@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Korac Marija S,Dotlic Milan D},
year={2022},
title={Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters},
journal={APPLIED ENERGY},
volume={307},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Gajic Natasa M,Korac Marija S,Jevtic Sanja O,Sokic Miroslav D,Stojanovic Jovica N},
year={2021},
title={Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge},
journal={MINERALS},
volume={11},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Andjic Zoran M,Stopic Srecko R},
year={2020},
title={Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites},
journal={METALS},
volume={10},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M,Ranitovic Milisav B},
year={2019},
title={Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products},
journal={JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT},
volume={21},
number={6},
pages={1402-1413},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2019},
title={Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag},
journal={INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH},
volume={16},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Gajic Natasa M,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Trpcevska Jarmila,Stamatovic Mirko},
year={2019},
title={Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={84},
number={4},
pages={423-433},
document_type={Article},
} 

@ARTICLE{
author={Gajic Natasa M,Kamberovic Zeljko J,Andjic Zoran M,Trpcevska Jarmila,Plesingerova Beatrice,Korac Marija S},
year={2019},
title={Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP)},
journal={METALS},
volume={9},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Parezanin Vladimir M,Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Dimitrijevic Silvana B},
year={2018},
title={Design of Anti-Tarnish Sterling Silver Ag-Cu-Zn Alloy and Investigation of Silicon Addition Influence on Mechanical and Corrosion Characteristics},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={24},
number={3},
pages={267-274},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Andjic Zoran M,Gajic Natasa M,Djokic Jovana M,Jevtic Sanja O},
year={2018},
title={Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards},
journal={METALS},
volume={8},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Jovanovic Nikola,Tomovic Bozidar,Gajic Natasa M},
year={2018},
title={Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace},
journal={JOURNAL OF SUSTAINABLE METALLURGY},
volume={4},
number={2},
pages={251-259},
document_type={Article},
} 

@ARTICLE{
author={Radivojevic M,Pendic Jugoslav,Srejic A,Korac Marija S,Davey C,Benzonelli A,Martinon-Torres M,Jovanovic N,Kamberovic Zeljko J},
year={2018},
title={Experimental design of the Cu-As-Sn ternary colour diagram},
journal={JOURNAL OF ARCHAEOLOGICAL SCIENCE},
volume={90},
number={},
pages={106-119},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Gavrilovski Milorad P,Sokic Miroslav D,Korac Marija S},
year={2017},
title={Combustion of Metallurgical Wastes Using Secondary Aluminum Foils},
journal={COMBUSTION SCIENCE AND TECHNOLOGY},
volume={189},
number={6},
pages={1072-1089},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Sokic Miroslav D,Gavrilovski Milorad P,Korac Marija S},
year={2016},
title={Designing of Synergistic Waste Mixtures for Multiphase Reactive Smelting},
journal={METALS},
volume={6},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M,Mihajlovic Aleksandar M,Uljarevic Jelena B},
year={2016},
title={Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium},
journal={HEMIJSKA INDUSTRIJA},
volume={70},
number={2},
pages={137-142},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Rogan Jelena R},
year={2016},
title={Solidified structure and leaching properties of metallurgical wastewater treatment sludge after solidification/stabilization process},
journal={JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING},
volume={51},
number={1},
pages={34-43},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Sokic Miroslav D,Maksimovic Vesna M},
year={2014},
title={Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams},
journal={INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS},
volume={21},
number={8},
pages={806-812},
document_type={Article},
} 

@ARTICLE{
author={Ranitovic Milisav B,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P,Issa Hatim,Andjic Zoran M},
year={2014},
title={Investigation of Possibility for Stabilization and Valorization of Electric Arc Furnace Dust and Glass From Electronic Waste},
journal={SCIENCE OF SINTERING},
volume={46},
number={1},
pages={83-93},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2014},
title={Wear Resistance and Dynamic Fracture Toughness of Hypoeutectic High-Chromium White Cast Iron Alloyed with Niobium and Vanadium},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={3},
pages={343-348},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S},
year={2014},
title={Solidification of FE19CR2.9CRV Alloy},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={50},
number={1},
pages={27-30},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Sokic Miroslav D},
year={2014},
title={Synthesis of Alpha-Al2O3 Based Foams with Improved Properties as Catalyst Carriers},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={1},
pages={45-50},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Jordovic Branka A},
year={2013},
title={Effect of Niobium and Vanadium Additions on the As-Cast Microstructure and Properties of Hypoeutectic Fe-Cr-C Alloy},
journal={ISIJ INTERNATIONAL},
volume={53},
number={12},
pages={2160-2166},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Ivsic-Bajceta Dragana,Ristic Mirjana Dj,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2013},
title={Leaching Properties of Secondary Lead Slag Stabilized/Solidified with Cement and Selected Additives},
journal={ENVIRONMENT PROTECTION ENGINEERING},
volume={39},
number={3},
pages={149-163},
document_type={Article},
} 

@ARTICLE{
author={Ivsic-Bajceta Dragana,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={A solidification/stabilization process for wastewater treatment sludge from a primary copper smelter},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={78},
number={5},
pages={725-739},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={Correlation of microstructure with the wear resistance and fracture toughness of white cast iron alloys},
journal={METALS AND MATERIALS INTERNATIONAL},
volume={19},
number={3},
pages={473-481},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={Microstructure and mechanical properties of Fe-Cr-C-Nb white cast irons},
journal={MATERIALS & DESIGN},
volume={47},
number={},
pages={41-48},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Kamberovic Zeljko J,Gavrilovski Milorad P,Korac Marija S,Andjic Zoran M},
year={2013},
title={MODELING OF METALLURGICAL PROPERTIES OF SINTER MIXTURES OF NONSTANDARD RAW IRON-BEARING MATERIALS},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={},
pages={5-8},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Korac Marija S,Gavrilovski Milorad P,Kamberovic Zeljko J},
year={2013},
title={Possibility of Carbon Steel Eafd Solidification/Stabilization in Concrete},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={},
pages={182-188},
document_type={Article},
} 

@ARTICLE{
author={Markovic Srdjan V,Stakic M,Manasijevic Srecko,Kamberovic Zeljko J,Radisa Radomir,Korac Marija S},
year={2012},
title={Examination of the Microstructure and Properties of Low-Frequency Electromagnetic Casting 6060 Aluminum Alloy Billets and Bars},
journal={PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY},
volume={49},
number={12},
pages={736-755},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Korac Marija S,Gavrilovski Milorad P,Pavlovic Milan D,Kamberovic Zeljko J},
year={2012},
title={Possibility of Carbon Steel EAFD Solidification/Stabilization in Concrete},
journal={REVISTA DE CHIMIE},
volume={63},
number={10},
pages={1008-1012},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Sokic Miroslav D,Matkovic Vladislav Lj,Andjic Zoran M,Korac Marija S,Nikolic Vesna DR},
year={2012},
title={Effects of Additives on Nickel (II)-Chloride Hydrogen Reduction for Production of Nanocomposite Catalysts},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={5},
pages={37-41},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2012},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={4},
pages={8-13},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2011},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={16},
number={12},
pages={52-57},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S},
year={2011},
title={Solidification of High Chromium White Cast Iron Alloyed with Vanadium},
journal={MATERIALS TRANSACTIONS},
volume={52},
number={3},
pages={386-390},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Andjic Zoran M,Filipovic Mirjana M,Tasic Milos},
year={2010},
title={Sintered Materials Based on Copper and Alumina Powders Synthesized by a Novel Method},
journal={SCIENCE OF SINTERING},
volume={42},
number={1},
pages={81-90},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L,Kamberovic Zeljko J,Korac Marija S},
year={2009},
title={Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys},
journal={MATERIALS TRANSACTIONS},
volume={50},
number={10},
pages={2488-2492},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Tasic Milos,Gavrilovski Milorad P},
year={2008},
title={Nanocomposite Powders For New Contact Materials Based On Copper And Alumina},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={14},
number={4},
pages={215-218},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Andjic Zoran M,Tasic Milos,Kamberovic Zeljko J},
year={2007},
title={Sintering of Cu-Al2O3 nano-composite powders produced by a thermochemical route},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={72},
number={11},
pages={1115-1125},
document_type={Article},
} 

@ARTICLE{
author={Andjic Zoran M,Korac Marija S,Kamberovic Zeljko J,Vujovic Aleksandar C,Tasic Milos},
year={2007},
title={Analysis of the properties of a Cu-Al2O3 sintered system based on ultra fine and nanocomposite powders},
journal={SCIENCE OF SINTERING},
volume={39},
number={2},
pages={145-152},
document_type={Article},
} 

@ARTICLE{
author={Andjic Zoran M,Korac Marija S,Tasic Milos,Raic Karlo T,Kamberovic Zeljko J},
year={2006},
title={The synthesis of ultrafine and nanocomposite powders based on copper, silver anal alumina},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={44},
number={3},
pages={145-150},
document_type={Article},
}