@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Dikic Stefan,Radovic Ljubica M,Radovic Nenad A},
year={2026},
title={Fracture Behavior of Hadfield Cast Steels Exposed to Impact Loading},
journal={METALS},
volume={16},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Tadic Srdjan S,Perkovic Srdja,Radovic Nenad A},
year={2025},
title={The Effect of Composition and Heat Treatment on Impact Toughness of Hadfield Steel},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={32},
number={6},
pages={2217-2222},
document_type={Article},
} 

@ARTICLE{
author={Ahmed Esmail Ali Salem,Vuherer Tomaz,Grabulov Vencislav K,Glisic Dragomir M,Dikic Stefan,Radovic Nenad A},
year={2025},
title={Contribution to the Study of Toughness in Creep Resistant Steel Welded Joint},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={61},
number={1},
pages={99-109},
document_type={Article},
} 

@ARTICLE{
author={Vukosavljevic Aleksandar,Sedmak Aleksandar S,Tadic Srdjan S,Radovic Ljubica M,Radovic Nenad A},
year={2025},
title={Influence of Chemical Composition and Heat Treatmenton Hardness and Strength of a Hadfield Steel},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={1},
pages={11-14},
document_type={Article},
} 

@ARTICLE{
author={Ahmed Esmail Ali Salem,Radovic Nenad A,Glisic Dragomir M,Dikic Stefan,Milovanovic Nikola A,Opacic Mirjana F,Lozanovic Jasmina V},
year={2025},
title={Fracturing in 14MoV6-3 Steel Weld Joints-Including Base Metals-After a Short Time in Service},
journal={METALS},
volume={15},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Musrati Walid,Medjo Bojan I,Sedmak Aleksandar S,Radovic Nenad A},
year={2024},
title={Numerical Simulation of Friction Stir Welding- the Plunge Stage in T-Joint},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={105-110},
document_type={Article},
} 

@ARTICLE{
author={Baljozovic Andreja,Glisic Dragomir M,Radovic Nenad A,Radovanovic Zeljko M,Bascarevic Zoran Lj},
year={2023},
title={An Extremely Rare Case of Cementless Third Generation Corail Stem Neck Fracture With Fractographic Analysis},
journal={ARTHROPLASTY TODAY},
volume={22},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Gvozden B,Glisic Dragomir M,Dikic Stefan,Medjo Bojan I,Markovic Branislav R,Vukovic Nikola S,Radovic Nenad A},
year={2023},
title={Determining the Role of Acicular Ferrite Carbides in Cleavage Fracture Crack Initiation for Two Medium Carbon Microalloyed Steels},
journal={MATERIALS},
volume={16},
number={22},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Radovic Nenad A,Rakin Marko P,Sedmak Aleksandar S,Medjo Bojan I,Mrdak Mihailo R,Bajic Darko R},
year={2023},
title={Influence of Temperature and Plastic Deformation on AA2024 T3 Friction Stir Welded Joint Microstructure},
journal={THERMAL SCIENCE},
volume={27},
number={1},
pages={311-320},
document_type={Article},
} 

@ARTICLE{
author={Tanaskovic Jovan D,Franklin Francis J,Radovic Nenad A,Zivic Fatima T},
year={2022},
title={Structural Design of Safety Steel Device of Railway Vehicles Through Analytical and Experimental Investigations},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={6},
pages={21-33},
document_type={Article},
} 

@ARTICLE{
author={Dikic Stefan,Glisic Dragomir M,Fadel Abdunaser Hamza,Jovanovic Gvozden B,Radovic Nenad A},
year={2022},
title={Physical simulation of finish rolling of microalloyed steels in isothermal conditions},
journal={HEMIJSKA INDUSTRIJA},
volume={76},
number={4},
pages={227-236},
document_type={Article},
} 

@ARTICLE{
author={Veljic Darko M,Rakin Marko P,Sedmak Aleksandar S,Radovic Nenad A,Medjo Bojan I,Mrdak Mihailo R,Bajic Darko R},
year={2022},
title={Thermo-Mechanical Analysis of Linear Welding Stage in Friction Stir Welding Influence of Welding Parameters},
journal={THERMAL SCIENCE},
volume={26},
number={3},
pages={2125-2134},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Gvozden B,Glisic Dragomir M,Dikic Stefan,Radovic Nenad A,Pataric Aleksandra S},
year={2022},
title={Cleavage Fracture of the Air Cooled Medium Carbon Microalloyed Forging Steels with Heterogeneous Microstructures},
journal={MATERIALS},
volume={15},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vuksic-Popovic Marija,Tanaskovic Jovan D,Glisic Dragomir M,Radovic Nenad A,Franklin Francis J},
year={2021},
title={Experimental and numerical research on the failure of railway vehicles coupling links},
journal={ENGINEERING FAILURE ANALYSIS},
volume={127},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dikic Stefan,Glisic Dragomir M,Fadel Abdunnaser H,Jovanovic Gvozden B,Radovic Nenad A},
year={2021},
title={Structure and Strength of Isothermally Heat-Treated Medium Carbon Ti-V Microalloyed Steel},
journal={METALS},
volume={11},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Simic Marko,Radovic Nenad A,Gordic Milan V,Ruzic Jovana Dj},
year={2020},
title={Effect of Process Parameters on the Phase Transformation Kinetics in Copper-Based Alloys and Composites},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={26},
number={4},
pages={365-373},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Vukicevic Goran,Glisic Dragomir M,Dikic Stefan},
year={2019},
title={Some Aspects of Physical Metallurgy of Microalloyed Steels},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={25},
number={4},
pages={247-263},
document_type={Review},
} 

@ARTICLE{
author={Gligorijevic Bojan R,Vilotijevic Miroljub N,Scepanovic Maja J,Radovanovic Radovan V,Radovic Nenad A},
year={2017},
title={Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures},
journal={HEMIJSKA INDUSTRIJA},
volume={71},
number={3},
pages={241-249},
document_type={Article},
} 

@ARTICLE{
author={Glisic Dragomir M,Radovic Nenad A,Drobnjak Djordje V,Fadel Abdunnaser H},
year={2017},
title={Cleavage Fracture in Continuously Cooled V-Microalloyed Medium Carbon Steel},
journal={FRACTURE AT ALL SCALES},
volume={},
number={},
pages={209-219},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Murariu Alin Constantin,Veljic Darko M,Barjaktarevic Dragana R,Rakin Marko P,Radovic Nenad A,Sedmak Aleksandar S,Djokovic Jelena M},
year={2016},
title={Influence of Material Velocity on Heat Generation During Linear Welding Stage of Friction Stir Welding},
journal={THERMAL SCIENCE},
volume={20},
number={5},
pages={1693-1701},
document_type={Article},
} 

@ARTICLE{
author={Gligorijevic Bojan R,Vilotijevic Miroljub N,Scepanovic Maja J,Vidovic Dragoslav,Radovic Nenad A},
year={2016},
title={Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={687},
number={},
pages={421-430},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila,Radovic Nenad A,Llic Vojislav,Debeljkovic Aleksandra D},
year={2016},
title={The ability of using the cavitation phenomenon as a tool to modify the surface characteristics in micro- and in nano-level},
journal={TRIBOLOGY INTERNATIONAL},
volume={101},
number={},
pages={88-97},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A,Bonyar Attila},
year={2016},
title={The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process},
journal={INTERNATIONAL JOURNAL OF MULTIPHASE FLOW},
volume={83},
number={},
pages={27-38},
document_type={Article},
} 

@ARTICLE{
author={Gligorijevic Bojan R,Vilotijevic Miroljub N,Scepanovic Maja J,Vukovic Nikola S,Radovic Nenad A},
year={2016},
title={Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings},
journal={CERAMICS INTERNATIONAL},
volume={42},
number={1},
pages={411-420},
document_type={Article},
} 

@ARTICLE{
author={Radisavljevic Igor Z,Zivkovic Aleksandar B,Grabulov Vencislav K,Radovic Nenad A},
year={2015},
title={Influence of pin geometry on mechanical and structural properties of butt friction stir welded 2024-T351 aluminum alloy},
journal={HEMIJSKA INDUSTRIJA},
volume={69},
number={3},
pages={323-330},
document_type={Article},
} 

@ARTICLE{
author={Glisic Dragomir M,Radovic Nenad A,Drobnjak Djordje V,Fadel Abdunnaser H},
year={2014},
title={Critical stress for cleavage fracture in continuously cooled medium carbon V-microalloyed steel},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={1226-1231},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Eramah Abdsalam M,Rakin Marko P,Veljic Darko M,Tadic Srdjan S,Radovic Nenad A,Zrilic Milorad M,Perovic Milenko M},
year={2014},
title={Influence of Friction Stir Welding Parameters on Properties of 2024 T3 Aluminium Alloy Joints},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S21-S28},
document_type={Article},
} 

@ARTICLE{
author={Fadel Abdunnaser H,Glisic Dragomir M,Radovic Nenad A,Drobnjak Djordje V},
year={2013},
title={Intragranular Ferrite Morphologies in Medium Carbon Vanadium-Microalloyed Steel},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={49},
number={3},
pages={237-244},
document_type={Article},
} 

@ARTICLE{
author={Radisavljevic Igor Z,Zivkovic Aleksandar B,Radovic Nenad A,Grabulov Vencislav K},
year={2013},
title={Influence of FSW parameters on formation quality and mechanical properties of Al 2024-T351 butt welded joints},
journal={TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA},
volume={23},
number={12},
pages={3525-3539},
document_type={Article},
} 

@ARTICLE{
author={Glisic Dragomir M,Fadel Abdunnaser H,Radovic Nenad A,Drobnjak Djordje V,Zrilic Milorad M},
year={2013},
title={Deformation behaviour of two continuously cooled vanadium microalloyed steels at liquid nitrogen temperature},
journal={HEMIJSKA INDUSTRIJA},
volume={67},
number={6},
pages={981-988},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A},
year={2013},
title={Nano- and Micro-Scale Surface Modification of FCC Metal Using High Submerged Cavitating Water Jet},
journal={PLASMONICS},
volume={8},
number={2},
pages={843-849},
document_type={Article},
} 

@ARTICLE{
author={Fadel Abdunnaser H,Glisic Dragomir M,Radovic Nenad A,Drobnjak Djordje V},
year={2012},
title={Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels},
journal={JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY},
volume={28},
number={11},
pages={1053-1058},
document_type={Article},
} 

@ARTICLE{
author={Perovic Milenko,Veljic Darko M,Rakin Marko P,Radovic Nenad A,Sedmak Aleksandar S,Bajic Nikola S},
year={2012},
title={Friction-Stir Welding of High-Strength Aluminium Alloys and a Numerical Simulation of the Plunge Stage},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={3},
pages={215-221},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Koprivica Ankica,Glisic Dragomir M,Fadel Abdunnaser H,Drobnjak Djordje V},
year={2010},
title={Influence of V and N on Transformation Behavior and Mechanical Properties of Medium Carbon Forging Steels},
journal={THERMEC 2009, PTS 1-4},
volume={638-642},
number={},
pages={3459-3464},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Glisic Dragomir M,Radovic Nenad A,Koprivica Ankica,Fadel Abdunnaser H,Drobnjak Djordje V},
year={2010},
title={Influence of Reheating Temperature and Vanadium Content on Transformation Behavior and Mechanical Properties of Medium Carbon Forging Steels},
journal={ISIJ INTERNATIONAL},
volume={50},
number={4},
pages={601-606},
document_type={Article},
} 

@ARTICLE{
author={Gligorijevic Bojan R,Schmidt Harald HHW,Radovic Nenad A,Davidovic Milorad P,Kutin Marina M,Janicijevic Aco J},
year={2010},
title={Short-circuit Oxygen Diffusion In Thermally Grown Silica Layer},
journal={INTERNATIONAL JOURNAL OF MODERN PHYSICS B},
volume={24},
number={6-7},
pages={682-694},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Simic Goran Z,Lucanin Vojkan J,Tanaskovic Jovan D,Radovic Nenad A},
year={2009},
title={Experimental research of characteristics of shock absorbers of impact energy of passenger coaches},
journal={EXPERIMENTAL TECHNIQUES},
volume={33},
number={4},
pages={29-35},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Kamberovic Zeljko J,Panias Dimitrios},
year={2009},
title={Cleaner Metallurgical Industry in Serbia: A Road To the Sustainable Development},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={15},
number={1},
pages={1-4},
document_type={Article},
} 

@ARTICLE{
author={Vratnica M,Cvijovic Zorica M,Radovic Nenad A},
year={2008},
title={THE EFFECT OF COMPOSITIONAL VARIATIONS ON THE FRACTURE TOUGHNESS OF 7000 Al-ALLOYS},
journal={MATERIALI IN TEHNOLOGIJE},
volume={42},
number={5},
pages={191-196},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A},
year={2008},
title={Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion},
journal={ARCHIVE OF APPLIED MECHANICS},
volume={78},
number={5},
pages={329-341},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A},
year={2003},
title={Correlation between apparent activation energy for hot working and temperature of no recrystallization in microalloyed steels},
journal={THERMEC'2003, PTS 1-5},
volume={426-4},
number={},
pages={1553-1558},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Drobnjak Djordje V,Raic Karlo T},
year={2001},
title={Determination of activation energy for static recrystallization using multipass continuous cooling torsion test},
journal={RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2},
volume={},
number={},
pages={791-796},
document_type={Proceedings Paper},
}