@ARTICLE{
author={Vidojkovic Aleksandar,Vostrikov Sergey,Majstorovic Vidosav D},
year={2025},
title={Digital Manufacturing in Serbia - Case Studies},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={209-222},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zivkovic Jovan,Vukadinovic Vojin,Majstorovic Vidosav D},
year={2025},
title={A Model for Tool Life Cost Management in Digital Manufacturing},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={64-73},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jokovic Zora,Jankovic Goran,Jankovic Slobodan,Supurovic Aleksandar,Majstorovic Vidosav D},
year={2023},
title={Quality 4.0 in Digital Manufacturing-Example of Good Practice},
journal={QUALITY INNOVATION PROSPERITY-KVALITA INOVACIA PROSPERITA},
volume={27},
number={2},
pages={177-207},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Djuricin Dragan N,Mitrovic Radivoje M},
year={2022},
title={Industry 4.0 - Renaissance of Engineering First Edition},
journal={SERBIAN JOURNAL OF MANAGEMENT},
volume={17},
number={1},
pages={265-269},
document_type={Book Review},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Mitrovic Radivoje M,Miskovic Zarko Z},
year={2022},
title={Industry 4.0 in Serbia - State of Development},
journal={SERBIAN JOURNAL OF MANAGEMENT},
volume={17},
number={1},
pages={5-14},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Jankovic Goran,Zivkov Srdjan,Stojadinovic Slavenko M},
year={2021},
title={Digital Manufacturing in SMEs based on the Context of the Industry 4.0 framework - one approach},
journal={10TH CIRP SPONSORED CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGIES (DET 2020) - DIGITAL TECHNOLOGIES AS ENABLERS OF INDUSTRIAL COMPETITIVENESS AND SUSTAINABILITY},
volume={54},
number={},
pages={52-57},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Gruza Maciej,Gaska Adam,Sladek Jerzy A,Stojadinovic Slavenko M,Majstorovic Vidosav D,Gaska Piotr,Harmatys Wiktor},
year={2021},
title={Method for Accuracy Assessment of the Length Measurement Unit of Laser Tracking Systems},
journal={APPLIED SCIENCES-BASEL},
volume={11},
number={19},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slavenko M,Majstorovic Vidosav D,Gaska Adam,Sladek Jerzy A,Durakbasa Numan M},
year={2021},
title={Development of a Coordinate Measuring Machine-Based Inspection Planning System for Industry 4.0},
journal={APPLIED SCIENCES-BASEL},
volume={11},
number={18},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slavenko M,Majstorovic Vidosav D,Durakbasa Numan M},
year={2021},
title={Toward a cyber-physical manufacturing metrology model for industry 4.0},
journal={AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING},
volume={35},
number={1},
pages={20-36},
document_type={Article},
} 

@ARTICLE{
author={Pavol-Monka Peter,Monkova Katarina,Majstorovic Vidosav D,Bozic Zeljko,Andrej Andrej},
year={2021},
title={Optimal cutting parameter specification of newly designed milling tools based on the frequency monitoring},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={115},
number={3},
pages={777-794},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Stojadinovic Slavenko M,Lalic Bojan P,Marjanovic Ugljesa},
year={2020},
title={ERP in Industry 4.0 Context},
journal={ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: THE PATH TO DIGITAL TRANSFORMATION AND INNOVATION OF PRODUCTION MANAGEMENT SYSTEMS, PT I},
volume={591},
number={},
pages={287-294},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Todorovic Tanja Z,Lalic Bojan P,Majstorovic Vidosav D,Marjanovic Ugljesa,Tasic Nemanja Z},
year={2020},
title={General Readiness Assessment of Industry 4.0: Evidence from Serbian Manufacturing Industry},
journal={ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: THE PATH TO DIGITAL TRANSFORMATION AND INNOVATION OF PRODUCTION MANAGEMENT SYSTEMS, PT I},
volume={591},
number={},
pages={139-146},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zgodavova Kristina,Bober Peter,Majstorovic Vidosav D,Monkova Katarina,Santos Gilberto,Juhaszova Darina},
year={2020},
title={Innovative Methods for Small Mixed Batches Production System Improvement: The Case of a Bakery Machine Manufacturer},
journal={SUSTAINABILITY},
volume={12},
number={15},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D},
year={2020},
title={Cloud-based cyber-physical systems in manufacturing Cloud-based cyber-physical systems in manufacturing},
journal={PRODUCTION PLANNING & CONTROL},
volume={31},
number={7},
pages={611-612},
document_type={Book Review},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Zivkovic Srdjan P,Djurdjanovic Dragan,Sabbagh Ramin,Kvrgic Vladimir M,Gligorijevic Nemanja},
year={2019},
title={Building of Internet of Things Model for Cyber-Physical Manufacturing Metrology Model (CPM3)},
journal={52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS)},
volume={81},
number={},
pages={862-867},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Medojevic Milovan M,Medic Nenad Dj,Marjanovic Ugljesa,Lalic Bojan P,Majstorovic Vidosav D},
year={2019},
title={Exploring the Impact of Industry 4.0 Concepts on Energy and Environmental Management Systems: Evidence from Serbian Manufacturing Companies},
journal={ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: TOWARDS SMART PRODUCTION MANAGEMENT SYSTEMS, APMS 2019, PT II},
volume={},
number={},
pages={355-362},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Algheriani Nuri Mohamed Saad,Majstorovic Vidosav D,Kirin Snezana D,Spasojevic-Brkic Vesna K},
year={2019},
title={Risk Model for Integrated Management System},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={6},
pages={1833-1840},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Durakbasa Numan M,Takaya Yasuhiro,Stojadinovic Slavenko M},
year={2019},
title={Advanced Manufacturing Metrology in Context of Industry 4.0 Model},
journal={PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON MEASUREMENT AND QUALITY CONTROL - CYBER PHYSICAL ISSUE (IMEKO TC 14 2019)},
volume={},
number={},
pages={1-11},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Mitrovic Radivoje M},
year={2019},
title={Industry 4.0 Programs Worldwide},
journal={PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THE INDUSTRY 4.0 MODEL FOR ADVANCED MANUFACTURING (AMP 2019)},
volume={},
number={},
pages={78-99},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Paris Adrian Stere,Tarcolea Constantin,Croitoru Sorin-Mihai,Majstorovic Vidosav D},
year={2019},
title={Statistical Study of Parameters in the Process of Orthogonal Cutting Surface Hardness},
journal={PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THE INDUSTRY 4.0 MODEL FOR ADVANCED MANUFACTURING (AMP 2019)},
volume={},
number={},
pages={68-77},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Belic Zivorad I,Majstorovic Vidosav D,Djurdjanovic Dragan,Kirin Snezana D},
year={2019},
title={Data Driven Root Cause Analyses in Multistage Manufacturing Utilising Life Cycle Wide Product Information},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={4},
pages={920-926},
document_type={Article},
} 

@ARTICLE{
author={Djurdjanovic Dragan,Ul Haq Asad,Magnanini Maria Chiara,Majstorovic Vidosav D},
year={2019},
title={Robust model-based control of multistage manufacturing processes},
journal={CIRP ANNALS-MANUFACTURING TECHNOLOGY},
volume={68},
number={1},
pages={479-482},
document_type={Article},
} 

@ARTICLE{
author={Pastucha Peter,Majstorovic Vidosav D,Kucera Marian,Beno Pavel,Krile Srecko},
year={2019},
title={Study of Cutting Tool Durability at a Short-Term Discontinuous Turning Test},
journal={ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2018},
volume={},
number={},
pages={493-501},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Marjanovic Ugljesa,Lalic Bojan P,Majstorovic Vidosav D,Medic Nenad Dj,Prester Jasna,Palcic Iztok},
year={2018},
title={How to Increase Share of Product-Related Services in Revenue? Strategy Towards Servitization},
journal={ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: SMART MANUFACTURING FOR INDUSTRY 4.0, APMS 2018},
volume={536},
number={},
pages={57-64},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vitkovic Nikola M,Stojkovic Milos S,Majstorovic Vidosav D,Trajanovic Miroslav D,Milovanovic Jelena R},
year={2018},
title={Novel design approach for the creation of 3D geometrical model of personalized bone scaffold},
journal={CIRP ANNALS-MANUFACTURING TECHNOLOGY},
volume={67},
number={1},
pages={177-180},
document_type={Article},
} 

@ARTICLE{
author={Raweni Abuajila,Majstorovic Vidosav D,Sedmak Aleksandar S,Tadic Srdjan S,Kirin Snezana D},
year={2018},
title={Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={3},
pages={861-866},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Stojadinovic Slavenko M,Zivkovic Srdjan P,Djurdjanovic Dragan,Jakovljevic Zivana B,Gligorijevic Nemanja},
year={2017},
title={Cyber-Physical Manufacturing Metrology Model (CPM3) for Sculptured Surfaces - Turbine Blade Application},
journal={MANUFACTURING SYSTEMS 4.0},
volume={63},
number={},
pages={658-663},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Croitoru Sorin-Mihai,Majstorovic Vidosav D},
year={2017},
title={Superficial hardening in orthogonal cutting},
journal={10TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '16},
volume={62},
number={},
pages={209-214},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djurdjanovic Dragan,Jiao Yibo,Majstorovic Vidosav D},
year={2017},
title={Multistage manufacturing process control robust to inaccurate knowledge about process noise},
journal={CIRP ANNALS-MANUFACTURING TECHNOLOGY},
volume={66},
number={1},
pages={437-440},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Croitoru Sorin-Mihai,Majstorovic Vidosav D},
year={2017},
title={On Superficial Hardness in Complex Cutting Process},
journal={16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO)},
volume={58},
number={},
pages={590-595},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sibalija Tatjana V,Zivkovic Srdjan P,Fountas Nikolaos A,Majstorovic Vidosav D,Macuzic Jelena Z,Vaxevanidis Nikolaos M},
year={2016},
title={Virtual optimisation of CAI process parameters for the sculptured surface inspection},
journal={FACTORIES OF THE FUTURE IN THE DIGITAL ENVIRONMENT},
volume={57},
number={},
pages={574-579},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jakovljevic Zivana B,Markovic Veljko,Puzovic Radovan,Majstorovic Vidosav D},
year={2016},
title={Recognition of one class of quadrics from 3D point clouds},
journal={FACTORIES OF THE FUTURE IN THE DIGITAL ENVIRONMENT},
volume={57},
number={},
pages={292-297},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Fountas NA,Stergiou CI,Majstorovic Vidosav D,Vaxevanidis Nikolaos M},
year={2016},
title={"Intelligent optimization for sculptured surface CNC tool-paths"},
journal={5TH CIRP GLOBAL WEB CONFERENCE - RESEARCH AND INNOVATION FOR FUTURE PRODUCTION (CIRPE 2016)},
volume={55},
number={},
pages={140-145},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Stojadinovic Slavenko M,Majstorovic Vidosav D,Durakbasa Numan M,Sibalija Tatjana V},
year={2016},
title={Towards an intelligent approach for CMM inspection planning of prismatic parts},
journal={MEASUREMENT},
volume={92},
number={},
pages={326-339},
document_type={Article},
} 

@ARTICLE{
author={Stojadinovic Slavenko M,Majstorovic Vidosav D,Durakbasa Numan M,Sibalija Tatjana V},
year={2016},
title={Ants Colony Optimisation of a Measuring Path of Prismatic Parts on a Cmm},
journal={METROLOGY AND MEASUREMENT SYSTEMS},
volume={23},
number={1},
pages={119-132},
document_type={Article},
} 

@ARTICLE{
author={Tekic Jasmina,Majstorovic Vidosav D,Markovic Dejan Lj},
year={2015},
title={Applying the Model of Excellence in Dental Healthcare},
journal={SRPSKI ARHIV ZA CELOKUPNO LEKARSTVO},
volume={143},
number={1-2},
pages={56-62},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Sibalija Tatjana V,Ercevic Marko M,Ercevic Bojan M},
year={2014},
title={CAI model for prismatic parts in digital manufacturing},
journal={8TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - DET 2014 DISRUPTIVE INNOVATION IN MANUFACTURING ENGINEERING TOWARDS THE 4TH INDUSTRIAL REVOLUTION},
volume={25},
number={},
pages={27-32},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sibalija Tatjana V,Petronic Sanja Z,Majstorovic Vidosav D,Milosavljevic Andjelka},
year={2014},
title={Modelling and optimisation of laser shock peening using an integrated simulated annealing-based method},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={73},
number={5-8},
pages={1141-1158},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Sibalija Tatjana V,Ercevic Bojan M,Ercevic Marko M},
year={2013},
title={Capp Model for Prismatic Parts in Digital Manufacturing},
journal={DIGITAL PRODUCT AND PROCESS DEVELOPMENT SYSTEMS},
volume={411},
number={},
pages={190-204},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Marinkovic Valentina D,Sibalija Tatjana V,Majstorovic Vidosav D,Tasic Ljiljana},
year={2013},
title={Impact Analysis of the Implemented Quality Management System on Business Performances in Pharmaceutical-Chemical Industry in Serbia},
journal={HEMIJSKA INDUSTRIJA},
volume={67},
number={3},
pages={535-546},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Trajanovic Miroslav D,Vitkovic Nikola M,Stojkovic Milos S},
year={2013},
title={Reverse engineering of human bones by using method of anatomical features},
journal={CIRP ANNALS-MANUFACTURING TECHNOLOGY},
volume={62},
number={1},
pages={167-170},
document_type={Article},
} 

@ARTICLE{
author={Marinkovic Valentina D,Kostic Elizabeta,Tasic Ljiljana,Majstorovic Vidosav D},
year={2013},
title={Conceptual Model for Outsourcing Process in Pharmaceutical Supply Chain},
journal={INDIAN JOURNAL OF PHARMACEUTICAL EDUCATION AND RESEARCH},
volume={47},
number={1},
pages={55-61},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Majstorovic Vidosav D},
year={2012},
title={An integrated approach to optimise parameter design of multi-response processes based on Taguchi method and artificial intelligence},
journal={JOURNAL OF INTELLIGENT MANUFACTURING},
volume={23},
number={5},
pages={1511-1528},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Majstorovic Vidosav D},
year={2012},
title={An integrated simulated annealing-based method for robust multiresponse process optimisation},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={59},
number={9-12},
pages={1227-1244},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Majstorovic Vidosav D,Miljkovic Zoran Dj},
year={2011},
title={An intelligent approach to robust multi-response process design},
journal={INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH},
volume={49},
number={17},
pages={5079-5097},
document_type={Article},
} 

@ARTICLE{
author={Radlovacki Vladan,Beker Ivan,Majstorovic Vidosav D,Pecujlija Mladen,Stanivukovic Dragutin,Kamberovic Bato},
year={2011},
title={Quality Managers' Estimates of Quality Management Principles Application in Certified Organisations in Transitional Conditions - Is Serbia Close to TQM?},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={57},
number={11},
pages={851-861},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Marinkovic Valentina D},
year={2011},
title={The Development of Business Standardization and Integrated Management Systems},
journal={JOURNAL OF MEDICAL BIOCHEMISTRY},
volume={30},
number={4},
pages={334-345},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Majstorovic Vidosav D,Sokovic Mirko},
year={2011},
title={Taguchi-Based and Intelligent Optimisation of a Multi-Response Process Using Historical Data},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={57},
number={4},
pages={357-365},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Petronic Sanja Z,Majstorovic Vidosav D,Prokic-Cvetkovic Radica,Milosavljevic Andjelka},
year={2011},
title={Multi-response design of Nd:YAG laser drilling of Ni-based superalloy sheets using Taguchi's quality loss function, multivariate statistical methods and artificial intelligence},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={54},
number={5-8},
pages={537-552},
document_type={Article},
} 

@ARTICLE{
author={Sibalija Tatjana V,Majstorovic Vidosav D},
year={2009},
title={Multi-response optimisation of thermosonic copper wire-bonding process with correlated responses},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={42},
number={3-4},
pages={363-371},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Stefanovic N},
year={2005},
title={Six sigma - The methodology for acheiving total business excellence},
journal={AMST '05: Advanced Manufacturing Systems and Technology, Proceedings},
volume={},
number={486},
pages={739-748},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Majstorovic Vidosav D},
year={2001},
title={The application of quality management system (QMS) - ISO 9001-2000},
journal={JUGOSLOVENSKA MEDICINSKA BIOHEMIJA-YUGOSLAV MEDICAL BIOCHEMISTRY},
volume={20},
number={4},
pages={245-250},
document_type={Article},
} 

@ARTICLE{
author={Majstorovic Vidosav D,Hodolic Janko,Stevic Miodrag J},
year={1998},
title={Model for CMM testing by LMS},
journal={PROCEEDINGS OF THE THIRTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING},
volume={},
number={},
pages={550-553},
document_type={Proceedings Paper},
}