@ARTICLE{
author={Stefanovic-Marinovic Jelena,Peric Marko,Miltenovic Aleksandar V,Marinkovic Dragan,Cojbasic Zarko M},
year={2025},
title={An Approach to Multicriteria Optimization of the Three-Stage Planetary Gear Train},
journal={MACHINES},
volume={13},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Milan,Banic Milan S,Stamenkovic Dusan S,Simonovic Milos B,Miltenovic Aleksandar V,Pavlovic Vukasin D},
year={2024},
title={The Influence of Rubber Hysteresis on the Sliding Friction Coefficient During Contact Between Viscoelastic Bodies and a Hard Substrate},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={24},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vitkovic Nikola M,Radovic Ljiljana M,Stojkovic Jelena R,Miltenovic Aleksandar V},
year={2024},
title={The Geometrical Personalization of Human Organs 3d Models by Using the Characteristic Product Features Methodology},
journal={FACTA UNIVERSITATIS-SERIES MATHEMATICS AND INFORMATICS},
volume={39},
number={5},
pages={899-913},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Tanaskovic Jovan D,Stefanovic-Marinovic Jelena,Rangelov Damjan,Peric Marko},
year={2024},
title={Wear Load Capacity of Crossed Helical Gears},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={22},
number={1},
pages={125-138},
document_type={Article},
} 

@ARTICLE{
author={Vitkovic Nikola M,Marinkovic Dragan Z,Stan Sergiu Dan,Simonovic Milos B,Miltenovic Aleksandar V,Tomic Misa M,Barac Milica},
year={2024},
title={Decision Support System for Managing Marshalling Yard Deviations},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={21},
number={1},
pages={121-134},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Vitkovic Nikola M,Simonovic Milos B,Peric Marko,Rangelov Damjan},
year={2024},
title={Investigation of the Influence of Contact Patterns of Worm-Gear Sets on Friction Heat Generation during Meshing},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stamenkovic Dusan S,Banic Milan S,Miltenovic Aleksandar V,Simonovic Milos B},
year={2023},
title={Modern Approaches to Condition Monitoring of Railway Assets},
journal={XXVI. MEDZINARODNEJ KONFERENCIE: SUCASNE PROBLEMY V KOLAJOVYCH VOZIDLACH, DIEL II},
volume={},
number={},
pages={251-260},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Pavlovic Ivan R,Stamenkovic Dusan S,Nikolic Vlastimir D,Miltenovic Aleksandar V,Despenic Nikola Dj,Stamenkovic-Atanasov Marija B,Janevski Goran B},
year={2022},
title={Train Obstacle Detection System Stabilization and Stochastic Vibrations Analysis Using the Moment Lyapunov Exponent Method},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={6},
pages={49-62},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Aleksandar D,Banic Milan S,Simonovic Milos B,Stamenkovic Dusan S,Miltenovic Aleksandar V,Adamovic Gavrilo,Rangelov Damjan},
year={2022},
title={Integration of Computer Vision and Convolutional Neural Networks in the System for Detection of Rail Track and Signals on the Railway},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Rakonjac Ivan,Oarcea Alexandru,Peric Marko,Rangelov Damjan},
year={2022},
title={Detection and Monitoring of Pitting Progression on Gear Tooth Flank Using Deep Learning},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Banic Milan S,Pavlovic Ivan R,Miltenovic Aleksandar V,Simonovic Milos B,Mladenovic Marko,Jovanovic Dragan S,Rackov Milan J},
year={2022},
title={Prediction of Dynamic Response of Vibration Isolated Railway Obstacle Detection System},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={3},
pages={51-64},
document_type={Article},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Aleksandar V,Jovanovic Dragan S,Tica Milan M},
year={2020},
title={Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation},
journal={POLYMERS},
volume={12},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Tica Milan M,Banic Milan S,Miltenovic Djordje},
year={2020},
title={Prediction of Temperature Distribution in the Worm Gear Meshing},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={18},
number={2},
pages={329-339},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S},
year={2020},
title={Thermal Analysis of a Crossed Helical Gearbox Using Fem},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={1},
pages={67-78},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Velimirovic Nikola},
year={2019},
title={Technical Solution of the Drive System for Mixing Dough Machine},
journal={9TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2019): TRENDS IN NEW INDUSTRIAL REVOLUTION},
volume={290},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Aleksandar V,Simonovic Milos B,Milosevic Milos},
year={2019},
title={Design of Housing and Vibration Suppression for Obstacle Detection System in Railways},
journal={XXIV. MEDZINARODNA KONFERENCIA SUCASNE PROBLEMY V KOLAJAVYCH VOZIDLACH, DIEL I},
volume={},
number={},
pages={23-32},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Miltenovic Djordje},
year={2017},
title={Load capacity of worm gear transmission from aspect of maximal use of available resources},
journal={8TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2017) - TRENDS IN NEW INDUSTRIAL REVOLUTION},
volume={121},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banjc Milan,Miltenovic Vojislav Dj,Miskovic Zarko Z,Mitrovic Radivoje M},
year={2017},
title={Prediction of Heat Generation in Transmission Bearings by Application of FEM},
journal={INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2},
volume={2294},
number={1-2},
pages={1199-1206},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosevic Milos,Banic Milan S,Stamenkovic Dusan S,Pavlovic Vukasin D,Tomic Misa M,Miltenovic Aleksandar V},
year={2016},
title={Distribution of Generated Friction Heat at Wheel-Rail Contact During Wheel Slipping Acceleration},
journal={THERMAL SCIENCE},
volume={20},
number={},
pages={S1561-S1571},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V},
year={2016},
title={Damage Types, Load Capacity and Efficiency of Crossed Helical Gears with Wheels from Sintered Steel},
journal={Theory and Practice of Gearing and Transmissions: In Honor of Professor Faydor L. Litvin},
volume={34},
number={},
pages={189-232},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bucha J,Miltenovic Aleksandar V,Banic Milan S},
year={2015},
title={Utilization of CAD Skeleton Method for Interconnection of CAE Programs Used in Vehicle Design Process},
journal={TRANSPORT MEANS 2015, PTS I AND II},
volume={},
number={},
pages={244-247},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Banic Milan S},
year={2015},
title={Wear Load Capacity of Crossed Helical Gears With Wheel Made From Sintered Steel},
journal={SCIENCE OF SINTERING},
volume={47},
number={2},
pages={153-163},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Djordje,Tica Milan M,Miltenovic Aleksandar V,Banic Milan S,Zivkovic Srdjan M,Miskovic Zarko Z},
year={2014},
title={Pitting of Tooth Flanks of Crossed Helical Gears Made of Sintered Steel},
journal={TRANSACTIONS OF FAMENA},
volume={38},
number={4},
pages={77-88},
document_type={Article},
} 

@ARTICLE{
author={Rackov Milan J,Milovancevic Milos D,Kanovic Zeljko S,Veres Miroslav,Rafa Klara,Banic Milan S,Miltenovic Aleksandar V},
year={2014},
title={Optimization of Hcr Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={4},
pages={723-732},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Vojislav Dj,Banic Milan S,Miltenovic Aleksandar V},
year={2012},
title={Modern Approach for Load Capacity Calculation of Worm Gears},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={31-36},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Milovancevic Milos D,Banic Milan S},
year={2012},
title={Experimental and Fem Analysis of Sintered Steel Worm Gear Wear},
journal={TRANSACTIONS OF FAMENA},
volume={36},
number={4},
pages={85-96},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Kuzmanovic Sinisa B,Miltenovic Vojislav Dj,Tica Milan M,Rackov Milan J},
year={2012},
title={Thermal Stability of Crossed Helical Gears with Wheels Made from Sintered Steel},
journal={THERMAL SCIENCE},
volume={16},
number={},
pages={S541-S553},
document_type={Article},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Vojislav Dj,Milosevic Milos,Miltenovic Aleksandar V,Djekic Petar,Rackov Milan J},
year={2012},
title={Prediction of Heat Generation in Rubber Or Rubber-Metal Springs},
journal={THERMAL SCIENCE},
volume={16},
number={},
pages={S527-S539},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Mitrovic Radivoje M},
year={2012},
title={Efficiency of Crossed Helical Gears with Wheels Made of Sintered Steel Fe1.5cr0.2mo by Applying the Sinter-Hardening Treatment},
journal={TRANSACTIONS OF FAMENA},
volume={36},
number={2},
pages={31-40},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Djordje,Banic Milan S,Miltenovic Aleksandar V},
year={2010},
title={Effect of Lubricants on Efficiency Coefficient of Worm Gear Transmitters},
journal={SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING},
volume={},
number={},
pages={163-166},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tomovic Radoslav N,Miltenovic Vojislav Dj,Banic Milan S,Miltenovic Aleksandar V},
year={2010},
title={Vibration response of rigid rotor in unloaded rolling element bearing},
journal={INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES},
volume={52},
number={9},
pages={1176-1185},
document_type={Article},
}