@ARTICLE{
author={Janjatovic Petar D,Eric-Cekic Olivera A,Balos Sebastian S,Knezev Milos,Dramicanin Miroslav R,Grbovic-Novakovic Jasmina D,Rajnovic Dragan M},
year={2026},
title={The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons},
journal={METALS},
volume={16},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Djurdjev Mica Z,Eric-Cekic Olivera A,Janjatovic Petar D,Devecerski Aleksandar B,Rajnovic Dragan M},
year={2025},
title={Effect of Overheating Temperature on Microstructure and Hardness of HP40 Nb Alloy: Analysis by ANOVA},
journal={MATERIALS SCIENCE-MEDZIAGOTYRA},
volume={31},
number={2},
pages={141-146},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Eric-Cekic Olivera A,Janjatovic Petar D,Kremenovic Aleksandar S,Rosic Milena M,Stopic Srecko R,Rajnovic Dragan M},
year={2025},
title={Insight to the Microstructure Analysis of a HP Austenitic Heat-Resistant Steel Under Short-Term High-Temperature Exposure},
journal={METALS},
volume={15},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Pecanac Milan,Rajnovic Dragan M,Janjatovic Petar D,Dramicanin Miroslav R,Kojic Sanja P,Cap Filip,Krstanovic Lidija,Zulic Sanin},
year={2025},
title={Influence of Gel-Type Confinement for Laser Shock Peening of a Ni-Based Alloy},
journal={MATERIALS},
volume={18},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Labus-Zlatanovic Danka,Janjatovic Petar D,Pecanac Milan,Eric-Cekic Olivera A,Rosic Milena M,Stopic Srecko R},
year={2025},
title={Microstructure, Hardness, and Wear Behavior of Layers Obtained by Electric Arc Hardfacing Processes},
journal={MATERIALS},
volume={18},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Eric-Cekic Olivera A,Janjatovic Petar D,Dojcinovic Marina B,Rajnovic Dragan M},
year={2024},
title={Cavitation Damage Morphology of the Centrifugally Cast Heat-resistant Alloy-HP40 Nb},
journal={MATERIALS SCIENCE-MEDZIAGOTYRA},
volume={30},
number={4},
pages={568-575},
document_type={Article},
} 

@ARTICLE{
author={Skakun Plavka M,Rajnovic Dragan M,Janjatovic Petar D,Movrin Dejan,Dramicanin Miroslav R,Berus Lucijano,Ficko Mirko},
year={2024},
title={Experimental Determination of a Strain State in a Bulk Forming of a Low Carbon Steel},
journal={MATERIALS SCIENCE-MEDZIAGOTYRA},
volume={30},
number={1},
pages={40-46},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Labus-Zlatanovic Danka,Kulundzic Nenad R,Janjatovic Petar D,Dramicanin Miroslav R,Lanc Zorana,Hadzistevic Miodrag J,Radisic Slobodan,Rajnovic Dragan M,Pecanac Milan},
year={2023},
title={Influence of Tool-Base Metal Interference on the Performance of an Aluminium-Magnesium Alloy Joined via Bobbin Tool Friction Stir Welding},
journal={METALS},
volume={13},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Eric-Cekic Olivera A,Rajnovic Dragan M,Dojcinovic Marina B,Janjatovic Petar D},
year={2022},
title={Microstructure Evolution and Mechanical Properties Degradation of Hpnb Alloy After An Eleven-Year Service},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={3},
pages={299-304},
document_type={Article},
} 

@ARTICLE{
author={Janjatovic Petar D,Eric-Cekic Olivera A,Rajnovic Dragan M,Balos Sebastian S,Grabulov Vencislav K,Sidjanin Leposava P},
year={2022},
title={Microstructure and Fracture Mode of Unalloyed Dual-Phase Austempered Ductile Iron},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={28},
number={2},
pages={161-167},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Petronijevic-Sarcev Branislava S,Sarcev Ivan N,Mirkovic Sinisa M,Pilic Branka M,Balos Tatjana,Janjatovic Petar D},
year={2021},
title={Autopolymerized poly(methyl methacrylate) reinforced with aluminum trioxide nanoparticles},
journal={VOJNOSANITETSKI PREGLED},
volume={78},
number={12},
pages={1324-1329},
document_type={Article},
} 

@ARTICLE{
author={Janjatovic Petar D,Eric-Cekic Olivera A,Sidjanin Leposava P,Balos Sebastian S,Dramicanin Miroslav R,Grbovic-Novakovic Jasmina D,Rajnovic Dragan M},
year={2021},
title={The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons},
journal={METALS},
volume={11},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Petronijevic-Sarcev Branislava S,Sarcev Ivan N,Janjatovic Petar D,Pilic Branka M,Balos Tatjana},
year={2020},
title={Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles},
journal={MATERIALE PLASTICE},
volume={57},
number={4},
pages={13-20},
document_type={Article},
} 

@ARTICLE{
author={Eric-Cekic Olivera A,Rajnovic Dragan M,Sidjanin Leposava P,Janjatovic Petar D,Balos Sebastian S},
year={2020},
title={Dual Phase Austempered Ductile Iron - The Material Revolution and Its Engineering Applications},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={22-38},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Balos Sebastian S,Dramicanin Miroslav R,Janjatovic Petar D,Kulundzic Nenad R,Zabunov Ivan,Pilic Branka M,Klobcar Damjan},
year={2020},
title={Influence of Metallic Oxide Nanoparticles on the Mechanical Properties of an A-TIG Welded 304L Austenitic Stainless Steel},
journal={MATERIALS},
volume={13},
number={20},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Berus Lucijano,Skakun Plavka M,Rajnovic Dragan M,Janjatovic Petar D,Sidjanin Leposava P,Ficko Mirko},
year={2020},
title={Determination of the Grain Size in Single-Phase Materials by Edge Detection and Concatenation},
journal={METALS},
volume={10},
number={10},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Skakun Plavka M,Rajnovic Dragan M,Janjatovic Petar D,Balos Sebastian S,Shishkin Andrei,Novak Pavel,Sidjanin Leposava P},
year={2020},
title={Metallographic Determination of Strain Distribution in Cold Extruded Aluminum Gear-Like Element},
journal={METALS},
volume={10},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dramicanin Miroslav R,Balos Sebastian S,Janjatovic Petar D,Zabunov Ivan,Grabulov Vencislav K},
year={2019},
title={Activated Flux Tig Welding of Stainless-Steel Pipes},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={25},
number={4},
pages={353-360},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Dramicanin Miroslav R,Janjatovic Petar D,Zabunov Ivan,Pilic Branka M,Goel Saurav,Szutkowska Magdalena},
year={2019},
title={Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding},
journal={METALS},
volume={9},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Janjatovic Petar D,Dramicanin Miroslav R,Labus-Zlatanovic Danka,Pilic Branka M,Hanus Pavel,Jaworska Lucyna},
year={2019},
title={Microstructure, Microhardness, and Wear Properties of Cobalt Alloy Electrodes Coated with TiO2 Nanoparticles},
journal={METALS},
volume={9},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Radisavljevic Igor Z,Rajnovic Dragan M,Janjatovic Petar D,Dramicanin Miroslav R,Eric-Cekic Olivera A,Sidjanin Leposava P},
year={2019},
title={Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates},
journal={DEFENCE SCIENCE JOURNAL},
volume={69},
number={6},
pages={571-576},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Rajnovic Dragan M,Sidjanin Leposava P,Savkovic Borislav S,Kovac Pavel P,Janjatovic Petar D},
year={2019},
title={Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys},
journal={MATERIA-RIO DE JANEIRO},
volume={24},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Dramicanin Miroslav R,Janjatovic Petar D,Zabunov Ivan,Klobcar Damjan,Busic Matija,Grilli Maria Luisa},
year={2019},
title={Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective},
journal={METALS},
volume={9},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Rajnovic Dragan M,Sidjanin Leposava P,Janjatovic Petar D,Dramicanin Miroslav R,Howard Daniel},
year={2018},
title={Cast alloys for reciprocating engine heads-performance evaluation},
journal={2018 INTERNATIONAL CONFERENCE ON MACHINE LEARNING AND DATA ENGINEERING (ICMLDE 2018)},
volume={},
number={},
pages={117-120},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Balos Sebastian S,Labus-Zlatanovic Danka,Janjatovic Petar D,Dramicanin Miroslav R,Rajnovic Dragan M,Sidjanin Leposava P},
year={2018},
title={Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys},
journal={E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS},
volume={329},
number={},
pages={-},
document_type={Proceedings Paper},
}