@ARTICLE{
author={Babincev Ljiljana M,Jovic Srdjan},
year={2023},
title={Determination of the amount of volatile acids in oxidized wines and neutralization of these by using chemical reagents and biological materials},
journal={BIOMASS CONVERSION AND BIOREFINERY},
volume={13},
number={6},
pages={4717-4725},
document_type={Article},
} 

@ARTICLE{
author={Markovic Ljubo P,Milic-Markovic Ljiljana,Jovic Srdjan,Milovancevic Milos D},
year={2022},
title={Evaluation of Alternative Solutions of General Design of Railway Lines with Regards to Environmental Protection},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={6},
pages={99-113},
document_type={Article},
} 

@ARTICLE{
author={Gvozdovic Nikola,Bozic-Tomic Kristina M,Markovic Ljubo P,Milic-Markovic Ljiljana,Koprivica Suzana,Kovacevic Miljan,Jovic Srdjan},
year={2022},
title={Application of the Multi-Criteria Optimization Method to Repair Landslides with Additional Soil Collapse},
journal={AXIOMS},
volume={11},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Radojicic Vladimir T,Radulovic Rada M,Taric Mirsad,Jovic Srdjan},
year={2022},
title={The influence of the steel fibers on improvement of mechanical characteristic of concrete},
journal={MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES},
volume={50},
number={8},
pages={2929-2939},
document_type={Article},
} 

@ARTICLE{
author={Camagic Ivica R,Jovic Srdjan,Makragic Slobodan,Zivkovic Predrag V,Burzic Zijah H},
year={2021},
title={Influence of Temperature and Operation Time on the Fatigue Strength and Microstructure of Welded Joints of A-387Gr.B Steel},
journal={MATERIALS SCIENCE},
volume={57},
number={1},
pages={86-93},
document_type={Article},
} 

@ARTICLE{
author={Cukaric Aleksandar,Camagic Ivica R,Dutina Velimir,Milkic Zarko,Jovic Srdjan},
year={2021},
title={Retracted: Parameters ranking based on influence on dynamical strength of ultra-high performance concrete by neuro fuzzy logic},
journal={STRUCTURAL CONCRETE},
volume={22},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Nenad A,Bjelic Slobodan,Markovic Filip,Markovic Marko,Jovic Srdjan},
year={2021},
title={Theoretical method for determination of the impact of parasitic torques from the equivalent scheme of induction machines fed by PWM inverter},
journal={MEASUREMENT},
volume={169},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vasic Nebojsa,Kilibarda Milorad,Andrejic Milan M,Jovic Srdjan},
year={2021},
title={Satisfaction is a function of users of logistics services in e-commerce},
journal={TECHNOLOGY ANALYSIS & STRATEGIC MANAGEMENT},
volume={33},
number={7},
pages={813-828},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan},
year={2021},
title={Adaptive neuro-fuzzy prediction of flow pattern and gas hold-up in bubble column reactors},
journal={ENGINEERING WITH COMPUTERS},
volume={37},
number={3},
pages={1723-1734},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Julija,Statkic Sasa Z,Grbic Mirko,Dutina Velimir,Jovic Srdjan},
year={2021},
title={Impactful factors for inorganic sulfur reduction of coal by adaptive neurofuzzy technique},
journal={STRUCTURAL CONCRETE},
volume={22},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Babic Lidija,Miskovic Aleksandar Z,Cirkovic Bogdan S,Camagic Ivica R},
year={2021},
title={Ranking of the most influential parameters for compressive strength of no-slump concrete prediction by neuro-fuzzy logic},
journal={STRUCTURAL CONCRETE},
volume={22},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Radulovic Rada M,Kovacevic Miljan,Bozovic Ruzica T,Sarkocevic Zivce S},
year={2021},
title={Estimation of important variables for strength of concrete with high performance based on neuro fuzzy logic approach},
journal={STRUCTURAL CONCRETE},
volume={22},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Markovic Marko,Djurovic Strahinja,Zivkovic Predrag V,Radojkovic Mladen},
year={2021},
title={Sensitivity analyzing of compressive strength of concrete aggregates by adaptive neuro fuzzy approach},
journal={STRUCTURAL CONCRETE},
volume={22},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Babincev Ljiljana M,Guresic Dejan M,Draskovic Nenad S,Jovic Srdjan},
year={2020},
title={Measurement of heavy metals in industrial wastewater by filters based on perlon and wool},
journal={JOURNAL OF WATER PROCESS ENGINEERING},
volume={37},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Regodic Dusan,Spalevic Petar C,Milic Dragisa,Jovic Srdjan,Regodic Radomir},
year={2020},
title={Application Integration Method for the Calculation of Flight Projectile},
journal={JOURNAL OF THE ASTRONAUTICAL SCIENCES},
volume={67},
number={4},
pages={1189-1205},
document_type={Article},
} 

@ARTICLE{
author={Statkic Sasa Z,Jovanovic Bojan,Micic Aleksandar D,Arsic Nebojsa B,Jovic Srdjan},
year={2020},
title={Adaptive neuro fuzzy selection of the most important factors for photovoltaic pumping system performance prediction},
journal={JOURNAL OF BUILDING ENGINEERING},
volume={30},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Dusan M,Stevic Dragan M,Milosevic Mimica R,Jovic Srdjan},
year={2020},
title={Modeling and simulation of the spectral reflectance for the natural environment: Area pester plateau},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={174},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Galjak Jovana S,Djokic Jelena V,Guresic Dejan M,Jovic Srdjan,Milentijevic Gordana O},
year={2020},
title={Evaluation of acid mine drainage kinetics in the lead-zinc mine},
journal={ARABIAN JOURNAL OF GEOSCIENCES},
volume={13},
number={10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan},
year={2020},
title={Prediction of aerodynamics performance of continuously variable-speed wind turbine by adaptive neuro-fuzzy methodology},
journal={ENGINEERING WITH COMPUTERS},
volume={36},
number={2},
pages={597-602},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Arsic Nebojsa B,Maric Ljubomir M,Petkovic Dalibor},
year={2020},
title={RETRACTION: Estimation of contact forces of underactuated robotic finger using soft computing methods (Retraction of Vol 30, Pg 891, 2019)},
journal={JOURNAL OF INTELLIGENT MANUFACTURING},
volume={31},
number={3},
pages={797-797},
document_type={Retraction},
} 

@ARTICLE{
author={Maksimovic Goran,Jovic Srdjan,Jovovic David,Jovovic Marina},
year={2019},
title={RETRACTION: Analyses of Economic Development Based on Different Factors (Retraction of Vol 53, Pg 1103, 2019)},
journal={COMPUTATIONAL ECONOMICS},
volume={54},
number={4},
pages={1539-1539},
document_type={Retraction},
} 

@ARTICLE{
author={Pecanin Emir,Spalevic Petar C,Mekic Edis S,Jovic Srdjan,Milovanovic Ivan},
year={2019},
title={E-learning engineers based on constructive and multidisciplinary approach},
journal={COMPUTER APPLICATIONS IN ENGINEERING EDUCATION},
volume={27},
number={6},
pages={1544-1554},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Guresic Dejan M,Babincev Ljiljana M,Draskovic Nenad S,Dekic Vidoslav S},
year={2019},
title={Comparative efficacy of machine-learning models in prediction of reducing uncertainties in biosurfactant production},
journal={BIOPROCESS AND BIOSYSTEMS ENGINEERING},
volume={42},
number={10},
pages={1695-1699},
document_type={Article},
} 

@ARTICLE{
author={Lazarevic Dragan D,Nedic Bogdan P,Jovic Srdjan,Sarkocevic Zivce S,Blagojevic Milan R},
year={2019},
title={Optical inspection of cutting parts by 3D scanning},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={531},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Statkic Sasa Z,Jeftenic Ilija B,Bebic Milan Z,Milkic Zarko,Jovic Srdjan},
year={2019},
title={Reliability assessment of the single motor drive of the belt conveyor on Drmno open-pit mine},
journal={INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS},
volume={113},
number={},
pages={393-402},
document_type={Article},
} 

@ARTICLE{
author={Vuckovic Dragan,Jovic Srdjan,Bozovic Ruzica T,Dzamic Vladimir,Kicovic Dusan},
year={2019},
title={Potential of neuro-fuzzy methodology for forecasting of outdoor thermal comfort index at urban open spaces},
journal={URBAN CLIMATE},
volume={28},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kicovic Dusan,Vuckovic Dragan,Markovic Dusan,Jovic Srdjan},
year={2019},
title={Assessment of visitors' thermal comfort based on physiologically equivalent temperature in open urban areas},
journal={URBAN CLIMATE},
volume={28},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Novkovic-Cvetkovic Biljana M,Gligorijevic Milan M,Petkovic Dalibor,Jovic Srdjan,Milovancevic Milos D,Nikolic Vlastimir D},
year={2019},
title={Evaluation of information and communication technology sector in the teaching process and strategic collaboration between universities and industry},
journal={COMPUTER APPLICATIONS IN ENGINEERING EDUCATION},
volume={27},
number={3},
pages={653-662},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan},
year={2019},
title={Appraisal of laser engraving module by computational intelligence approach},
journal={OPTIK},
volume={183},
number={},
pages={766-774},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Kalaba Dragan V,Zivkovic Predrag V,Virijevic Aleksandar},
year={2019},
title={Potential of adaptive neuro-fuzzy methodology for investigation of heat transfer enhancement of a minichannel heat sink},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={523},
number={},
pages={516-524},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Radovic Aleksandar,Sarkocevic Zivce S,Petkovic Dalibor,Alizamir Meysam},
year={2019},
title={Expression of Concern: Estimation of the laser cutting operating cost by support vector regression methodology},
journal={APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING},
volume={125},
number={5},
pages={-},
document_type={Editorial Material},
} 

@ARTICLE{
author={Radivojevic Nikola Z,Cvijanovic Drago V,Sekulic Dejan B,Pavlovic Dejana M,Jovic Srdjan,Maksimovic Goran},
year={2019},
title={Econometric model of non-performing loans determinants},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={520},
number={},
pages={481-488},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Cukaric Aleksandar,Raicevic Andjelija M,Tomov Pancho},
year={2019},
title={Assessment of electronic system for e-patent application and economic growth prediction},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={520},
number={},
pages={93-105},
document_type={Article},
} 

@ARTICLE{
author={Borovic Vladan D,Spalevic Petar C,Cisar Petar,Rancic Dejan D,Jovic Srdjan},
year={2019},
title={Supervisory system for physical objects spatial location detection},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={521},
number={},
pages={781-795},
document_type={Article},
} 

@ARTICLE{
author={Borovic Vladan D,Spalevic Petar C,Jovic Srdjan,Jerkovic Damir D,Drasute Vida,Rancic Dejan D},
year={2019},
title={Hail suppression activities using TETRA-based sensor network},
journal={SENSOR REVIEW},
volume={39},
number={2},
pages={171-177},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Goran,Jovic Srdjan,Jovovic David,Jovovic Marina},
year={2019},
title={Analyses of Economic Development Based on Different Factors},
journal={COMPUTATIONAL ECONOMICS},
volume={53},
number={3},
pages={1103-1109},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Arsic Nebojsa B,Maric Ljubomir M,Petkovic Dalibor},
year={2019},
title={Estimation of contact forces of underactuated robotic finger using soft computing methods},
journal={JOURNAL OF INTELLIGENT MANUFACTURING},
volume={30},
number={2},
pages={891-903},
document_type={Article},
} 

@ARTICLE{
author={Bandjur Djoko V,Jaksic Branimir S,Bandjur Milos V,Jovic Srdjan},
year={2019},
title={An analysis of energy efficiency in Wireless Sensor Networks (WSNs) applied in smart agriculture},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={156},
number={},
pages={500-507},
document_type={Article},
} 

@ARTICLE{
author={Vukojevic Vukoje,Jovic Srdjan,Nedeljkovic Blagoje,Sedmak Aleksandar S,Blacic Ivo D},
year={2019},
title={The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={13},
number={1},
pages={82-88},
document_type={Article},
} 

@ARTICLE{
author={Rakic Goran S,Milenkovic Dragana J,Vujovic Sonja M,Vujovic Tanja M,Jovic Srdjan},
year={2019},
title={Information system for e-GDP based on computational intelligence approach},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={513},
number={},
pages={418-423},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Smigic-Miladinovic Jasmina,Micic Radmila D,Markovic Sanja,Rakic Goran S},
year={2019},
title={Analysing of exchange rate and gross domestic product (GDP) by adaptive neuro fuzzy inference system (ANFIS)},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={513},
number={},
pages={333-338},
document_type={Article},
} 

@ARTICLE{
author={Predic Bratislav B,Ilic Milos N,Spalevic Petar C,Trajkovic Slavisa,Jovic Srdjan,Stanic Andrija},
year={2018},
title={Data mining based tool for early prediction of possible fruit pathogen Check for infection},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={154},
number={},
pages={314-319},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Djordjevic Z,Lazarevic Dragan D},
year={2018},
title={Analysis of Laser Cutting Operating Cost Using Computational Intelligence},
journal={LASERS IN ENGINEERING},
volume={40},
number={4-6},
pages={405-409},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Jovanovic Bojan,Ristovski Aleksandar M,Lazovic Dejan D},
year={2018},
title={Using the Soft Computing Method to Analyse and Model Laser Beam Welding},
journal={LASERS IN ENGINEERING},
volume={40},
number={4-6},
pages={395-403},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Skulic Aleksandar,Lazarevic Mihailo P},
year={2018},
title={Analysis of the Laser Forming of Shaped Surfaces Using the Adaptive Neuro-fuzzy Technique},
journal={LASERS IN ENGINEERING},
volume={40},
number={4-6},
pages={333-340},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Lazarevic Mihailo P,Sarkocevic Zivce S,Lazarevic Dragan D},
year={2018},
title={Prediction of Laser Formed Shaped Surface Characteristics Using Computational Intelligence Techniques},
journal={LASERS IN ENGINEERING},
volume={40},
number={4-6},
pages={239-251},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vlastimir D,Kaljevic Jelena,Jovic Srdjan,Petkovic Dalibor,Milovancevic Milos D,Dimitrov Ljubomir,Dachkinov Pancho},
year={2018},
title={Survey of quality models of e-learning systems},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={511},
number={},
pages={324-330},
document_type={Article},
} 

@ARTICLE{
author={Lazov Lyubomir,Nikolic Vlastimir D,Jovic Srdjan,Milovancevic Milos D,Deneva Heristina,Teirumenieka Erika,Arsic Nebojsa B},
year={2018},
title={Evaluation of laser cutting process with auxiliary gas pressure by soft computing approach},
journal={INFRARED PHYSICS & TECHNOLOGY},
volume={91},
number={},
pages={137-141},
document_type={Article},
} 

@ARTICLE{
author={Petkovic Dalibor,Jovic Srdjan,Golubovic Zoran V},
year={2018},
title={Object-oriented modeling approach of universal education software},
journal={COMPUTER APPLICATIONS IN ENGINEERING EDUCATION},
volume={26},
number={3},
pages={543-558},
document_type={Article},
} 

@ARTICLE{
author={Ilic Milos N,Ilic Sinisa S,Jovic Srdjan,Panic Stefan R},
year={2018},
title={Early cherry fruit pathogen disease detection based on data mining prediction},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={150},
number={},
pages={418-425},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Nedeljkovic Blagoje,Golubovic Zoran V,Kostic Nikola},
year={2018},
title={Evolutionary algorithm for reference evapotranspiration analysis},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={150},
number={},
pages={1-4},
document_type={Article},
} 

@ARTICLE{
author={Vujovic Tanja M,Petkovic Zdravka,Pavlovic Milos,Jovic Srdjan},
year={2018},
title={Economic growth based in carbon dioxide emission intensity},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={506},
number={},
pages={179-185},
document_type={Article},
} 

@ARTICLE{
author={Tanackov Ilija J,Deretic Nemanja N,Bogdanovic Vuk Z,Ruskic Nenad D,Jovic Srdjan},
year={2018},
title={Safety time in critical gap of left turn manoeuvre from priority approach at TWSC unsignalized intersections},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={505},
number={},
pages={1196-1211},
document_type={Article},
} 

@ARTICLE{
author={Milovancevic Milos D,Nikolic Vlastimir D,Petkovic Dalibor,Vracar Ljubomir M,Veg Emil A,Tomic Natalija,Jovic Srdjan},
year={2018},
title={Vibration analyzing in horizontal pumping aggregate by soft computing},
journal={MEASUREMENT},
volume={125},
number={},
pages={454-462},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan,Camagic Ivica R,Radojkovic Mladen,Stanojevic Nenad Z},
year={2018},
title={Measuring of cutting forces and chip shapes based on different machining parameters},
journal={SENSOR REVIEW},
volume={38},
number={3},
pages={387-390},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan,Stanojevic Nenad Z,Marsenic Mladen,Pejovic Branko,Nedic Bogdan P},
year={2018},
title={Estimation of tool wear according to cutting forces during machining procedure},
journal={SENSOR REVIEW},
volume={38},
number={2},
pages={176-180},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Vasic Predrag S,Jaksic Tatjana R},
year={2018},
title={Sensorless estimation of lake level by soft computing approach},
journal={SENSOR REVIEW},
volume={38},
number={1},
pages={117-119},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan,Tasic Srdjan,Vulovic Aleksa,Jovanovic Milivoje},
year={2018},
title={Temperature detection in cutting zone for different forms of chip shapes during machining process},
journal={SENSOR REVIEW},
volume={38},
number={1},
pages={102-105},
document_type={Article},
} 

@ARTICLE{
author={Swhli Khaled Mohamed Himair,Jovic Srdjan,Arsic Nebojsa B,Spalevic Petar C},
year={2018},
title={Detection and evaluation of heating load of building by machine learning},
journal={SENSOR REVIEW},
volume={38},
number={1},
pages={99-101},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Miljkovic Milica,Ivanovic Miljan,Saranovic Milena,Arsic Milena},
year={2017},
title={Prostate Cancer Probability Prediction By Machine Learning Technique},
journal={CANCER INVESTIGATION},
volume={35},
number={10},
pages={647-651},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Lazarevic Dragan D,Vulovic Aleksa},
year={2017},
title={Analyzing of the sensitivity of chip formation during machining process},
journal={SENSOR REVIEW},
volume={37},
number={4},
pages={448-450},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Golubovic Zoran V,Stojanovic Jovan},
year={2017},
title={Wood bonding strength sensitivity estimation and power consumption prediction in wood machining process by artificial intelligence methods},
journal={SENSOR REVIEW},
volume={37},
number={4},
pages={444-447},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Makragic Slobodan,Jovanovic Milivoje},
year={2017},
title={Parameters influence of laser forming on shaped surface by soft computing technique},
journal={OPTIK},
volume={142},
number={},
pages={451-454},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Goran,Milosavljevic Valentina,Cirkovic Bratislav M,Milosevic Bozidar N,Jovic Srdjan,Alizamir Meysam},
year={2017},
title={Analyzing of economic growth based on electricity consumption from different sources},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={484},
number={},
pages={37-40},
document_type={Article},
} 

@ARTICLE{
author={Dokic Aleksandar,Jovic Srdjan},
year={2017},
title={Evaluation of agriculture and industry effect on economic health by ANFIS approach},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={479},
number={},
pages={396-399},
document_type={Article},
} 

@ARTICLE{
author={Ilic Milos N,Jovic Srdjan,Spalevic Petar C,Vujicic Igor},
year={2017},
title={Water cycle estimation by neuro-fuzzy approach},
journal={COMPUTERS AND ELECTRONICS IN AGRICULTURE},
volume={135},
number={},
pages={1-3},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan,Aksic Danilo,Skulic Aleksandar,Nedic Bogdan P},
year={2017},
title={Machining process influence on the chip form and surface roughness by neuro-fuzzy technique},
journal={APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING},
volume={123},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Anicic Obrad,Jovanovic Milivoje},
year={2017},
title={Adaptive neuro-fuzzy fusion of multi-sensor data for monitoring of CNC machining},
journal={SENSOR REVIEW},
volume={37},
number={1},
pages={78-81},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Arsic Nebojsa B,Vukojevic Vukoje,Anicic Obrad,Vujicic Sladjana},
year={2017},
title={Determination of the important machining parameters on the chip shape classification by adaptive neuro-fuzzy technique},
journal={PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY},
volume={48},
number={},
pages={18-23},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Goran,Jovic Srdjan,Jovanovic Radomir},
year={2017},
title={Economic growth rate management by soft computing approach},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={465},
number={},
pages={520-524},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Goran,Jovic Srdjan,Jovanovic Radomir,Anicic Obrad},
year={2017},
title={Management of health care expenditure by soft computing methodology},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={465},
number={},
pages={370-373},
document_type={Article},
} 

@ARTICLE{
author={Milacic Ljubisa,Jovic Srdjan,Vujovic Tanja M,Miljkovic Jovica},
year={2017},
title={Application of artificial neural network with extreme learning machine for economic growth estimation},
journal={PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS},
volume={465},
number={},
pages={285-288},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan,Skrijelj Hivzo,Nedic Bogdan P},
year={2017},
title={Prediction of laser cutting heat affected zone by extreme learning machine},
journal={OPTICS AND LASERS IN ENGINEERING},
volume={88},
number={},
pages={1-4},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Maksimovic Goran,Jovovic David},
year={2016},
title={Appraisal of natural resources rents and economic development},
journal={RESOURCES POLICY},
volume={50},
number={},
pages={289-291},
document_type={Article},
} 

@ARTICLE{
author={Petkovic Dalibor,Jovic Srdjan,Anicic Obrad,Nedic Bogdan P,Pejovic Branko},
year={2016},
title={Analyzing of flexible gripper by computational intelligence approach},
journal={MECHATRONICS},
volume={40},
number={},
pages={1-16},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Arsic Nebojsa B,Vilimonovic Jovana,Petkovic Dalibor},
year={2016},
title={Thermal sensation prediction by soft computing methodology},
journal={JOURNAL OF THERMAL BIOLOGY},
volume={62},
number={},
pages={106-108},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Anicic Obrad,Pejovic Branko},
year={2016},
title={Management of the wind speed data using adaptive neuro-fuzzy methodology},
journal={FLOW MEASUREMENT AND INSTRUMENTATION},
volume={50},
number={},
pages={201-208},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Anicic Obrad,Marsenic Mladen,Nedic Bogdan P},
year={2016},
title={Solar radiation analyzing by neuro-fuzzy approach},
journal={ENERGY AND BUILDINGS},
volume={129},
number={},
pages={261-263},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Radovic Aleksandar,Sarkocevic Zivce S,Petkovic Dalibor,Alizamir Meysam},
year={2016},
title={Estimation of the laser cutting operating cost by support vector regression methodology},
journal={APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING},
volume={122},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Danesh Amir Seyed,Younesi Emran,Anicic Obrad,Petkovic Dalibor,Shamshirband Shahaboddin},
year={2016},
title={Forecasting of Underactuated Robotic Finger Contact Forces by Support Vector Regression Methodology},
journal={INTERNATIONAL JOURNAL OF PATTERN RECOGNITION AND ARTIFICIAL INTELLIGENCE},
volume={30},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Anicic Obrad,Jovic Srdjan},
year={2016},
title={Adaptive neuro-fuzzy approach for ducted tidal turbine performance estimation},
journal={RENEWABLE & SUSTAINABLE ENERGY REVIEWS},
volume={59},
number={},
pages={1111-1116},
document_type={Review},
} 

@ARTICLE{
author={Jovic Srdjan,Raicevic Vladimir N},
year={2012},
title={The Phase Portrait of the Vibro-Impact Dynamics of Two Mass Particle Motions Along Rough Circle},
journal={MECHANIKA},
volume={},
number={6},
pages={657-665},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Raicevic Vladimir N,Garic Ljubisa B},
year={2012},
title={Vibro-Impact System Based on Forced Oscillations of Heavy Mass Particle along a Rough Parabolic Line},
journal={MATHEMATICAL PROBLEMS IN ENGINEERING},
volume={},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovic Srdjan,Raicevic Vladimir N},
year={2012},
title={Vibro-impact forced oscillations of a heavy mass particle along a rough circle excited by a single-frequency force},
journal={ACTA MECHANICA},
volume={223},
number={6},
pages={1153-1168},
document_type={Article},
} 

@ARTICLE{
author={Hedrih (Stevanovic) Katica R,Raicevic Vladimir N,Jovic Srdjan},
year={2011},
title={Phase trajectory portrait of the vibro-impact forced dynamics of two heavy mass particles motions along rough circle},
journal={COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION},
volume={16},
number={12},
pages={4745-4755},
document_type={Article},
} 

@ARTICLE{
author={Hedrih (Stevanovic) Katica R,Raicevic Vladimir N,Jovic Srdjan},
year={2010},
title={Vibro-impact of a Heavy Mass Particle Moving along a Rough Circle with Two Impact Limiters},
journal={INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION},
volume={11},
number={3},
pages={211-224},
document_type={Article},
}