@ARTICLE{
author={Ilic Nenad M,Jovanovic Milan T,Radmilovic Velimir R,Drobnjak Djordje V},
year={2022},
title={Manifestations of dynamic strain ageing in 2090 Al-Li alloy},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={96},
number={12},
pages={1386-1390},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Jovanovic Milan T,Romhanji Endre L,Zec Slavica P},
year={2021},
title={Mechanism and kinetics of aging of high-strength Cu-5 wt.% Ni-2.5 wt.% Ti},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={96},
number={1},
pages={78-82},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic-Alagic Ivana Lj,Maksimovic Vesna M,Jovanovic Milan T},
year={2020},
title={Fractographic Analysis of the Aluminum Matrix Composite Prepared by Accumulative Roll Bonding},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={26},
number={4},
pages={349-355},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Miskovic Zoran S,Maksimovic Vesna M,Cvijovic-Alagic Ivana Lj},
year={2019},
title={Optical Microscopy as a Simple Method for Analysis of Boiler Tube Failure},
journal={METALLURGICAL & MATERIALS ENGINEERING},
volume={25},
number={4},
pages={301-313},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic-Alagic Ivana Lj,Cvijovic Zorica M,Zagorac Dejan B,Jovanovic Milan T},
year={2019},
title={Cyclic oxidation of Ti3Al-based materials},
journal={CERAMICS INTERNATIONAL},
volume={45},
number={7},
pages={9423-9438},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Ilic Nenad M,Cvijovic-Alagic Ivana Lj,Maksimovic Vesna M,Zec Slavica P},
year={2017},
title={Multilayer aluminum composites prepared by rolling of pure and anodized aluminum foils},
journal={TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA},
volume={27},
number={9},
pages={1907-1919},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Stasic Jelena M,Wang Huaiwen,Jovanovic Milan T},
year={2014},
title={Processing, characterization and properties of copper-based composites strengthened by low amount of alumina particles},
journal={POWDER TECHNOLOGY},
volume={268},
number={},
pages={392-400},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Stasic Jelena M,Jovanovic Milan T,Wang Huaiwen},
year={2014},
title={Properties of Copper-Based Composite Reinforced with Al2O3 Particles of Different Size},
journal={MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3},
volume={875-877},
number={},
pages={318-323},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vencl Aleksandar A,Rajkovic Viseslava M,Zivic Fatima T,Mitrovic Slobodan R,Cvijovic-Alagic Ivana Lj,Jovanovic Milan T},
year={2013},
title={The effect of processing techniques on microstructural and tribological properties of copper-based alloys},
journal={APPLIED SURFACE SCIENCE},
volume={280},
number={},
pages={646-654},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Devecerski Aleksandar B,Jovanovic Milan T},
year={2012},
title={Characteristic of copper matrix simultaneously reinforced with nano- and micro-sized Al2O3 particles},
journal={MATERIALS CHARACTERIZATION},
volume={67},
number={},
pages={129-137},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Rajkovic Viseslava M,Jovanovic Milan T,Dimcic Biljana},
year={2011},
title={Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy},
journal={POWDER METALLURGY},
volume={54},
number={1},
pages={40-45},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Devecerski Aleksandar B,Bojanic Slobodan,Jovanovic Milan T},
year={2010},
title={Strength and thermal stability of Cu-Al2O3 composite obtained by internal oxidation},
journal={REVISTA DE METALURGIA},
volume={46},
number={6},
pages={520-529},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Babic Miroslav J,Mitrovic Slobodan R,Ilic Nenad M,Bobic Ilija Dj,Jovanovic Milan T},
year={2010},
title={Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={101},
number={12},
pages={1524-1531},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2010},
title={Properties of copper composites strengthened by nano- and micro-sized Al2O3 particles},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={101},
number={3},
pages={334-339},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2010},
title={Effects of copper and Al2O3 particles on characteristics of Cu-Al2O3 composites},
journal={MATERIALS & DESIGN},
volume={31},
number={4},
pages={1962-1970},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Popovic Milica M,Jovanovic Milan T},
year={2009},
title={The Influence of Powder Particle Size on Properties of Cu-Al2O3 Composites},
journal={SCIENCE OF SINTERING},
volume={41},
number={2},
pages={185-192},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2009},
title={Characteristics of Cu-Al2O3 composites of various starting particle size obtained by high-energy milling},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={74},
number={5},
pages={595-605},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Sekulic Danijela R,Stasic Jelena M,Rajkovic Viseslava M,Jovanovic Milan T},
year={2008},
title={The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={99},
number={11},
pages={1268-1274},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Jovanovic Milan T,Babic Miroslav J,Mitrovic Slobodan R},
year={2008},
title={Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al2O3 Particles},
journal={TRIBOLOGY LETTERS},
volume={32},
number={3},
pages={159-170},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic Ivana Lj,Jovanovic Milan T,Perusko Davor B},
year={2008},
title={Cyclic oxidation behaviour of Ti3Al-based alloy with Ni-Cr protective layer},
journal={CORROSION SCIENCE},
volume={50},
number={7},
pages={1919-1925},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2008},
title={Properties of copper matrix reinforced with nano- and micro-sized Al2O3 particles},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={459},
number={1-2},
pages={177-184},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2008},
title={Properties of copper matrix reinforced with various size and amount Of Al2O3 particles},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={200},
number={1-3},
pages={106-114},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Bobic Ilija Dj,Djuric B,Grahovac Nebojsa N,Ilic Nenad M},
year={2007},
title={Microstructural and sliding wear behaviour of a heat-treated zinc-based alloy},
journal={TRIBOLOGY LETTERS},
volume={25},
number={3},
pages={173-184},
document_type={Article},
} 

@ARTICLE{
author={Eric Olivera A,Rajnovic Dragan M,Zec Slavica P,Sidjanin Leposava P,Jovanovic Milan T},
year={2006},
title={Microstructure and fracture of alloyed austempered ductile iron},
journal={MATERIALS CHARACTERIZATION},
volume={57},
number={4-5},
pages={211-217},
document_type={Article},
} 

@ARTICLE{
author={Bozic Dusan A,Cvijovic Ivana Lj,Vilotijevic Miroljub N,Jovanovic Milan T},
year={2006},
title={The influence of microstructural characteristics on the mechanical properties of Ti6Al4V alloy produced by the powder metallurgy technique},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={71},
number={8-9},
pages={985-992},
document_type={Article},
} 

@ARTICLE{
author={Cvijovic Ivana Lj,Jovanovic Milan T,Vasiljevic-Radovic Dana G,Perusko Davor B},
year={2006},
title={The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al},
journal={JOURNAL OF MICROSCOPY-OXFORD},
volume={224},
number={},
pages={68-71},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2006},
title={Properties of dispersion hardened copper processed by internal oxidation in air},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={44},
number={3},
pages={175-179},
document_type={Article},
} 

@ARTICLE{
author={Dimcic Biljana,Cvijovic Ivana Lj,Jovanovic Milan T,Bozic Dusan A,Dimcic O},
year={2006},
title={Mechanical and fracture behavior of powder metallurgy processed Ti3Al-based alloys},
journal={JOURNAL OF MATERIALS SCIENCE},
volume={41},
number={13},
pages={4307-4313},
document_type={Article},
} 

@ARTICLE{
author={Rajkovic Viseslava M,Bozic Dusan A,Jovanovic Milan T},
year={2006},
title={Characterization of prealloyed copper powders treated in high energy ball mill},
journal={MATERIALS CHARACTERIZATION},
volume={57},
number={2},
pages={94-99},
document_type={Article},
} 

@ARTICLE{
author={Eric Olivera A,Jovanovic Milan T,Sidjanin Leposava P,Rajnovic Dragan M,Zec Slavica P},
year={2006},
title={The austempering study of alloyed ductile iron},
journal={MATERIALS & DESIGN},
volume={27},
number={7},
pages={617-622},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Tadic Srdjan,Zec Slavica P,Miskovic Zoran S,Bobic Ilija Dj},
year={2006},
title={The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy},
journal={MATERIALS & DESIGN},
volume={27},
number={3},
pages={192-199},
document_type={Article},
} 

@ARTICLE{
author={Ilic Nenad M,Jovanovic Milan T,Radmilovic Velimir R,Drobnjak Djordje V},
year={2005},
title={Manifestations of dynamic strain ageing in 2090 Al-Li alloy},
journal={ZEITSCHRIFT FUR METALLKUNDE},
volume={96},
number={12},
pages={1386-1390},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Dimcic Biljana,Bobic Ilija Dj,Zec Slavica P,Maksimovic Vesna M},
year={2005},
title={Microstructure and mechanical properties of precision cast TiAl turbocharger wheel},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={167},
number={1},
pages={14-21},
document_type={Article},
} 

@ARTICLE{
author={Eric Olivera A,Rajnovic Dragan M,Sidjanin Leposava P,Zec Slavica P,Jovanovic Milan T},
year={2005},
title={An austempering study of ductile iron alloyed with copper},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={70},
number={7},
pages={1015-1022},
document_type={Article},
} 

@ARTICLE{
author={Miskovic Zoran S,Dimcic Biljana,Bobic Ilija Dj,Zec Slavica P,Jovanovic Milan T},
year={2005},
title={Appearance of a hard layer (alpha-case) on the surface of Ti-6Al-4V surgical implant castings},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={561-566},
document_type={Article},
} 

@ARTICLE{
author={Dimcic Biljana,Vilotijevic Miroljub N,Bozic Dusan A,Rajnovic Dragan M,Jovanovic Milan T},
year={2005},
title={Microstructural and mechanical properties of Ti3Al-based intermetallics produced by powder metallurgy},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={211-216},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Jovanovic Milan T,Romhanji Endre L,Zec Slavica P},
year={2005},
title={Mechanism and kinetics of aging of high-strength Cu-5 wt.% Ni-2.5 wt.% Ti},
journal={ZEITSCHRIFT FUR METALLKUNDE},
volume={96},
number={1},
pages={78-82},
document_type={Article},
} 

@ARTICLE{
author={Eric Olivera A,Sidjanin Leposava P,Miskovic Zoran S,Zec Slavica P,Jovanovic Milan T},
year={2004},
title={Microstructure and toughness of CuNiMo austempered ductile iron},
journal={MATERIALS LETTERS},
volume={58},
number={22-23},
pages={2707-2711},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Vesna M,Tolley A,Jovanovic Milan T,Radmilovic Velimir R},
year={2004},
title={Aging of a commercial Al-Cu-Si based alloy modified with germanium},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={323-328},
document_type={Article},
} 

@ARTICLE{
author={Dimcic Biljana,Jovanovic Milan T,Bobic Ilija Dj,Zec Slavica P,Tadic Srdjan},
year={2004},
title={TiAl - a new high temperature material for turbocharger rotors},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={169-174},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Vesna M,Zec Slavica P,Radmilovic Velimir R,Jovanovic Milan T},
year={2003},
title={The effects of microalloying with silicon and germanium on microstructure and hardness of a commercial aluminum alloy},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={68},
number={11},
pages={893-901},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Jovanovic Milan T,Ilic Nenad M},
year={2003},
title={Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles},
journal={MATERIALS LETTERS},
volume={57},
number={11},
pages={1683-1688},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Bobic Ilija Dj,Jovanovic Milan T},
year={2000},
title={Microstructure and mechanical properties of ZA27 alloy matrix composites},
journal={TRENDS IN ADVANCED MATERIALS AND PROCESSES},
volume={352},
number={},
pages={219-224},
document_type={Article},
} 

@ARTICLE{
author={Tadic Srdjan,Zec Slavica P,Jovanovic Milan T},
year={2000},
title={Crystallographic orientations of Ni3Al-based aluminide},
journal={MATERIALS CHARACTERIZATION},
volume={45},
number={3},
pages={227-231},
document_type={Article},
}