@ARTICLE{
author={Tasic Marko M,Miskovic Zarko Z,Mitrovic Radivoje M,Djordjevic Branislav R,Dimic Aleksandar R,Stamenic Zoran V,Jeremic Lazar D},
year={2025},
title={Experimental Assessment of PA6 Bearing Housing Pressed-Fit for Enhanced Reliability and Multiple Maintenance Process},
journal={POLYMERS},
volume={17},
number={22},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Tasic Marko M,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2025},
title={The Test Bench for Determining Impact of Polymer Housing Material on the Bearing's Internal Friction},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, KOD 2024},
volume={174},
number={},
pages={504-512},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Atanasovska Ivana D,Soldat Natasa D,Patil Santosh S,Mitrovic Radivoje M,Tomovic Radoslav Z},
year={2023},
title={Damage Factor Calculation for Condition Monitoring of Rolling Bearings},
journal={ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING},
volume={48},
number={3},
pages={3181-3194},
document_type={Article},
} 

@ARTICLE{
author={Tasic Marko M,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2022},
title={Experimental and Numerical Transient Thermal Analysis of the Idler Bearing Housing Made of Steel Or Polymer Material},
journal={THERMAL SCIENCE},
volume={26},
number={6},
pages={4831-4840},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Djuricin Dragan N,Mitrovic Radivoje M},
year={2022},
title={Industry 4.0 - Renaissance of Engineering First Edition},
journal={SERBIAN JOURNAL OF MANAGEMENT},
volume={17},
number={1},
pages={265-269},
document_type={Book Review},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2022},
title={Industry 4.0 in Serbia - State of Development},
journal={SERBIAN JOURNAL OF MANAGEMENT},
volume={17},
number={1},
pages={5-14},
document_type={Article},
} 

@ARTICLE{
author={Grujicic Rade,Tica Milan,Stojanovic Blaza Z,Ivanovic Lozica T,Mitrovic Radivoje M,Tomovic Radoslav N},
year={2022},
title={Analysis of Impact of Shaft Speed and External Load on the Radial Ball Bearing Lubrication Regimes},
journal={FME TRANSACTIONS},
volume={50},
number={1},
pages={109-120},
document_type={Article},
} 

@ARTICLE{
author={Dimic Aleksandar R,Vencl Aleksandar A,Ristivojevic Mileta R,Mitrovic Radivoje M,Miskovic Zarko Z,Milivojevic Aleksandar M},
year={2022},
title={Influence of the running-in process on the working ability of contact surfaces in lubricated sliding conditions},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY},
volume={236},
number={4},
pages={691-700},
document_type={Article},
} 

@ARTICLE{
author={Skoko Dragisa M,Crnojevic Cvetko,Lecic Milan R,Ristivojevic Mileta R,Mitrovic Radivoje M,Burazer Jela M},
year={2022},
title={Some Characteristics of Compressible Air Impingement Jet Applied in Pneumatic Dimensional Control},
journal={EXPERIMENTAL TECHNIQUES},
volume={46},
number={1},
pages={103-113},
document_type={Article},
} 

@ARTICLE{
author={Trklja-Boca Nora,Miskovic Zarko Z,Mitrovic Radivoje M,Obradovic Bratislav M,Kuraica Milorad M},
year={2021},
title={Effects of high thermal loads produced by interaction of accelerated plasma with steel surfaces (100Cr6, 16MnCr5, 42CrMo4)},
journal={SURFACE & COATINGS TECHNOLOGY},
volume={416},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Chribik Andrej,Poloni Marian,Minarik Matej,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2020},
title={The Effect of Inert Gas in the Mixture with Natural Gas on the Parameters of the Combustion Engine},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={410-426},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Danko Jan,Bucha Jozef,Milesich Tomas,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2020},
title={Determination of Dynamic Properties of Rubber-Metal Motor Mount of Electric Powertrain},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={393-409},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bucha Jozef,Danko Jan,Milesich Tomas,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2020},
title={Dynamic Simulation of Dual Mass Flywheel},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={375-392},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Soldat Natasa D,Mitrovic Radivoje M,Atanasovska Ivana D,Tomovic Radoslav N},
year={2020},
title={A Methodology for Analyzing Radial Ball Bearing Vibrations},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={1},
pages={13-28},
document_type={Article},
} 

@ARTICLE{
author={Trklja Nora,Iskrenovic Predrag S,Miskovic Zarko Z,Krstic Ivan B,Obradovic Bratislav M,Mitrovic Radivoje M,Kuraica Milorad M,Puric Jagos M},
year={2019},
title={Study of the energy distribution within plasma flow generated by magnetoplasma accelerator},
journal={JOURNAL OF INSTRUMENTATION},
volume={14},
number={9},
pages={-},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Dobratic Predrag S,Ristivojevic Mileta R,Rosic Bozidar B,Mitrovic Radivoje M,Trifkovic Dragan R},
year={2019},
title={Mathematical Model of Energy Efficiency in Internal Spur Gears},
journal={THERMAL SCIENCE},
volume={23},
number={},
pages={S1801-S1813},
document_type={Article},
} 

@ARTICLE{
author={Miskovic Zarko Z,Mitrovic Radivoje M,Tasic Milan B,Tasic Marko M,Danko Jan},
year={2019},
title={Determination of the Wing Conveyor Idlers' Axial Loads Using the Finite Element Method},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={174-192},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Mitrovic Radivoje M},
year={2019},
title={Industry 4.0 Programs Worldwide},
journal={PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THE INDUSTRY 4.0 MODEL FOR ADVANCED MANUFACTURING (AMP 2019)},
volume={},
number={},
pages={78-99},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Stankovic Milos B,Marinkovic Aleksandar B,Grbovic Aleksandar M,Miskovic Zarko Z,Rosic Bozidar B,Mitrovic Radivoje M},
year={2019},
title={Determination of Archard's wear coefficient and wear simulation of sliding bearings},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={71},
number={1},
pages={119-125},
document_type={Article},
} 

@ARTICLE{
author={Miskovic Zarko Z,Mitrovic Radivoje M,Stamenic Zoran V,Bakic Gordana M,Djukic Milos B,Rajicic Bratislav M},
year={2018},
title={The development and application of the new methodology for conveyor idlers fits testing},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={2143-2151},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Miskovic Zarko Z,Ristivojevic Mileta R,Dimic Aleksandar R,Danko Jan,Bucha Jozef,Milesich Tomas},
year={2018},
title={Statistical correlation between the printing angle and stress and strain of 3D printed models},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={475-482},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miskovic Zarko Z,Mitrovic Radivoje M,Maksimovic Vesna M,Milivojevic Aleksandar M},
year={2017},
title={Analysis and Prediction of Vibrations of Ball Bearings Contaminated by Open Pit Coal Mine Debris Particles},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={6},
pages={1941-1950},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banjc Milan,Miltenovic Vojislav Dj,Miskovic Zarko Z,Mitrovic Radivoje M},
year={2017},
title={Prediction of Heat Generation in Transmission Bearings by Application of FEM},
journal={INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2},
volume={2294},
number={1-2},
pages={1199-1206},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Miskovic Zarko Z,Djukic Milos B,Bakic Gordana M},
year={2016},
title={Statistical correlation between vibration characteristics, surface temperatures and service life of rolling bearings - artificially contaminated by open pit coal mine debris particles},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={2338-2346},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djukic Milos B,Bakic Gordana M,Sijacki-Zeravcic Vera M,Rajicic Bratislav M,Sedmak Aleksandar S,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2016},
title={Towards a unified and practical industrial model for prediction of hydrogen embrittlement and damage in steels},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={604-611},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Grujicic Rade N,Tomovic Radoslav N,Mitrovic Radivoje M,Jovanovic Janko D,Atanasovska Ivana D},
year={2016},
title={The Analysis of Impact of Intensity of Contact Load and Angular Shaft Speed on the Heat Generation Within Radial Ball Bearing},
journal={THERMAL SCIENCE},
volume={20},
number={5},
pages={1765-1776},
document_type={Article},
} 

@ARTICLE{
author={Miskovic Zarko Z,Mitrovic Radivoje M,Stamenic Zoran V},
year={2016},
title={Analysis of Grease Contamination Influence on the Internal Radial Clearance of Ball Bearings by Thermographic Inspection},
journal={THERMAL SCIENCE},
volume={20},
number={1},
pages={255-265},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Atanasovska Ivana D,Soldat Natasa D,Momcilovic Dejan B},
year={2015},
title={Effects of Operation Temperature on Thermal Expansion and Main Parameters of Radial Ball Bearings},
journal={THERMAL SCIENCE},
volume={19},
number={5},
pages={1835-1844},
document_type={Article},
} 

@ARTICLE{
author={Scepanovic Miodrag,Tihacek-Sojic Ljiljana D,Tasic Milan B,Mitrovic Radivoje M,Todorovic Aleksandar J,Trifkovic Branka V},
year={2013},
title={Finite element analysis in defining the optimal shape and safety factor of retentive clasp arms of a removable partial denture},
journal={VOJNOSANITETSKI PREGLED},
volume={70},
number={11},
pages={999-1005},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Dejan B,Mitrovic Radivoje M,Atanasovska Ivana D},
year={2012},
title={Quantification of Stress Raiser Influence on Decrease of Machine Parts Fatigue Life},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={215-218},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Atanasovska Ivana D,Momcilovic Dejan B},
year={2012},
title={Prediction of Crack Initiation in Spur Gear Contact Zone},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={37-44},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djapic Mirko N,Popovic Predrag S,Lukic Ljubomir,Mitrovic Radivoje M},
year={2012},
title={Integrating Risk Assessment in the NAD into the ERM Model},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={3},
pages={1044-1054},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Mitrovic Radivoje M},
year={2012},
title={Efficiency of Crossed Helical Gears with Wheels Made of Sintered Steel Fe1.5cr0.2mo by Applying the Sinter-Hardening Treatment},
journal={TRANSACTIONS OF FAMENA},
volume={36},
number={2},
pages={31-40},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Momcilovic Dejan B,Eric Olivera A,Atanasovska Ivana D,Hut Nenad T},
year={2012},
title={Study on Impact Properties of Creep-Resistant Steel Thermally Simulated Heat Affected Zone},
journal={THERMAL SCIENCE},
volume={16},
number={2},
pages={513-525},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Dejan B,Odanovic Zoran D,Mitrovic Radivoje M,Atanasovska Ivana D,Vuherer Tomaz},
year={2012},
title={Failure analysis of hydraulic turbine shaft},
journal={ENGINEERING FAILURE ANALYSIS},
volume={20},
number={},
pages={54-66},
document_type={Article},
} 

@ARTICLE{
author={Popovic Predrag S,Ivanovic Gradimir S,Mitrovic Radivoje M,Subic A},
year={2012},
title={Design for reliability of a vehicle transmission system},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING},
volume={226},
number={D2},
pages={194-209},
document_type={Article},
} 

@ARTICLE{
author={Kojic Dusan,Matija Lidija R,Petrov Ljubisa,Mitrovic Radivoje M,Koruga Djuro Lj},
year={2011},
title={Surface characterisation of Pb1-XMnXTe alloy by atomic force microscopy and magnetic force mode},
journal={SURFACE ENGINEERING},
volume={27},
number={3},
pages={158-163},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D,Mitrovic Radivoje M,Momcilovic Dejan B},
year={2010},
title={Fem Model for Calculation of Hydro Turbine Shaft},
journal={SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING},
volume={},
number={},
pages={183-188},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Atanasovska Ivana D,Mitrovic Radivoje M,Momcilovic Dejan B,Subic A},
year={2010},
title={Analysis of the nominal load effects on gear load capacity using the finite-element method},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={224},
number={C11},
pages={2539-2548},
document_type={Article},
} 

@ARTICLE{
author={Ristivojevic Mileta R,Mitrovic Radivoje M,Lazovic Tatjana M},
year={2010},
title={Investigation of causes of fan shaft failure},
journal={ENGINEERING FAILURE ANALYSIS},
volume={17},
number={5},
pages={1188-1194},
document_type={Article},
} 

@ARTICLE{
author={Lazovic Tatjana M,Mitrovic Radivoje M,Ristivojevic Mileta R},
year={2010},
title={Influence Of Internal Radial Clearance On The Ball Bearing Service Life},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={1},
pages={1-8},
document_type={Article},
} 

@ARTICLE{
author={Kojic Dusan,Mitrovic Radivoje M,Matija Lidija R,Koruga Djuro Lj},
year={2009},
title={Magnetic Force Microscopy Application in Steel Structure and Milling Process Parameters Evaluation},
journal={MATERIALS AND MANUFACTURING PROCESSES},
volume={24},
number={10-11},
pages={1168-1172},
document_type={Article},
} 

@ARTICLE{
author={Tasic Milan B,Mitrovic Radivoje M,Popovic Predrag S,Tasic Marko M},
year={2009},
title={Influence of running conditions on resonant oscillations in fresh-air ventilator blades used in thermal power plants},
journal={THERMAL SCIENCE},
volume={13},
number={1},
pages={139-146},
document_type={Article},
}