@ARTICLE{
author={Arsic Dusan M,Nikolic Ruzica R,Arsic Aleksandra M,Cvetkovic Dragan Z,Bokuvka Otakar,Mandic Vesna M},
year={2026},
title={Root Cause Assessment of Welded Satellite Gear Carrier Failure in a Bucket Wheel Excavator},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={32},
number={2},
pages={230-240},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Bokuvka Otakar,Pastorkova Jana},
year={2026},
title={Influence of the window roller shutters on the room temperature in residential buildings in Serbia},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={32},
number={1},
pages={11-20},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Arsic Dusan M,Nikolic Ruzica R,Delic Marko,Jovanovic-Pesic Zivana M,Mandic Vesna M,Pastorkova Jana},
year={2025},
title={Experimental and Numerical Analysis of Rotary Friction Welding for Al-Cu Joints: Effects of Friction Time on Plastic Deformation and Joint Integrity},
journal={MATERIALS},
volume={18},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Nenad DR,Kostic Nenad D,Marjanovic Nenad J,Nikolic Ruzica R,Ulewicz Robert},
year={2025},
title={Assessing the Influence of Cardinality Constraints on the Simultaneous Optimization of Truss Sizing, Shape, and Topology},
journal={MATERIALS},
volume={18},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Nikolic Ruzica R,Arsic Aleksandra M,Cvetkovic Dragan Z,Pastorkova Jana,Bokuvka Otakar},
year={2025},
title={Measures to prevent damage and to extent the service life of a rotary excavator},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={31},
number={1},
pages={73-80},
document_type={Article},
} 

@ARTICLE{
author={Kostic Nenad D,Petrovic Nenad DR,Marjanovic Vesna,Nikolic Ruzica R,Szmidla Janusz,Marjanovic Nenad J,Ulewicz Robert},
year={2024},
title={Effects of Limiting the Number of Different Cross-Sections Used in Statically Loaded Truss Sizing and Shape Optimization},
journal={MATERIALS},
volume={17},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Pastorkova Jana,Ulewicz Robert},
year={2023},
title={Prediction of the Crack Front Shape of the Corner Interface Crack},
journal={APPLIED SCIENCES-BASEL},
volume={13},
number={23},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Prokic-Cvetkovic Radica,Popovic Olivera D,Nikolic Ruzica R,Bokuvka Otakar},
year={2023},
title={How to replace the original material for the welded structure manufacturing},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={29},
number={4},
pages={369-378},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan T,Aleksandrovic Srbislav M,Arsic Dusan M,Nikolic Ruzica R,Szmidla Janusz,Todic Aleksandar,Cukanovic Dragan V,Ulewicz Robert},
year={2023},
title={Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets},
journal={MATERIALS},
volume={16},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Ivkovic Djordje,Ulewicz Robert,Bokuvka Otakar},
year={2022},
title={Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions},
journal={MATERIALS},
volume={15},
number={21},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kandeva Mara,Zagorski Mihail,Nikolic Ruzica R,Stojanovic Blaza Z,But Adrian,Botko Frantisek,Pitel Jan,Vencl Aleksandar A},
year={2022},
title={Friction Properties of the Heat-Treated Electroless Ni Coatings Embedded with c-BN Nanoparticles},
journal={COATINGS},
volume={12},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Sczygiol Norbert,Krstic Bozidar V,Ivkovic Djordje,Hadzima Branislav,Pastorek Filip,Ulewicz Robert},
year={2022},
title={Weldability Assessment of Various Steels by Hard-Facing},
journal={MATERIALS},
volume={15},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Bujnak Jan,Hadzima Branislav,Pastorek Filip,Dwornicka Renata,Ulewicz Robert},
year={2022},
title={Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia},
journal={ENERGIES},
volume={15},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Markovic Svetislav Lj,Arsic Dusan M,Lazic Vukic N,Hadzima Branislav,Ulewicz Robert},
year={2021},
title={Influence of different hard-facing procedures on quality of surfaces of regenerated gears},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={27},
number={4},
pages={257-264},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Arsic Dusan M,Nikolic Ruzica R,Lazic Vukic N,Hadzima Branislav,Milovanovic Vladimir P,Dwornicka Renata,Ulewicz Robert},
year={2021},
title={Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures},
journal={MATERIALS},
volume={14},
number={15},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kalinovic Sasa M,Tanikic Dejan I,Djokovic Jelena M,Nikolic Ruzica R,Hadzima Branislav,Ulewicz Robert},
year={2021},
title={Optimal Solution for an Energy Efficient Construction of a Ventilated Facade Obtained by a Genetic Algorithm},
journal={ENERGIES},
volume={14},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Arsic Dusan M,Nikolic Ruzica R,Lazic Vukic N,Ratkovic Nada R,Hadzima Branislav,Szmidla Janusz,Ulewicz Robert},
year={2021},
title={Analysis of the Welding Type and Filler Metal Influence on Performance of a Regenerated Gear},
journal={MATERIALS},
volume={14},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kalinovic Sasa M,Djokovic Jelena M,Nikolic Ruzica R,Hadzima Branislav},
year={2020},
title={Thermal fracture characteristics of an interface crack subjected to temperature variations},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={26},
number={2},
pages={54-59},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Djokovic Jelena M,Hadzima Branislav,Ulewicz Robert},
year={2020},
title={Spot-Weld Service Life Estimate Based on Application of the Interfacial Crack Concept dagger},
journal={MATERIALS},
volume={13},
number={13},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ilic Andreja,Miletic Ivan M,Nikolic Ruzica R,Marjanovic Vesna,Ulewicz Robert,Stojanovic Blaza Z,Ivanovic Lozica T},
year={2020},
title={Analysis of Influence of the Welding Procedure on Impact Toughness of Welded Joints of the High-Strength Low-Alloyed Steels},
journal={APPLIED SCIENCES-BASEL},
volume={10},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Miletic Ivan M,Ilic Andreja,Nikolic Ruzica R,Ulewicz Robert,Ivanovic Lozica T,Sczygiol Norbert},
year={2020},
title={Analysis of Selected Properties of Welded Joints of the HSLA Steels},
journal={MATERIALS},
volume={13},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Bujnak Jan,Hadzima Branislav,Tomic Radoljub P},
year={2020},
title={Some Aspects of the Three-Dimensional Interface Cracks Analysis},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={1},
pages={1-4},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Ulewicz Robert,Hadzima Branislav},
year={2020},
title={Interface Crack Approaching a Three-Material Joint},
journal={APPLIED SCIENCES-BASEL},
volume={10},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mesko Jozef,Zrak Andrej,Nigrovic Rastislav,Nikolic Ruzica R},
year={2018},
title={The Effect of Selected Technological Parameters of Laser Cutting on the Cut Surface Roughness},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={4},
pages={997-1003},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Prokic-Cvetkovic Radica,Popovic Olivera D},
year={2018},
title={Microstructure in the joining zone during the friction welding of the two dissimilar steels},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={70},
number={2},
pages={401-407},
document_type={Article},
} 

@ARTICLE{
author={Miloradovic Nenad A,Stojanovic Blaza Z,Nikolic Ruzica R,Gubeljak Nenad},
year={2018},
title={Analysis of wear properties of Zn-based composites using the Taguchi method},
journal={MATERIALS TESTING},
volume={60},
number={3},
pages={265-272},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan,Mandic Vesna M,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Gulisija Zvonko P},
year={2017},
title={Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={69},
number={4},
pages={464-470},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Sumarac Dragoslav M,Bujnak Jan},
year={2016},
title={Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface},
journal={INTERNATIONAL JOURNAL OF DAMAGE MECHANICS},
volume={25},
number={8},
pages={1170-1183},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan,Arsic Dusan M,Aleksandrovic Srbislav M,Lazic Vukic N,Milosavljevic Dragan I,Nikolic Ruzica R,Mladenovic V},
year={2016},
title={Comparative Study of An Environmentally Friendly Lubricant with Conventional Lubricants in Strip Ironing Test},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1A},
pages={959-970},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Samardzic Ivan,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav},
year={2015},
title={Impact of the Hard Facing Technology and the Filler Metal on Tribological Characteristics of the Hard Faced Forging Dies},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={5},
pages={1353-1358},
document_type={Article},
} 

@ARTICLE{
author={Catic Dobrivoje M,Nikolic Ruzica R,Glisovic Jasna D},
year={2015},
title={Numerical determination of reliability in probabilistic design},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={229},
number={16},
pages={2868-2874},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Nikolic Ruzica R,Mutavdzic Milan,Aleksandrovic Srbislav M,Krstic Bozidar V,Milosavljevic Dragan I},
year={2015},
title={Selection of the Most Appropriate Welding Technology for Hardfacing of Bucket Teeth},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={1},
pages={165-172},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Zivkovic Katarina Z},
year={2014},
title={Interfacial Crack Behavior in the Stationary Temperature Field Conditions},
journal={THERMAL SCIENCE},
volume={18},
number={},
pages={S169-S178},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Nikolic Ruzica R,Samardzic Ivan},
year={2014},
title={Structural, Chemical and Deformation Changes in Friction Welded Joint of Dissimilar Steels},
journal={METALURGIJA},
volume={53},
number={4},
pages={513-516},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Miletic Ivan M,Micunovic Milan V},
year={2014},
title={Analysis of the Lefm Concept for Interfacial Cracks Application to Coating Buckling Delamination in Terms of Substrate Elastic Characteristics},
journal={JOURNAL OF THEORETICAL AND APPLIED MECHANICS},
volume={52},
number={1},
pages={61-69},
document_type={Article},
} 

@ARTICLE{
author={Bojic Nada V,Nikolic Ruzica R,Jugovic Branimir Z,Jugovic Zvonimir S,Gvozdenovic Milica M},
year={2013},
title={Uniaxial tension of drying sieves},
journal={HEMIJSKA INDUSTRIJA},
volume={67},
number={4},
pages={655-662},
document_type={Article},
} 

@ARTICLE{
author={Savkovic Mile M,Gasic Milomir M,Catic Dobrivoje M,Nikolic Ruzica R,Pavlovic Goran V},
year={2013},
title={Optimization of the box section of the main girder of the bridge crane with the rail placed above the web plate},
journal={STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION},
volume={47},
number={2},
pages={273-288},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Milosavljevic Dragan I,Nikolic Ilija Z,Aleksandrovic Srbislav M,Nikolic Ruzica R,Mutavdzic Milan},
year={2012},
title={Theoretical and Experimental Estimation of the Working Life of Machine Parts Hard Faced with Austenite-Manganese Electrodes},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={5},
pages={547-554},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Djokovic Jelena M},
year={2012},
title={The LEFM Concept for Interfacial Cracks Application to the Problem of Coating Delamination on Cylindrical Substrates},
journal={JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME},
volume={79},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Aleksandrovic Srbislav M,Stefanovic Milentije C,Adamovic Dragan D,Lazic Vukic N,Babic Miroslav J,Nikolic Ruzica R,Vujinovic Tomislav},
year={2011},
title={Variable Tribological Conditions on the Flange and Nonmonotonous Forming in Deep Drawing of Coated Sheets},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={17},
number={2},
pages={165-178},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Dzindo Emina S,Catic Dobrivoje M},
year={2011},
title={Estimate of a Power Distributor Life Span Based on the Fracture Mechanics Criteria},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={18},
number={1},
pages={103-108},
document_type={Article},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Tadic Srdjan S},
year={2010},
title={Influence of Temperature on Behavior of the Interfacial Crack Between the Two Layers},
journal={THERMAL SCIENCE},
volume={14},
number={},
pages={S259-S268},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Djokovic Jelena M,Micunovic Milan V},
year={2010},
title={The competition between the crack kinking away from the interface and crack propagation along the interface in elastic bicrystals},
journal={INTERNATIONAL JOURNAL OF FRACTURE},
volume={164},
number={1},
pages={73-82},
document_type={Article},
} 

@ARTICLE{
author={Nedeljkovic Branislav D,Babic Miroslav J,Mutavdzic Milan,Ratkovic Nada R,Aleksandrovic Srbislav M,Nikolic Ruzica R,Lazic Vukic N},
year={2010},
title={Reparatory Hard Facing Of The Rotational Device Knives For Terrain Levelling},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={1},
pages={46-57},
document_type={Article},
} 

@ARTICLE{
author={Krstic Bozidar V,Lazic Vukic N,Nikolic Ruzica R,Raicevic Vladimir N,Jovanovic V,Krstic I},
year={2009},
title={Optimal Strategy For Preventive Maintenance Of The Motor Vehicles Clutch},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={15},
number={4},
pages={611-619},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Sedmak Aleksandar S,Jovanovic Milorad D,Lazic Vukic N,Nikolic Ruzica R,Krstic Bozidar V},
year={2009},
title={Physical And Metallurgic Changes During The Friction Welding Of High-speed Cutting Steel And Tempered Steel},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={3},
pages={27-31},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Sedmak Aleksandar S,Jovanovic Milorad D,Lazic Vukic N,Nikolic Ruzica R,Krstic Bozidar V},
year={2009},
title={Quality Analysis Of Ai-cu Joint Realized By Friction Welding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={3},
pages={3-7},
document_type={Article},
}