Bugarski Vladimir,Backalic Todor M,Kanovic Zeljko S (2025) Fuzzy Decision Support System for Single-Chamber Ship Lock for Two Vessels, APPLIED SYSTEM INNOVATION, vol. 9, br. 1, str. - (Article) 

Backalic Svetlana,Kanovic Zeljko S,Backalic Todor M (2025) A Case Study on Predicting Road Casualties Among Young Car Drivers in the Republic of Serbia Using Machine Learning, SAFETY, vol. 11, br. 4, str. - (Article) 

Milosevic Aleksandar D,Simunovic Goran,Kanovic Zeljko S,Simunovic Katica,Kocovic Vladimir,Vukelic Djordje B (2025) Modelling and Optimization of Surface Quality and Productivity in Turning Inconel 825 Alloy, INTERNATIONAL JOURNAL OF SIMULATION MODELLING, vol. 24, br. 4, str. - (Article) 

Curcic Jelena I,Kanovic Zeljko S,Nikolic Milutin N,Savic Srdjan Z (2025) Evolutionary Approach to Time-Limited Profit-Based Traveling Salesman Problem in Mobile Robotics, ADVANCES IN SERVICE AND INDUSTRIAL ROBOTICS, RAAD 2025, vol. 190, br. , str. 91-99 (Proceedings Paper) 

Milosevic Aleksandar D,Simunovic Goran,Kanovic Zeljko S,Simunovic Katica,Santosi Zeljko Dj,Sokac Mario Z,Vukelic Djordje B (2024) Comprehensive Evaluation of Dimensional Deviation, Flank Wear, Surface Roughness and Material Removal Rate in Dry Turning of C45 Steel, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, vol. 22, br. 4, str. 547-566 (Article) 

Kovacic Ivana N,Kanovic Zeljko S,Rajs Vladimir M,Teofanov Ljiljana,Zhu Rui (2024) Reaching a desirable metastructure for passive vibration attenuation by using a machine learning approach, NONLINEAR DYNAMICS, vol. , br. , str. - (Article; Early Access) 

Kovacic Ivana N,Teofanov Ljiljana,Kanovic Zeljko S,Zhao Jianlei,Zhu Rui,Rajs Vladimir M (2023) On the influence of internal oscillators on the performance of metastructures: Modelling and tuning conditions, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, vol. 205, br. , str. - (Article) 

Kovacic Ivana N,Kanovic Zeljko S (2023) Chladni Plate in Anechoic Chamber: Symmetry in Vibrational and Acoustic Response, SYMMETRY-BASEL, vol. 15, br. 9, str. - (Article) 

Jovicic Goran,Milosevic Aleksandar D,Kanovic Zeljko S,Sokac Mario Z,Simunovic Goran,Savkovic Borislav S,Vukelic Djordje B (2023) Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate, METALS, vol. 13, br. 6, str. - (Article) 

Knezevic Ivan,Rackov Milan J,Kanovic Zeljko S,Buljevic Anja,Antic Aco,Tica Milan M,Zivkovic Aleksandar M (2023) An Analysis of the Influence of Surface Roughness and Clearance on the Dynamic Behavior of Deep Groove Ball Bearings Using Artificial Neural Networks, MATERIALS, vol. 16, br. 9, str. - (Article) 

Vukelic Djordje B,Simunovic Katica,Kanovic Zeljko S,Saric Tomislav,Doroslovacki Ksenija,Prica Miljana Dj,Simunovic Goran (2022) Modelling surface roughness in finish turning as a function of cutting tool geometry using the response surface method, Gaussian process regression and decision tree regression, ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, vol. 17, br. 3, str. 367-380 (Article) 

Kovacic Ivana N,Rakaric Zvonko,Kanovic Zeljko S,Rajs Vladimir M (2022) Metastructure with integrated internal oscillators of constant, linearly and nonlinearly varying natural frequency, FRONTIERS IN PHYSICS, vol. 10, br. , str. - (Article) 

Kanovic Zeljko S,Vukelic Djordje B,Simunovic Katica,Prica Miljana Dj,Saric Tomislav,Tadic Branko U,Simunovic Goran (2022) The Modelling of Surface Roughness after the Ball Burnishing Process with a High-Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression, METALS, vol. 12, br. 2, str. - (Article) 

Batilovic Mehmed,Kanovic Zeljko S,Susic Zoran R,Markovic Marko Z,Bulatovic Vladimir (2022) Deformation Analysis: the Modified Gredod Method, GEODETSKI VESTNIK, vol. 66, br. 1, str. 60-75 (Article) 

Batilovic Mehmed,Djurovic Radovan,Susic Zoran R,Kanovic Zeljko S,Cekic Zoran D (2022) Robust Estimation of Deformation from Observation Differences Using Some Evolutionary Optimisation Algorithms, SENSORS, vol. 22, br. 1, str. - (Article) 

Morozov AL,Nigmatullin RR,Agrusti G,Lino P,Maione Guido,Kanovic Zeljko S,Martinez-Roman Javier (2021) Microcontroller Realization of an Induction Motors Fault Detection Method based on FFT and Statistics of Fractional Moments, 2021 29TH MEDITERRANEAN CONFERENCE ON CONTROL AND AUTOMATION (MED), vol. , br. , str. 65-70 (Proceedings Paper) 

Vukelic Djordje B,Simunovic Katica,Kanovic Zeljko S,Saric Tomislav,Tadic Branko U,Simunovic Goran (2021) Multi-objective optimization of steel AISI 1040 dry turning using genetic algorithm, NEURAL COMPUTING & APPLICATIONS, vol. 33, br. 19, str. 12445-12475 (Article) 

Vukelic Djordje B,Kanovic Zeljko S,Sokac Mario Z,Santosi Zeljko Dj,Budak Igor M,Tadic Branko U (2021) Modelling of Micro-Turning Process Based on Constant Cutting Force, INTERNATIONAL JOURNAL OF SIMULATION MODELLING, vol. 20, br. 1, str. 146-157 (Article) 

Batilovic Mehmed,Susic Zoran R,Kanovic Zeljko S,Markovic Marko Z,Vasic Dejan D,Bulatovic Vladimir (2021) Increasing efficiency of the robust deformation analysis methods using genetic algorithm and generalised particle swarm optimisation, SURVEY REVIEW, vol. 53, br. 378, str. 193-205 (Article) 

Vukelic Djordje B,Simunovic Katica,Simunovic Goran,Saric Tomislav,Kanovic Zeljko S,Budak Igor M,Agarski Boris (2020) Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions, JOURNAL OF CLEANER PRODUCTION, vol. 266, br. , str. - (Article) 

Knezevic Ivan,Zivkovic Aleksandar M,Rackov Milan J,Kanovic Zeljko S,Bojanic-Sejat Mirjana (2019) Analysis of the Impact of Lubrication on the Dynamic Behavior of Ball Bearings Using Artificial Neural Networks, ROMANIAN JOURNAL OF ACOUSTICS AND VIBRATION, vol. 16, br. 2, str. 178-183 (Article) 

Reljic Dejan D,Jerkan Dejan G,Kanovic Zeljko S (2019) Broken Rotor Bar Fault Detection Using Advanced IM Model and Artificial Intelligence Approach, PROCEEDINGS OF 18TH INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES (IEEE EUROCON 2019), vol. , br. , str. - (Proceedings Paper) 

Lazarevic Sladjana L,Congradac Velimir D,Andjelkovic Aleksandar S,Kljajic Miroslav V,Kanovic Zeljko S (2019) District Heating Substation Elements Modeling for the Development of the Real-Time Model, THERMAL SCIENCE, vol. 23, br. 3, str. 2061-2070 (Article) 

Lazarevic Sladjana L,Congradac Velimir D,Andjelkovic Aleksandar S,Capko Darko,Kanovic Zeljko S (2019) A novel approach to real-time modelling of the district heating substation system using LabVIEW, JOURNAL OF CLEANER PRODUCTION, vol. 217, br. , str. 360-370 (Article) 

Matic Dragan,Kanovic Zeljko S (2017) Vibration Based Broken Bar Detection in Induction Machine for Low Load Conditions, ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING, vol. 17, br. 1, str. 49-54 (Article) 

Backalic Todor M,Bugarski Vladimir,Kulic Filip J,Kanovic Zeljko S (2016) Adaptable Fuzzy Expert System for Ship Lock Control Support, JOURNAL OF NAVIGATION, vol. 69, br. 6, str. 1341-1356 (Article) 

Sapena-Bano Angel,Pineda-Sanchez Manuel,Puche-Panadero Ruben,Martinez-Roman Javier,Kanovic Zeljko S (2015) Low-Cost Diagnosis of Rotor Asymmetries in Induction Machines Working at a Very Low Slip Using the Reduced Envelope of the Stator Current, IEEE TRANSACTIONS ON ENERGY CONVERSION, vol. 30, br. 4, str. 1409-1419 (Article) 

Rackov Milan J,Milovancevic Milos D,Kanovic Zeljko S,Veres Miroslav,Rafa Klara,Banic Milan S,Miltenovic Aleksandar V (2014) Optimization of Hcr Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm, TEHNICKI VJESNIK-TECHNICAL GAZETTE, vol. 21, br. 4, str. 723-732 (Article) 

Kanovic Zeljko S,Bugarski Vladimir,Backalic Todor M (2014) Ship Lock Control System Optimization Using Ga, PSO and ABC: a Comparative Review, PROMET-TRAFFIC & TRANSPORTATION, vol. 26, br. 1, str. 23-31 (Review) 

Matic Dragan Z,Kanovic Zeljko S,Reljic Dejan D,Kulic Filip J,Oros Djura V,Vasic Veran V (2013) Broken Bar Detection Using Current Analysis A Case Study, 2013 9TH IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED), vol. , br. , str. 407-411 (Proceedings Paper) 

Kanovic Zeljko S,Matic Dejan,Jelicic Zoran D,Rapaic Milan R,Jakovljevic Boris B,Kapetina Mirna N (2013) Induction Motor Broken Rotor Bar Detection Using Vibration Analysis - A Case Study, 2013 9TH IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED), vol. , br. , str. 64-68 (Proceedings Paper) 

Jakovljevic Boris B,Kanovic Zeljko S,Jelicic Zoran D (2012) Induction Motor Broken Bar Detection using Vibration Signal Analysis, Principal Component Analysis and Linear Discriminant Analysis, 2012 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA), vol. , br. , str. 1686-1690 (Proceedings Paper) 

Kanovic Zeljko S,Rapaic Milan R,Jelicic Zoran D (2011) Generalized particle swarm optimization algorithm - Theoretical and empirical analysis with application in fault detection, APPLIED MATHEMATICS AND COMPUTATION, vol. 217, br. 24, str. 10175-10186 (Article) 

Rapaic Milan R,Kanovic Zeljko S,Jelicic Zoran D (2009) An Empirical Analysis of Convergence Related Particle Swarm Optimization, MATHEMATICAL METHODS AND APPLIED COMPUTING, VOL 1, vol. , br. , str. 37-42 (Proceedings Paper) 

Rapaic Milan R,Kanovic Zeljko S (2009) Time-varying PSO - convergence analysis, convergence-related parameterization and new parameter adjustment schemes, INFORMATION PROCESSING LETTERS, vol. 109, br. 11, str. 548-552 (Article) 

Rapaic Milan R,Kanovic Zeljko S,Jelicic Zoran D,Petrovacki Dusan (2008) Generalized PSO Algorithm - an Application to Lorenz System Identification by Means of Neural-Networks, NEUREL 2008: NINTH SYMPOSIUM ON NEURAL NETWORK APPLICATIONS IN ELECTRICAL ENGINEERING, PROCEEDINGS, vol. , br. , str. 30-34 (Proceedings Paper)