Davidovic Nikola S,Milos Marko V,Jojic Branislav (2025) Development of an Expendable Turbojet Engine for the Propulsion of an Unmanned Aerial Vehicle, FME TRANSACTIONS, vol. 53, br. 4, str. 585-594 (Article) 

Jankovic Milan M,Balac Igor M,Popovic Mihajlo D,Pjevic Milos D,Milos Marko V (2024) Tensile strength and stiffness properties of additively manufactured PET-G polymer-based composite plates reinforced with different weight fractions of short carbon fibers, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 38, br. 6, str. 2971-2977 (Article) 

Kolarevic Nenad M,Stankovic Milos B,Milos Marko V,Davidovic Nikola S (2022) Analysis and design of the gas generator multifunctional bulkhead considering the thermal and structural loads, ADVANCES IN MECHANICAL ENGINEERING, vol. 14, br. 8, str. - (Article) 

Davidovic Nikola S,Kolarevic Nenad M,Stankovic Milos B,Milos Marko V (2022) Research of expendable turbojet tubular combustion chamber, ADVANCES IN MECHANICAL ENGINEERING, vol. 14, br. 5, str. - (Article) 

Vujovic Milica M,Ristanovic Milan R,Milos Marko V (2022) Experimental Protocol for Assessing the Relation Between Indoor Air Quality and Living Unit Conditions in AAL, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 29, br. 2, str. 536-541 (Article) 

Stankovic Milos B,Kolarevic Nenad M,Davidovic Nikola S,Milos Marko V (2022) Influence of the air pressure and oil amount to the temperature of the high-speed bearings lubricated by oil mist, INDUSTRIAL LUBRICATION AND TRIBOLOGY, vol. 74, br. 3, str. 335-341 (Article) 

Kolarevic Nenad M,Crnojevic Stevan C,Stankovic Milos B,Latkovic Nenad,Milos Marko V (2020) Experimental verification of performance of tip-jet helicopter propulsion system, MATERIALS TODAY-PROCEEDINGS, vol. 32, br. , str. 112-117 (Proceedings Paper) 

Kolarevic Nenad M,Crnojevic Stevan C,Stankovic Milos B,Milos Marko V (2019) Indirect approach of measuring the axial force on turbo-jet engine rotor, MATERIALS TODAY-PROCEEDINGS, vol. 12, br. , str. 335-339 (Proceedings Paper) 

Damljanovic Dijana B,Vukovic Djordje S,Isakovic Jovan M,Milos Marko V (2019) Supersonic test cases at high angles of attack, MATERIALS TODAY-PROCEEDINGS, vol. 12, br. , str. 239-245 (Proceedings Paper) 

Vujovic Milica M,Ristanovic Milan R,Milos Marko V,Perales Lopez Francisco J (2018) Health Monitoring Modular Panel Interface Design and Evaluation, THERMAL SCIENCE, vol. 22, br. , str. S1259-S1270 (Article; Proceedings Paper) 

Lalosevic Marija D,Komatina Mirko S,Milos Marko V,Rudonja Nedzad R (2018) Green Roofs and Cool Materials as Retrofitting Strategies for Urban Heat Island Mitigation Case Study in Belgrade, Serbia, THERMAL SCIENCE, vol. 22, br. 6, str. 2309-2324 (Article) 

Nauparac Dragan B,Prsic Dragan H,Milos Marko V (2018) Nonlinearities in Control Description and Design of an Electro Hydraulic Actuator for Flexible Nozzle Thrust Vector Control, ACTUATORS, vol. 7, br. 2, str. - (Article) 

Kolarevic Nenad M,Ognjanovic Milosav B,Milos Marko V (2018) Failures of multifunctional bulkhead caused by high gradient of temperature, pressure and speed of rotation, ENGINEERING FAILURE ANALYSIS, vol. 89, br. , str. 100-117 (Article) 

Ognjanovic Milosav B,Vasin Sanja Lj,Milos Marko V (2017) Testing of Gear Transmission Units with Continual Variation of Transmission Ratio for WT-application, MATERIALS TODAY-PROCEEDINGS, vol. 4, br. 5, str. 5909-5914 (Proceedings Paper) 

Damljanovic Dijana B,Isakovic Jovan M,Milos Marko V (2017) Wind tunnel measurement quality in testing of a standard model, MATERIALS TODAY-PROCEEDINGS, vol. 4, br. 5, str. 5791-5796 (Proceedings Paper) 

Stojanovic Djordje,Milos Marko V,Vujovic Milica M (2017) Why Does Architecture Need to Move? The Role of Integrated Technical Systems in Architecture, ADVANCES IN ROBOT DESIGN AND INTELLIGENT CONTROL, vol. 540, br. , str. 543-549 (Proceedings Paper) 

Ilic Biljana,Milos Marko V,Isakovic Jovan M (2017) Cascade nonlinear feedforward-feedback control of stagnation pressure in a supersonic blowdown wind tunnel, MEASUREMENT, vol. 95, br. , str. 424-438 (Article) 

Ognjanovic Milosav B,Milos Marko V,Kolarevic Nenad M (2016) Testing and prediction of structural failures caused by fretting, MATERIALS TODAY-PROCEEDINGS, vol. 3, br. 4, str. 1103-1107 (Proceedings Paper) 

Ilic Biljana,Milosavljevic Mirko,Isakovic Jovan M,Milos Marko V (2016) Stagnation pressure transient control in a supersonic blowdown wind tunnel test facility, MATERIALS TODAY-PROCEEDINGS, vol. 3, br. 4, str. 987-992 (Proceedings Paper) 

Milos Predrag,Davidovic Nikola,Jojic Branislav,Milos Marko V,Todic Ivana S (2015) A Novel 6 Dof Thrust Vector Control Test Stand, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 22, br. 5, str. 1247-1254 (Article) 

Davidovic Nikola,Milos Predrag,Jojic Branislav,Milos Marko V (2015) Contribution to Research of Spoiler and Dome Deflector TVC Systems in Rocket Propulsion, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 22, br. 4, str. 907-915 (Article) 

Vasin Sanja Lj,Ognjanovic Milosav B,Milos Marko V (2015) Wind Turbine Wth Continual Variation of Transmission Ratio - Design and Testing Methodology -, PROCEEDINGS OF THE ROMANIAN ACADEMY SERIES A-MATHEMATICS PHYSICS TECHNICAL SCIENCES INFORMATION SCIENCE, vol. 16, br. 2, str. 184-192 (Article) 

Nauparac Dragan B,Prsic Dragan H,Milos Marko V,Todic Ivana S (2015) Different Modeling Technologies of Hydraulic Load Simulator for Thrust Vector Control Actuator, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 22, br. 3, str. 599-606 (Article) 

Tanaskovic Jovan D,Lucanin Vojkan J,Milkovic Dragan D,Simic Goran Z,Milos Marko V (2014) Experimental Research of Characteristics of Modified Tube Absorbers of Kinetic Collision Energy of Passenger Coaches, EXPERIMENTAL TECHNIQUES, vol. 38, br. 3, str. 37-44 (Article) 

Todic Ivana S,Milos Marko V,Pavisic Mirko N (2013) Position and Speed Control of Electromechanical Actuator for Aerospace Applications, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 20, br. 5, str. 853-860 (Article) 

Tomic Radoljub P,Sedmak Aleksandar S,Catic Dobrivoje M,Milos Marko V,Stefanovic Zoran (2011) Thermal Stress Analysis of a Fiber-epoxy Composite Material, THERMAL SCIENCE, vol. 15, br. 2, str. 559-563 (Article) 

Ivanovic Ivana B,Sedmak Aleksandar S,Milos Marko V,Zivkovic Aleksandar B,Lazic Mirjana M (2011) Numerical Study of Transient Three-dimensional Heat Conduction Problem with a Moving Heat Source, THERMAL SCIENCE, vol. 15, br. 1, str. 257-266 (Article) 

Khan Muhammad Ashraf,Todic Ivana S,Milos Marko V,Stefanovic Zoran,Blagojevic Djordje Dj (2010) Control of Electro-Mechanical Actuator for Aerospace Applications, STROJARSTVO, vol. 52, br. 3, str. 303-313 (Article) 

Kalaba Dragan V,Sedmak Aleksandar S,Radakovic Zoran J,Milos Marko V (2010) Thermomechanical Modelling the Resistance Welding of Pbsb Alloy, THERMAL SCIENCE, vol. 14, br. 2, str. 437-450 (Article) 

Bozic Vladica S,Milos Marko V (2001) Effects of oxidizer particle size on propellants based on modified polyvinyl chloride, JOURNAL OF PROPULSION AND POWER, vol. 17, br. 5, str. 1012-1016 (Article)