@ARTICLE{
author={Orelj Jelena M,Surla Radoslav S,Pavlovic Vladimir B,Mitrovic Nebojsa S},
year={2026},
title={MI-Sensing Properties of CoSiB Amorphous Wires},
journal={IEEE TRANSACTIONS ON MAGNETICS},
volume={62},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stepanic Pavle Lj,Nikolic Predrag,Ducic Nedeljko,Mitrovic Nebojsa S,Cojbasic Zarko M},
year={2025},
title={Intelligent Sensor Integration in Robotic Systems for High-Precision Automation in the Automotive Industry},
journal={ADVANCES IN SERVICE AND INDUSTRIAL ROBOTICS, RAAD 2025},
volume={190},
number={},
pages={100-108},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Lukovic Miloljub D,Obradovic Nina N,Pavlovic Marko D},
year={2025},
title={Temperature Response, Time Delay, and Hysteresis Loop of Heat Loss Flowmeter Thermistors},
journal={IEEE SENSORS JOURNAL},
volume={25},
number={8},
pages={12695-12702},
document_type={Article},
} 

@ARTICLE{
author={Nedeljkovic Borivoje,Pavlovic Vladimir B,Obradovic Nina N,Mitrovic Nebojsa S},
year={2024},
title={Structural Features of Near Equiatomic FeCo-2V Semi-hard Magnetic Alloy Prepared by MIM Technology},
journal={SCIENCE OF SINTERING},
volume={56},
number={4},
pages={433-444},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Stanko O,Obradovic Nina N,Mitrovic Nebojsa S,Lukovic Miloljub D},
year={2024},
title={Characterization of NTC Thick Film Thermistor Paste Cu<sub>0.2</sub>Ni<sub>0.5</sub>Zn<sub>1.0</sub>Mn<sub>1.3</sub>O<sub>4</sub>},
journal={SCIENCE OF SINTERING},
volume={56},
number={3},
pages={299-308},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Sanja D,Sreckovic Milesa Z,Mitrovic Nebojsa S,Zarubica Katarina M,Zarubica Veljko S,Janicijevic Aco J,Stevic Zoran M},
year={2023},
title={Influence of Gaseous Laser in Continuous-Wave and Pulse Regimes on Biomaterial Characteristics},
journal={NUCLEAR TECHNOLOGY & RADIATION PROTECTION},
volume={38},
number={1},
pages={59-63},
document_type={Article},
} 

@ARTICLE{
author={Orelj Jelena M,Mitrovic Nebojsa S,Pavlovic Vladimir B},
year={2023},
title={MI-Sensor Element Features and Estimation of Penetration Depth and Magnetic Permeability by Magnetoresistance and Magnetoreactance of CoFeSiB Amorphous Wires},
journal={IEEE SENSORS JOURNAL},
volume={23},
number={13},
pages={14017-14024},
document_type={Article},
} 

@ARTICLE{
author={Surla Radoslav S,Vasic Milica M,Mitrovic Nebojsa S,Radovic Ljubica M,Minic Dragica M},
year={2022},
title={Magnetic properties of Fe72V4Cu1Si15B8 alloy with a composite amorphous/ nanocrystalline structure},
journal={JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS},
volume={564},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Lukovic Miloljub D,Lukovic Snezana G,Nikolic Nenad T},
year={2021},
title={Heat Loss Flowmeter for Water Based on Thick Film Thermistors in Power Save Regime},
journal={IEEE SENSORS JOURNAL},
volume={21},
number={1},
pages={199-206},
document_type={Article},
} 

@ARTICLE{
author={Surla Radoslav,Mitrovic Nebojsa S,Vasic Milica M,Minic Dragica M},
year={2020},
title={The Inverted Hysteresis Loops and Exchange Bias Effects in Amorphous/Nanocrystalline Fe72Cu1V4Si15B8 Ribbons at Room Temperature},
journal={SCIENCE OF SINTERING},
volume={52},
number={3},
pages={283-298},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Lukovic Miloljub D,Blaz Nelu V,Lukovic Snezana G,Zivanov Ljiljana D},
year={2019},
title={Uniaxial Heat Loss Anemometer in Power Save Regime},
journal={2019 42ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Nikolic Zoran M,Lukovic Miloljub D,Obradovic Nina N,Lukovic Snezana G},
year={2019},
title={Three-Axis' Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors},
journal={IEEE SENSORS JOURNAL},
volume={19},
number={22},
pages={10228-10235},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Suzana Z,Pavlovic Vera P,Mitric Miodrag N,Levic Steva M,Mitrovic Nebojsa S,Maricic Aleksa M,Vlahovic Branislav,Pavlovic Vladimir B},
year={2019},
title={Synthesis and characterization of BaTiO3/-Fe2O3 core/shell structure},
journal={JOURNAL OF ADVANCED CERAMICS},
volume={8},
number={1},
pages={133-147},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Lukovic Miloljub D,Djukic Slobodan R},
year={2018},
title={Thick Film Thermistor Sensor for Measuring Temperature Profile of Ground Top Layer},
journal={2018 41ST INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Aleksic Stanko O,Mitrovic Nebojsa S,Lukovic Miloljub D,Veljovic-Jovanovic Sonja D,Lukovic Snezana G,Nikolic Maria Vesna P,Aleksic Obrad S},
year={2018},
title={A Ground Temperature Profile Sensor Based on NTC Thick Film Segmented Thermistors: Main Properties and Applications},
journal={IEEE SENSORS JOURNAL},
volume={18},
number={11},
pages={4414-4421},
document_type={Article},
} 

@ARTICLE{
author={Nedeljkovic Borivoje,Mitrovic Nebojsa S,Orelj Jelena M,Obradovic Nina N,Pavlovic Vladimir B},
year={2017},
title={Characterization of FeCoV Alloy Processed by PIM/MIM Route},
journal={SCIENCE OF SINTERING},
volume={49},
number={3},
pages={299-309},
document_type={Article},
} 

@ARTICLE{
author={Vasic Milica M,Surla Radoslav S,Minic Dusan M,Radovic Ljubica M,Mitrovic Nebojsa S,Maricic Aleksa M,Minic Dragica M},
year={2017},
title={Thermally Induced Microstructural Transformations of Fe72Si15B8V4Cu1 Alloy},
journal={METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE},
volume={48A},
number={9},
pages={4393-4402},
document_type={Article},
} 

@ARTICLE{
author={Cukic Bratislav,Mitrovic Nebojsa S,Maricic Aleksa M},
year={2017},
title={Effect of heat treatment on structure and magnetic properties of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk amorphous alloy},
journal={CHINA FOUNDRY},
volume={14},
number={1},
pages={59-63},
document_type={Article},
} 

@ARTICLE{
author={Koprivica Branko M,Milovanovic Alenka M,Mitrovic Nebojsa S},
year={2017},
title={Mathematical modelling of frequency-dependent hysteresis and energy loss of FeBSiC amorphous alloy},
journal={JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS},
volume={422},
number={},
pages={37-42},
document_type={Article},
} 

@ARTICLE{
author={Kalezic-Glisovic Aleksandra S,Mitrovic Nebojsa S,Obradovic Nina N},
year={2015},
title={The Thermal and Magnetic Properties of the Fe89.8Ni1.5Si5.2B3C0.5 and Fe81B13Si14C2 Amorphous Alloys},
journal={SCIENCE OF SINTERING},
volume={47},
number={3},
pages={259-268},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Sanja D,Sreckovic Milesa Z,Ostojic Stanko M,Mitrovic Nebojsa S,Radovanovic Radovan V},
year={2015},
title={Contemporary problems in experiments, theory and application of interest in ecology with lasers in laboratory and remote detection},
journal={OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS},
volume={9},
number={9-10},
pages={1301-1309},
document_type={Article},
} 

@ARTICLE{
author={Ristanovic Zoran M,Kalezic-Glisovic Aleksandra S,Mitrovic Nebojsa S,Dukic S,Kosanovic Darko A,Maricic Aleksa M},
year={2015},
title={The Influence of Mechanochemical Activation and Thermal Treatment on Magnetic Properties of the BaTiO3-FexOy Powder Mixture},
journal={SCIENCE OF SINTERING},
volume={47},
number={1},
pages={3-14},
document_type={Article},
} 

@ARTICLE{
author={Ebersold Zoran Z,Cosovic Nemanja,Djukic Slobodan R,Mitrovic Nebojsa S,Obradovic Dragisa},
year={2015},
title={Applying quadraphonic transmission ultrasonic defectoscopy on standard aluminum materials},
journal={MATERIALS TESTING},
volume={57},
number={1},
pages={95-99},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Suzana Z,Obradovic Nina N,Pavlovic Vladimir B,Kosanovic Darko A,Mitric Miodrag N,Mitrovic Nebojsa S,Pouchly Vaclav,Kachlik Martin,Maca Karel},
year={2014},
title={Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate},
journal={SCIENCE OF SINTERING},
volume={46},
number={3},
pages={283-290},
document_type={Article},
} 

@ARTICLE{
author={Jordovic Branka A,Nedeljkovic Borivoje,Mitrovic Nebojsa S,Zivanic Jeroslav M,Maricic Aleksa M},
year={2014},
title={Effect of Heat Treatment on Structural Changes in Metastable Alsi10mg Alloy},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={50},
number={2},
pages={133-137},
document_type={Article},
} 

@ARTICLE{
author={Ebersold Zoran Z,Mitrovic Nebojsa S,Djukic Slobodan R,Peulic Aleksandar S,Obradovic Dragisa},
year={2013},
title={Low Frequencies for Cardboard Quality Assurance},
journal={MATERIALS TESTING},
volume={55},
number={2},
pages={109-113},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Djukic Slobodan R,Randjic Sinisa S,Ristanovic Zoran M,Danninger H},
year={2012},
title={Soft Magnetic Properties of MnZn Ferrites Prepared by Powder Injection Moulding},
journal={SCIENCE OF SINTERING},
volume={44},
number={3},
pages={355-364},
document_type={Article},
} 

@ARTICLE{
author={Ebersold Zoran Z,Mitrovic Nebojsa S,Djukic Slobodan R,Jordovic Branka A,Peulic Aleksandar S},
year={2012},
title={Defectoscopy of Direct Laser Sintered Metals by Low Transmission Ultrasonic Frequencies},
journal={SCIENCE OF SINTERING},
volume={44},
number={2},
pages={177-185},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Kane SN,Roth S,Kalezic-Glisovic Aleksandra S,Mickel C,Eckert J},
year={2012},
title={The Precipitation of Nanocrystalline Structure in the Joule Heated Fe72al5ga2p11c6b4 Metallic Glasses},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={48},
number={2},
pages={319-324},
document_type={Article},
} 

@ARTICLE{
author={Ebersold Zoran Z,Mitrovic Nebojsa S,Djukic Slobodan R,Peulic Aleksandar S},
year={2012},
title={A novel ultrasonic technique for material testing},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={2},
pages={614-621},
document_type={Article},
} 

@ARTICLE{
author={Ribic-Zelenovic Lenka,Cirovic Natasa A,Spasojevic Miroslav D,Mitrovic Nebojsa S,Maricic Aleksa M,Pavlovic Vladimir B},
year={2012},
title={Microstructural properties of electrochemically prepared Ni-Fe-W powders},
journal={MATERIALS CHEMISTRY AND PHYSICS},
volume={135},
number={1},
pages={212-219},
document_type={Article},
} 

@ARTICLE{
author={Maricic Aleksa M,Spasojevic Miroslav D,Kalezic-Glisovic Aleksandra S,Ribic-Zelenovic Lenka,Djukic Slobodan R,Mitrovic Nebojsa S},
year={2012},
title={The stress effect on electrical resistivity sensitivity of FeBSiC amorphous ribbon},
journal={SENSORS AND ACTUATORS A-PHYSICAL},
volume={174},
number={},
pages={103-106},
document_type={Article},
} 

@ARTICLE{
author={Djukic Slobodan R,Maricic VA,Kalezic-Glisovic Aleksandra S,Ribic-Zelenovic Lenka,Randjic Sinisa S,Mitrovic Nebojsa S,Obradovic Nina N},
year={2011},
title={The Effect of Temperature and Frequency on Magnetic Properties of the Fe(81)B(13)Si(4)C(2) Amorphous Alloy},
journal={SCIENCE OF SINTERING},
volume={43},
number={2},
pages={175-182},
document_type={Article},
} 

@ARTICLE{
author={Obradovic Nina N,Filipovic Suzana Z,Pavlovic Vladimir B,Maricic Aleksa M,Mitrovic Nebojsa S,Balac Igor M,Ristic Momcilo M},
year={2011},
title={Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics},
journal={SCIENCE OF SINTERING},
volume={43},
number={2},
pages={145-151},
document_type={Article},
} 

@ARTICLE{
author={Kosanovic Darko A,Maricic Aleksa M,Mitrovic Nebojsa S,Ristic Momcilo M},
year={2011},
title={Interdependence of Fundamental and Applied Research in Material Science},
journal={SCIENCE OF SINTERING},
volume={43},
number={2},
pages={119-126},
document_type={Article},
} 

@ARTICLE{
author={Zlatkov BS,Mitrovic Nebojsa S,Nikolic Maria Vesna P,Maricic Aleksa M,Danninger H,Aleksic Obrad S,Halwax E},
year={2010},
title={Properties of MnZn ferrites prepared by powder injection molding technology},
journal={MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS},
volume={175},
number={3},
pages={217-222},
document_type={Article},
} 

@ARTICLE{
author={Maricic Aleksa M,Spasojevic Miroslav D,Ribic-Zelenovic Lenka,Mitrovic Nebojsa S},
year={2009},
title={Effect of structural changes during annealing on the electric and magnetic properties of Fe81B13Si4C2 amorphous alloy},
journal={JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS},
volume={11},
number={8},
pages={1088-1093},
document_type={Article},
} 

@ARTICLE{
author={Obradovic Nina N,Mitric Miodrag N,Nikolic Maria Vesna P,Minic Dragica M,Mitrovic Nebojsa S,Ristic Momcilo M},
year={2009},
title={Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={471},
number={1-2},
pages={272-277},
document_type={Article},
} 

@ARTICLE{
author={Obradovic Nina N,Mitrovic Nebojsa S,Pavlovic Vladimir B},
year={2009},
title={Structural and electrical properties of sintered zinc-titanate ceramics},
journal={CERAMICS INTERNATIONAL},
volume={35},
number={1},
pages={35-37},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Kane SN,Tyagi PV,Roth S},
year={2008},
title={Effect of dc-Joule-heating thermal processing on magnetoimpedance of Fe72Al5Ga2P11C6B4 amorphous alloy},
journal={JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS},
volume={320},
number={20},
pages={E792-E796},
document_type={Article},
} 

@ARTICLE{
author={Kalezic-Glisovic Aleksandra S,Maricic Aleksa M,Mitrovic Nebojsa S,Simeunovic Radojko L,Spasojevic Miroslav D},
year={2008},
title={Mechanical strain and temperature annealing effect on structural relaxation kinetics of the Fe89.8Ni1.5Si5.2B3C0.5 amorphous alloy},
journal={JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS},
volume={10},
number={3},
pages={504-507},
document_type={Article},
} 

@ARTICLE{
author={Kalezic-Glisovic Aleksandra S,Mitrovic Nebojsa S,Maricic Aleksa M,Djukic Slobodan R,Simeunovic Radojko L},
year={2008},
title={Study of stress-annealing enhancement of magnetoimpedance effect in Fe89.8Ni1.5Si5.2B3C0.5 metallic glass ribbons},
journal={ACTA PHYSICA POLONICA A},
volume={113},
number={1},
pages={103-106},
document_type={Article},
} 

@ARTICLE{
author={Kalezic-Glisovic Aleksandra S,Mitrovic Nebojsa S,Maricic Aleksa M,Simeunovic Radojko L},
year={2007},
title={Magnetoimpedance effect in Fe89.8Ni1.5Si5.2B3C0.5 metallic glass ribbons},
journal={Research Trends in Contemporary Materials Science},
volume={555},
number={},
pages={533-538},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Cukic Bratislav,Jordovic Branka A,Roth S,Stoica M},
year={2007},
title={Microstructure and microhardness in current annealed Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass},
journal={Research Trends in Contemporary Materials Science},
volume={555},
number={},
pages={521-526},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Roth S,Stoica M},
year={2007},
title={Magnetic softening of bulk amorphous FeCrMoGaPCB rods by current annealing technique},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={434},
number={},
pages={618-622},
document_type={Article},
} 

@ARTICLE{
author={Kalezic-Glisovic Aleksandra S,Novakovic Lazar,Maricic Aleksa M,Minic Dragica M,Mitrovic Nebojsa S},
year={2006},
title={Investigation of structural relaxation, crystallization process and magnetic properties of the Fe-Ni-Si-B-C amorphous alloy},
journal={MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY},
volume={131},
number={1-3},
pages={45-48},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Roth S,Degmova J,Stoica M,Eckert J},
year={2005},
title={Synthesis, structure and properties of iron-based bulk glass-forming metallic alloys prepared by different processing},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={321-326},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Roth S,Djukic Slobodan R,Eckert J},
year={2005},
title={Magnetic softening of metallic glasses by current annealing technique},
journal={Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors},
volume={184},
number={},
pages={331-344},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kane SN,Mitrovic Nebojsa S,Gupta A,Roth S,Mazaleyrat F,Eckert J},
year={2005},
title={Influence of Nb addition on structural and magnetic properties of FeNbAlGaPCB metallic glasses},
journal={JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS},
volume={290},
number={},
pages={1461-1464},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Djukic Slobodan R,Roth S,Eckert J},
year={2004},
title={Magnetoresistance and magnetoimpedance effects in DC Joule heated Fe72Al5Ga2P11C6B4 amorphous ribbons},
journal={CZECHOSLOVAK JOURNAL OF PHYSICS},
volume={54},
number={},
pages={D157-D160},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Simeunovic Radojko L,Maricic Aleksa M,Jordovic Branka A},
year={2004},
title={Synthesis, preparation and properties of new Fe-based soft magnetic amorphous alloys with a large supercooled liquid region},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={367-373},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S},
year={2003},
title={Magnetoresistance of the Fe72CU1V3Si16B8 amorphous alloy annealed by direct current Joule heating},
journal={JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS},
volume={262},
number={2},
pages={302-307},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Roth S,Eckert J,Mickel C},
year={2002},
title={Microstructure evolution and soft magnetic properties of Fe72-xNbxAl5Ga2P11C6B4 (x = 0, 2) metallic glasses},
journal={JOURNAL OF PHYSICS D-APPLIED PHYSICS},
volume={35},
number={18},
pages={2247-2253},
document_type={Article},
} 

@ARTICLE{
author={Roth S,Grahl H,Degmova J,Schlorke-de Boer N,Stoica M,Borrego JM,Conde A,Mitrovic Nebojsa S,Eckert J},
year={2002},
title={Magnetic properties of (Fe,Co)-(Al,Ga,Si)-(B,C,P) alloys with large supercooled liquid region: Influence of preparation conditions and heat treatment},
journal={JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS},
volume={4},
number={2},
pages={199-205},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Roth S,Eckert J},
year={2001},
title={Kinetics of the glass-transition and crystallization process of Fe72-xNbxAl5Ga2P11C6B4 (x=0,2) metallic glasses},
journal={APPLIED PHYSICS LETTERS},
volume={78},
number={15},
pages={2145-2147},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Nebojsa S,Djukic Slobodan R,Djuric Stevan},
year={2000},
title={Crystallization of the Fe-Cu-M-Si-B (M = Nb, V) amorphous alloys by direct-current Joule heating},
journal={IEEE TRANSACTIONS ON MAGNETICS},
volume={36},
number={5},
pages={3858-3862},
document_type={Article},
}