@ARTICLE{
author={Palinkas Ivan,Desnica Eleonora Z,Pekez Jasmina,Dezso Gergely,Radovanovic Ljiljana Z},
year={2025},
title={Comparative Study of Different Software for Design Optimization},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, KOD 2024},
volume={174},
number={},
pages={655-664},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ljubojev Nadezda,Dukic-Mijatovic Marijana S,Pekez Jasmina},
year={2024},
title={Solar Energy as a Driver of Sustainable Development in Agriculture: Potential and Legal Framework for Implementation in the Republic of Serbia},
journal={EKONOMIKA POLJOPRIVREDA-ECONOMICS OF AGRICULTURE},
volume={71},
number={3},
pages={1051-1070},
document_type={Review},
} 

@ARTICLE{
author={Pekez Jasmina,Stojanov Jelena Z,Mihajlovic Visnja Dj,Marceta Una V,Radovanovic Ljiljana Z,Palinkas Ivan,Vujic Bogdana B},
year={2024},
title={The impact analysis of education on raising awareness towards climate change and energy efficiency},
journal={INTERNATIONAL JOURNAL OF TECHNOLOGY AND DESIGN EDUCATION},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Dobrilovic Dalibor,Pekez Jasmina,Ognjenovic Visnja,Desnica Eleonora Z},
year={2024},
title={Analysis of Using Machine Learning Techniques for Estimating Solar Panel Performance in Edge Sensor Devices},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dobrilovic Dalibor,Pekez Jasmina,Desnica Eleonora Z,Radovanovic Ljiljana Z,Palinkas Ivan,Mazalica Milica,Djordjevic Luka R,Mihajlovic Sinisa},
year={2023},
title={Data Acquisition for Estimating Energy-Efficient Solar-Powered Sensor Node Performance for Usage in Industrial IoT},
journal={SUSTAINABILITY},
volume={15},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Luka R,Pekez Jasmina,Novakovic Borivoj,Bakator Mihalj,Djurdjev Mica Z,Cockalo Dragan Z,Jovanovic Sasa},
year={2023},
title={Increasing Energy Efficiency of Buildings in Serbia-A Case of an Urban Neighborhood},
journal={SUSTAINABILITY},
volume={15},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jarcevic Duska,Radovanovic Ljiljana Z,Pekez Jasmina,Novakovic Borivoj,Glavas Hrvoje},
year={2023},
title={The Influence of Preventive Maintenance of Batteries on Increasing the Security of the Thermal Power System},
journal={31ST INTERNATIONAL CONFERENCE ON ORGANIZATION AND TECHNOLOGY OF MAINTENANCE (OTO 2022)},
volume={592},
number={},
pages={96-105},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Palinkas Ivan,Pekez Jasmina,Desnica Eleonora Z,Rajic Aleksandar A,Nedelcu Dorian},
year={2021},
title={Analysis and Optimization of UAV Frame Design for Manufacturing from Thermoplastic Materials on FDM 3D Printer},
journal={MATERIALE PLASTICE},
volume={58},
number={4},
pages={238-249},
document_type={Article},
} 

@ARTICLE{
author={Otic Goran,Momcilovic Oliver,Radovanovic Ljiljana Z,Jovanov Goran,Radosav Dragica,Pekez Jasmina},
year={2021},
title={Mathematical Analysis of Criteria for Maintenance of Technical Systems in the Function of Achieving Sustainability},
journal={SUSTAINABILITY},
volume={13},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ljubojev Nadezda,Pekez Jasmina,Radovanovic Ljiljana Z},
year={2018},
title={Wind energy in Serbia: Harmonization with the legislation of the European Union},
journal={ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY},
volume={13},
number={9-10},
pages={375-382},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Miodrag,Lambic Miroslav R,Radovanovic Ljiljana Z,Pekez Jasmina,Ilic Dragoljub,Nikolic Nikola,Kucora Istvan},
year={2017},
title={Increasing the efficiency by retrofitting gas boilers into a condensing heat exchanger},
journal={ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY},
volume={12},
number={5},
pages={470-479},
document_type={Article},
} 

@ARTICLE{
author={Pekez Jasmina,Radovanovic Ljiljana Z,Desnica Eleonora Z,Lambic Miroslav R},
year={2016},
title={The increase of exploitability of renewable energy sources},
journal={ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY},
volume={11},
number={1},
pages={51-57},
document_type={Article},
} 

@ARTICLE{
author={Brkovic Marija,Radovanovic Ljiljana Z,Desnica Eleonora Z,Pekez Jasmina,Adamovic Zivoslav Z},
year={2015},
title={Analysis of Loss Reduction in Natural Gas Transportation and Distribution},
journal={ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY},
volume={10},
number={2},
pages={214-222},
document_type={Article},
} 

@ARTICLE{
author={Pekez Jasmina,Lambic Miroslav R,Stojadinovic Slobodan},
year={2013},
title={Materials for Flat Plat Solar Collectors},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={2},
pages={77-80},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Pekez Jasmina,Bajic Nikola S},
year={2012},
title={The analysis of hardening of metal materials Structural level of deformation and parameters of thermomechanical treatment},
journal={JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
volume={110},
number={1},
pages={461-463},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Pekez Jasmina,Bajic Nikola S},
year={2012},
title={The Analysis of the Impact of Mg2Si Phase, Free Si and Si/Mg Relation on the Characteristics of Almgsi0,5 Alloys},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={9},
pages={35-37},
document_type={Article},
} 

@ARTICLE{
author={Pekez Jasmina,Lambic Miroslav R,Stojadinovic Slobodan,Vujicin Kristijan},
year={2012},
title={Energy Characteristics Degradation of Polymer Transparents Cover},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={6},
pages={47-49},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Pekez Jasmina,Bajic Nikola S},
year={2012},
title={The Analysis of the Effects of the Chemical Composition and the Thermomechanical Treatment on the Characteristics of the Extruded AlMgSi Profiles},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={6},
pages={5-7},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Pekez Jasmina,Bajic Nikola S},
year={2012},
title={The Analysis of Similarities and Differences in the Process of Carbon Steels and Almgsi Alloys Hardening},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={4},
pages={70-72},
document_type={Article},
} 

@ARTICLE{
author={Trifkovic Slobodan,Pavlovic Milan D,Radovanovic Ljiljana Z,Pekez Jasmina,Desnica Eleonora Z},
year={2011},
title={Analysis of projection of quantity medical waste generation in dependence on influencing factors},
journal={HEALTHMED},
volume={5},
number={4},
pages={985-989},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Bajic Nikola S,Pekez Jasmina},
year={2011},
title={MICRO ALLOYED STEEL WELDABILITY AND SENSIBILITY TESTING ON THE LAMELLAR CRACKS APPEARANCE},
journal={METALURGIJA},
volume={50},
number={3},
pages={189-192},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slobodan,Bajic Nikola S,Pekez Jasmina},
year={2010},
title={Micro alloyed steels weldability and sensibility testing on the cold and hot cracking appearance},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={5},
number={1},
pages={218-225},
document_type={Article},
}