@ARTICLE{
author={Ivic-Nikolic Milica,Jovanovic Snezana,Nikolic Aleksandar,Djordjevic Branislav R,Sedmak Aleksandar S,Petrovic Ana S},
year={2025},
title={Some Remarks on the Basic Principles of Ultrasonic Welding of Conductors in the Automotive Industry},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={2},
pages={221-226},
document_type={Article},
} 

@ARTICLE{
author={Milosevic-Mitic Vesna O,Petrovic Ana S,Andjelic Nina M,Bogojevic Aleksandar R},
year={2025},
title={Method of Determining Non-Linear Temperature Distribution Across the Thick Plate Thickness that Simplifies Numerical Calculations},
journal={THERMAL SCIENCE},
volume={29},
number={3B},
pages={2437-2450},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Ana S,Momcilovic Nikola V,Djordjevic Branislav R,Sedmak Simon A,Andjelic Nina M,Jovicic Radomir D,Arandjelovic Mihajlo},
year={2025},
title={Inverse Iterative Methodology for Welded Joints Characterization in Construction Designing and Comparison to Classical Approach},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={22},
number={4},
pages={45-63},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Ana S,Momcilovic Nikola V,Sedmak Aleksandar S,Djordjevic Branislav R,Radu Dorin,Milosevic-Mitic Vesna O,Bogojevic Aleksandar R},
year={2025},
title={Reliability-based approach for structural integrity assessment of a bucket wheel excavator},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={136},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Petrovic Ana S,Sedmak Simon A},
year={2024},
title={Digital Image Correlation Application to Structural Integrity Assessment},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={87-91},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Nikola V,Ilic Nemanja,Kalajdzic Milan D,Ivosevic Spiro,Petrovic Ana S},
year={2024},
title={Effect of Corrosion-Induced Structural Degradation on the Ultimate Strength of a High-Tensile-Steel Ship Hull},
journal={JOURNAL OF MARINE SCIENCE AND ENGINEERING},
volume={12},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Djordjevic Branislav R,Sedmak Simon A,Radu Dorin,Petrovic Ana S,Dikic Stefan,Sedmak Aleksandar S},
year={2024},
title={Failure analysis of welded joint with multiple defects by extended Finite Element Method and Engineering Critical Analysis},
journal={ENGINEERING FAILURE ANALYSIS},
volume={160},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic-Mitic Vesna O,Petrovic Ana S,Andjelic Nina M,Jovanovic Milos Miodrag},
year={2024},
title={The Influence of Temperature Gradient on Thin Plates Bending},
journal={FME TRANSACTIONS},
volume={52},
number={1},
pages={128-135},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Aleksandar NE,Djordjevic Branislav R,Jeremic Lazar D,Sedmak Simon A,Petrovic Ana S},
year={2023},
title={Inspection of Damage and Risk Analysis of Containers in a Coal Drying Facility in Exploitation},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={111-115},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Djordje,Andjelic Nina M,Djurdjevic Andrijana A,Petrovic Ana S,Milosevic-Mitic Vesna O,Ivljanin Bojan},
year={2023},
title={Thin-Walled Omega Profile Exposed to Constrained Torsion- Analytical and Numerical Stress and Strain Calculation},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={225-229},
document_type={Article},
} 

@ARTICLE{
author={Milosevic-Mitic Vesna O,Jovanovic Milos Miodrag,Petrovic Ana S,Ivanovic Ivana B,Micovic Aleksandar S},
year={2023},
title={Influence of Specific Electrical Resistance on the Heating of Metal Plates Exposed to High Frequency Electromagnetic Waves},
journal={THERMAL SCIENCE},
volume={27},
number={5A},
pages={3649-3658},
document_type={Article},
} 

@ARTICLE{
author={Arandjelovic Mihajlo,Petrovic Ana S,Djordjevic Branislav R,Sedmak Simon A,Sedmak Aleksandar S,Dikic Stefan,Radu Dorin},
year={2023},
title={Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach},
journal={SUSTAINABILITY},
volume={15},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Djordje,Djurdjevic Andrijana A,Andjelic Nina M,Petrovic Ana S},
year={2021},
title={Numerical-Experimental Determination of Stress and Deformation State in Connection Lugs},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={2},
pages={169-172},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Sedmak Aleksandar S,Li Wei,Brzakovic Miodrag,Miljanovic Igor M,Petrovic Ana S,Sedmak Simon A},
year={2021},
title={Human factor risk management procedures applied in the case of open pit mine},
journal={ENGINEERING FAILURE ANALYSIS},
volume={126},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Ana S,Ignjatovic Dragan M,Sedmak Simon A,Milosevic-Mitic Vesna O,Momcilovic Nikola V,Trisovic Natasa R,Jeremic Lazar D},
year={2021},
title={Model analysis of bucket wheel excavator SchRs 630 strength},
journal={ENGINEERING FAILURE ANALYSIS},
volume={126},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Rajcic Boris M,Petronic Sanja Z,Colic Katarina G,Stevic Zoran M,Petrovic Ana S,Miskovic Zarko Z,Milovanovic Dubravka S},
year={2021},
title={Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration},
journal={METALS},
volume={11},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Petrovic Ana S,Sedmak Aleksandar S,Kozak Drazan V,Sedmak Simon A},
year={2020},
title={Numerical Simulation of Fatigue Crack Growth in Titanium Alloy Orthopaedic Plates},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={6},
pages={1917-1922},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Djordje,Andjelic Nina M,Maneski Tasko Dj,Milosevic-Mitic Vesna O,Petrovic Ana S,Djurdjevic Andrijana A},
year={2018},
title={Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={1676-1681},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Ana S,Maneski Tasko Dj,Ignjatovic Dragan M,Trisovic Natasa R,Grozdanovic Ines B,Li Wei},
year={2018},
title={Model analysis of complex structures - advantages of physical sub-scaled model testing and shortcomings in physical model production},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={456-460},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Ana S,Maneski Tasko Dj,Trisovic Natasa R,Ignjatovic Dragan M,Dunjic Momcilo M},
year={2018},
title={Identification of Crack Initiation Cause in Pylons Construction of the Excavator SchRs630},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={2},
pages={486-491},
document_type={Article},
} 

@ARTICLE{
author={Tatic Uros,Colic Katarina G,Sedmak Aleksandar S,Miskovic Zarko Z,Petrovic Ana S},
year={2018},
title={Evaluation of the Locking Compression Plates Stress-Strain Fields},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={1},
pages={112-117},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Branko,Petrovic Ana S,Ignjatovic Dragan M,Grozdanovic Ines B,Kozak Drazan V,Katinic Marko D},
year={2016},
title={Assessment of the Maximum Possible Extension of Bucket Wheel SchRs740 Boom Based on Static and Dynamic Calculation},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={23},
number={4},
pages={1233-1238},
document_type={Article},
} 

@ARTICLE{
author={Milosevic-Mitic Vesna O,Maneski Tasko Dj,Andjelic Nina M,Milovic Ljubica P,Petrovic Ana S,Gacesa Branka M},
year={2014},
title={Dynamic Temperature Field in the Ferromagnetic Plate Induced by Moving High Frequency Inductor},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S49-S58},
document_type={Article},
} 

@ARTICLE{
author={Gacesa Branka M,Maneski Tasko Dj,Milosevic-Mitic Vesna O,Nestorovic Miodrag S,Petrovic Ana S},
year={2014},
title={Influence of Furnace Tube Shape on Thermal Strain of Fire-Tube Boilers},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S39-S47},
document_type={Article},
}