@ARTICLE{
author={Radetic Tamara,Popovic Maja C,Novakovic Mirjana M,Rajic Vladimir B,Romhanji Endre L},
year={2023},
title={Identification of Fe-Bearing Phases in the As-Cast Microstructure of AA6026 Alloy and Their Evolution During Homogenization Treatment},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={59},
number={2},
pages={327-338},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic Miljana M,Alil Ana B,Markoli Bostjan,Naglic I,Romhanji Endre L},
year={2022},
title={Effect of homogenization temperature on microstructure and mechanical properties of Al-Mg-Si alloy containing low-melting point elements},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={902},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Jovanovic Milan T,Romhanji Endre L,Zec Slavica P},
year={2021},
title={Mechanism and kinetics of aging of high-strength Cu-5 wt.% Ni-2.5 wt.% Ti},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={96},
number={1},
pages={78-82},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic Miljana M,Romhanji Endre L},
year={2020},
title={Influence of Cold-Rolling Deformation and Annealing Temperature on the Grain Growth of Al-4%Mg-Mn Alloy},
journal={MATERIALI IN TEHNOLOGIJE},
volume={54},
number={1},
pages={85-90},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic Miljana M,Gligorijevic Bojan R,Alil Ana B,Romhanji Endre L},
year={2019},
title={The Influence of Mg and Mn Content on Abnormal Grain Growth in Aa5182 Type Alloys},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={25},
number={4},
pages={315-323},
document_type={Article},
} 

@ARTICLE{
author={Alil Ana B,Popovic Miljana M,Bajat Jelena B,Romhanji Endre L},
year={2018},
title={Mechanical and corrosion properties of AA5083 alloy sheets produced by accumulative roll bonding (ARB) and conventional cold rolling (CR)},
journal={MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION},
volume={69},
number={7},
pages={858-869},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Radetic Tamara,Popovic Miljana M},
year={2016},
title={Homogenization of An Al-Mg Alloy and Alligatoring Failure: Alloy Ductility and Fracture},
journal={MATERIALI IN TEHNOLOGIJE},
volume={50},
number={3},
pages={403-407},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic M,Jegdic Bore V,Romhanji Endre L},
year={2016},
title={Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy},
journal={MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION},
volume={67},
number={8},
pages={867-875},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Radetic Tamara,Popovic Miljana M},
year={2016},
title={Homogenization of An Al-Mg Alloy and Alligatoring Failure: Influence of the Microstructure},
journal={MATERIALI IN TEHNOLOGIJE},
volume={50},
number={4},
pages={531-536},
document_type={Article},
} 

@ARTICLE{
author={Alil Ana B,Popovic Miljana M,Radetic Tamara,Zrilic Milorad M,Romhanji Endre L},
year={2015},
title={Influence of annealing temperature on the baking response and corrosion properties of an Al-4.6 wt% Mg alloy with 0.54 wt% Cu},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={625},
number={},
pages={76-84},
document_type={Article},
} 

@ARTICLE{
author={Halap Akram,Popovic Miljana M,Radetic Tamara,Vascic Veselin,Romhanji Endre L},
year={2014},
title={Influence of the Thermo-Mechanical Treatment on the Exfoliation and Pitting Corrosion of An AA5083-Type Alloy},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={4},
pages={479-483},
document_type={Article},
} 

@ARTICLE{
author={Halap Akram,Radetic Tamara,Popovic Miljana M,Romhanji Endre L},
year={2014},
title={Influence of the Thermomechanical Treatment on the Intergranular Corrosion Susceptibility of Zn-Modified Al-5.1 Wt Pct Mg-0.7 Wt Pct Mn Alloy Sheet},
journal={METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE},
volume={45A},
number={10},
pages={4572-4579},
document_type={Article},
} 

@ARTICLE{
author={Popovic Miljana M,Radetic Tamara,Romhanji Endre L},
year={2012},
title={Precipitation of the beta-Phase and Corrosion Behavior of an Al-6.8 wt.% Mg Alloy},
journal={PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13)},
volume={},
number={},
pages={363-369},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Halap Akram,Radetic Tamara,Popovic Miljana M,Romhanji Endre L},
year={2012},
title={Study of Homogenization Treatments of Cast 5xxx Series Ai-Mg-Mn Alloy Modified with Zn},
journal={LIGHT METALS 2012},
volume={},
number={},
pages={387-392},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L,Kamberovic Zeljko J},
year={2012},
title={Chemical Composition and Morphology of M7C3 Eutectic Carbide in High Chromium White Cast Iron Alloyed with Vanadium},
journal={ISIJ INTERNATIONAL},
volume={52},
number={12},
pages={2200-2204},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic Miljana M,Romhanji Endre L},
year={2012},
title={Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment},
journal={MATERIALS CHARACTERIZATION},
volume={65},
number={},
pages={16-27},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Filipovic Mirjana M,Kamberovic Zeljko J},
year={2012},
title={Kinetics of Internal Oxidation in Ag-6Sn-2In-1Te-0.2Ni and Ag-6Sn-0.6Cu-1Bi-0.2Ni Type Alloys},
journal={METALS AND MATERIALS INTERNATIONAL},
volume={18},
number={1},
pages={171-176},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L},
year={2011},
title={Strain hardening of austenite in Fe-Cr-C-V alloys under repeated impact},
journal={WEAR},
volume={270},
number={11-12},
pages={800-805},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Popovic Miljana M,Stanojevic S},
year={2010},
title={Precipitation Processes in Al-Mg-(Mn,Cu) Type Alloy Sheets Evaluated Through Electrical Resistivity Variations},
journal={JOURNAL OF NONDESTRUCTIVE EVALUATION},
volume={29},
number={1},
pages={43-48},
document_type={Article},
} 

@ARTICLE{
author={Cekerevac Milan I,Romhanji Endre L,Cvijovic Zorica M,Nikolic-Bujanovic Ljiljana N},
year={2010},
title={The influence of tin and silver as microstructure modifiers on the corrosion rate of Pb-Ca alloys in sulfuric acid solutions},
journal={MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION},
volume={61},
number={1},
pages={51-57},
document_type={Article},
} 

@ARTICLE{
author={Radetic Tamara,Popovic Miljana M,Romhanji Endre L,Verlinden Bert},
year={2010},
title={The effect of ECAP and Cu addition on the aging response and grain substructure evolution in an Al-4.4 wt.% Mg alloy},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={527},
number={3},
pages={634-644},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L,Kamberovic Zeljko J,Korac Marija S},
year={2009},
title={Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys},
journal={MATERIALS TRANSACTIONS},
volume={50},
number={10},
pages={2488-2492},
document_type={Article},
} 

@ARTICLE{
author={Popovic Miljana M,Romhanji Endre L},
year={2008},
title={Characterization of microstructural changes in an Al-6.8 wt.% Mg alloy by electrical resistivity measurements},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={492},
number={1-2},
pages={460-467},
document_type={Article},
} 

@ARTICLE{
author={Minov Boris G,Popovic Miljana M,Glisic Dragomir M,Romhanji Endre L},
year={2008},
title={Influence of microstructure on the formability of Al-Mg6.8 alloy},
journal={HEMIJSKA INDUSTRIJA},
volume={62},
number={3},
pages={170-176},
document_type={Article},
} 

@ARTICLE{
author={Talijan Nadezda M,Cosovic Vladan R,Stajic-Trosic Jasna T,Grujic Aleksandar S,Zivkovic Dragana T,Romhanji Endre L},
year={2007},
title={Microstructure and Properties of Silver Based Cadmium Free Electrical Contact Materials},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={43},
number={2},
pages={171-176},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Popovic Miljana M,Glisic Dragomir M,Dodok R,Jovanovic D},
year={2006},
title={Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={177},
number={1-3},
pages={386-389},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Vracaric Dusan D,Romhanji Endre L},
year={2005},
title={Properties of dispersion-hardened copper made by internal oxidation of prealloyed copper powder containing 2.5wt. % Al},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={493-497},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Jovanovic Milan T,Romhanji Endre L,Zec Slavica P},
year={2005},
title={Mechanism and kinetics of aging of high-strength Cu-5 wt.% Ni-2.5 wt.% Ti},
journal={ZEITSCHRIFT FUR METALLKUNDE},
volume={96},
number={1},
pages={78-82},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Eric Olivera A,Bozic Dusan A,Mitkov Mirjana V,Romhanji Endre L},
year={2004},
title={Characterization of dispersion strengthened copper with 3wt%Al2O3 by mechanical alloying},
journal={SCIENCE OF SINTERING},
volume={36},
number={3},
pages={205-211},
document_type={Article},
} 

@ARTICLE{
author={Popovic Miljana M,Romhanji Endre L},
year={2002},
title={Stress corrosion cracking susceptibility of Al-Mg alloy sheet with high Mg content},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={125},
number={},
pages={275-280},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Dudukovska A,Glisic Dragomir M},
year={2002},
title={The effect of temperature on strain-rate sensitivity in high strength Al-Mg alloy sheet},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={125},
number={},
pages={193-198},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Romhanji Endre L,Mitkov Mirjana V},
year={2002},
title={Characterization of high-energy ball milled prealloyed copper powder containing 2.5 wt%Al},
journal={JOURNAL OF MATERIALS SCIENCE LETTERS},
volume={21},
number={2},
pages={169-173},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Mitlin D,Radmilovic Velimir R},
year={2000},
title={Deformation pattern and strain hardening in a highly textured 8090 Al-Li alloy sheet},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={291},
number={1-2},
pages={160-167},
document_type={Article},
}