@ARTICLE{
author={Stamenkovic Dejan D,Popovic Miljana M,Rudolf Rebeka,Zrilic Milorad M,Raic Karlo T,Obradovic-Djuricic Kosovka,Stamenkovic Dragoslav S},
year={2023},
title={Comparative Study of the Microstructure and Properties of Cast-Fabricated and 3D-Printed Laser-Sintered Co-Cr Alloys for Removable Partial Denture Frameworks},
journal={MATERIALS},
volume={16},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mihailovic Marija D,Raic Karlo T},
year={2021},
title={Algorithm for Quantifying the Particle Size Distribution of Non-Metallic Inclusions Formation in Steel Production},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={27},
number={4},
pages={437-447},
document_type={Article},
} 

@ARTICLE{
author={Slovic Zoran M,Bradaric Toma D,Raic Karlo T,Slovic JZ},
year={2021},
title={Estimation of Phosphorus Distribution Ratio at the End of Blowing in Bof},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={27},
number={4},
pages={425-436},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T},
year={2020},
title={Simulation of Velocity Profile Inside Turbulent Boundary Layer},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={26},
number={1},
pages={137-141},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T},
year={2016},
title={An explanation of hillock growth in thin Al films},
journal={SURFACE ENGINEERING},
volume={32},
number={11},
pages={823-828},
document_type={Article},
} 

@ARTICLE{
author={Ruzic Jovana Dj,Stasic Jelena M,Rajkovic Viseslava M,Raic Karlo T,Bozic Dusan A},
year={2015},
title={Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques},
journal={SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS},
volume={22},
number={6},
pages={665-671},
document_type={Article},
} 

@ARTICLE{
author={Mihailovic Marija D,Raic Karlo T,Pataric Aleksandra S,Volkov-Husovic Tatjana D},
year={2015},
title={The Nano-Wetting Aspect at the Liquid-Metal/SiC Interface},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={3},
pages={413-416},
document_type={Article},
} 

@ARTICLE{
author={Rudolf Rebeka,Stamenkovic Dragoslav S,Aleksic Zoran M,Jenko Monika,Djordjevic Igor,Todorovic Aleksandar J,Jokanovic Vukoman R,Raic Karlo T},
year={2015},
title={Hydroxyapatite Coatings on Cp-Titanium Grade-2 Surfaces Prepared with Plasma Spraying},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={1},
pages={81-86},
document_type={Article},
} 

@ARTICLE{
author={Ruzic Jovana Dj,Stasic Jelena M,Markovic Smilja B,Raic Karlo T,Bozic Dusan A},
year={2014},
title={Synthesis and Characterization of Cu-ZrB2 Alloy Produced by PM Techniques},
journal={SCIENCE OF SINTERING},
volume={46},
number={2},
pages={217-224},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Dolic Natalija,Raic Karlo T,Radisa Radomir},
year={2014},
title={Identification of Phases Formed by Cu and Ni in Al-Si Piston Alloys},
journal={METALLURGIA ITALIANA},
volume={},
number={3},
pages={13-19},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Markovic Srdjan V,Acimovic-Pavlovic Zagorka S,Raic Karlo T,Radisa Radomir},
year={2013},
title={Effect of Heat Treatment on the Microstructure and Mechanical Properties of Piston Alloys},
journal={MATERIALI IN TEHNOLOGIJE},
volume={47},
number={5},
pages={585-591},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Acimovic-Pavlovic Zagorka S,Raic Karlo T,Radisa Radomir,Kvrgic Vladimir M},
year={2013},
title={Optimisation of cast pistons made of Al-Si piston alloy},
journal={INTERNATIONAL JOURNAL OF CAST METALS RESEARCH},
volume={26},
number={5},
pages={255-261},
document_type={Article},
} 

@ARTICLE{
author={Slovic Zoran M,Raic Karlo T,Nedeljkovic Ljubomir,Volkov-Husovic Tatjana D},
year={2012},
title={Relationship Between the Calculated Oxygen Activity and the Sulfur Partition Ratio for Cao-Al2o3-Sio2-Mgo Slag During Ladle Refining},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={6},
pages={683-688},
document_type={Article},
} 

@ARTICLE{
author={Slovic Zoran M,Nedeljkovic Ljubomir,Raic Karlo T,Odanovic Zoran D},
year={2012},
title={Relationship between the common optical basicity models and the sulphide capacities of CaO-Al2O3-SiO2-MgO slag},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={50},
number={3},
pages={185-192},
document_type={Article},
} 

@ARTICLE{
author={Najdenov Ivan M,Radisa Radomir,Raic Karlo T},
year={2012},
title={Microeconomics of the materials and energents consumption in a simulated copper casting process},
journal={METALLURGIA ITALIANA},
volume={},
number={5},
pages={51-56},
document_type={News Item},
} 

@ARTICLE{
author={Najdenov Ivan M,Raic Karlo T,Kokeza Gordana},
year={2012},
title={Aspects of energy reduction by autogenous copper production in the copper smelting plant Bor},
journal={ENERGY},
volume={43},
number={1},
pages={376-384},
document_type={Article},
} 

@ARTICLE{
author={Milinkovic Iva Z,Rudolf Rebeka,Raic Karlo T,Aleksic Zoran M,Lazic Vojkan M,Todorovic Aleksandar J,Stamenkovic Dragoslav S},
year={2012},
title={Aspects of Titanium-Implant Surface Modification at the Micro and Nano Levels},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={3},
pages={251-256},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2012},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={4},
pages={8-13},
document_type={Article},
} 

@ARTICLE{
author={Acimovic-Pavlovic Zagorka S,Raic Karlo T,Belic Ilija Z},
year={2011},
title={Modification of piston surfaces by compressed plasma flow},
journal={PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES},
volume={47},
number={6},
pages={797-802},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2011},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={16},
number={12},
pages={52-57},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T,Rudolf Rebeka,Ternik Primoz,Zunic Zoran,Lazic Vojkan M,Stamenkovic Dragoslav S,Tanaskovic Tatjana,Anzel Ivan},
year={2011},
title={CFD Analysis of Exothermic Reactions in Al-Au Nano Multi-Layered Foils},
journal={MATERIALI IN TEHNOLOGIJE},
volume={45},
number={4},
pages={335-338},
document_type={Article},
} 

@ARTICLE{
author={Najdenov Ivan M,Raic Karlo T,Kokeza Gordana},
year={2011},
title={Economic Insight Into Energents Consumption in Copper Melting and Refining Plants of Serbia Using the Method of Reduction to Conditional Fuel (coal Equivalent)},
journal={METALURGIA INTERNATIONAL},
volume={16},
number={10},
pages={79-86},
document_type={Article},
} 

@ARTICLE{
author={Acimovic-Pavlovic Zagorka S,Raic Karlo T,Bobic Ilija Dj,Bobic Biljana M},
year={2011},
title={Synthesis of ZrO2 Particles Reinforced ZA25 Alloy Composites by Compocasting Process},
journal={ADVANCED COMPOSITE MATERIALS},
volume={20},
number={4},
pages={375-384},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Filipovic Dusica,Raic Karlo T,Tasic Milos,Andjic Zoran M,Gavrilovski Milorad P},
year={2011},
title={Reduction of Ultra-fine Tungsten Powder with Tungsten (VI) Oxide in a Vertical Tube Reactor},
journal={MATERIALI IN TEHNOLOGIJE},
volume={45},
number={1},
pages={27-32},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Radisa Radomir,Markovic Srdjan V,Acimovic-Pavlovic Zagorka S,Raic Karlo T},
year={2011},
title={Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg},
journal={INTERMETALLICS},
volume={19},
number={4},
pages={486-492},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T,Rudolf Rebeka,Todorovic Aleksandar J,Stamenkovic Dragoslav S,Anzel Ivan},
year={2010},
title={Liquid Metal/ceramic Interfaces In Dental Practice And Jewellery Manufacturing},
journal={MATERIALI IN TEHNOLOGIJE},
volume={44},
number={2},
pages={59-66},
document_type={Review},
} 

@ARTICLE{
author={Manasijevic Srecko,Radisa Radomir,Markovic Srdjan V,Raic Karlo T,Acimovic-Pavlovic Zagorka S},
year={2009},
title={Implementation of the Infrared Thermography for Thermo-Mechanical Analysis of the AlSi Cast Piston},
journal={PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY},
volume={46},
number={11},
pages={565-579},
document_type={Article},
} 

@ARTICLE{
author={Ciric Radovan,Cantrak Svetislav M,Raic Karlo T,Rudolf Rebeka,Anzel Ivan},
year={2009},
title={Distribution of the Carbide Phase in the Viscoplastic Layer during the Rotational Friction-Welding of Various Steels},
journal={METALS AND MATERIALS INTERNATIONAL},
volume={15},
number={5},
pages={831-841},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T,Rudolf Rebeka,Kosec Borut,Anzel Ivan,Lazic Vojkan M,Todorovic Aleksandar J},
year={2009},
title={Nanofoils For Soldering And Brazing In Dental Joining Practice And Jewellery Manufacturing},
journal={MATERIALI IN TEHNOLOGIJE},
volume={43},
number={1},
pages={3-9},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T},
year={2008},
title={Parallel glide: flow of dislocations with internal stress source/sink distribution},
journal={SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS},
volume={9},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T,Sasic Rajko M},
year={2007},
title={STM image visualization of Si(111) 7 x 7 surface (graphic simulation and implementation)},
journal={APPLIED SURFACE SCIENCE},
volume={253},
number={10},
pages={4501-4506},
document_type={Article},
} 

@ARTICLE{
author={Andjic Zoran M,Korac Marija S,Tasic Milos,Raic Karlo T,Kamberovic Zeljko J},
year={2006},
title={The synthesis of ultrafine and nanocomposite powders based on copper, silver anal alumina},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={44},
number={3},
pages={145-150},
document_type={Article},
} 

@ARTICLE{
author={Raic Karlo T},
year={2006},
title={Modelling of plasma activated CVD of Co-C-O layers in parallel plate reactor},
journal={SURFACE & COATINGS TECHNOLOGY},
volume={200},
number={16-17},
pages={4816-4824},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Drobnjak Djordje V,Raic Karlo T},
year={2001},
title={Determination of activation energy for static recrystallization using multipass continuous cooling torsion test},
journal={RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2},
volume={},
number={},
pages={791-796},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Raic Karlo T},
year={2000},
title={An approach to laminar phenomena occurring on external and internal surfaces of solid specimens},
journal={INTERFACE SCIENCE},
volume={8},
number={1},
pages={85-94},
document_type={Article},
}