDINGS OF THE 14TH SYMPOSIUM ON EXPERIMENTAL STRESS ANALYSIS AND MATERIALS TESTING},
volume={601},
number={},
pages={65-70},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Eramah Abdsalam M,Tadic Srdjan S,Perkovic Srdja,Dascau Horia},
year={2014},
title={Impact Toughness of Friction Stir Welded Al-Mg Alloy},
journal={MATERIALS TESTING},
volume={56},
number={10},
pages={837-841},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Milovic Ljubica P,Pavisic Mirko N,Konjatic Pejo I},
year={2014},
title={Finite Element Modelling of Creep Process - Steady State Stresses and Strains},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S179-S188},
document_type={Article},
} 

@ARTICLE{
author={Aburuga Tarek,Sedmak Aleksandar S,Radakovic Zoran J},
year={2014},
title={Numerical Aspects for Efficient Welding Computational Mechanics},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S139-S148},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Ivanovic Ivana B,Sedmak Aleksandar S,Rudolf Rebeka,Lazic Mirjana M,Radakovic Zoran J},
year={2014},
title={Numerical Analysis of Temperature Field During Hardfacing Process and Comparison with Experimental Results},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S113-S120},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Sedmak Aleksandar S,Rakin Marko P,Bajic Nikola S,Medjo Bojan I,Bajic Darko R,Grabulov Vencislav K},
year={2014},
title={Experimental and Numerical Thermo - Mechanical Analysis of Friction Stir Welding of High - Strength Alluminium Alloy},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S29-S38},
document_type={Article},
} 

@ARTICLE{
author={Tadic Srdjan S,Sedmak Aleksandar S,Prokic-Cvetkovic Radica,Eramah Abdsalam M,Rudolf Rebeka},
year={2014},
title={Superplastic Deformation of An X7093 Al Alloy},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={3},
pages={321-325},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nenad R,Milosevic Milos S,Momcilovic Nikola V,Petrovic Aleksandar N,Miskovic Zarko Z,Sedmak Aleksandar S,Popovic Predrag S},
year={2014},
title={Local Strain and Stress Analysis of Globe Valve Housing Subjected to External Axial Loading},
journal={LOCAL MECHANICAL PROPERTIES IX},
volume={586},
number={},
pages={214-217},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tawengi AS,Sedmak Aleksandar S,Grabulov Vencislav K},
year={2014},
title={Cold Weld Cracking Susceptibility of High Strength Low Alloyed (HSLA) Steel Nionikral 70},
journal={METALURGIJA},
volume={53},
number={4},
pages={624-626},
document_type={Article},
} 

@ARTICLE{
author={Bulatovic Srdjan M,Burzic Zijah H,Aleksic Vujadin D,Sedmak Aleksandar S,Milovic Ljubica P},
year={2014},
title={Impact of Choice of Stabilized Hysteresis Loop on the End Result of Investigation of High-Strength Low-Alloy (HSLA) Steel on Low Cycle Fatigue},
journal={METALURGIJA},
volume={53},
number={4},
pages={477-480},
document_type={Article},
} 

@ARTICLE{
author={Bulatovic S,Milovic Ljubica P,Sedmak Aleksandar S,Samardzic Ivan},
year={2014},
title={Identification of Low Cycle Fatigue Parameters of High Strength Low-Alloy (Hsla) Steel at Room Temperature},
journal={METALURGIJA},
volume={53},
number={4},
pages={466-468},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S,Lazic Vukic N},
year={2013},
title={Numerical Analysis of Thermal Conditions for Planning and Further Improvements of Hard Surfacing Experiment},
journal={11TH INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2013, PTS 1 AND 2 (ICNAAM 2013)},
volume={1558},
number={},
pages={2414-2418},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic-Vulicevic Ljubica,Arsic Miodrag A,Sarkocevic Zivce S,Sedmak Aleksandar S,Rakin Marko P},
year={2013},
title={Structural Life Assessment of Oil Rig Pipes Made of Api J55 Steel by High Frequency Welding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={6},
pages={1091-1094},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Medjo Bojan I,Gubeljak Nenad,Sedmak Aleksandar S},
year={2013},
title={Micromechanical assessment of mismatch effects on fracture of high-strength low alloyed steel welded joints},
journal={ENGINEERING FRACTURE MECHANICS},
volume={109},
number={},
pages={221-235},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S,Rudolf Rebeka,Gusel L,Grujic Biljana},
year={2013},
title={Distortion of the Substructure of a 20-Ft Shipping Container Exposed to Zinc Hot-Dip Galvanizing},
journal={MATERIALI IN TEHNOLOGIJE},
volume={47},
number={2},
pages={161-167},
document_type={Article},
} 

@ARTICLE{
author={Camagic Ivica R,Vasic Nemanja,Vasic Zlatibor S,Burzic Zijah H,Sedmak Aleksandar S},
year={2013},
title={Compatibility of Fracture Mechanics Parameters and Fatigue Crack Growth Parameters in Welded Joint Behaviour Evaluation},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={2},
pages={205-211},
document_type={Article},
} 

@ARTICLE{
author={Karastojkovic Zoran M,Peric Radisa S,Janjusevic Zoran,Kovacevic Zorica M,Sedmak Aleksandar S,Rakovic Aleksandar},
year={2013},
title={High Reflectance as Desired Property of Shining Surface and Undesired for Laser Welding in Jewel Production of 585 Gold Alloy},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={3},
pages={39-42},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nenad R,Milosevic Milos S,Momcilovic Nikola V,Petrovic Aleksandar N,Sedmak Aleksandar S,Maneski Tasko Dj,Zrilic Milorad M},
year={2012},
title={Experimental and Numerical Analysis of Local Mechanical Properties of Globe Valve Housing},
journal={CHEMICKE LISTY},
volume={106},
number={},
pages={S491-S494},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Milos S,Mitrovic Nenad R,Jovicic Radomir D,Sedmak Aleksandar S,Maneski Tasko Dj,Petrovic Aleksandar N,Aburuga Tarek},
year={2012},
title={Measurement of Local Tensile Properties of Welded Joint Using Digital Image Correlation Method},
journal={CHEMICKE LISTY},
volume={106},
number={},
pages={S485-S488},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Sedmak Aleksandar S,Grubic-Nesic Leposava,Cosic Ilija P},
year={2012},
title={Project Risk Management in Complex Petrochemical System},
journal={HEMIJSKA INDUSTRIJA},
volume={66},
number={1},
pages={135-148},
document_type={Article},
} 

@ARTICLE{
author={Tomic Radoljub P,Sedmak Aleksandar S,Pecic Ljiljana},
year={2012},
title={Process of generating of quality solution of the oil gear pump which is leading to effectively high performance product},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={3},
pages={1267-1273},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Milosavljevic Dragan I,Nikolic Ilija Z,Aleksandrovic Srbislav M,Nikolic Ruzica R,Mutavdzic Milan},
year={2012},
title={Theoretical and Experimental Estimation of the Working Life of Machine Parts Hard Faced with Austenite-Manganese Electrodes},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={5},
pages={547-554},
document_type={Article},
} 

@ARTICLE{
author={Camagic Ivica R,Vasic Nemanja,Burzic Zijah H,Sedmak Aleksandar S},
year={2012},
title={Analysis of the Influence of Microstructure Heterogeneity and Mechanical Properties of Welded Joint Constituents on Fracture Toughness for Plane Strain, K-Ic},
journal={ADVANCES IN FRACTURE AND DAMAGE MECHANICS X},
volume={488-489},
number={},
pages={617-620},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rakin Marko P,Medjo Bojan I,Arsic Miodrag A,Sarkocevic Zivce S,Ivanovic Ivana B,Sedmak Aleksandar S},
year={2012},
title={API J55 Steel Casing Pipe with an Initial Surface Crack under Internal Pressure - Determination of Fracture Parameters},
journal={ADVANCES IN FRACTURE AND DAMAGE MECHANICS X},
volume={488-489},
number={},
pages={577-580},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Veljic Darko M,Perovic Milenko M,Sedmak Aleksandar S,Rakin Marko P,Trifunovic Miroslav V,Bajic Nikola S,Bajic Darko R},
year={2012},
title={A Coupled Thermo-Mechanical Model of Friction Stir Welding},
journal={THERMAL SCIENCE},
volume={16},
number={2},
pages={527-534},
document_type={Article},
} 

@ARTICLE{
author={Perovic Milenko,Veljic Darko M,Rakin Marko P,Radovic Nenad A,Sedmak Aleksandar S,Bajic Nikola S},
year={2012},
title={Friction-Stir Welding of High-Strength Aluminium Alloys and a Numerical Simulation of the Plunge Stage},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={3},
pages={215-221},
document_type={Article},
} 

@ARTICLE{
author={Petronic Sanja Z,Kovacevic Aleksander G,Milosavljevic Andjelka,Sedmak Aleksandar S},
year={2012},
title={Microstructural changes of Nimonic-263 superalloy caused by laser beam action},
journal={PHYSICA SCRIPTA},
volume={T149},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ninkovic Dejan P,Sedmak Aleksandar S,Kirin Snezana D,Rakonjac Ivan M,Misita Mirjana Z},
year={2012},
title={Information-communication and documentation flow within R&D function model},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={1},
pages={137-146},
document_type={Article},
} 

@ARTICLE{
author={Tanasic Ivan V,Tihacek-Sojic Ljiljana D,Milic-Lemic Aleksandra M,Djuric Marija P,Mitrovic Nenad R,Milosevic Milos S,Sedmak Aleksandar S},
year={2012},
title={Optical Aspect of Deformation Analysis in the Bone-Denture Complex},
journal={COLLEGIUM ANTROPOLOGICUM},
volume={36},
number={1},
pages={173-178},
document_type={Article},
} 

@ARTICLE{
author={Younise Bashir,Sedmak Aleksandar S,Rakin Marko P,Gubeljak Nenad,Medjo Bojan I,Burzic Meri,Zrilic Milorad M},
year={2012},
title={Micromechanical analysis of mechanical heterogeneity effect on the ductile tearing of weldments},
journal={MATERIALS & DESIGN},
volume={37},
number={},
pages={193-201},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S},
year={2011},
title={The Influence of Power and Velocity of the Heat Source on Temperature Distribution in Plate Welding Problems},
journal={NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2011: INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS, VOLS A-C},
volume={1389},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rakonjac Ivan M,Rakonjac Ivana M,Kirin Snezana D,Spasojevic-Brkic Vesna K,Sedmak Aleksandar S},
year={2011},
title={Risk Analysis by Key-coefficient Assessment - Public Lighting Project Example},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={6},
number={4},
pages={1016-1023},
document_type={Article},
} 

@ARTICLE{
author={Tanaskovic Tatjana,Rudolf Rebeka,Flasker Joze,Kirin Snezana D,Sedmak Aleksandar S},
year={2011},
title={Inovations, RD Activities, Education of Engineers and Catching-Up Process in Serbia},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={6},
number={4},
pages={908-915},
document_type={Article},
} 

@ARTICLE{
author={Popovic Olivera D,Prokic-Cvetkovic Radica,Sedmak Aleksandar S,Buyukyildrim Galip,Bukvic Aleksandar},
year={2011},
title={The Influence of Buffer Layer on the Properties of Surface Welded Joint of High-Carbon Steel},
journal={MATERIALI IN TEHNOLOGIJE},
volume={45},
number={6},
pages={579-584},
document_type={Article},
} 

@ARTICLE{
author={Zivojinovic Danijela,Arsic Miodrag A,Sedmak Aleksandar S,Kirin Snezana D,Tomic Radoljub P},
year={2011},
title={Practical Aspects of Fail-Safe Design - Calculation of Fatigue Life of Cracked Thin-Walled Structures},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={18},
number={4},
pages={609-617},
document_type={Article},
} 

@ARTICLE{
author={Jovicic Radomir D,Sedmak Aleksandar S,Colic Katarina G,Milosevic Milos S,Mitrovic Nenad R},
year={2011},
title={Evaluation of the Local Tensile Properties of Austenite-Ferrite Welded Joint},
journal={CHEMICKE LISTY},
volume={105},
number={},
pages={S754-S757},
document_type={Article},
} 

@ARTICLE{
author={Younise Bashir,Rakin Marko P,Medjo Bojan I,Gubeljak Nenad,Kozak Drazan V,Sedmak Aleksandar S},
year={2011},
title={Numerical Analysis of Constraint Effect on Ductile Tearing in Strength Mismatched Welded Cct Specimens Using Micromechanical Approach},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={18},
number={3},
pages={333-340},
document_type={Article},
} 

@ARTICLE{
author={Tomic Radoljub P,Sedmak Aleksandar S,Catic Dobrivoje M,Milos Marko V,Stefanovic Zoran},
year={2011},
title={Thermal Stress Analysis of a Fiber-epoxy Composite Material},
journal={THERMAL SCIENCE},
volume={15},
number={2},
pages={559-563},
document_type={Article},
} 

@ARTICLE{
author={Medjo Bojan I,Rakin Marko P,Gubeljak Nenad,Predan J,Arsic Miodrag A,Sedmak Aleksandar S},
year={2011},
title={Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals},
journal={MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE},
volume={465},
number={},
pages={578-581},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tadic Srdjan S,Jancic-Heinemann Radmila M,Colic Katarina G,Sedmak Aleksandar S},
year={2011},
title={High-temperature deformation behaviour of Ti3Al-11Nb intermetallic},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={102},
number={4},
pages={452-456},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S,Milos Marko V,Zivkovic Aleksandar B,Lazic Mirjana M},
year={2011},
title={Numerical Study of Transient Three-dimensional Heat Conduction Problem with a Moving Heat Source},
journal={THERMAL SCIENCE},
volume={15},
number={1},
pages={257-266},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Bosnjak Srdjan M,Zrnic Nenad Dj,Sedmak Aleksandar S,Gnjatovic Nebojsa B},
year={2011},
title={Bucket wheel failure caused by residual stresses in welded joints},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={2},
pages={700-712},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Gubeljak Nenad,Medjo Bojan I,Maneski Tasko Dj,Sedmak Aleksandar S},
year={2010},
title={Application of a Structural Integrity Assessment Software},
journal={IMETI 2010: 3RD INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGICAL INNOVATION, VOL I},
volume={},
number={},
pages={246-249},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dobrojevic Milos,Medjo Bojan I,Rakin Marko P,Sedmak Aleksandar S},
year={2010},
title={Project Management Software for Distributed Industrial Companies},
journal={INNOVATIONS IN COMPUTING SCIENCES AND SOFTWARE ENGINEERING},
volume={},
number={},
pages={221-226},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S},
year={2010},
title={Sensitivity Equation for Transient Three-Dimensional Heat Conduction Problem with Moving Heat Source},
journal={NUMERICAL ANALYSIS AND APPLIED MATHEMATICS, VOLS I-III},
volume={1281},
number={},
pages={2127-2130},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tadic Srdjan S,Prokic-Cvetkovic Radica,Balac Igor M,Jancic-Heinemann Radmila M,Bojic Katarina,Sedmak Aleksandar S},
year={2010},
title={Deformation Mechanisms in Ti3al-nb Alloy at Elevated Temperatures},
journal={MATERIALI IN TEHNOLOGIJE},
volume={44},
number={6},
pages={357-361},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Jovanovic Milorad D,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Milosavljevic Dragan I,Krstic Bozidar V,Cukic Rajko D},
year={2010},
title={Energetic Analysis of Hard Facing and Weld Cladding of An Air Powered Drop Hammer Damaged Ram},
journal={THERMAL SCIENCE},
volume={14},
number={},
pages={S269-S284},
document_type={Article},
} 

@ARTICLE{
author={Manjgo Mersida,Medjo Bojan I,Milovic Ljubica P,Rakin Marko P,Burzic Zijah H,Sedmak Aleksandar S},
year={2010},
title={Analysis of welded tensile plates with a surface notch in the weld metal and heat affected zone},
journal={ENGINEERING FRACTURE MECHANICS},
volume={77},
number={15},
pages={2958-2970},
document_type={Article},
} 

@ARTICLE{
author={Jovicic Gordana R,Zivkovic Miroslav M,Jovicic Nebojsa M,Milovanovic Dobrica M,Sedmak Aleksandar S},
year={2010},
title={Improvement of algorithm for numerical crack modelling},
journal={ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING},
volume={10},
number={3},
pages={19-35},
document_type={Article},
} 

@ARTICLE{
author={Popovic Olivera D,Prokic-Cvetkovic Radica,Sedmak Aleksandar S,Grabulov Vencislav K,Burzic Zijah H,Rakin Marko P},
year={2010},
title={Characterisation of High-Carbon Steel Surface Welded Layer},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={56},
number={5},
pages={295-300},
document_type={Article},
} 

@ARTICLE{
author={Kalaba Dragan V,Sedmak Aleksandar S,Radakovic Zoran J,Milos Marko V},
year={2010},
title={Thermomechanical Modelling the Resistance Welding of Pbsb Alloy},
journal={THERMAL SCIENCE},
volume={14},
number={2},
pages={437-450},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Zivkovic Miroslav M,Aleksandrovic Srbislav M,Cukic Rajko D,Jovicic Radomir D,Ivanovic Ivana B},
year={2010},
title={Theoretical-experimental Determining Of Cooling Time (t(8/5)) In Hard Facing Of Steels For Forging Dies},
journal={THERMAL SCIENCE},
volume={14},
number={1},
pages={235-246},
document_type={Article},
} 

@ARTICLE{
author={Medjo Bojan I,Rakin Marko P,Zrilic Milorad M,Putic Slavisa S,Sedmak Aleksandar S},
year={2009},
title={Micromechanical Estimates of the Critical Values of J-Integral for the Steel of Steam Pipelines},
journal={MATERIALS SCIENCE},
volume={45},
number={4},
pages={523-531},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Milosavljevic Dragan I,Cukic Rajko D,Grabulov Vencislav K},
year={2009},
title={Reparation Of The Damaged Forging Hammer Mallet By Hard Facing And Weld Cladding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={4},
pages={107-113},
document_type={Article},
} 

@ARTICLE{
author={Lozanovic Jasmina V,Gubeljak Nenad,Sedmak Aleksandar S},
year={2009},
title={Measurement Of Strain Using Stereometry},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={4},
pages={93-99},
document_type={Review},
} 

@ARTICLE{
author={Sarkocevic Zivce S,Arsic Miodrag A,Medjo Bojan I,Kozak Drazan V,Rakin Marko P,Burzic Zijah H,Sedmak Aleksandar S},
year={2009},
title={Damage Level Estimate of API J55 Steel for Welded Seam Casing Pipes},
journal={STROJARSTVO},
volume={51},
number={4},
pages={303-311},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Milovic Ljubica P,Lozanovic Jasmina V},
year={2009},
title={Development And Application Of Crack Parameters},
journal={SECURITY AND RELIABILITY OF DAMAGED STRUCTURES AND DEFECTIVE MATERIALS},
volume={},
number={},
pages={209-230},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petronic Sanja Z,Drecun-Nesic S,Milosavljevic Andjelka,Sedmak Aleksandar S,Popovic Miroslav P,Kovacevic Aleksander G},
year={2009},
title={Microstructure Changes of Nickel-Base Superalloys Induced by Interaction with Femtosecond Laser Beam},
journal={ACTA PHYSICA POLONICA A},
volume={116},
number={4},
pages={550-552},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ratkovic Nada R,Sedmak Aleksandar S,Jovanovic Milorad D,Lazic Vukic N,Nikolic Ruzica R,Krstic Bozidar V},
year={2009},
title={Physical And Metallurgic Changes During The Friction Welding Of High-speed Cutting Steel And Tempered Steel},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={3},
pages={27-31},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Sedmak Aleksandar S,Jovanovic Milorad D,Lazic Vukic N,Nikolic Ruzica R,Krstic Bozidar V},
year={2009},
title={Quality Analysis Of Ai-cu Joint Realized By Friction Welding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={3},
pages={3-7},
document_type={Article},
} 

@ARTICLE{
author={Zrilic Milorad M,Rakin Marko P,Medjo Bojan I,Cvijovic Zorica M,Sedmak Aleksandar S},
year={2009},
title={Evaluation Of Damage Of Steam Pipeline Steel Using Local Approach To Fracture},
journal={PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 7 - OPERATIONS, APPLICATIONS AND COMPONENTS},
volume={},
number={},
pages={7-12},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Stojan A,Sedmak Aleksandar S},
year={2009},
title={Fracture mechanics and non-destructive testing for structural integrity assessment},
journal={ADVANCES IN STRENGTH OF MATERIALS},
volume={399},
number={},
pages={27-36},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Medjo Bojan I,Rakin Marko P,Gubeljak Nenad,Sedmak Aleksandar S},
year={2009},
title={Application of Complete Gurson Model for prediction of ductile fracture in welded steel joints},
journal={ADVANCES IN STRENGTH OF MATERIALS},
volume={399},
number={},
pages={13-20},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovic Ljubica P,Vuherer Tomaz,Zrilic Milorad M,Sedmak Aleksandar S,Putic Slavisa S},
year={2008},
title={Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel},
journal={MATERIALS AND MANUFACTURING PROCESSES},
volume={23},
number={6},
pages={597-602},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Gubeljak Nenad,Dobrojevic Milos,Sedmak Aleksandar S},
year={2008},
title={Modelling of ductile fracture initiation in strength mismatched welded joint},
journal={ENGINEERING FRACTURE MECHANICS},
volume={75},
number={11},
pages={3499-3510},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Stojan A,Sedmak Aleksandar S},
year={2008},
title={Welded penstock, produced of high-strength steel and application of fracture mechanics parameters to structural integrity assessment},
journal={SAFETY, RELIABILITY AND RISKS ASSOCIATED WITH WATER, OIL AND GAS PIPELINES},
volume={},
number={},
pages={271-286},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Stojan A,Sedmak Aleksandar S,Arsic Miodrag A,Vojvodic-Tuma Jelena},
year={2007},
title={An experimental verification of numerical models for the fracture and fatigue of welded structures},
journal={MATERIALI IN TEHNOLOGIJE},
volume={41},
number={4},
pages={173-178},
document_type={Article},
} 

@ARTICLE{
author={Burzic Zijah H,Grabulov Vencislav K,Sedmak Stojan A,Sedmak Aleksandar S},
year={2007},
title={Fatigue properties of a high-strength-steel welded joint},
journal={MATERIALI IN TEHNOLOGIJE},
volume={41},
number={4},
pages={163-166},
document_type={Article},
} 

@ARTICLE{
author={Dobrojevic Milos,Rakin Marko P,Gubeljak Nenad,Cvijovic Ivana Lj,Zrilic Milorad M,Krunich N,Sedmak Aleksandar S},
year={2007},
title={Micromechanical analysis of constraint effect on fracture initiation in strength mismatched welded},
journal={Research Trends in Contemporary Materials Science},
volume={555},
number={},
pages={571-576},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovic Ljubica P,Sedmak Aleksandar S,Sedmak Stojan A,Putic Slavisa S,Zrilic Milorad M},
year={2007},
title={Numerical and analytical modeling of elastic-plastic fracture mechanics parameters},
journal={Research Trends in Contemporary Materials Science},
volume={555},
number={},
pages={565-570},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zrilic Milorad M,Rakin Marko P,Sedmak Aleksandar S,Aleksic Radoslav R,Cvijovic Zorica M,Arsic Miodrag A},
year={2006},
title={Ductile fracture prediction of steam pipeline steel},
journal={RECENT DEVELOPMENTS IN ADVANCED MATERIALS AND PROCESSES},
volume={518},
number={},
pages={537-542},
document_type={Article},
} 

@ARTICLE{
author={Prokic-Cvetkovic Radica,Milosavljevic Andjelka,Sedmak Aleksandar S,Popovic Olivera D},
year={2006},
title={The influence of the oxygen equivalent in a gas-mixture on the structure and toughness of microalloyed steel weldments},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={71},
number={3},
pages={313-321},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Cvijovic Zorica M,Grabulov Vencislav K,Gubeljak Nenad,Sedmak Aleksandar S},
year={2004},
title={The influence of microstructure on ductile fracture initiation in low-alloyed steel},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={175-180},
document_type={Article},
} 

@ARTICLE{
author={Tuma JV,Sedmak Aleksandar S},
year={2004},
title={Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment},
journal={ENGINEERING FRACTURE MECHANICS},
volume={71},
number={9-10},
pages={1435-1451},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Cvijovic Zorica M,Grabulov Vencislav K,Putic Slavisa S,Sedmak Aleksandar S},
year={2004},
title={Prediction of ductile fracture initiation using micromechanical analysis},
journal={ENGINEERING FRACTURE MECHANICS},
volume={71},
number={4-6},
pages={813-827},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Cvijovic Zorica M,Sedmak Aleksandar S,Sedmak Stojan A},
year={2002},
title={Analysis of the transferability of micromechanical parameters of damage of steel under the conditions of ductile-fracture initiation},
journal={MATERIALS SCIENCE},
volume={38},
number={1},
pages={104-113},
document_type={Article},
}