@ARTICLE{
author={Bugarski Vladimir,Backalic Todor M,Kanovic Zeljko S},
year={2025},
title={Fuzzy Decision Support System for Single-Chamber Ship Lock for Two Vessels},
journal={APPLIED SYSTEM INNOVATION},
volume={9},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Backalic Svetlana,Kanovic Zeljko S,Backalic Todor M},
year={2025},
title={A Case Study on Predicting Road Casualties Among Young Car Drivers in the Republic of Serbia Using Machine Learning},
journal={SAFETY},
volume={11},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Aleksandar D,Simunovic Goran,Kanovic Zeljko S,Simunovic Katica,Kocovic Vladimir,Vukelic Djordje B},
year={2025},
title={Modelling and Optimization of Surface Quality and Productivity in Turning Inconel 825 Alloy},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={24},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Curcic Jelena I,Kanovic Zeljko S,Nikolic Milutin N,Savic Srdjan Z},
year={2025},
title={Evolutionary Approach to Time-Limited Profit-Based Traveling Salesman Problem in Mobile Robotics},
journal={ADVANCES IN SERVICE AND INDUSTRIAL ROBOTICS, RAAD 2025},
volume={190},
number={},
pages={91-99},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosevic Aleksandar D,Simunovic Goran,Kanovic Zeljko S,Simunovic Katica,Santosi Zeljko Dj,Sokac Mario Z,Vukelic Djordje B},
year={2024},
title={Comprehensive Evaluation of Dimensional Deviation, Flank Wear, Surface Roughness and Material Removal Rate in Dry Turning of C45 Steel},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={22},
number={4},
pages={547-566},
document_type={Article},
} 

@ARTICLE{
author={Kovacic Ivana N,Kanovic Zeljko S,Rajs Vladimir M,Teofanov Ljiljana,Zhu Rui},
year={2024},
title={Reaching a desirable metastructure for passive vibration attenuation by using a machine learning approach},
journal={NONLINEAR DYNAMICS},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Kovacic Ivana N,Teofanov Ljiljana,Kanovic Zeljko S,Zhao Jianlei,Zhu Rui,Rajs Vladimir M},
year={2023},
title={On the influence of internal oscillators on the performance of metastructures: Modelling and tuning conditions},
journal={MECHANICAL SYSTEMS AND SIGNAL PROCESSING},
volume={205},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kovacic Ivana N,Kanovic Zeljko S},
year={2023},
title={Chladni Plate in Anechoic Chamber: Symmetry in Vibrational and Acoustic Response},
journal={SYMMETRY-BASEL},
volume={15},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovicic Goran,Milosevic Aleksandar D,Kanovic Zeljko S,Sokac Mario Z,Simunovic Goran,Savkovic Borislav S,Vukelic Djordje B},
year={2023},
title={Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate},
journal={METALS},
volume={13},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Knezevic Ivan,Rackov Milan J,Kanovic Zeljko S,Buljevic Anja,Antic Aco,Tica Milan M,Zivkovic Aleksandar M},
year={2023},
title={An Analysis of the Influence of Surface Roughness and Clearance on the Dynamic Behavior of Deep Groove Ball Bearings Using Artificial Neural Networks},
journal={MATERIALS},
volume={16},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Simunovic Katica,Kanovic Zeljko S,Saric Tomislav,Doroslovacki Ksenija,Prica Miljana Dj,Simunovic Goran},
year={2022},
title={Modelling surface roughness in finish turning as a function of cutting tool geometry using the response surface method, Gaussian process regression and decision tree regression},
journal={ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT},
volume={17},
number={3},
pages={367-380},
document_type={Article},
} 

@ARTICLE{
author={Kovacic Ivana N,Rakaric Zvonko,Kanovic Zeljko S,Rajs Vladimir M},
year={2022},
title={Metastructure with integrated internal oscillators of constant, linearly and nonlinearly varying natural frequency},
journal={FRONTIERS IN PHYSICS},
volume={10},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kanovic Zeljko S,Vukelic Djordje B,Simunovic Katica,Prica Miljana Dj,Saric Tomislav,Tadic Branko U,Simunovic Goran},
year={2022},
title={The Modelling of Surface Roughness after the Ball Burnishing Process with a High-Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression},
journal={METALS},
volume={12},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Batilovic Mehmed,Kanovic Zeljko S,Susic Zoran R,Markovic Marko Z,Bulatovic Vladimir},
year={2022},
title={Deformation Analysis: the Modified Gredod Method},
journal={GEODETSKI VESTNIK},
volume={66},
number={1},
pages={60-75},
document_type={Article},
} 

@ARTICLE{
author={Batilovic Mehmed,Djurovic Radovan,Susic Zoran R,Kanovic Zeljko S,Cekic Zoran D},
year={2022},
title={Robust Estimation of Deformation from Observation Differences Using Some Evolutionary Optimisation Algorithms},
journal={SENSORS},
volume={22},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Morozov AL,Nigmatullin RR,Agrusti G,Lino P,Maione Guido,Kanovic Zeljko S,Martinez-Roman Javier},
year={2021},
title={Microcontroller Realization of an Induction Motors Fault Detection Method based on FFT and Statistics of Fractional Moments},
journal={2021 29TH MEDITERRANEAN CONFERENCE ON CONTROL AND AUTOMATION (MED)},
volume={},
number={},
pages={65-70},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vukelic Djordje B,Simunovic Katica,Kanovic Zeljko S,Saric Tomislav,Tadic Branko U,Simunovic Goran},
year={2021},
title={Multi-objective optimization of steel AISI 1040 dry turning using genetic algorithm},
journal={NEURAL COMPUTING & APPLICATIONS},
volume={33},
number={19},
pages={12445-12475},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Kanovic Zeljko S,Sokac Mario Z,Santosi Zeljko Dj,Budak Igor M,Tadic Branko U},
year={2021},
title={Modelling of Micro-Turning Process Based on Constant Cutting Force},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={20},
number={1},
pages={146-157},
document_type={Article},
} 

@ARTICLE{
author={Batilovic Mehmed,Susic Zoran R,Kanovic Zeljko S,Markovic Marko Z,Vasic Dejan D,Bulatovic Vladimir},
year={2021},
title={Increasing efficiency of the robust deformation analysis methods using genetic algorithm and generalised particle swarm optimisation},
journal={SURVEY REVIEW},
volume={53},
number={378},
pages={193-205},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Simunovic Katica,Simunovic Goran,Saric Tomislav,Kanovic Zeljko S,Budak Igor M,Agarski Boris},
year={2020},
title={Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={266},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Knezevic Ivan,Zivkovic Aleksandar M,Rackov Milan J,Kanovic Zeljko S,Bojanic-Sejat Mirjana},
year={2019},
title={Analysis of the Impact of Lubrication on the Dynamic Behavior of Ball Bearings Using Artificial Neural Networks},
journal={ROMANIAN JOURNAL OF ACOUSTICS AND VIBRATION},
volume={16},
number={2},
pages={178-183},
document_type={Article},
} 

@ARTICLE{
author={Reljic Dejan D,Jerkan Dejan G,Kanovic Zeljko S},
year={2019},
title={Broken Rotor Bar Fault Detection Using Advanced IM Model and Artificial Intelligence Approach},
journal={PROCEEDINGS OF 18TH INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES (IEEE EUROCON 2019)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazarevic Sladjana L,Congradac Velimir D,Andjelkovic Aleksandar S,Kljajic Miroslav V,Kanovic Zeljko S},
year={2019},
title={District Heating Substation Elements Modeling for the Development of the Real-Time Model},
journal={THERMAL SCIENCE},
volume={23},
number={3},
pages={2061-2070},
document_type={Article},
} 

@ARTICLE{
author={Lazarevic Sladjana L,Congradac Velimir D,Andjelkovic Aleksandar S,Capko Darko,Kanovic Zeljko S},
year={2019},
title={A novel approach to real-time modelling of the district heating substation system using LabVIEW},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={217},
number={},
pages={360-370},
document_type={Article},
} 

@ARTICLE{
author={Matic Dragan,Kanovic Zeljko S},
year={2017},
title={Vibration Based Broken Bar Detection in Induction Machine for Low Load Conditions},
journal={ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING},
volume={17},
number={1},
pages={49-54},
document_type={Article},
} 

@ARTICLE{
author={Backalic Todor M,Bugarski Vladimir,Kulic Filip J,Kanovic Zeljko S},
year={2016},
title={Adaptable Fuzzy Expert System for Ship Lock Control Support},
journal={JOURNAL OF NAVIGATION},
volume={69},
number={6},
pages={1341-1356},
document_type={Article},
} 

@ARTICLE{
author={Sapena-Bano Angel,Pineda-Sanchez Manuel,Puche-Panadero Ruben,Martinez-Roman Javier,Kanovic Zeljko S},
year={2015},
title={Low-Cost Diagnosis of Rotor Asymmetries in Induction Machines Working at a Very Low Slip Using the Reduced Envelope of the Stator Current},
journal={IEEE TRANSACTIONS ON ENERGY CONVERSION},
volume={30},
number={4},
pages={1409-1419},
document_type={Article},
} 

@ARTICLE{
author={Rackov Milan J,Milovancevic Milos D,Kanovic Zeljko S,Veres Miroslav,Rafa Klara,Banic Milan S,Miltenovic Aleksandar V},
year={2014},
title={Optimization of Hcr Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={4},
pages={723-732},
document_type={Article},
} 

@ARTICLE{
author={Kanovic Zeljko S,Bugarski Vladimir,Backalic Todor M},
year={2014},
title={Ship Lock Control System Optimization Using Ga, PSO and ABC: a Comparative Review},
journal={PROMET-TRAFFIC & TRANSPORTATION},
volume={26},
number={1},
pages={23-31},
document_type={Review},
} 

@ARTICLE{
author={Matic Dragan Z,Kanovic Zeljko S,Reljic Dejan D,Kulic Filip J,Oros Djura V,Vasic Veran V},
year={2013},
title={Broken Bar Detection Using Current Analysis A Case Study},
journal={2013 9TH IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED)},
volume={},
number={},
pages={407-411},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kanovic Zeljko S,Matic Dejan,Jelicic Zoran D,Rapaic Milan R,Jakovljevic Boris B,Kapetina Mirna N},
year={2013},
title={Induction Motor Broken Rotor Bar Detection Using Vibration Analysis - A Case Study},
journal={2013 9TH IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED)},
volume={},
number={},
pages={64-68},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jakovljevic Boris B,Kanovic Zeljko S,Jelicic Zoran D},
year={2012},
title={Induction Motor Broken Bar Detection using Vibration Signal Analysis, Principal Component Analysis and Linear Discriminant Analysis},
journal={2012 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA)},
volume={},
number={},
pages={1686-1690},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kanovic Zeljko S,Rapaic Milan R,Jelicic Zoran D},
year={2011},
title={Generalized particle swarm optimization algorithm - Theoretical and empirical analysis with application in fault detection},
journal={APPLIED MATHEMATICS AND COMPUTATION},
volume={217},
number={24},
pages={10175-10186},
document_type={Article},
} 

@ARTICLE{
author={Rapaic Milan R,Kanovic Zeljko S,Jelicic Zoran D},
year={2009},
title={An Empirical Analysis of Convergence Related Particle Swarm Optimization},
journal={MATHEMATICAL METHODS AND APPLIED COMPUTING, VOL 1},
volume={},
number={},
pages={37-42},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rapaic Milan R,Kanovic Zeljko S},
year={2009},
title={Time-varying PSO - convergence analysis, convergence-related parameterization and new parameter adjustment schemes},
journal={INFORMATION PROCESSING LETTERS},
volume={109},
number={11},
pages={548-552},
document_type={Article},
} 

@ARTICLE{
author={Rapaic Milan R,Kanovic Zeljko S,Jelicic Zoran D,Petrovacki Dusan},
year={2008},
title={Generalized PSO Algorithm - an Application to Lorenz System Identification by Means of Neural-Networks},
journal={NEUREL 2008: NINTH SYMPOSIUM ON NEURAL NETWORK APPLICATIONS IN ELECTRICAL ENGINEERING, PROCEEDINGS},
volume={},
number={},
pages={30-34},
document_type={Proceedings Paper},
}