@ARTICLE{
author={Davidovic Nikola S,Milos Marko V,Jojic Branislav},
year={2025},
title={Development of an Expendable Turbojet Engine for the Propulsion of an Unmanned Aerial Vehicle},
journal={FME TRANSACTIONS},
volume={53},
number={4},
pages={585-594},
document_type={Article},
} 

@ARTICLE{
author={Jankovic Milan M,Balac Igor M,Popovic Mihajlo D,Pjevic Milos D,Milos Marko V},
year={2024},
title={Tensile strength and stiffness properties of additively manufactured PET-G polymer-based composite plates reinforced with different weight fractions of short carbon fibers},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={38},
number={6},
pages={2971-2977},
document_type={Article},
} 

@ARTICLE{
author={Kolarevic Nenad M,Stankovic Milos B,Milos Marko V,Davidovic Nikola S},
year={2022},
title={Analysis and design of the gas generator multifunctional bulkhead considering the thermal and structural loads},
journal={ADVANCES IN MECHANICAL ENGINEERING},
volume={14},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Davidovic Nikola S,Kolarevic Nenad M,Stankovic Milos B,Milos Marko V},
year={2022},
title={Research of expendable turbojet tubular combustion chamber},
journal={ADVANCES IN MECHANICAL ENGINEERING},
volume={14},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vujovic Milica M,Ristanovic Milan R,Milos Marko V},
year={2022},
title={Experimental Protocol for Assessing the Relation Between Indoor Air Quality and Living Unit Conditions in AAL},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={29},
number={2},
pages={536-541},
document_type={Article},
} 

@ARTICLE{
author={Stankovic Milos B,Kolarevic Nenad M,Davidovic Nikola S,Milos Marko V},
year={2022},
title={Influence of the air pressure and oil amount to the temperature of the high-speed bearings lubricated by oil mist},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={74},
number={3},
pages={335-341},
document_type={Article},
} 

@ARTICLE{
author={Kolarevic Nenad M,Crnojevic Stevan C,Stankovic Milos B,Latkovic Nenad,Milos Marko V},
year={2020},
title={Experimental verification of performance of tip-jet helicopter propulsion system},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={32},
number={},
pages={112-117},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kolarevic Nenad M,Crnojevic Stevan C,Stankovic Milos B,Milos Marko V},
year={2019},
title={Indirect approach of measuring the axial force on turbo-jet engine rotor},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={12},
number={},
pages={335-339},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Damljanovic Dijana B,Vukovic Djordje S,Isakovic Jovan M,Milos Marko V},
year={2019},
title={Supersonic test cases at high angles of attack},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={12},
number={},
pages={239-245},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vujovic Milica M,Ristanovic Milan R,Milos Marko V,Perales Lopez Francisco J},
year={2018},
title={Health Monitoring Modular Panel Interface Design and Evaluation},
journal={THERMAL SCIENCE},
volume={22},
number={},
pages={S1259-S1270},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Lalosevic Marija D,Komatina Mirko S,Milos Marko V,Rudonja Nedzad R},
year={2018},
title={Green Roofs and Cool Materials as Retrofitting Strategies for Urban Heat Island Mitigation Case Study in Belgrade, Serbia},
journal={THERMAL SCIENCE},
volume={22},
number={6},
pages={2309-2324},
document_type={Article},
} 

@ARTICLE{
author={Nauparac Dragan B,Prsic Dragan H,Milos Marko V},
year={2018},
title={Nonlinearities in Control Description and Design of an Electro Hydraulic Actuator for Flexible Nozzle Thrust Vector Control},
journal={ACTUATORS},
volume={7},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kolarevic Nenad M,Ognjanovic Milosav B,Milos Marko V},
year={2018},
title={Failures of multifunctional bulkhead caused by high gradient of temperature, pressure and speed of rotation},
journal={ENGINEERING FAILURE ANALYSIS},
volume={89},
number={},
pages={100-117},
document_type={Article},
} 

@ARTICLE{
author={Ognjanovic Milosav B,Vasin Sanja Lj,Milos Marko V},
year={2017},
title={Testing of Gear Transmission Units with Continual Variation of Transmission Ratio for WT-application},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={4},
number={5},
pages={5909-5914},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Damljanovic Dijana B,Isakovic Jovan M,Milos Marko V},
year={2017},
title={Wind tunnel measurement quality in testing of a standard model},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={4},
number={5},
pages={5791-5796},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Stojanovic Djordje,Milos Marko V,Vujovic Milica M},
year={2017},
title={Why Does Architecture Need to Move? The Role of Integrated Technical Systems in Architecture},
journal={ADVANCES IN ROBOT DESIGN AND INTELLIGENT CONTROL},
volume={540},
number={},
pages={543-549},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ilic Biljana,Milos Marko V,Isakovic Jovan M},
year={2017},
title={Cascade nonlinear feedforward-feedback control of stagnation pressure in a supersonic blowdown wind tunnel},
journal={MEASUREMENT},
volume={95},
number={},
pages={424-438},
document_type={Article},
} 

@ARTICLE{
author={Ognjanovic Milosav B,Milos Marko V,Kolarevic Nenad M},
year={2016},
title={Testing and prediction of structural failures caused by fretting},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={3},
number={4},
pages={1103-1107},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ilic Biljana,Milosavljevic Mirko,Isakovic Jovan M,Milos Marko V},
year={2016},
title={Stagnation pressure transient control in a supersonic blowdown wind tunnel test facility},
journal={MATERIALS TODAY-PROCEEDINGS},
volume={3},
number={4},
pages={987-992},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milos Predrag,Davidovic Nikola,Jojic Branislav,Milos Marko V,Todic Ivana S},
year={2015},
title={A Novel 6 Dof Thrust Vector Control Test Stand},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={5},
pages={1247-1254},
document_type={Article},
} 

@ARTICLE{
author={Davidovic Nikola,Milos Predrag,Jojic Branislav,Milos Marko V},
year={2015},
title={Contribution to Research of Spoiler and Dome Deflector TVC Systems in Rocket Propulsion},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={4},
pages={907-915},
document_type={Article},
} 

@ARTICLE{
author={Vasin Sanja Lj,Ognjanovic Milosav B,Milos Marko V},
year={2015},
title={Wind Turbine Wth Continual Variation of Transmission Ratio - Design and Testing Methodology -},
journal={PROCEEDINGS OF THE ROMANIAN ACADEMY SERIES A-MATHEMATICS PHYSICS TECHNICAL SCIENCES INFORMATION SCIENCE},
volume={16},
number={2},
pages={184-192},
document_type={Article},
} 

@ARTICLE{
author={Nauparac Dragan B,Prsic Dragan H,Milos Marko V,Todic Ivana S},
year={2015},
title={Different Modeling Technologies of Hydraulic Load Simulator for Thrust Vector Control Actuator},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={3},
pages={599-606},
document_type={Article},
} 

@ARTICLE{
author={Tanaskovic Jovan D,Lucanin Vojkan J,Milkovic Dragan D,Simic Goran Z,Milos Marko V},
year={2014},
title={Experimental Research of Characteristics of Modified Tube Absorbers of Kinetic Collision Energy of Passenger Coaches},
journal={EXPERIMENTAL TECHNIQUES},
volume={38},
number={3},
pages={37-44},
document_type={Article},
} 

@ARTICLE{
author={Todic Ivana S,Milos Marko V,Pavisic Mirko N},
year={2013},
title={Position and Speed Control of Electromechanical Actuator for Aerospace Applications},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={5},
pages={853-860},
document_type={Article},
} 

@ARTICLE{
author={Tomic Radoljub P,Sedmak Aleksandar S,Catic Dobrivoje M,Milos Marko V,Stefanovic Zoran},
year={2011},
title={Thermal Stress Analysis of a Fiber-epoxy Composite Material},
journal={THERMAL SCIENCE},
volume={15},
number={2},
pages={559-563},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Ivana B,Sedmak Aleksandar S,Milos Marko V,Zivkovic Aleksandar B,Lazic Mirjana M},
year={2011},
title={Numerical Study of Transient Three-dimensional Heat Conduction Problem with a Moving Heat Source},
journal={THERMAL SCIENCE},
volume={15},
number={1},
pages={257-266},
document_type={Article},
} 

@ARTICLE{
author={Khan Muhammad Ashraf,Todic Ivana S,Milos Marko V,Stefanovic Zoran,Blagojevic Djordje Dj},
year={2010},
title={Control of Electro-Mechanical Actuator for Aerospace Applications},
journal={STROJARSTVO},
volume={52},
number={3},
pages={303-313},
document_type={Article},
} 

@ARTICLE{
author={Kalaba Dragan V,Sedmak Aleksandar S,Radakovic Zoran J,Milos Marko V},
year={2010},
title={Thermomechanical Modelling the Resistance Welding of Pbsb Alloy},
journal={THERMAL SCIENCE},
volume={14},
number={2},
pages={437-450},
document_type={Article},
} 

@ARTICLE{
author={Bozic Vladica S,Milos Marko V},
year={2001},
title={Effects of oxidizer particle size on propellants based on modified polyvinyl chloride},
journal={JOURNAL OF PROPULSION AND POWER},
volume={17},
number={5},
pages={1012-1016},
document_type={Article},
}