@ARTICLE{
author={Stankovic Srdjan B,Radovanovic Dragana D,Gajic Natasa M,Jevtic Sanja O,Stulovic Marija D,Djokic Jovana M,Kamberovic Zeljko J},
year={2026},
title={Optimization of Magnesium Chloride Hexahydrate Recovery from Serpentinite Tailings},
journal={METALS},
volume={16},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Andjic Dimitrije Z,Sokic Miroslav D,Jovanovic Aleksandar AN,Gajic Natasa M,Djokic Jovana M,Koprivica Marija R,Kamberovic Zeljko J},
year={2026},
title={Thermodynamic and Kinetic Analysis of Lead Leaching from Pretreated Pb-Ag Jarosite Sludge by Chloride Solution},
journal={METALS},
volume={16},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lu Qianqian,Rao Jian,Li Mingdong,Xiao Renwei,Kamberovic Zeljko J,Liu Qingling,Weng Wei,Zhong Shuiping},
year={2026},
title={Advances in tuning the filtration performance of the ore pulp during hydrometallurgical leaching of high-silicon materials: A review},
journal={MINERALS ENGINEERING},
volume={244},
number={},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Djokic Jovana M,Andjic Zoran M,Radovanovic Dragana D,Stulovic Marija D,Gajic Natasa M,Kamberovic Zeljko J},
year={2026},
title={Toward Sustainable Municipal Wastewater and Sludge Treatment: Simulation of Technological Processes},
journal={ENVIRONMENTAL ENGINEERING SCIENCE},
volume={43},
number={4},
pages={159-169},
document_type={Article},
} 

@ARTICLE{
author={Naglic Iztok,Leskovar Blaz,Zaky Adam,Arah Bor,Stojanovic Jovica N,Kamberovic Zeljko J,Boulet Pascal,Markoli Bostjan},
year={2026},
title={Influence of copper, calcium and strontium on the formation of quasicrystals in Al-Mn-based alloys},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={1057},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokic Jovana M,Gajic Natasa M,Radovanovic Dragana D,Stulovic Marija D,Dimitrijevic Stevan P,Vujovic Nela S,Kamberovic Zeljko J},
year={2025},
title={Alkali Fusion-Leaching Process for Non-Standard Copper Anode Slime (CAS)},
journal={METALS},
volume={15},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mitrasinovic Aleksandar M,Kamberovic Zeljko J,Yu Dawei},
year={2025},
title={Toward Zero Waste Mining: Circular Economy of Copper Slags},
journal={GLOBAL CHALLENGES},
volume={},
number={},
pages={-},
document_type={Review; Early Access},
} 

@ARTICLE{
author={Dinic Denis,Sokic Katarina,Andjic Zoran M,Kamberovic Zeljko J,Dikic Jelena K,Jevtic Sanja O},
year={2025},
title={Eco-friendly porous ceramics based on zeolite and bentonite: Preparation and assessment of adsorption efficiency toward lead, nickel, and cobalt ions},
journal={CERAMICS INTERNATIONAL},
volume={51},
number={26},
pages={49295-49306},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Andjic Zoran M,Vujovic Nela S,Ivanovic Jelena B,Jevtic Sanja O,Kamberovic Zeljko J},
year={2025},
title={Sustainable Integrated Approach to Waste Treatment in Automotive Industry: Solidification/Stabilization, Valorization, and Techno-Economic Assessment},
journal={SUSTAINABILITY},
volume={17},
number={19},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ivanovic Jelena B,Manojlovic Vaso D,Gajic Natasa M,Phuthi Nigel T,Zakonovic Jelena P,Sokic Miroslav D,Kamberovic Zeljko J},
year={2025},
title={Exergy Analysis and Machine Learning for Enhanced Eaf Steel Recycling},
journal={THERMAL SCIENCE},
volume={29},
number={3B},
pages={2167-2183},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Dikic Jelena K,Gajic Natasa M,Djokic Jovana M,Kamberovic Zeljko J,Jevtic Sanja O},
year={2024},
title={Utilization of Copper Flotation Tailings in Geopolymer Materials Based on Zeolite and Fly Ash},
journal={MATERIALS},
volume={17},
number={24},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Dragana D,Stulovic Marija D,Ranitovic Milisav B,Djokic Jovana M,Andjic Zoran M,Kamberovic Zeljko J},
year={2024},
title={Acid tar treatment-the transformation of organic waste into "organic core-inorganic shell" structure particles},
journal={JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Radovanovic Dragana D,Dikic Jelena K,Stulovic Marija D,Andjic Zoran M,Kamberovic Zeljko J,Jevtic Sanja O},
year={2023},
title={Sorption of Pb<SUP>2+</SUP>, Zn<SUP>2+</SUP>, Cu<SUP>2+</SUP> and Ni<SUP>2+</SUP> Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={29},
number={3},
pages={20-35},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Ranitovic Milisav B,Manojlovic Vaso D,Jevtic Sanja O,Gajic Natasa M,Stulovic Marija D},
year={2023},
title={Thermodynamic and kinetic analysis of jarosite Pb-Ag sludge thermal decomposition for hydrometallurgical utilization of valuable elements},
journal={JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
volume={148},
number={21},
pages={11799-11810},
document_type={Article},
} 

@ARTICLE{
author={Janosevic Milos D,Conic Vesna T,Bozic Dragana,Avramovic Ljiljana,Jovanovic Ivana,Kamberovic Zeljko J,Marjanovic Sasa R},
year={2023},
title={Indium Recovery from Jarosite Pb-Ag Tailings Waste (Part 1)},
journal={MINERALS},
volume={13},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Veljkovic Filip M,Dimitrijevic Stevan P,Dimitrijevic Silvana B,Vurdelja Borislava D,Matovic Branko Z,Stoiljkovic Milovan M,Kamberovic Zeljko J,Velickovic Suzana R},
year={2023},
title={Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system},
journal={ARABIAN JOURNAL OF CHEMISTRY},
volume={16},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petronijevic Nela S,Radovanovic Dragana D,Stulovic Marija D,Sokic Miroslav D,Jovanovic Gvozden B,Kamberovic Zeljko J,Stankovic Srdjan,Stopic Srecko R,Onjia Antonije E},
year={2022},
title={Analysis of the Mechanism of Acid Mine Drainage Neutralization Using Fly Ash as an Alternative Material: A Case Study of the Extremely Acidic Lake Robule in Eastern Serbia},
journal={WATER},
volume={14},
number={20},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokic Miroslav D,Stojanovic Jovica N,Markovic Branislav R,Kamberovic Zeljko J,Gajic Natasa M,Radosavljevic-Mihajlovic Ana S,Milojkov Dusan V},
year={2022},
title={Modification of Structural-Textural Properties of Sulfide Minerals at Polymetallic Concentrate Leaching with Sulfuric Acid and Hydrogen Peroxide Solutions},
journal={RUSSIAN JOURNAL OF NON-FERROUS METALS},
volume={63},
number={5},
pages={457-472},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Djokic Jovana M,Kamberovic Zeljko J,Marinkovic Aleksandar D,Jevtic Sanja O,Andjic Zoran M},
year={2022},
title={Investigating possibilities for synthesis of novel sorbents and catalyst carriers based on ceramics with controlled open porosity},
journal={HEMIJSKA INDUSTRIJA},
volume={76},
number={2},
pages={87-95},
document_type={Article},
} 

@ARTICLE{
author={Shwika Salem Ibrahim,Ben Omran Kaled Mohamed,Cutovic Natalija,Marinkovic Aleksandar D,Ranitovic Milisav B,Vasilski Dragana,Kamberovic Zeljko J},
year={2022},
title={Sustainable Development in WPCBS Treatment for Production of Bituminous Waterproofing Materials},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={28},
number={2},
pages={381-390},
document_type={Article},
} 

@ARTICLE{
author={Popovic Andjelka,Manojlovic Vaso D,Adnadjevic Borivoj K,Petrovic Jelena V,Kamberovic Zeljko J,Ranitovic Milisav B},
year={2022},
title={Recovery of Rare-Earth Elements from Printed Circuit Boards by Vacuum Pyrolysis and Multiple Electrostatic Separation},
journal={PROCESSES},
volume={10},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stankovic Srdjan B,Kamberovic Zeljko J,Friedrich Bernd,Stopic Srecko R,Sokic Miroslav D,Markovic Branislav R,Schippers Axel},
year={2022},
title={Options for Hydrometallurgical Treatment of Ni-Co Lateritic Ores for Sustainable Supply of Nickel and Cobalt for European Battery Industry from South-Eastern Europe and Turkey},
journal={METALS},
volume={12},
number={5},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Nikolic Vesna DR,Djokic Jovana M,Kamberovic Zeljko J,Marinkovic Aleksandar D,Jevtic Sanja O,Andjic Zoran M},
year={2022},
title={Investigating possibilities for synthesis of novel sorbents and catalyst carriers based on ceramics with controlled open porosity},
journal={HEMIJSKA INDUSTRIJA},
volume={76},
number={2},
pages={87-95},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Korac Marija S,Dotlic Milan D},
year={2022},
title={Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters},
journal={APPLIED ENERGY},
volume={307},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Silvana B,Velickovic Suzana R,Ivanovic Aleksandra T,Veljkovic Filip M,Jovanovic Milan M,Kamberovic Zeljko J,Dimitrijevic Stevan P},
year={2021},
title={Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching},
journal={INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS},
volume={101},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokic Jovana M,Radovanovic Dragana D,Nikolovski Zlatko S,Andjic Zoran M,Kamberovic Zeljko J},
year={2021},
title={Influence of Electrolyte Impurities from E-Waste Electrorefining on Copper Extraction Recovery},
journal={METALS},
volume={11},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Agrawal Munmun,Singh Randhir,Ranitovic Milisav B,Kamberovic Zeljko J,Ekberg Christian,Singh Kamalesh K},
year={2021},
title={Global market trends of tantalum and recycling methods from Waste Tantalum Capacitors: A review},
journal={SUSTAINABLE MATERIALS AND TECHNOLOGIES},
volume={29},
number={},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Djolic Maja B,Karanac Milica M,Radovanovic Dragana D,Umicevic Ana B,Kapidzic Ana M,Velickovic Zlate S,Marinkovic Aleksandar D,Kamberovic Zeljko J},
year={2021},
title={Closing the loop: As(V) adsorption onto goethite impregnated coal-combustion fly ash as integral building materials},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={303},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Gajic Natasa M,Korac Marija S,Jevtic Sanja O,Sokic Miroslav D,Stojanovic Jovica N},
year={2021},
title={Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge},
journal={MINERALS},
volume={11},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Tomic Natasa Z,Bugarcic Mladen D,Sokic Miroslav D,Marinkovic Aleksandar D,Velickovic Zlate S,Kamberovic Zeljko J},
year={2021},
title={Amino-modified hollow alumina spheres: effective adsorbent for Cd2+, Pb2+, As(V), and diclofenac removal},
journal={ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH},
volume={28},
number={21},
pages={27174-27192},
document_type={Article},
} 

@ARTICLE{
author={Stevanovic Dimitrije Z,Dimitrijevic Stevan P,Kamberovic Zeljko J,Parezanin Vladimir M,Dimitrijevic Silvana B},
year={2021},
title={Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating},
journal={MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION},
volume={72},
number={6},
pages={1010-1020},
document_type={Article},
} 

@ARTICLE{
author={Rankovic Bojan M,Sagatova Andrea,Vujcic Ivica T,Masic Slobodan B,Veljovic Djordje N,Pavicevic Vladimir P,Kamberovic Zeljko J},
year={2020},
title={Utilization of gamma and e-beam irradiation in the treatment of waste sludge from a drinking water treatment plant},
journal={RADIATION PHYSICS AND CHEMISTRY},
volume={177},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Miliciani Michele,Dimitrijevic Silvana B,Ranitovic Milisav B,Kamberovic Zeljko J},
year={2020},
title={Production of Sub-Micro Sized Silver Particles by Chemical Reduction Method in An Environmentally-Friendly Manner},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={26},
number={2},
pages={223-235},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Andjic Zoran M,Stopic Srecko R},
year={2020},
title={Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites},
journal={METALS},
volume={10},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djokic Jovana M,Jovancicevic Branimir S,Brceski Ilija D,Ranitovic Milisav B,Gajic Natasa M,Kamberovic Zeljko J},
year={2020},
title={Leaching of metastannic acid from e-waste by-products},
journal={JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT},
volume={22},
number={6},
pages={1899-1912},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Vurdelja Borislava D,Dimitrijevic Silvana B,Veljkovic Filip M,Kamberovic Zeljko J,Velickovic Suzana R},
year={2020},
title={Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys},
journal={CORROSION REVIEWS},
volume={38},
number={2},
pages={111-125},
document_type={Article},
} 

@ARTICLE{
author={Petronijevic Nela S,Stankovic Srdjan B,Radovanovic Dragana D,Sokic Miroslav D,Markovic Branislav R,Stopic Srecko R,Kamberovic Zeljko J},
year={2020},
title={Application of the Flotation Tailings as an Alternative Material for an Acid Mine Drainage Remediation: A Case Study of the Extremely Acidic Lake Robule (Serbia)},
journal={METALS},
volume={10},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokic Miroslav D,Markovic Branislav R,Stankovic Srdjan B,Kamberovic Zeljko J,Strbac Nada D,Manojlovic Vaso D,Petronijevic Nela S},
year={2019},
title={Kinetics of Chalcopyrite Leaching by Hydrogen Peroxide in Sulfuric Acid},
journal={METALS},
volume={9},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M,Ranitovic Milisav B},
year={2019},
title={Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products},
journal={JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT},
volume={21},
number={6},
pages={1402-1413},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2019},
title={Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag},
journal={INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH},
volume={16},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokic Miroslav D,Radovanovic Dragana D,Markovic Branislav R,Stojanovic Jovica N,Kamberovic Zeljko J,Petronijevic Nela S,Stankovic Srdjan B},
year={2019},
title={Treatment of the acidic effluent from a copper smelter by flotation tailings},
journal={HEMIJSKA INDUSTRIJA},
volume={73},
number={2},
pages={115-124},
document_type={Article},
} 

@ARTICLE{
author={Gajic Natasa M,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Trpcevska Jarmila,Stamatovic Mirko},
year={2019},
title={Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={84},
number={4},
pages={423-433},
document_type={Article},
} 

@ARTICLE{
author={Gajic Natasa M,Kamberovic Zeljko J,Andjic Zoran M,Trpcevska Jarmila,Plesingerova Beatrice,Korac Marija S},
year={2019},
title={Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP)},
journal={METALS},
volume={9},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Parezanin Vladimir M,Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Dimitrijevic Silvana B},
year={2018},
title={Design of Anti-Tarnish Sterling Silver Ag-Cu-Zn Alloy and Investigation of Silicon Addition Influence on Mechanical and Corrosion Characteristics},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={24},
number={3},
pages={267-274},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Dragana D,Kamberovic Zeljko J,Andjic Zoran M,Ranitovic Milisav B,Markovic Branislav R},
year={2018},
title={The effect of CaO and MgO addition and cooling rate on stability of slag obtained after jarosite and neutral leaching residue treatment in the Waelz process},
journal={PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING},
volume={54},
number={2},
pages={484-495},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Andjic Zoran M,Gajic Natasa M,Djokic Jovana M,Jevtic Sanja O},
year={2018},
title={Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards},
journal={METALS},
volume={8},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Ranitovic Milisav B,Korac Marija S,Jovanovic Nikola,Tomovic Bozidar,Gajic Natasa M},
year={2018},
title={Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace},
journal={JOURNAL OF SUSTAINABLE METALLURGY},
volume={4},
number={2},
pages={251-259},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Manasijevic Dragan M,Kamberovic Zeljko J,Dimitrijevic Silvana B,Mitric Miodrag N,Gorgievski Milan D,Mladenovic Srba A},
year={2018},
title={Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys},
journal={JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE},
volume={27},
number={4},
pages={1570-1579},
document_type={Article},
} 

@ARTICLE{
author={Radivojevic M,Pendic Jugoslav,Srejic A,Korac Marija S,Davey C,Benzonelli A,Martinon-Torres M,Jovanovic N,Kamberovic Zeljko J},
year={2018},
title={Experimental design of the Cu-As-Sn ternary colour diagram},
journal={JOURNAL OF ARCHAEOLOGICAL SCIENCE},
volume={90},
number={},
pages={106-119},
document_type={Article},
} 

@ARTICLE{
author={Sokic Miroslav D,Stojanovic Jovica N,Markovic Branislav R,Bugarcic Mladen D,Strbac Nada D,Kamberovic Zeljko J,Manojlovic Vaso D},
year={2017},
title={EFFECTS OF STRUCTURAL AND TEXTURAL GRAIN CHARACTERISTICS ON LEACHING OF SULPHIDE MINERALS FROM A POLYMETALLIC CONCENTRATE BY SODIUM NITRATE AND SULPHURIC ACID SOLUTION},
journal={HEMIJSKA INDUSTRIJA},
volume={71},
number={6},
pages={461-469},
document_type={Article},
} 

@ARTICLE{
author={Vurdelja Borislava D,Dimitrijevic Stevan P,Dimitrijevic Silvana B,Kamberovic Zeljko J,Velickovic Suzana R},
year={2017},
title={Characterization of the Ag43Cu37Zn20 alloy surface after potentiostatic polarization using LDI-TOF mass spectrometry},
journal={CORROSION REVIEWS},
volume={35},
number={6},
pages={473-481},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Tihomir M,Rusmirovic Jelena D,Tomic Natasa Z,Marinovic-Cincovic Milena T,Kamberovic Zeljko J,Tomic Milos C,Marinkovic Aleksandar D},
year={2017},
title={New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties},
journal={COMPOSITES PART B-ENGINEERING},
volume={127},
number={},
pages={1-14},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Kosec Borut,Budak Igor M},
year={2017},
title={Comparative life cycle assessment of Ni-based catalyst synthesis processes},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={162},
number={},
pages={7-15},
document_type={Article},
} 

@ARTICLE{
author={Vucinic Aleksandra S,Kamberovic Zeljko J,Ranitovic Milisav B,Kovacevic Tihomir M,Najcevic Irena D},
year={2017},
title={Analysis of the Treatment of Plastic from Electrical and Electronic Waste in the Republic of Serbia and the Testing of the Recycling Potential of Non-Metallic Fractions of Printed Circuit Boards},
journal={HEMIJSKA INDUSTRIJA},
volume={71},
number={3},
pages={271-279},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Gavrilovski Milorad P,Sokic Miroslav D,Korac Marija S},
year={2017},
title={Combustion of Metallurgical Wastes Using Secondary Aluminum Foils},
journal={COMBUSTION SCIENCE AND TECHNOLOGY},
volume={189},
number={6},
pages={1072-1089},
document_type={Article},
} 

@ARTICLE{
author={Serbula Snezana M,Stankovic Velizar D,Zivkovic Dragana T,Kamberovic Zeljko J,Gorgievski Milan D,Kalinovic Tanja S},
year={2016},
title={Characteristics of Wastewater Streams Within the Bor Copper Mine and Their Influence on Pollution of the Timok River, Serbia},
journal={Mine Water and the Environment},
volume={35},
number={4},
pages={480-485},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Agarski Boris,Kamberovic Zeljko J,Andjic Zoran M,Budak Igor M,Kosec Borut},
year={2016},
title={Multi-Criteria Analysis of Synthesis Methods for Ni-Based Catalysts},
journal={MATERIALI IN TEHNOLOGIJE},
volume={50},
number={4},
pages={553-558},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Sokic Miroslav D,Gavrilovski Milorad P,Korac Marija S},
year={2016},
title={Designing of Synergistic Waste Mixtures for Multiphase Reactive Smelting},
journal={METALS},
volume={6},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M,Mihajlovic Aleksandar M,Uljarevic Jelena B},
year={2016},
title={Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium},
journal={HEMIJSKA INDUSTRIJA},
volume={70},
number={2},
pages={137-142},
document_type={Article},
} 

@ARTICLE{
author={Radovanovic Dragana D,Kamberovic Zeljko J,Korac Marija S,Rogan Jelena R},
year={2016},
title={Solidified structure and leaching properties of metallurgical wastewater treatment sludge after solidification/stabilization process},
journal={JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING},
volume={51},
number={1},
pages={34-43},
document_type={Article},
} 

@ARTICLE{
author={Cirkovic Milorad,Bugarin Mile M,Trujic Vlastimir K,Kamberovic Zeljko J},
year={2015},
title={Principles of Improvement the Energy Efficiency in Pyrometallurgy of Copper: Utilization the Secondary Heat Energy of Intermediate Products},
journal={Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015)},
volume={},
number={},
pages={283-292},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Rajcic-Vujasinovic Mirjana M,Kamberovic Zeljko J,Dimitrijevic Silvana B,Grekulovic Vesna J,Trumic Biserka T,Ivanovic Aleksandra T},
year={2015},
title={The Corrosion Behavior of an Ag43Cu37Zn20 Alloy in the Natural Seawaters},
journal={MATERIALS TRANSACTIONS},
volume={56},
number={12},
pages={2088-2091},
document_type={Article},
} 

@ARTICLE{
author={Jovicevic Niko,Cvetkovic Vesna S,Kamberovic Zeljko J,Barudzija Tanja S},
year={2015},
title={Aluminium Underpotential Deposition from AlCl3+NaCl Melts and Alloy Formation with Vanadium Substrate},
journal={INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE},
volume={10},
number={11},
pages={8959-8972},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Stevan P,Andjic Zoran M,Kamberovic Zeljko J,Dimitrijevic Silvana B,Vukovic Nikola S},
year={2014},
title={Recycling of silver-plated brass for production of high purity copper and ultrafine silver powder for electric contacts},
journal={BULGARIAN CHEMICAL COMMUNICATIONS},
volume={46},
number={4},
pages={814-824},
document_type={Article},
} 

@ARTICLE{
author={Rajic Dusan S,Kamberovic Zeljko J,Karkalic Radovan M,Vitorovic-Todorovic Maja D,Ivankovic Negovan D,Bauk Sonja Dj,Jovanovic Dalibor B},
year={2014},
title={A comparative analysis of the selected properties of protective filtering masks},
journal={HEMIJSKA INDUSTRIJA},
volume={68},
number={4},
pages={457-464},
document_type={Article},
} 

@ARTICLE{
author={Manojlovic Vaso D,Kamberovic Zeljko J,Sokic Miroslav D,Gulisija Zvonko P,Matkovic Vladislav Lj},
year={2014},
title={Optimization of the Recycling Processes for Magnesium from a Highly Contaminated Waste},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={4},
pages={571-575},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Sokic Miroslav D,Maksimovic Vesna M},
year={2014},
title={Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams},
journal={INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS},
volume={21},
number={8},
pages={806-812},
document_type={Article},
} 

@ARTICLE{
author={Ranitovic Milisav B,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P,Issa Hatim,Andjic Zoran M},
year={2014},
title={Investigation of Possibility for Stabilization and Valorization of Electric Arc Furnace Dust and Glass From Electronic Waste},
journal={SCIENCE OF SINTERING},
volume={46},
number={1},
pages={83-93},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2014},
title={Wear Resistance and Dynamic Fracture Toughness of Hypoeutectic High-Chromium White Cast Iron Alloyed with Niobium and Vanadium},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={3},
pages={343-348},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S},
year={2014},
title={Solidification of FE19CR2.9CRV Alloy},
journal={JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY},
volume={50},
number={1},
pages={27-30},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Korac Marija S,Sokic Miroslav D},
year={2014},
title={Synthesis of Alpha-Al2O3 Based Foams with Improved Properties as Catalyst Carriers},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={1},
pages={45-50},
document_type={Article},
} 

@ARTICLE{
author={Rajic Dusan S,Kamberovic Zeljko J,Karkalic Radovan M,Ivankovic Negovan D,Senic Zeljko B},
year={2013},
title={Thermal resistance testing of standard and protective filtering military garment on the burning napalm mixture},
journal={HEMIJSKA INDUSTRIJA},
volume={67},
number={6},
pages={941-950},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Jordovic Branka A},
year={2013},
title={Effect of Niobium and Vanadium Additions on the As-Cast Microstructure and Properties of Hypoeutectic Fe-Cr-C Alloy},
journal={ISIJ INTERNATIONAL},
volume={53},
number={12},
pages={2160-2166},
document_type={Article},
} 

@ARTICLE{
author={Stulovic Marija D,Ivsic-Bajceta Dragana,Ristic Mirjana Dj,Kamberovic Zeljko J,Korac Marija S,Andjic Zoran M},
year={2013},
title={Leaching Properties of Secondary Lead Slag Stabilized/Solidified with Cement and Selected Additives},
journal={ENVIRONMENT PROTECTION ENGINEERING},
volume={39},
number={3},
pages={149-163},
document_type={Article},
} 

@ARTICLE{
author={Dervisevic Irma,Minic Dusko M,Kolarevic Milan,Kamberovic Zeljko J,Ristic Mirjana Dj},
year={2013},
title={Study on Properties of Alloys with Gallium, Antimony and Zinc from Recycling},
journal={ECOLOGICAL CHEMISTRY AND ENGINEERING S-CHEMIA I INZYNIERIA EKOLOGICZNA S},
volume={20},
number={3},
pages={579-599},
document_type={Article},
} 

@ARTICLE{
author={Ivsic-Bajceta Dragana,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={A solidification/stabilization process for wastewater treatment sludge from a primary copper smelter},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={78},
number={5},
pages={725-739},
document_type={Article},
} 

@ARTICLE{
author={Dervisevic Irma,Minic Dusko M,Kamberovic Zeljko J,Cosovic Vladan R,Ristic Mirjana Dj},
year={2013},
title={Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic},
journal={ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH},
volume={20},
number={6},
pages={4278-4292},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={Correlation of microstructure with the wear resistance and fracture toughness of white cast iron alloys},
journal={METALS AND MATERIALS INTERNATIONAL},
volume={19},
number={3},
pages={473-481},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S,Gavrilovski Milorad P},
year={2013},
title={Microstructure and mechanical properties of Fe-Cr-C-Nb white cast irons},
journal={MATERIALS & DESIGN},
volume={47},
number={},
pages={41-48},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Kamberovic Zeljko J,Gavrilovski Milorad P,Korac Marija S,Andjic Zoran M},
year={2013},
title={MODELING OF METALLURGICAL PROPERTIES OF SINTER MIXTURES OF NONSTANDARD RAW IRON-BEARING MATERIALS},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={},
pages={5-8},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Korac Marija S,Gavrilovski Milorad P,Kamberovic Zeljko J},
year={2013},
title={Possibility of Carbon Steel Eafd Solidification/Stabilization in Concrete},
journal={METALURGIA INTERNATIONAL},
volume={18},
number={},
pages={182-188},
document_type={Article},
} 

@ARTICLE{
author={Jovicevic Niko,Cvetkovic Vesna S,Kamberovic Zeljko J,Jovicevic Jovan N},
year={2013},
title={Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate},
journal={METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE},
volume={44},
number={1},
pages={106-114},
document_type={Article},
} 

@ARTICLE{
author={Markovic Srdjan V,Stakic M,Manasijevic Srecko,Kamberovic Zeljko J,Radisa Radomir,Korac Marija S},
year={2012},
title={Examination of the Microstructure and Properties of Low-Frequency Electromagnetic Casting 6060 Aluminum Alloy Billets and Bars},
journal={PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY},
volume={49},
number={12},
pages={736-755},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L,Kamberovic Zeljko J},
year={2012},
title={Chemical Composition and Morphology of M7C3 Eutectic Carbide in High Chromium White Cast Iron Alloyed with Vanadium},
journal={ISIJ INTERNATIONAL},
volume={52},
number={12},
pages={2200-2204},
document_type={Article},
} 

@ARTICLE{
author={Jovicevic Niko,Cvetkovic Vesna S,Kamberovic Zeljko J,Jovicevic Jovan N},
year={2012},
title={Al-Zn Alloy Formation by Aluminium Underpotential Deposition from AlCl3+NaCl Melts on Zinc Substrate},
journal={INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE},
volume={7},
number={11},
pages={10380-10393},
document_type={Article},
} 

@ARTICLE{
author={Issa Hatim,Korac Marija S,Gavrilovski Milorad P,Pavlovic Milan D,Kamberovic Zeljko J},
year={2012},
title={Possibility of Carbon Steel EAFD Solidification/Stabilization in Concrete},
journal={REVISTA DE CHIMIE},
volume={63},
number={10},
pages={1008-1012},
document_type={Article},
} 

@ARTICLE{
author={Cirkovic Milorad,Kamberovic Zeljko J,Trujic Vlastimir K},
year={2012},
title={Laboratory Testing Results of Kinetics and Processing Technology of the Polymetallic Sulphide Concentrate Blagojev Kamen - Serbia},
journal={TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES},
volume={},
number={},
pages={157-164},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Cirkovic Milorad,Trujic Vlastimir K,Kamberovic Zeljko J},
year={2012},
title={Industrial Use of a New Ultrasound Spray for Coolin and Wet Gas Treatment in the Pyrometallurgical Processes},
journal={TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES},
volume={},
number={},
pages={133-140},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djokic Jelena V,Minic Dusko M,Kamberovic Zeljko J,Petkovic Desimir},
year={2012},
title={Impact Analysis of Airborn Pollution Due to Magnesium Slag Deposit and Climatic Changes Condition},
journal={ECOLOGICAL CHEMISTRY AND ENGINEERING S-CHEMIA I INZYNIERIA EKOLOGICZNA S},
volume={19},
number={3},
pages={439-450},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Sokic Miroslav D,Matkovic Vladislav Lj,Andjic Zoran M,Korac Marija S,Nikolic Vesna DR},
year={2012},
title={Effects of Additives on Nickel (II)-Chloride Hydrogen Reduction for Production of Nanocomposite Catalysts},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={5},
pages={37-41},
document_type={Article},
} 

@ARTICLE{
author={Romhanji Endre L,Filipovic Mirjana M,Kamberovic Zeljko J},
year={2012},
title={Kinetics of Internal Oxidation in Ag-6Sn-2In-1Te-0.2Ni and Ag-6Sn-0.6Cu-1Bi-0.2Ni Type Alloys},
journal={METALS AND MATERIALS INTERNATIONAL},
volume={18},
number={1},
pages={171-176},
document_type={Article},
} 

@ARTICLE{
author={Djokic Jelena V,Minic Dusko M,Kamberovic Zeljko J},
year={2012},
title={Reuse of Metallurgical Slag From the Silicothermic Magnesium Production and Secondary Lead Metallurgy},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={3},
pages={46-52},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2012},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={4},
pages={8-13},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Raic Karlo T,Filipovic Mirjana M,Andjic Zoran M,Korac Marija S},
year={2011},
title={The Mechanism and Kinetics of the Tungsten (VI)-Oxide Reduction in the Vertical Tube Reactor},
journal={METALURGIA INTERNATIONAL},
volume={16},
number={12},
pages={52-57},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Kamberovic Zeljko J,Korac Marija S},
year={2011},
title={Solidification of High Chromium White Cast Iron Alloyed with Vanadium},
journal={MATERIALS TRANSACTIONS},
volume={52},
number={3},
pages={386-390},
document_type={Article},
} 

@ARTICLE{
author={Kamberovic Zeljko J,Filipovic Dusica,Raic Karlo T,Tasic Milos,Andjic Zoran M,Gavrilovski Milorad P},
year={2011},
title={Reduction of Ultra-fine Tungsten Powder with Tungsten (VI) Oxide in a Vertical Tube Reactor},
journal={MATERIALI IN TEHNOLOGIJE},
volume={45},
number={1},
pages={27-32},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Andjic Zoran M,Filipovic Mirjana M,Tasic Milos},
year={2010},
title={Sintered Materials Based on Copper and Alumina Powders Synthesized by a Novel Method},
journal={SCIENCE OF SINTERING},
volume={42},
number={1},
pages={81-90},
document_type={Article},
} 

@ARTICLE{
author={Filipovic Mirjana M,Romhanji Endre L,Kamberovic Zeljko J,Korac Marija S},
year={2009},
title={Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys},
journal={MATERIALS TRANSACTIONS},
volume={50},
number={10},
pages={2488-2492},
document_type={Article},
} 

@ARTICLE{
author={Dimitrov Aleksandar T,Paunovic Perica,Popovski Orce,Slavkov Dragan,Kamberovic Zeljko J,Hadzi-Jordanov Svetomir},
year={2009},
title={Effect of non-stationary current regimes on the morphology of silver electrodeposits},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={74},
number={3},
pages={279-289},
document_type={Article},
} 

@ARTICLE{
author={Radovic Nenad A,Kamberovic Zeljko J,Panias Dimitrios},
year={2009},
title={Cleaner Metallurgical Industry in Serbia: A Road To the Sustainable Development},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={15},
number={1},
pages={1-4},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Kamberovic Zeljko J,Tasic Milos,Gavrilovski Milorad P},
year={2008},
title={Nanocomposite Powders For New Contact Materials Based On Copper And Alumina},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={14},
number={4},
pages={215-218},
document_type={Article},
} 

@ARTICLE{
author={Korac Marija S,Andjic Zoran M,Tasic Milos,Kamberovic Zeljko J},
year={2007},
title={Sintering of Cu-Al2O3 nano-composite powders produced by a thermochemical route},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={72},
number={11},
pages={1115-1125},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Jelena,Stopic Srecko R,Friedrich Bernd,Kamberovic Zeljko J},
year={2007},
title={Selective removal of heavy metals from metal-bearing wastewater in a cascade line reactor},
journal={ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH},
volume={14},
number={7},
pages={518-522},
document_type={Article},
} 

@ARTICLE{
author={Andjic Zoran M,Korac Marija S,Kamberovic Zeljko J,Vujovic Aleksandar C,Tasic Milos},
year={2007},
title={Analysis of the properties of a Cu-Al2O3 sintered system based on ultra fine and nanocomposite powders},
journal={SCIENCE OF SINTERING},
volume={39},
number={2},
pages={145-152},
document_type={Article},
} 

@ARTICLE{
author={Zivkovic Dragana T,Manasijevic Dragan M,Kamberovic Zeljko J,Cocic Mira B,Marjanovic Bata R},
year={2007},
title={Thermodynamic and structural investigation of the Ag-In-Sb system},
journal={METALURGIJA},
volume={46},
number={3},
pages={151-156},
document_type={Article},
} 

@ARTICLE{
author={Andjic Zoran M,Korac Marija S,Tasic Milos,Raic Karlo T,Kamberovic Zeljko J},
year={2006},
title={The synthesis of ultrafine and nanocomposite powders based on copper, silver anal alumina},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={44},
number={3},
pages={145-150},
document_type={Article},
} 

@ARTICLE{
author={Vracar Rajko Z,Vuckovic Natasa,Kamberovic Zeljko J},
year={2003},
title={Leaching of copper(I) sulphide by sulphuric acid solution with addition of sodium nitrate},
journal={HYDROMETALLURGY},
volume={70},
number={1-3},
pages={143-151},
document_type={Article},
} 

@ARTICLE{
author={Sinadinovic Dragan,Vracar Rajko Z,Kamberovic Zeljko J},
year={2001},
title={On the aqueous oxidation of polymetallic Cu-Zn-Pb gold-bearing sulphide ore in an autoclave},
journal={CIM BULLETIN},
volume={94},
number={1051},
pages={123-128},
document_type={Article},
} 

@ARTICLE{
author={Vracar Rajko Z,Vukcevic SM,Parezanovic IS,Kamberovic Zeljko J},
year={2001},
title={The study of iron chlorination from bauxite for its enrichment},
journal={SCANDINAVIAN JOURNAL OF METALLURGY},
volume={30},
number={2},
pages={84-90},
document_type={Article},
} 

@ARTICLE{
author={Ilic Ilija B,Stopic Srecko R,Cerovic Katarina P,Kamberovic Zeljko J},
year={2000},
title={Study of chlorination of nickel silicate by gaseous chlorine and calcium chloride in the presence of active additives},
journal={SCANDINAVIAN JOURNAL OF METALLURGY},
volume={29},
number={1},
pages={9-16},
document_type={Article},
} 

@ARTICLE{
author={Ilic Ilija B,Stopic Srecko R,Cerovic Katarina P,Kamberovic Zeljko J},
year={2000},
title={Study of chlorination of nickel ferrite by gaseous chlorine and calcium chloride in the presence of active additives},
journal={SCANDINAVIAN JOURNAL OF METALLURGY},
volume={29},
number={1},
pages={1-8},
document_type={Article},
} 

