@ARTICLE{
author={Madic Milos J,Gostimirovic Marin P,Rodic Dragan Dj,Radovanovic Miroslav R,Coteata Margareta},
year={2022},
title={Mathematical Modelling of the Co2 Laser Cutting Process Using Genetic Programming},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={20},
number={3},
pages={665-676},
document_type={Article},
} 

@ARTICLE{
author={Stanojkovic Jelena,Radovanovic Miroslav R},
year={2022},
title={Influence of the Cutting Parameters on Force, Moment and Surface Roughness in the End Milling of Aluminum 6082-T6},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={20},
number={1},
pages={157-165},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Miroslav R},
year={2020},
title={Multi-Objective Optimization of Abrasive Water Jet Cutting Using MOGA},
journal={23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING},
volume={47},
number={},
pages={781-787},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Trifunovic Milan B,Madic Milos J,Radovanovic Miroslav R},
year={2020},
title={Pareto optimization of multi-pass turning of grey cast iron with practical constraints using a deterministic approach},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={110},
number={7-8},
pages={1893-1909},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Mladenovic Srdjan T,Gostimirovic Marin P,Radovanovic Miroslav R,Jankovic Predrag Lj},
year={2020},
title={Laser cutting optimization model with constraints: Maximization of material removal rate in CO2 laser cutting of mild steel},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE},
volume={234},
number={10},
pages={1323-1332},
document_type={Article},
} 

@ARTICLE{
author={Jankovic Predrag Lj,Madic Milos J,Radovanovic Miroslav R,Petkovic Dusan Lj,Mladenovic Srdjan T},
year={2019},
title={Optimization of Surface Roughness from Different Aspects in High-Power CO2 Laser Cutting of AA5754 Aluminum Alloy},
journal={ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING},
volume={44},
number={12},
pages={10245-10256},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Radovan H,Lucic Miroslav V,Nedic Bogdan P,Radovanovic Miroslav R},
year={2019},
title={Calculation of Temperature Fields During Lathe Machining with Thermoelectrical Cooling by Using the Finite Element Method},
journal={THERMAL SCIENCE},
volume={23},
number={3},
pages={1889-1899},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Miroslav R},
year={2019},
title={Multi-objective optimization of multi-pass turning AISI 1064 steel},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={100},
number={1-4},
pages={87-100},
document_type={Article},
} 

@ARTICLE{
author={Jankovic Predrag Lj,Madic Milos J,Petkovic Dusan Lj,Radovanovic Miroslav R},
year={2018},
title={Analysis and Modeling of the Effects of Process Parameters on Specific Cutting Energy in Abrasive Water Jet Cutting},
journal={THERMAL SCIENCE},
volume={22},
number={},
pages={S1459-S1470},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Gostimirovic Marin P,Pucovsky Vladimir V,Sekulic Milenko,Radovanovic Miroslav R,Madic Milos J},
year={2018},
title={Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={32},
number={10},
pages={4775-4785},
document_type={Article},
} 

@ARTICLE{
author={Gostimirovic Marin P,Radovanovic Miroslav R,Madic Milos J,Rodic Dragan Dj,Kulundzic Nenad R},
year={2018},
title={Inverse electro-thermal analysis of the material removal mechanism in electrical discharge machining},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={97},
number={5-8},
pages={1861-1871},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Miroslav R},
year={2017},
title={Multi-objective optimization of single pass turning using performance diagrams},
journal={MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC)},
volume={137},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Madic Milos J,Antucheviciene Jurgita,Radovanovic Miroslav R,Petkovic Dusan Lj},
year={2017},
title={Determination of laser cutting process conditions using the preference selection index method},
journal={OPTICS AND LASER TECHNOLOGY},
volume={89},
number={},
pages={214-220},
document_type={Article},
} 

@ARTICLE{
author={Petkovic Dusan Lj,Madic Milos J,Radovanovic Miroslav R,Jankovic Predrag Lj,Radenkovic Goran M},
year={2016},
title={Modeling of Cutting Temperature in the Biomedical Stainless Steel Turning Process},
journal={THERMAL SCIENCE},
volume={20},
number={},
pages={S1345-S1354},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Madic Milos J,Antucheviciene Jurgita,Radovanovic Miroslav R,Petkovic Dusan Lj},
year={2016},
title={Determination of Manufacturing Process Conditions by Using MCDM Methods: Application in Laser Cutting},
journal={INZINERINE EKONOMIKA-ENGINEERING ECONOMICS},
volume={27},
number={2},
pages={144-150},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R,Nedic Bogdan P,Marusic Vlatko},
year={2015},
title={Multi-Objective Optimization of Cut Quality Characteristics in CO2 Laser Cutting of Stainless Steel},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={4},
pages={885-892},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R,Slatineanu Laurentiu,Dodun Oana},
year={2014},
title={Optimization of Laser Cut Quality Characteristics Considering Material Removal Rate Based on Pareto Concept},
journal={ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING},
volume={657},
number={},
pages={216-220},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Madic Milos J,Jankovic Predrag Lj,Slatineanu Laurentiu,Radovanovic Miroslav R},
year={2014},
title={Artificial Intelligence Model for the Prediction of Cut Quality in Abrasive Water Jet Cutting},
journal={ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING},
volume={657},
number={},
pages={206-210},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Slatineanu Laurentiu,Mircescu C,Coteata Margareta,Dodun Oana,Besliu Irina,Radovanovic Miroslav R},
year={2014},
title={Characteristics of Obtaining External Cylindrical Surfaces by Ram Electrodischarge Machining},
journal={2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST AND 3RD INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (ICPR-AEM 2014)},
volume={},
number={},
pages={457-462},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Nikolic Radovan H,Radovanovic Miroslav R,Zivkovic Miroslav M,Nikolic Aleksandar V,Rakic Dragan M,Blagojevic Milan R},
year={2014},
title={Modeling of Thermoelectric Module Operation in Inhomogeneous Transient Temperature Field Using Finite Element Method},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S239-S250},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Marko,Madic Milos J,Radovanovic Miroslav R,Rancic Dejan D},
year={2014},
title={Software prototype for solving multi-objective machining optimization problems: Application in non-conventional machining processes},
journal={EXPERT SYSTEMS WITH APPLICATIONS},
volume={41},
number={13},
pages={5657-5668},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R,Manic Miodrag T,Trajanovic Miroslav D},
year={2014},
title={Optimization of ANN models using different optimization methods for improving CO2 laser cut quality characteristics},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={36},
number={1},
pages={91-99},
document_type={Article},
} 

@ARTICLE{
author={Jankovic Predrag Lj,Radovanovic Miroslav R,Baralic Jelena C,Nedic Bogdan P},
year={2013},
title={Prediction Model of Surface Roughness in Abrasive Water Jet Cutting of Aluminium Alloy},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={19},
number={4},
pages={585-595},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Marko,Madic Milos J,Radovanovic Miroslav R},
year={2013},
title={Software prototype for validation of machining optimization solutions obtained with meta-heuristic algorithms},
journal={EXPERT SYSTEMS WITH APPLICATIONS},
volume={40},
number={17},
pages={6985-6996},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Marinkovic Velibor,Radovanovic Miroslav R},
year={2013},
title={Optimization of the kerf quality characteristics in CO2 laser cutting of AISI 304 stainless steel based on Taguchi method},
journal={MECHANIKA},
volume={},
number={5},
pages={580-587},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2013},
title={Modeling and analysis of correlations between cutting parameters and cutting force components in turning AISI 1043 steel using ANN},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={35},
number={2},
pages={111-121},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2013},
title={Application of RCGA-ANN approach for modeling kerf width and surface roughness in CO2 laser cutting of mild steel},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={35},
number={2},
pages={103-110},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2013},
title={Multi-Objective Optimization of Surface Roughness and Material Removal Rate in CO2 Laser Cutting Using ANN and NSGA-II},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={3},
pages={43-46},
document_type={Article},
} 

@ARTICLE{
author={Slatineanu Laurentiu,Coteata Margareta,Besliu Irina,Mourao Antonio,Radovanovic Miroslav R,Gherman Lorelei},
year={2012},
title={Behaviour of Metallic Materials Under the Action of the Laser Beam},
journal={MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II},
volume={},
number={},
pages={897-900},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Herghelegiu Eugen,Shnakovszky Carol,Radovanovic Miroslav R,Raveica Crinel Ionel},
year={2012},
title={Comparative Study on the Dimensional Accuracy and Surface Quality of Plates Cut Through Unconventional Methods},
journal={MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II},
volume={},
number={},
pages={433-436},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2012},
title={Analysis of the Heat Affected Zone in CO2 Laser Cutting of Stainless Steel},
journal={THERMAL SCIENCE},
volume={16},
number={},
pages={S363-S373},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Marinkovic Velibor,Radovanovic Miroslav R},
year={2012},
title={Mathematical modeling and optimization of surface roughness in turning of polyamide based on artificial neural network},
journal={MECHANIKA},
volume={},
number={5},
pages={574-581},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Radovan H,Radovanovic Miroslav R,Karic Marina,Pesic Olivera},
year={2012},
title={Simulation of Cutting Tools Cooling by the System on the Basis of Thermoelectric Modules},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={10},
pages={130-137},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Radovan H,Radovanovic Miroslav R,Karic Marina,Pesic Olivera},
year={2012},
title={Simulation of Cutting Tools Cooling by the System on the Basis of Thermoelectric Modules},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={9},
pages={203-210},
document_type={Article},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2012},
title={Investigation Into the Effect of the Cutting Parameters on the Burr Height in Co2 Laser Nitrogen Cutting of Aisi 304 Stainless Steel},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={7},
pages={74-78},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Miroslav R,Madic Milos J},
year={2011},
title={A Study on Traverse Rate of Separation Cut in Abrasive Water Jet Cutting of Carbon Steel S275JR Using Regression Analysis Method},
journal={PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2011), VOL I},
volume={},
number={},
pages={227-230},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Madic Milos J,Radovanovic Miroslav R},
year={2011},
title={Mathematical Model of Awj Cutting of Carbon Steel S275JR Based on Ann},
journal={PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2011), VOL I},
volume={},
number={},
pages={35-38},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Slatineanu Laurentiu,Radovanovic Miroslav R,Braha Vasile,Potarniche Stefan,Coteata Margareta,Grigoras Besliu Irina},
year={2011},
title={Phenomena at Surface Abrasive Jet Machining},
journal={MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II},
volume={},
number={},
pages={1013-1016},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petropoulos Georgios P,Vaxevanidis Nikolaos M,Radovanovic Miroslav R,Zoler Carol},
year={2009},
title={Morphological - Functional Aspects of Electro-Discharge Machined Surface Textures},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={2},
pages={95-103},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Radovanovic Miroslav R},
year={2006},
title={Some possibilities for determining cutting data when using laser cutting},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERI},
volume={52},
number={10},
pages={645-652},
document_type={Article},
} 

@ARTICLE{
author={Dasic Predrag V,Franek Friedrich,Assenova E,Radovanovic Miroslav R},
year={2003},
title={International standardization and organizations in the field of tribology},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={55},
number={6},
pages={287-291},
document_type={Article},
}