@ARTICLE{
author={Giljen Zdravko,Nedeljkovic Milos SR,Cheng Yongguang},
year={2024},
title={The Influence of Pump-Turbine Specific Speed on Hydraulic Transient Processes},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={70},
number={5-6},
pages={231-246},
document_type={Article},
} 

@ARTICLE{
author={Giljen Zdravko,Nedeljkovic Milos SR},
year={2023},
title={Universal Form of Radial Hydraulic Machinery Four-Quadrant Equations for Calculation of Transient Processes},
journal={ENERGIES},
volume={16},
number={23},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Petrovic Petar B,Nedeljkovic Milos SR,Legrady David},
year={2022},
title={Automatic Edge Detection Applied to Cavitating Flow Analysis: Cavitation Cloud Dynamics and Properties Measured through Detected Image Regions},
journal={FLOW TURBULENCE AND COMBUSTION},
volume={108},
number={3},
pages={865-893},
document_type={Article},
} 

@ARTICLE{
author={Matijevic Milan S,Nedeljkovic Milos SR},
year={2020},
title={Design and Use of Digitally Controlled Electric Motors for Purpose of Engineering Education},
journal={CHALLENGES OF THE DIGITAL TRANSFORMATION IN EDUCATION, ICL2018, VOL 1},
volume={916},
number={},
pages={833-844},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin,Nedeljkovic Milos SR,Czifrus Szabolcs},
year={2020},
title={Study and Analysis of the Cavitating and Non-Cavitating Jets Part Two Parameters Controlling the Jet Action and a New Formula for Cavitation Number Calculation},
journal={THERMAL SCIENCE},
volume={24},
number={1},
pages={407-419},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin,Nedeljkovic Milos SR,Czifrus Szabolcs},
year={2020},
title={Study and Analysis of the Cavitating and Non-Cavitating Jets Part One Parameters Controlling Force, Power, and the Jet Behavior},
journal={THERMAL SCIENCE},
volume={24},
number={1},
pages={393-406},
document_type={Article},
} 

@ARTICLE{
author={Giljen Z,Nedeljkovic Milos SR},
year={2019},
title={Radial hydraulic machinery four-quadrant performance curves dependent on specific speed and applied in transient calculations},
journal={29TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS},
volume={240},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Fekete Tamas,Nedeljkovic Milos SR},
year={2019},
title={Surface characteristics and cavitation damage progress in ductile materials},
journal={ENGINEERING FAILURE ANALYSIS},
volume={106},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Cantrak Djordje S,Jankovic Novica Z,Nedeljkovic Milos SR,Matijevic Milan S,Ilic Dejan BO},
year={2019},
title={Lectures in Rotodynamic Pumps-From Design and Simulations to Testing},
journal={MOBILE TECHNOLOGIES AND APPLICATIONS FOR THE INTERNET OF THINGS},
volume={909},
number={},
pages={394-406},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Matijevic Milan S,Nedeljkovic Milos SR,Cantrak Djordje S,Jankovic Novica Z},
year={2019},
title={Problem-Oriented Learning Based on Use of Shared Experimental Results},
journal={MOBILE TECHNOLOGIES AND APPLICATIONS FOR THE INTERNET OF THINGS},
volume={909},
number={},
pages={47-58},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila},
year={2019},
title={Dynamic behaviour of cavitation clouds: visualization and statistical analysis},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={41},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nedeljkovic Milos SR,Cantrak Djordje S,Jankovic Novica Z,Ilic Dejan BO,Matijevic Milan S},
year={2019},
title={Virtual Instrumentation Used in Engineering Education Set-Up of Hydraulic Pump and System},
journal={SMART INDUSTRY & SMART EDUCATION},
volume={47},
number={},
pages={686-693},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Petar B,Nedeljkovic Milos SR},
year={2019},
title={Activities of Euro-CASE Engineering Education Platform},
journal={SMART INDUSTRY & SMART EDUCATION},
volume={47},
number={},
pages={678-685},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Nedeljkovic Milos SR,Jankovic Novica Z,Cantrak Djordje S,Ilic Dejan BO,Matijevic Milan S},
year={2019},
title={Poster: Remote Engineering Education Set-Up of Hydraulic Pump and System},
journal={SMART INDUSTRY & SMART EDUCATION},
volume={47},
number={},
pages={304-311},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila},
year={2018},
title={Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet},
journal={APPLIED SURFACE SCIENCE},
volume={458},
number={},
pages={293-304},
document_type={Article},
} 

@ARTICLE{
author={Veljovic Aleksandra,Matijevic Milan S,Nedeljkovic Milos SR,Cantrak Djordje S},
year={2018},
title={An approach to design of the cyber-physical systems for engineering-education},
journal={PROCEEDINGS OF 2018 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON) - EMERGING TRENDS AND CHALLENGES OF ENGINEERING EDUCATION},
volume={},
number={},
pages={1402-1407},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Nedeljkovic Milos SR,Jankovic Novica Z,Cantrak Djordje S,Ilic Dejan BO,Matijevic Milan S},
year={2018},
title={Engineering Education Lab Setup Ready for Remote Operation - Pump System Hydraulic Performance},
journal={PROCEEDINGS OF 2018 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON) - EMERGING TRENDS AND CHALLENGES OF ENGINEERING EDUCATION},
volume={},
number={},
pages={1169-1176},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Nedeljkovic Milos SR,Cantrak Djordje S,Jankovic Novica Z,Ilic Dejan BO,Matijevic Milan S},
year={2018},
title={Virtual Instruments and Experiments in Engineering education Lab Setup with Hydraulic Pump},
journal={PROCEEDINGS OF 2018 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON) - EMERGING TRENDS AND CHALLENGES OF ENGINEERING EDUCATION},
volume={},
number={},
pages={1139-1146},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila},
year={2018},
title={Cavitating flow characteristics, cavity potential and kinetic energy, void fraction and geometrical parameters - Analytical and theoretical study validated by experimental investigations},
journal={INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER},
volume={117},
number={},
pages={873-886},
document_type={Article},
} 

@ARTICLE{
author={Matijevic Milan S,Jovic Nikola D,Nedeljkovic Milos SR,Cantrak Djordje S},
year={2017},
title={Remote Labs and Problem Oriented Engineering Education},
journal={PROCEEDINGS OF 2017 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON2017)},
volume={},
number={},
pages={1391-1396},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila,Legrady David},
year={2017},
title={Experimental study on the influence of geometrical parameters on the cavitation erosion characteristics of high speed submerged jets},
journal={EXPERIMENTAL THERMAL AND FLUID SCIENCE},
volume={80},
number={},
pages={281-292},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Bonyar Attila,Radovic Nenad A,Llic Vojislav,Debeljkovic Aleksandra D},
year={2016},
title={The ability of using the cavitation phenomenon as a tool to modify the surface characteristics in micro- and in nano-level},
journal={TRIBOLOGY INTERNATIONAL},
volume={101},
number={},
pages={88-97},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A,Bonyar Attila},
year={2016},
title={The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process},
journal={INTERNATIONAL JOURNAL OF MULTIPHASE FLOW},
volume={83},
number={},
pages={27-38},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Bonyar Attila,Oszetzky Daniel,Nedeljkovic Milos SR},
year={2016},
title={Plastic deformation and modification of surface characteristics in nano- and micro-levels and enhancement of electric field of FCC materials using cavitation phenomenon},
journal={MECHANICS OF MATERIALS},
volume={92},
number={},
pages={289-298},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Alteash Omer,Ben Raghisa Mostafa,Nedeljkovic Milos SR,Ilic Vojislav},
year={2013},
title={Appearance of High Submerged Cavitating Jet: the Cavitation Phenomenon and Sono-Luminescence},
journal={THERMAL SCIENCE},
volume={17},
number={4},
pages={1151-1161},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Abouali Salem,Ben Hucine Mohamed,Mansour Mohamed,Nedeljkovic Milos SR,Ilic Vojislav},
year={2013},
title={Influence of Hydrodynamic Conditions and Nozzle Geometry on Appearance of High Submerged Cavitating Jets},
journal={THERMAL SCIENCE},
volume={17},
number={4},
pages={1139-1149},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A},
year={2013},
title={Nano- and Micro-Scale Surface Modification of FCC Metal Using High Submerged Cavitating Water Jet},
journal={PLASMONICS},
volume={8},
number={2},
pages={843-849},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Ilic Vojislav},
year={2012},
title={An Experimental Investigation of Cavitating Jet Dynamic Power and Cavitation Intensity},
journal={PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B},
volume={},
number={},
pages={343-351},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Protic Zoran D,Nedeljkovic Milos SR,Cantrak Djordje S,Jankovic Novica Z},
year={2010},
title={Novel Methods for Axial Fan Impeller Geometry Analysis and Experimental Investigations of the Generated Swirl Turbulent Flow},
journal={THERMAL SCIENCE},
volume={14},
number={},
pages={S125-S139},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR,Radovic Nenad A},
year={2008},
title={Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion},
journal={ARCHIVE OF APPLIED MECHANICS},
volume={78},
number={5},
pages={329-341},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR},
year={2008},
title={Frequency in Shedding/Discharging cavitation clouds determined by visualization of a submerged cavitating jet},
journal={JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME},
volume={130},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Hutli Ezddin Ali Farag,Nedeljkovic Milos SR},
year={2007},
title={Formula for upstream pressure, nozzle geometry and frequency correlation in shedding/discharging cavitation clouds determined by visualization of submerged cavitating jet},
journal={NEW TRENDS IN FLUID MECHANICS RESEARCH - PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLUID MECHANICS},
volume={},
number={},
pages={194-197},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Nedeljkovic Milos SR,Protic Zoran D,Benisek Miroslav H},
year={2001},
title={Rotational number as criterion for definition of inlet diameter of radial fan impellers},
journal={ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK},
volume={81},
number={},
pages={S931-S932},
document_type={Article},
} 

@ARTICLE{
author={Cantrak Svetislav M,Benisek Miroslav H,Nedeljkovic Milos SR,Lecic Milan R},
year={2001},
title={Problems of non-local turbulent transfer modelling},
journal={ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK},
volume={81},
number={},
pages={S913-S914},
document_type={Article},
} 

@ARTICLE{
author={Benisek Miroslav H,Nedeljkovic Milos SR,Cantrak Svetislav M,Anicin S},
year={2001},
title={Investigation of the swirling flow characteristics in a conical diffuser},
journal={ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK},
volume={81},
number={},
pages={S907-S908},
document_type={Article},
}