@ARTICLE{
author={Avoni G,...,Mladenovic Goran MO,...,(broj koautora 32)},
year={2025},
title={Upgrades of the ATLAS zero degree calorimeter system for Run 3 at the Large Hadron Collider},
journal={JOURNAL OF INSTRUMENTATION},
volume={20},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Ivana M,Stojanovic Jagos M,Milovanovic Aleksa Lj,Trajkovic Isaak D,Milosevic Milos S,Mladenovic Goran MO},
year={2024},
title={Printing Orientation and Place Influencing the Compressive Strength of Polyamid 12 Specimens Obtained by Sls Technology},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={3-7},
document_type={Article},
} 

@ARTICLE{
author={Aad G,...,Bakos Evelin,...,Beemster Laurentius Jacobus,...,Bogavac Danijela,...,Dimitrievska A,...,Jovicevic J,...,Maksimovic Veljko,...,Mamuzic Judita,...,Marjanovic M,...,Mladenovic Goran MO,...,Sijacki Djordje,...,Vranjes Nenad,Vranjes-Milosavljevic Marija,...,Zivkovic L,...,(broj koautora 3440)},
year={2024},
title={The ATLAS experiment at the CERN Large Hadron Collider: a description of the detector configuration for Run 3},
journal={JOURNAL OF INSTRUMENTATION},
volume={19},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Ivana M,Mladenovic Goran MO,Milovanovic Aleksa Lj,Trajkovic Isaak D,Djurkovic Marija,Korolija Nenad,Milosevic Milos S},
year={2024},
title={The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS},
journal={SCIENCE OF SINTERING},
volume={56},
number={1},
pages={45-57},
document_type={Article},
} 

@ARTICLE{
author={Trajkovic Isaak D,Dragicevic Aleksandra D,Medojevic Ivana,Mladenovic Goran MO,Milosevic Milos S},
year={2023},
title={The influence of material infill on ABS-X flexural strength},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5577-5581},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Ivana M,Golubovic Zorana Z,Mladenovic Goran MO,Berto Filippo,Sedmak Aleksandar S,Milovanovic Aleksa Lj,Milosevic Milos S},
year={2023},
title={Printing orientation influence on tensile strength of PA12 specimens obtained by SLS},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5549-5554},
document_type={Article},
} 

@ARTICLE{
author={Nozka Libor,...,Mladenovic Goran MO,...,(broj koautora 21)},
year={2023},
title={Upgraded Cherenkov time-of-flight detector for the AFP project},
journal={OPTICS EXPRESS},
volume={31},
number={3},
pages={3998-4014},
document_type={Article},
} 

@ARTICLE{
author={Popovic Mihajlo D,Pjevic Milos D,Milovanovic Aleksa Lj,Mladenovic Goran MO,Milosevic Milos S},
year={2023},
title={Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={2},
pages={697-706},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Ivana M,Mladenovic Goran MO,Milosevic Milos S,Milovanovic Aleksa Lj,Trajkovic Isaak D,Travica Milan N},
year={2022},
title={Dimensional Accuracy of Parts Obtained by Sls Technology},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={3},
pages={288-292},
document_type={Article},
} 

@ARTICLE{
author={Trajkovic Isaak D,Milosevic Milos S,Travica Milan N,Rakin Marko P,Mladenovic Goran MO,Kudrjavceva Ljudmila T,Medjo Bojan I},
year={2022},
title={Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens},
journal={SCIENCE OF SINTERING},
volume={54},
number={3},
pages={373-386},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Milos S,Trajkovic Isaak D,Golubovic Zorana Z,Ivanov Toni D,Mladenovic Goran MO,Milovanovic Aleksa Lj,Mitrovic Nenad R},
year={2022},
title={Development of methodologies for experimental analysis of neck deformations caused by impact forces in martial arts},
journal={ADVANCES IN MECHANICAL ENGINEERING},
volume={14},
number={8},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Postic Srdjan D,Milosevic Milos S,Maneski Tasko Dj,Mladenovic Goran MO,Brkovic Snezana V,Trifkovic Branka V},
year={2022},
title={Optical stereometric analysis of an experimental partially-edentulous mandible},
journal={ADVANCES IN MECHANICAL ENGINEERING},
volume={14},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mihailovic Vladislava,Miric-Milosavljevic Mira,Djurkovic Marija,Mladenovic Goran MO,Milosevic Milos S,Trajkovic Isaak D},
year={2022},
title={Loading Rate Effects on MOE and MOR Distributions in Testing of Small Clear Beech Wood Specimens},
journal={BIORESOURCES},
volume={17},
number={1},
pages={1818-1835},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Nenad Z,Sedmak Aleksandar S,Bakic Gordana M,Lazic Vukic N,Milosevic Milos S,Mladenovic Goran MO,Maslarevic Aleksandar M},
year={2021},
title={Determination of the Actual Stress-Strain Diagram for Undermatching Welded Joint Using DIC and FEM},
journal={MATERIALS},
volume={14},
number={16},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Golubovic Zorana Z,Mladenovic Goran MO,Colic Katarina G,Milosevic Milos S},
year={2020},
title={Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1963-1968},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mladenovic Goran MO,Milovanovic Marko,Tanovic Ljubodrag M,Puzovic Radovan,Pjevic Milos D,Popovic Mihajlo D,Stojadinovic Slavenko M},
year={2020},
title={The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={460-476},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Zivkovic Jelena,Djordjevic Milan Lj,Mladenovic Goran MO},
year={2020},
title={Effect of Elevated Temperatures on Mechanical Properties of Ultra High Strength Hot Work Tool Steel H11},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={2},
pages={71-82},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Milosevic Milos S,Mladenovic Goran MO,Likozar Blaz,Colic Katarina G,Mitrovic Nenad R},
year={2019},
title={Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={84-95},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Pjevic Milos D,Stojadinovic Slavenko M,Tanovic Ljubodrag M,Popovic Mihajlo D,Mladenovic Goran MO,Puzovic Radovan},
year={2019},
title={Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials},
journal={PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON MEASUREMENT AND QUALITY CONTROL - CYBER PHYSICAL ISSUE (IMEKO TC 14 2019)},
volume={},
number={},
pages={185-200},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kovacevic Tihomir M,Rusmirovic Jelena D,Tomic Natasa Z,Mladenovic Goran MO,Milosevic Milos S,Mitrovic Nenad R,Marinkovic Aleksandar D},
year={2019},
title={Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites},
journal={POLYMER COMPOSITES},
volume={40},
number={3},
pages={1170-1186},
document_type={Article},
} 

@ARTICLE{
author={Djurkovic Marija,Mladenovic Goran MO,Tanovic Ljubodrag M,Danon Gradimir J},
year={2018},
title={Impact of Feed Rate, Milling Depth and Tool Rake Angle in Peripheral Milling of Oak Wood on the Cutting Force},
journal={MADERAS-CIENCIA Y TECNOLOGIA},
volume={20},
number={1},
pages={25-34},
document_type={Article},
} 

@ARTICLE{
author={Pjevic Milos D,Tanovic Ljubodrag M,Mladenovic Goran MO,Markovic Biljana},
year={2017},
title={Experimental Examination of the Impact of Tool Radius on Specific Energy in Microcutting of Granite},
journal={JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME},
volume={139},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mladenovic Goran MO,Bojanic Pavao,Tanovic Ljubodrag M,Klimenko Sergey A},
year={2015},
title={Experimental Investigation of Microcutting Mechanisms in Oxide Ceramic CM332 Grinding},
journal={JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME},
volume={137},
number={3},
pages={-},
document_type={Article},
}