@ARTICLE{
author={Vukelic Djordje B,Milosevic Aleksandar D,Simunovic Goran,Ivanov Vitalii,Santosi Zeljko Dj,Sokac Mario Z,Mitrovic Slobodan R},
year={2026},
title={Investigating the Influence of Cutting Insert Angles on Dimensional Deviation and Surface Roughness During Turning of Ti6Al4V Alloy},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={33},
number={3},
pages={1272-1281},
document_type={Article},
} 

@ARTICLE{
author={Stefanovic Miladin Z,Wawak Slawomir,Popkova Elena,Eric Milan D,Mitrovic Slobodan R,Djordjevic Aleksandar MI,Zahar-Djordjevic Marija},
year={2024},
title={From Quality 4.0 to Quality 5.0- the Transition Roadmap},
journal={INTERNATIONAL JOURNAL FOR QUALITY RESEARCH},
volume={18},
number={4},
pages={1199-1210},
document_type={Article},
} 

@ARTICLE{
author={Milojevic Sasa T,Savic Slobodan R,Mitrovic Slobodan R,Maric Dejan,Krstic Bozidar V,Stojanovic Blaza Z,Popovic Vladimir M},
year={2023},
title={Solving the Problem of Friction and Wear in Auxiliary Devices of Internal Combustion Engines on the Example of Reciprocating Air Compressor for Vehicles},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={30},
number={1},
pages={122-130},
document_type={Article},
} 

@ARTICLE{
author={Brzakovic Ljiljana,Kocovic Vladimir,Mitrovic Slobodan R,Busarac Nina,Tadic Branko U},
year={2022},
title={A Method for Determination of Kinetic Friction Coefficient Under Dynamic Loading Conditions},
journal={ROMANIAN JOURNAL OF PHYSICS},
volume={67},
number={9-10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Brzakovic Ljiljana,Kocovic Vladimir,Mitrovic Slobodan R,Busarac Nina,Tadic Branko U},
year={2022},
title={A Method for Determination of Kinetic Friction Coefficient Under Dynamic Loading Conditions},
journal={ROMANIAN JOURNAL OF PHYSICS},
volume={67},
number={9-10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Brzakovic Ljiljana,Kocovic Vladimir,Mitrovic Slobodan R,Busarac Nina,Tadic Branko U},
year={2022},
title={A Method for Determination of Kinetic Friction Coefficient Under Dynamic Loading Conditions},
journal={ROMANIAN JOURNAL OF PHYSICS},
volume={67},
number={9-10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Marko,Dzunic Dragan S,Valasek Petr,Mitrovic Slobodan R,Ruggiero Alessandro},
year={2022},
title={Effect of Fiber Orientation on the Tribological Performance of Abaca-Reinforced Epoxy Composite under Dry Contact Conditions},
journal={JOURNAL OF COMPOSITES SCIENCE},
volume={6},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Adamovic Dragan D,Mitrovic Slobodan R,Grujovic Nenad N,Tanaskovic Jovan D,Stojadinovic Ivan B},
year={2022},
title={Influence of different environments on the sliding friction of Ultra-high-molecular-weight polyethylene (UHMWPE)},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY},
volume={236},
number={10},
pages={2004-2012},
document_type={Article},
} 

@ARTICLE{
author={Milojevic Sasa T,Dzunic Dragan S,Maric Dejan,Skrucany Tomas,Mitrovic Slobodan R,Pesic Radivoje B},
year={2021},
title={Tribological Assessment of Aluminum Cylinder Material for Piston Compressors in Trucks and Buses Brake Systems},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={28},
number={4},
pages={1268-1276},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Grujovic Nenad N,Mitrovic Slobodan R,Tanaskovic Jovan D,Todorovic Petar M},
year={2021},
title={Influence of the Ringer's solution on wear of vacuum mixed poly(methyl methacrylate) bone cement in reciprocating sliding contact with AISI 316L stainless steel},
journal={HEMIJSKA INDUSTRIJA},
volume={75},
number={2},
pages={77-92},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Mitrovic Slobodan R,Grujovic Nenad N,Jovanovic Zivana M,Dzunic Dragan S,Milenkovic Strahinja},
year={2021},
title={The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding},
journal={JOURNAL OF FRICTION AND WEAR},
volume={42},
number={2},
pages={106-111},
document_type={Article},
} 

@ARTICLE{
author={Miloradovic Nenad A,Vujanac Rodoljub S,Mitrovic Slobodan R,Miloradovic Danijela M},
year={2019},
title={Dry Sliding Wear Performance of ZA27/SiC/Graphite Composites},
journal={METALS},
volume={9},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mihajlovic Goran,Gasic Milomir M,Savkovic Mile M,Mitrovic Slobodan R,Tadic Branko U},
year={2017},
title={Vibroplatform modeling with allowance for tribological aspects},
journal={JOURNAL OF FRICTION AND WEAR},
volume={38},
number={3},
pages={184-189},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Mitrovic Slobodan R,Dzunic Dragan S,Aleksandrovic Srbislav M,Djordjevic Milan,Nedeljkovic Branislav D},
year={2016},
title={Tribological behavior of four types of filler metals for hard facing under dry conditions},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={68},
number={6},
pages={729-736},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Slobodan R,Adamovic Dragan D,Zivic Fatima T,Dzunic Dragan S,Pantic Marko,Jevremovic Danimir P},
year={2016},
title={Dry Sliding Wear Behaviour of PVD TiN Coatings for Cold Forming Tools},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1},
pages={347-355},
document_type={Article},
} 

@ARTICLE{
author={Matovic Branko Z,Zivic Fatima T,Mitrovic Slobodan R,Prsic Dragan H,Maksimovic Vesna M,Volkov-Husovic Tatjana D,Kumar Ravi,Daneu Nina},
year={2016},
title={Ultra-high pressure densification and properties of nanostructured SiC},
journal={MATERIALS LETTERS},
volume={164},
number={},
pages={68-71},
document_type={Article},
} 

@ARTICLE{
author={Stojanovic Blaza Z,Babic Miroslav J,Miloradovic Nenad A,Mitrovic Slobodan R},
year={2015},
title={Tribological Behaviour of A356/10sic/3gr Hybrid Composite in Dry-Sliding Conditions},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={1},
pages={117-121},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Ruzic Jovana Dj,Bobic Biljana M,Babic Miroslav J,Vencl Aleksandar A,Mitrovic Slobodan R},
year={2014},
title={Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={612},
number={},
pages={7-15},
document_type={Article},
} 

@ARTICLE{
author={Eric Milan D,Babic Miroslav J,Mitrovic Slobodan R,Tadic Branko U,Dzunic Dragan S},
year={2014},
title={Conversion of Data Into Information in Tribology Research},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={20},
number={1},
pages={49-62},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Slobodan R,Adamovic Dragan D,Zivic Fatima T,Dzunic Dragan S,Pantic Marko},
year={2014},
title={Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions},
journal={APPLIED SURFACE SCIENCE},
volume={290},
number={},
pages={223-232},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Babic Miroslav J,Vencl Aleksandar A,Bobic Biljana M,Mitrovic Slobodan R},
year={2013},
title={Artificial aging of thixocast ZA27 alloy and particulate ZA27/SiCp composites},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={104},
number={10},
pages={954-965},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Rajkovic Viseslava M,Zivic Fatima T,Mitrovic Slobodan R,Cvijovic-Alagic Ivana Lj,Jovanovic Milan T},
year={2013},
title={The effect of processing techniques on microstructural and tribological properties of copper-based alloys},
journal={APPLIED SURFACE SCIENCE},
volume={280},
number={},
pages={646-654},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Grujovic Nenad N,Mitrovic Slobodan R,Adamovic Dragan D},
year={2013},
title={Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding},
journal={WEAR},
volume={300},
number={1-2},
pages={65-77},
document_type={Article},
} 

@ARTICLE{
author={Stojanovic Blaza Z,Babic Miroslav J,Mitrovic Slobodan R,Vencl Aleksandar A,Miloradovic Nenad A,Pantic Marko},
year={2013},
title={Tribological Characteristics of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Graphite. a Review},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={19},
number={1},
pages={83-96},
document_type={Review},
} 

@ARTICLE{
author={Babic Miroslav J,Adamovic Dragan D,Mitrovic Slobodan R,Zivic Fatima T,Eric Milan D,Dzunic Dragan S,Pantic Marko},
year={2012},
title={Wear Properties of Shot Peened Surfaces of 36nicrmo16 Alloyed Steels Under Lubricated Condition},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={4},
pages={566-576},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Slobodan R,Babic Miroslav J,Zivic Fatima T,Bobic Ilija Dj,Eric Milan D,Dzunic Dragan S,Pantic Marko},
year={2012},
title={Influence of Al2o3 Particle Content on the Sliding Wear Behaviour of Za-27 Alloy Composites},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={4},
pages={548-558},
document_type={Article},
} 

@ARTICLE{
author={Nedovic Jasmina R,Protrka Zoran M,Ninkovic Srdjan M,Mitrovic Slobodan R,Vojinovic Radisa H,Glisic J,Markovic-Filipovic B,Milosevic Bojan Z,Peulic Miodrag,Cvetkovic Aleksandar M},
year={2012},
title={Cisplatin monotherapy with concurrent radiotherapy versus combination of cisplatin and 5-fluorouracil chemotherapy with concurrent radiotherapy in patients with locoregionally advanced cervical carcinoma},
journal={JOURNAL OF BUON},
volume={17},
number={4},
pages={740-745},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Adamovic Dragan D,Mitrovic Slobodan R,Todorovic Petar M,Favaro Gregory,Pantic Marko},
year={2012},
title={Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165crmov12},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={2},
pages={228-237},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Grujovic Nenad N,Mitrovic Slobodan R,Adamovic Dragan D,Favaro Gregory},
year={2012},
title={A Comparison of Reciprocating Sliding at Low Loads and Scratch Testing for Evaluation of Tin (Pvd) Coating},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={1},
pages={80-91},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Grujovic Nenad N,Mitrovic Slobodan R,Favaro Gregory,Caunii Mihaela},
year={2012},
title={Effect of vacuum-treatment on deformation properties of PMMA bone cement},
journal={JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS},
volume={5},
number={1},
pages={129-138},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Arostegui Saioa,Favaro Gregory,Zivic Fatima T,Mrdak Mihailo R,Mitrovic Slobodan R,Popovic Vladimir M},
year={2011},
title={Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections},
journal={TRIBOLOGY INTERNATIONAL},
volume={44},
number={11},
pages={1281-1288},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Zivic Fatima T},
year={2011},
title={Effects of Al(2)O(3) particle reinforcement on the lubricated sliding wear behavior of ZA-27 alloy composites},
journal={JOURNAL OF MATERIALS SCIENCE},
volume={46},
number={21},
pages={6964-6974},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Vukelic Djordje B,Hodolic Janko,Mitrovic Slobodan R,Eric Milan D},
year={2011},
title={Conservative-Force-Controlled Feed Drive System for Down Milling},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={57},
number={5},
pages={425-439},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Cvijovic-Alagic Ivana Lj,Mitrovic Slobodan R,Vencl Aleksandar A},
year={2011},
title={Wear Behaviour of Tl6Al4V Alloy Against Al2O3 Under Linear Reciprocating Sliding},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={17},
number={1},
pages={27-36},
document_type={Article},
} 

@ARTICLE{
author={Zivic Fatima T,Babic Miroslav J,Mitrovic Slobodan R,Vencl Aleksandar A},
year={2011},
title={Continuous control as alternative route for wear monitoring by measuring penetration depth during linear reciprocating sliding of Ti6Al4V alloy},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={509},
number={19},
pages={5748-5754},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic-Alagic Ivana Lj,Cvijovic Zorica M,Mitrovic Slobodan R,Panic Vladimir V,Rakin Marko P},
year={2011},
title={Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution},
journal={CORROSION SCIENCE},
volume={53},
number={2},
pages={796-808},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Babic Miroslav J,Mitrovic Slobodan R,Ilic Nenad M,Bobic Ilija Dj,Jovanovic Milan T},
year={2010},
title={Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={101},
number={12},
pages={1524-1531},
document_type={Article},
} 

@ARTICLE{
author={Adamovic Dragan D,Babic Miroslav J,Stefanovic Milentije C,Aleksandrovic Srbislav M,Gulisija Zvonko P,Mitrovic Slobodan R},
year={2010},
title={Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricants Testing},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={3},
pages={329-339},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic-Alagic Ivana Lj,Cvijovic Zorica M,Mitrovic Slobodan R,Rakin Marko P,Veljovic Djordje N,Babic Miroslav J},
year={2010},
title={Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys},
journal={TRIBOLOGY LETTERS},
volume={40},
number={1},
pages={59-70},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Zivic Fatima T,Bobic Ilija Dj},
year={2010},
title={Wear Behavior of Composites Based on ZA-27 Alloy Reinforced by Al2O3 Particles Under Dry Sliding Condition},
journal={TRIBOLOGY LETTERS},
volume={38},
number={3},
pages={337-346},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Dzunic Dragan S,Jeremic Branislav M,Bobic Ilija Dj},
year={2010},
title={Tribological Behavior of Composites Based on ZA-27 Alloy Reinforced with Graphite Particles},
journal={TRIBOLOGY LETTERS},
volume={37},
number={2},
pages={401-410},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Jeremic Branislav M},
year={2010},
title={The influence of heat treatment on the sliding wear behavior of a ZA-27 alloy},
journal={TRIBOLOGY INTERNATIONAL},
volume={43},
number={1-2},
pages={16-21},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Vencl Aleksandar A,Mitrovic Slobodan R,Bobic Ilija Dj},
year={2009},
title={Influence of T4 Heat Treatment on Tribological Behavior of Za27 Alloy Under Lubricated Sliding Condition},
journal={TRIBOLOGY LETTERS},
volume={36},
number={2},
pages={125-134},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Jovanovic Milan T,Babic Miroslav J,Mitrovic Slobodan R},
year={2008},
title={Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al2O3 Particles},
journal={TRIBOLOGY LETTERS},
volume={32},
number={3},
pages={159-170},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Slobodan R,Zivic Z},
year={2000},
title={Increase of life cycle due to application of surface coating methods},
journal={1ST INTERNATIONAL CONFERENCE ON TRIBOLOGY IN ENVIRONMENTAL DESIGN 2000 - THE CHARACTERISTICS OF INTERACTING SURFACES - A KEY FACTOR IN SUSTAINABLE AND ECONOMIC PRODUCTS},
volume={},
number={},
pages={49-58},
document_type={Proceedings Paper},
}