Pjevic Milos D (2025) Additive Technologies in the Service of Advanced Robotics and Vice Versa, 2025 12TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING, ICETRAN, vol. , br. , str. - (Proceedings Paper) 

Milutinovic Mladomir,Movrin Dejan,Pjevic Milos D,Popovic Mihajlo D (2025) Additive Manufacturing: A Key to Advancing Injection Molding Efficiency, TEHNICKI GLASNIK-TECHNICAL JOURNAL, vol. 19, br. , str. 141-146 (Review) 

Jankovic Milan M,Balac Igor M,Popovic Mihajlo D,Pjevic Milos D,Milos Marko V (2024) Tensile strength and stiffness properties of additively manufactured PET-G polymer-based composite plates reinforced with different weight fractions of short carbon fibers, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 38, br. 6, str. 2971-2977 (Article) 

Popovic Mihajlo D,Pjevic Milos D,Milovanovic Aleksa Lj,Mladenovic Goran MO,Milosevic Milos S (2023) Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 37, br. 2, str. 697-706 (Article) 

Pjevic Milos D,Popovic Mihajlo D,Tanovic Ljubodrag M (2021) Experimental investigation of the tool radius and micro-cutting speed influence on micro-cutting mechanisms for marble based material, SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, vol. 9, br. 1, str. - (Article) 

Mladenovic Goran MO,Milovanovic Marko,Tanovic Ljubodrag M,Puzovic Radovan,Pjevic Milos D,Popovic Mihajlo D,Stojadinovic Slavenko M (2020) The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces, COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019, vol. 90, br. , str. 460-476 (Proceedings Paper) 

Vorkapic Nikola M,Pjevic Milos D,Popovic Mihajlo D,Slavkovic Nikola R,Zivanovic Sasa T (2020) An additive manufacturing benchmark artifact and deviation measurement method, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 34, br. 7, str. 3015-3026 (Article) 

Zivanovic Sasa T,Popovic Mihajlo D,Vorkapic Nikola M,Pjevic Milos D,Slavkovic Nikola R (2020) An Overview of Rapid Prototyping Technologies using Subtractive, Additive and Formative Processes, FME TRANSACTIONS, vol. 48, br. 1, str. 246-253 (Article) 

Pjevic Milos D,Stojadinovic Slavenko M,Tanovic Ljubodrag M,Popovic Mihajlo D,Mladenovic Goran MO,Puzovic Radovan (2019) Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials, PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON MEASUREMENT AND QUALITY CONTROL - CYBER PHYSICAL ISSUE (IMEKO TC 14 2019), vol. , br. , str. 185-200 (Proceedings Paper) 

Pjevic Milos D,Tanovic Ljubodrag M,Mladenovic Goran MO,Markovic Biljana (2017) Experimental Examination of the Impact of Tool Radius on Specific Energy in Microcutting of Granite, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol. 139, br. 4, str. - (Article)