@ARTICLE{
author={Bozic Dusan A,Devecerski Aleksandar B,Dimcic Biljana,Vilotijevic Miroljub N,Rajkovic Viseslava M},
year={2022},
title={Structural and mechanical characteristics of ZA27-7 wt.% SiC composites produced by powder metallurgy techniques},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={95},
number={8},
pages={704-707},
document_type={Article},
} 

@ARTICLE{
author={Ruzic Jovana Dj,Stasic Jelena M,Rajkovic Viseslava M,Raic Karlo T,Bozic Dusan A},
year={2015},
title={Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques},
journal={SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS},
volume={22},
number={6},
pages={665-671},
document_type={Article},
} 

@ARTICLE{
author={Stasic Jelena M,Rajkovic Viseslava M,Ruzic Jovana Dj,Bozic Dusan A},
year={2015},
title={An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={80},
number={5-8},
pages={1049-1057},
document_type={Article},
} 

@ARTICLE{
author={Stasic Jelena M,Trtica Milan S,Rajkovic Viseslava M,Ruzic Jovana Dj,Bozic Dusan A},
year={2014},
title={Laser sintering of Cu-Zr-ZrB2 composite},
journal={APPLIED SURFACE SCIENCE},
volume={321},
number={},
pages={353-357},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Stasic Jelena M,Wang Huaiwen,Jovanovic Milan T},
year={2014},
title={Processing, characterization and properties of copper-based composites strengthened by low amount of alumina particles},
journal={POWDER TECHNOLOGY},
volume={268},
number={},
pages={392-400},
document_type={Article},
} 

@ARTICLE{
author={Ruzic Jovana Dj,Stasic Jelena M,Rajkovic Viseslava M,Bozic Dusan A},
year={2014},
title={Synthesis, microstructure and mechanical properties of ZrB2 nano and microparticle reinforced copper matrix composite by in situ processings},
journal={MATERIALS & DESIGN},
volume={62},
number={},
pages={409-415},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Stasic Jelena M,Jovanovic Milan T,Wang Huaiwen},
year={2014},
title={Properties of Copper-Based Composite Reinforced with Al2O3 Particles of Different Size},
journal={MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3},
volume={875-877},
number={},
pages={318-323},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bozic Dusan A,Ruzic Jovana Dj,Stasic Jelena M,Rajkovic Viseslava M},
year={2014},
title={Synthesis and characteristics of precipitation hardened Cu-Cr alloy and multiply hardened Cu-Cr-Al2O3 nanocomposite obtained using powder metallurgy techniques},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={105},
number={2},
pages={194-199},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Rajkovic Viseslava M,Zivic Fatima T,Mitrovic Slobodan R,Cvijovic-Alagic Ivana Lj,Jovanovic Milan T},
year={2013},
title={The effect of processing techniques on microstructural and tribological properties of copper-based alloys},
journal={APPLIED SURFACE SCIENCE},
volume={280},
number={},
pages={646-654},
document_type={Article},
} 

@ARTICLE{
author={Ruzic Jovana Dj,Stasic Jelena M,Rajkovic Viseslava M,Bozic Dusan A},
year={2013},
title={Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys},
journal={MATERIALS & DESIGN},
volume={49},
number={},
pages={746-754},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Devecerski Aleksandar B,Jovanovic Milan T},
year={2012},
title={Characteristic of copper matrix simultaneously reinforced with nano- and micro-sized Al2O3 particles},
journal={MATERIALS CHARACTERIZATION},
volume={67},
number={},
pages={129-137},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Stasic Jelena M,Ruzic Jovana Dj,Vilotijevic Miroljub N,Rajkovic Viseslava M},
year={2011},
title={Synthesis and properties of a Cu-Ti-TiB(2) composite hardened by multiple mechanisms},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={528},
number={28},
pages={8139-8144},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Stasic Jelena M,Dimcic Biljana,Vilotijevic Miroljub N,Rajkovic Viseslava M},
year={2011},
title={Multiple strengthening mechanisms in nanoparticle-reinforced copper matrix composites},
journal={BULLETIN OF MATERIALS SCIENCE},
volume={34},
number={2},
pages={217-226},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Stasic Jelena M,Rajkovic Viseslava M},
year={2011},
title={Microstructures and Mechanical Properties of ZA27-Al(2)O(3) Composites Obtained by Powder Metallurgy Process},
journal={SCIENCE OF SINTERING},
volume={43},
number={1},
pages={63-70},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Rajkovic Viseslava M,Jovanovic Milan T,Dimcic Biljana},
year={2011},
title={Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy},
journal={POWDER METALLURGY},
volume={54},
number={1},
pages={40-45},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Devecerski Aleksandar B,Bojanic Slobodan,Jovanovic Milan T},
year={2010},
title={Strength and thermal stability of Cu-Al2O3 composite obtained by internal oxidation},
journal={REVISTA DE METALURGIA},
volume={46},
number={6},
pages={520-529},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2010},
title={Properties of copper composites strengthened by nano- and micro-sized Al2O3 particles},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={101},
number={3},
pages={334-339},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2010},
title={Effects of copper and Al2O3 particles on characteristics of Cu-Al2O3 composites},
journal={MATERIALS & DESIGN},
volume={31},
number={4},
pages={1962-1970},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Dimcic Biljana,Dimcic O,Stasic Jelena M,Rajkovic Viseslava M},
year={2010},
title={Influence of SiC particles distribution on mechanical properties and fracture of DRA alloys},
journal={MATERIALS & DESIGN},
volume={31},
number={1},
pages={134-141},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Popovic Milica M,Jovanovic Milan T},
year={2009},
title={The Influence of Powder Particle Size on Properties of Cu-Al2O3 Composites},
journal={SCIENCE OF SINTERING},
volume={41},
number={2},
pages={185-192},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Cvijovic-Alagic Ivana Lj,Dimcic Biljana,Stasic Jelena M,Rajkovic Viseslava M},
year={2009},
title={In-situ Processing of TiB2 Nanoparticle-Reinforced Copper Matrix Composites},
journal={SCIENCE OF SINTERING},
volume={41},
number={2},
pages={143-150},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2009},
title={Characteristics of Cu-Al2O3 composites of various starting particle size obtained by high-energy milling},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={74},
number={5},
pages={595-605},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Sekulic Danijela R,Stasic Jelena M,Rajkovic Viseslava M,Jovanovic Milan T},
year={2008},
title={The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={99},
number={11},
pages={1268-1274},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Dimcic O,Dimcic Biljana,Cvijovic Ivana Lj,Rajkovic Viseslava M},
year={2008},
title={The combination of precipitation and dispersion hardening in powder metallurgy produced Cu-Ti-Si alloy},
journal={MATERIALS CHARACTERIZATION},
volume={59},
number={8},
pages={1122-1126},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2008},
title={Properties of copper matrix reinforced with nano- and micro-sized Al2O3 particles},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={459},
number={1-2},
pages={177-184},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2008},
title={Properties of copper matrix reinforced with various size and amount Of Al2O3 particles},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={200},
number={1-3},
pages={106-114},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Devecerski Aleksandar B},
year={2007},
title={The properties of high-energy milied pre-alloyed copper powders containing 1 wt.% Al},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={72},
number={1},
pages={45-53},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2006},
title={Properties of dispersion hardened copper processed by internal oxidation in air},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={44},
number={3},
pages={175-179},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2006},
title={Characterization of prealloyed copper powders treated in high energy ball mill},
journal={MATERIALS CHARACTERIZATION},
volume={57},
number={2},
pages={94-99},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Vracaric Dusan D,Romhanji Endre L},
year={2005},
title={Properties of dispersion-hardened copper made by internal oxidation of prealloyed copper powder containing 2.5wt. % Al},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={493-497},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Vilotijevic Miroljub N,Rajkovic Viseslava M,Gnjidic Zaklina},
year={2005},
title={Mechanical and fracture behaviour of a SiC-particle-reinforced aluminum alloy at high temperature},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={487-491},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Eric Olivera A,Bozic Dusan A,Mitkov Mirjana V,Romhanji Endre L},
year={2004},
title={Characterization of dispersion strengthened copper with 3wt%Al2O3 by mechanical alloying},
journal={SCIENCE OF SINTERING},
volume={36},
number={3},
pages={205-211},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Devecerski Aleksandar B,Dimcic Biljana,Vilotijevic Miroljub N,Rajkovic Viseslava M},
year={2004},
title={Structural and mechanical characteristics of ZA27-7 wt.% SiC composites produced by powder metallurgy techniques},
journal={ZEITSCHRIFT FUR METALLKUNDE},
volume={95},
number={8},
pages={704-707},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Devecerski Aleksandar B,Eric Olivera A,Rajkovic Viseslava M,Gnjidic Zaklina},
year={2004},
title={Effects of structure characteristics on mechanical properties of aluminum alloy matrix composites},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={515-520},
document_type={Article},
} 

@ARTICLE{
author={Sreckovic Milesa Z,Ivanovic Nenad B,Rajkovic Viseslava M,Bojanic Slobodan,Vulicevic Ljubomir M,Grozdanovski D,Grozdanovski M,Petrovic Vladimir V},
year={2003},
title={Laser interaction with some Bi-ferrites},
journal={JOURNAL OF MATERIALS SCIENCE LETTERS},
volume={22},
number={23},
pages={1727-1730},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Romhanji Endre L,Mitkov Mirjana V},
year={2002},
title={Characterization of high-energy ball milled prealloyed copper powder containing 2.5 wt%Al},
journal={JOURNAL OF MATERIALS SCIENCE LETTERS},
volume={21},
number={2},
pages={169-173},
document_type={Article},
} 

@ARTICLE{
author={Sreckovic Milesa Z,Kovacevic Aleksander G,Bojanic Slobodan,Vulicevic Ljubomir M,Ristic Slavica S,Rajkovic Viseslava M},
year={2001},
title={Damages induced by laser beams in organic materials},
journal={LASER PHYSICS},
volume={11},
number={3},
pages={336-342},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Mitkov Mirjana V},
year={2000},
title={Dispersion hardened Cu-Al2O3 produced by high energy milling},
journal={INTERNATIONAL JOURNAL OF POWDER METALLURGY},
volume={36},
number={8},
pages={45-49},
document_type={Article},
}