@ARTICLE{
author={Veg Marko A,Salinic Slavisa M,Obradovic Aleksandar M,Tomovic Aleksandar M,Selyutskiy Yury D,Grbovic Aleksandar M},
year={2026},
title={On the Axial-Bending-Torsional Vibration Coupling Effect Occurring in a Cantilever Beam with an Asymmetrically Attached Spatial Rigid Body},
journal={JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES},
volume={14},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrasinovic Milos D,Raicevic Nikola G,Petrovic Mihailo G,Grbovic Aleksandar M,Petrasinovic Danilo M},
year={2025},
title={Estimation of Hover Endurance for an Electric Multicopter with Experimental Validation of Results},
journal={SUSTAINABLE AVIATION INNOVATIONS, ADVANCEMENTS, AND DESTINATIONS},
volume={},
number={},
pages={174-178},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Mihailo G,Raicevic Nikola G,Petrasinovic Milos D,Grbovic Aleksandar M,Petrasinovic Danilo M},
year={2025},
title={Experimental Analysis of the Deformation and Failure of a Composite Drone Arm},
journal={SUSTAINABLE AVIATION INNOVATIONS, ADVANCEMENTS, AND DESTINATIONS},
volume={},
number={},
pages={162-166},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Mihailo G,Grbovic Aleksandar M,Raicevic Nikola G,Petrasinovic Milos D,Petrovic Veljko M},
year={2025},
title={Optimal Methodology for Designing and Testing Multicopter Arm Made of Composite Materials},
journal={FME TRANSACTIONS},
volume={53},
number={4},
pages={651-660},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Sedmak Simon A},
year={2025},
title={Structural integrity and life assessment of railway and aeronautical components - Review of four case studies},
journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
volume={139},
number={},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Colic Katarina G,Kostic Svetlana M,Sedmak Simon A,Gubeljak Nenad,Grbovic Aleksandar M},
year={2025},
title={Structural Integrity and Life Assessment of Ti-6Al-4V Orthopaedic Implants},
journal={METALS},
volume={15},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Nikola A,Sedmak Simon A,Grbovic Aleksandar M,Djordjevic Branislav R,Kirin Snezana D},
year={2025},
title={The role of numerical simulation of fatigue crack growth in failure analysis of a turbine shaft},
journal={ENGINEERING FAILURE ANALYSIS},
volume={167},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S,Popovic Vladimir M,Sedmak Simon A,Bozic Zeljko},
year={2025},
title={Fatigue remaining life prediction of high pressure turbine casing with unacceptable defects},
journal={ENGINEERING FAILURE ANALYSIS},
volume={167},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Gubeljak Nenad,Sedmak Simon A,Budimir Nikola J},
year={2024},
title={Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM-A Review of Case Studies},
journal={MATERIALS},
volume={17},
number={22},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S,Bozic Zeljko},
year={2024},
title={Three-Parameter Optimisation of An Attachment Lug},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={24},
number={1},
pages={124-127},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Sedmak Aleksandar S,Lazic-Vulicevic Ljubica,Zaidi Radzeya,Vitas Nikola D,Kirin Snezana D},
year={2023},
title={Extended Finite Element Method Simulation of Fatigue Crack Growth in a Charpy Specimen},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={235-238},
document_type={Editorial Material},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Zaidi Radzeya,Kirin Snezana D,Vitas Nikola D,Golubovic Tamara A,Vucetic Ivana T},
year={2023},
title={Numerical, Analytical and Experimental Determination of Remaining Life of a Pipe with An Axial Crack},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={239-244},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S},
year={2023},
title={Numerical and Experimental Analysis of the Integrity of Light Aircraft Wing Structure},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={167-172},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Solob Abdussalam Yousef,Sedmak Simon A,Sedmak Aleksandar S},
year={2023},
title={Optimisation of Wing-Fuselage Attachment Lug},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dinulovic Mirko R,Grbovic Aleksandar M,Adzic Vuk M,Alarafati Hamad},
year={2023},
title={Composite Plates with Nomex Honeycomb Core Modelling for Dynamic Integrity at the Mesoscale Level},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={2},
pages={147-153},
document_type={Article},
} 

@ARTICLE{
author={Raicevic Nikola G,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S},
year={2023},
title={Fatigue life prediction of topologically optimized torque link adjusted for additive manufacturing},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={176},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Zoran,Burzic Zijah H,Sedmak Aleksandar S,Grbovic Aleksandar M,Kostic Nikola},
year={2023},
title={Corrosion Effect on the Remaining Life of Aa2024-T351 Components Uticaj Korozije Na Preostali Vek Komponenata Od Aa2024-T351},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={1},
pages={98-101},
document_type={Editorial Material},
} 

@ARTICLE{
author={Salinic Slavisa M,Obradovic Aleksandar M,Tomovic Aleksandar M,Trifkovic Dragan R,Grbovic Aleksandar M},
year={2023},
title={Coupled axial-bending vibration of axially functionally graded Timoshenko cantilever beams of non-uniform cross-section with an attached rigid body},
journal={MECCANICA},
volume={58},
number={7},
pages={1233-1248},
document_type={Article},
} 

@ARTICLE{
author={Raicevic Nikola G,Petrasinovic Danilo M,Grbovic Aleksandar M,Petrasinovic Milos D,Balac Martina M,Petrovic Mihailo G},
year={2023},
title={The Wind Speed Impact on Stress and Deformation of Composite Wind Turbine Blade},
journal={EXPERIMENTAL RESEARCH AND NUMERICAL SIMULATION IN APPLIED SCIENCES, CNNTECH 2022},
volume={564},
number={},
pages={114-130},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitic Sasa R,Popovic Vladimir M,Blagojevic Ivan A,Grbovic Aleksandar M},
year={2023},
title={Verification of the Numerical Model of Optimized Bus Body Structure According to UN Regulation No. 66},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={30},
number={1},
pages={87-92},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Petrovski Blagoj,Sghayer Abulgasem,Sedmak Simon A,Berto Filippo,Djurdjevic Andrijana A},
year={2022},
title={The effects of welded clips on fatigue crack growth in AA6156 T6 panels},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={165},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrasinovic Milos D,Grbovic Aleksandar M,Petrasinovic Danilo M,Petrovic Mihailo G,Raicevic Nikola G},
year={2022},
title={Real Coded Mixed Integer Genetic Algorithm for Geometry Optimization of Flight Simulator Mechanism Based on Rotary Stewart Platform},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={14},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Sedmak Simon A,Kirin Snezana D,Berto Filippo},
year={2022},
title={Fatigue life assessment of orthopedic plates made of Ti6Al4V},
journal={ENGINEERING FAILURE ANALYSIS},
volume={137},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Bozic Zeljko,Bozic Ivan O,Obradovic Aleksandar M,Sedmak Aleksandar S,Sedmak Simon A},
year={2022},
title={Experimental and numerical evaluation of fracture characteristics of composite material used in the aircraft engine cover manufacturing},
journal={ENGINEERING FAILURE ANALYSIS},
volume={137},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Bozic Zeljko,Sedmak Simon A,Lozanovic-Sajic Jasmina V},
year={2022},
title={Fatigue crack growth in locking compression plates},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={157},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Petrovic Zoran,Grbovic Aleksandar M,Burzic Zijah H,Perkovic Srdja},
year={2022},
title={Influence of Corrosion on Parameters of Fracture Mechanics of Aluminium Alloys 2024-T351 and 7075-T651},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={29},
number={1},
pages={239-245},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Arsic Dusan M,Flajs Zeljko R,Grbovic Aleksandar M,Todic Aleksandar},
year={2021},
title={Application of Non-Destructive Testing for Condition Analysis, Repair of Damages and Integrity Assessment of Vital Steel Structures},
journal={RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING},
volume={57},
number={10},
pages={918-931},
document_type={Article},
} 

@ARTICLE{
author={Rakovic Dragan,Simonovic Aleksandar M,Grbovic Aleksandar M,Radovic Ljubica M,Vorkapic Milos D,Krstic Branimir B},
year={2021},
title={Fatigue fracture analysis of helicopter landing gear cross tube},
journal={ENGINEERING FAILURE ANALYSIS},
volume={129},
number={},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Elmiladi Abdulrazag Abdallah,Petrovic Veljko M,Grbovic Aleksandar M,Sedmak Aleksandar S,Balac Igor M},
year={2021},
title={Numerical Evaluation of Thermal Stresses Generated in Laminated Composite Structure Exposed to Low Temperatures},
journal={THERMAL SCIENCE},
volume={25},
number={5},
pages={3847-3856},
document_type={Article},
} 

@ARTICLE{
author={Stamenkovic Dragoslav S,Obradovic-Djuricic Kosovka,Stamenkovic Dejan D,Grbovic Aleksandar M,Djordjevic Igor},
year={2021},
title={The Fourth Industrial Revolution's impact on dentistry},
journal={SRPSKI ARHIV ZA CELOKUPNO LEKARSTVO},
volume={149},
number={7-8},
pages={503-510},
document_type={Review},
} 

@ARTICLE{
author={Elayeb Abdelnaser Abdusalam,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Valenta Tomas,Ivanovic Ivana B,Sedmak Aleksandar S},
year={2021},
title={Fatigue crack growth in a structure exposed to high temperature},
journal={ENGINEERING FAILURE ANALYSIS},
volume={127},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kastratovic Gordana M,Grbovic Aleksandar M,Sedmak Aleksandar S,Bozic Z,Sedmak Simon A},
year={2021},
title={Composite material selection for aircraft structures based on experimental and numerical evaluation of mechanical properties},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020)},
volume={31},
number={},
pages={127-133},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Golubovic Zorana Z,Milosevic Milos S},
year={2021},
title={Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material},
journal={4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020)},
volume={31},
number={},
pages={122-126},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Hemer Abubkr M,Sedmak Simon A,Milovic Ljubica P,Grbovic Aleksandar M,Cabrilo Aleksandar,Kljajin Milan},
year={2021},
title={Welded joint geometry effect on fatigue crack growth resistance in different metallic materials},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={150},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Saleem Alteer,Petrovic Veljko M,Grbovic Aleksandar M,Lozanovic-Sajic Jasmina V,Balac Igor M},
year={2021},
title={Numerical Evaluation of the Elastic Properties of Carbon Fiber Reinforced Composite Material at Elevated and Lowered Temperatures},
journal={SCIENCE OF SINTERING},
volume={53},
number={1},
pages={127-136},
document_type={Article},
} 

@ARTICLE{
author={Salinic Slavisa M,Obradovic Aleksandar M,Grbovic Aleksandar M},
year={2021},
title={Comments on "An exact dynamic stiffness method for multibody systems consisting of beams and rigid-bodies, Mechanical Systems and Signal Processing 150 (2021) 107264, by X. Liu, Ch. Sun, JR Banerjee, H-Ch. Dan, L. Chang"},
journal={MECHANICAL SYSTEMS AND SIGNAL PROCESSING},
volume={159},
number={},
pages={-},
document_type={Editorial Material},
} 

@ARTICLE{
author={Sekutkovski Bojan D,Grbovic Aleksandar M,Todic Ivana S,Pejcev Aleksandar V},
year={2021},
title={A partitioned solution approach for the fluid-structure interaction of thin-walled structures and high-Reynolds number flows using RANS and hybrid RANS-LES turbulence models},
journal={AEROSPACE SCIENCE AND TECHNOLOGY},
volume={113},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ignjatovic Nenad L,Mitkovic Milorad B,Obradovic Bojana,Stamenkovic Dragoslav S,Dankuc Dragan V,Manic Miodrag T,Grbovic Aleksandar M,Kovacevic Branko D,Djukanovic Ljubica D},
year={2021},
title={Interdisciplinary crossover for rapid advancements - collaboration between medical and engineering scientists with the focus on Serbia},
journal={SRPSKI ARHIV ZA CELOKUPNO LEKARSTVO},
volume={149},
number={3-4},
pages={229-235},
document_type={Review},
} 

@ARTICLE{
author={Obradovic Aleksandar M,Salinic Slavisa M,Grbovic Aleksandar M},
year={2021},
title={Mass minimization of an Euler-Bernoulli beam with coupled bending and axial vibrations at prescribed fundamental frequency},
journal={ENGINEERING STRUCTURES},
volume={228},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Golubovic Zorana Z,Mladenovic Goran MO,Colic Katarina G,Milosevic Milos S},
year={2020},
title={Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1963-1968},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Hemer Abubkr M,Sedmak Simon A,Milovic Ljubica P,Grbovic Aleksandar M,Sedmak Aleksandar S},
year={2020},
title={FEM simulation of welded joint geometry influence on fatigue crack growth resistance},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1827-1832},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Grbovic Aleksandar M,Kirin Snezana D,Sarkocevic Zivce S,Zaidi Radzeya},
year={2020},
title={Material Effects on Risk Assessment of Residual Life of Oil Drilling Rig Pipe},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={1315-1320},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Radakovic Zoran J,Sedmak Simon A},
year={2020},
title={Extended FEM analysis of fatigue crack growth in Ti-6Al-4V orthopaedic plates},
journal={1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1},
volume={28},
number={},
pages={555-560},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrasinovic Milos D,Grbovic Aleksandar M,Petrasinovic Danilo M},
year={2020},
title={Geometry Optimization of Flight Simulator Mechanism Using Genetic Algorithm},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={340-358},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kastratovic Gordana M,Vidanovic Nenad D,Grbovic Aleksandar M,Mirkov Nikola S,Rasuo Bosko P},
year={2020},
title={Numerical Simulation of Crack Propagation in Seven-Wire Strand},
journal={COMPUTATIONAL AND EXPERIMENTAL APPROACHES IN MATERIALS SCIENCE AND ENGINEERING, CNNTECH 2019},
volume={90},
number={},
pages={76-91},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vucetic Filip,Colic Katarina G,Grbovic Aleksandar M,Petrovic Ana S,Sedmak Aleksandar S,Kozak Drazan V,Sedmak Simon A},
year={2020},
title={Numerical Simulation of Fatigue Crack Growth in Titanium Alloy Orthopaedic Plates},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={6},
pages={1917-1922},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Bozic Zeljko,Kirin Snezana D,Kastratovic Gordana M,Sedmak Aleksandar S,Vidanovic Nenad D},
year={2020},
title={Fatigue life assessment of the structure with widespread damage exposed to high temperature},
journal={1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1)},
volume={26},
number={},
pages={402-408},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milovanovic Aleksa Lj,Sedmak Aleksandar S,Grbovic Aleksandar M,Mijatovic Tamara,Colic Katarina G},
year={2020},
title={Design Aspects of Hip Implant Made of Ti-6Al-4V Extra Low Interstitials Alloy},
journal={1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1)},
volume={26},
number={},
pages={299-305},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Cerovic Vera B,Milkovic Dragan D,Grbovic Aleksandar M,Petrovic Dragan VL,Simonovic Vojislav},
year={2020},
title={2D Analytical Model for Evaluation of the Forces in the Three-point Hitch Mechanism},
journal={JOURNAL OF AGRICULTURAL SCIENCES-TARIM BILIMLERI DERGISI},
volume={26},
number={3},
pages={271-281},
document_type={Article},
} 

@ARTICLE{
author={Djukic Daniela,Grbovic Aleksandar M,Kastratovic Gordana M,Vidanovic Nenad D,Sedmak Aleksandar S},
year={2020},
title={Stress intensity factors numerical calculations for two penny shaped cracks in the elastic solid},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Zaidi Radzeya,Sedmak Aleksandar S,Kirin Snezana D,Grbovic Aleksandar M,Li Wei,Lazic-Vulicevic Ljubica,Sarkocevic Zivce S},
year={2020},
title={Risk assessment of oil drilling rig welded pipe based on structural integrity and life estimation},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Solob A,Grbovic Aleksandar M,Bozic Zeljko,Sedmak Aleksandar S},
year={2020},
title={XFEM based analysis of fatigue crack growth in damaged wing-uselage attachment lug},
journal={ENGINEERING FAILURE ANALYSIS},
volume={112},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kirin Snezana D,Sedmak Aleksandar S,Zaidi Radzeya,Grbovic Aleksandar M,Sarkocevic Zivce S},
year={2020},
title={Comparison of experimental, numerical and analytical risk assessment of oil drilling rig welded pipe based on fracture mechanics parameters},
journal={ENGINEERING FAILURE ANALYSIS},
volume={114},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vidanovic Nenad D,Rasuo Bosko P,Kastratovic Gordana M,Grbovic Aleksandar M,Puharic Mirjana A,Maksimovic Katarina S},
year={2020},
title={Multidisciplinary Shape Optimization of Missile Fin Configuration Subject to Aerodynamic Heating},
journal={JOURNAL OF SPACECRAFT AND ROCKETS},
volume={57},
number={3},
pages={510-527},
document_type={Article},
} 

@ARTICLE{
author={Sandic Uros,Tomic Radoljub P,Grbovic Aleksandar M,Sedmak Aleksandar S},
year={2020},
title={Failure Analysis of Bicycle Frame Composite Structure Based on Stacking Variant of Laminate Layers},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={1},
pages={69-76},
document_type={Article},
} 

@ARTICLE{
author={Tomovic Aleksandar M,Salinic Slavisa M,Obradovic Aleksandar M,Grbovic Aleksandar M,Milovancevic Milorad Dj},
year={2020},
title={Closed-form solution for the free axial-bending vibration problem of structures composed of rigid bodies and elastic beam segments},
journal={APPLIED MATHEMATICAL MODELLING},
volume={77},
number={},
pages={1148-1167},
document_type={Article},
} 

@ARTICLE{
author={Hemer Abubkr M,Milovic Ljubica P,Grbovic Aleksandar M,Aleksic Bojana V,Aleksic Vujadin D},
year={2020},
title={Numerical determination and experimental validation of the fracture toughness of welded joints},
journal={ENGINEERING FAILURE ANALYSIS},
volume={107},
number={},
pages={-},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Higaeg Mohamed,Balac Igor M,Grbovic Aleksandar M,Milovancevic Milorad Dj,Jelic Milos},
year={2019},
title={Numerical Modeling of the Porosity Influence on Strength of Structural Materials},
journal={SCIENCE OF SINTERING},
volume={51},
number={4},
pages={459-467},
document_type={Article},
} 

@ARTICLE{
author={Abdulrazag Elmiladi,Balac Igor M,Colic Katarina G,Grbovic Aleksandar M,Milovancevic Milorad Dj,Jelic Milos},
year={2019},
title={Numerical Modeling of the Porosity Influence on the Elastic Properties of Sintered Materials},
journal={SCIENCE OF SINTERING},
volume={51},
number={2},
pages={153-161},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Bojana V,Grbovic Aleksandar M,Milovic Ljubica P,Hemer Abubkr M,Aleksic Vujadin D},
year={2019},
title={Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline},
journal={ENGINEERING FAILURE ANALYSIS},
volume={106},
number={},
pages={-},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Balac Martina M,Grbovic Aleksandar M},
year={2019},
title={Multiparameter Structural Optimization of Pressure Vessel with Two Nozzles},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={148-158},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Cerovic Vera B,Milkovic Dragan D,Grbovic Aleksandar M,Radulovic Sasa,Tanaskovic Jovan D},
year={2019},
title={Measurement of the Stress State in the Lower Link of the Three-Point Hitch Mechanism},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={112-121},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Colic Katarina G,Grbovic Aleksandar M,Sedmak Aleksandar S,Legweel Khaled MB},
year={2019},
title={Application of Numerical Methods in Design and Analysis of Orthopedic Implant Integrity},
journal={EXPERIMENTAL AND NUMERICAL INVESTIGATIONS IN MATERIALS SCIENCE AND ENGINEERING},
volume={54},
number={},
pages={96-111},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Eldwaib Khalid Ahmed,Kirin Snezana D},
year={2019},
title={Determination of optimum wing spar cross section for maximum fatigue life},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={127},
number={},
pages={305-311},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Colic Katarina G,Grbovic Aleksandar M,Balac Igor M,Burzic Meri},
year={2019},
title={Numerical analysis of fatigue crack growth of hip implant},
journal={ENGINEERING FRACTURE MECHANICS},
volume={216},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Dzindo Emina S,Sedmak Simon A,Grbovic Aleksandar M,Milovanovic Nikola A,Djordjevic Branislav R},
year={2019},
title={XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring},
journal={ARCHIVE OF APPLIED MECHANICS},
volume={89},
number={5},
pages={919-926},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Sedmak Aleksandar S,Kastratovic Gordana M,Petrasinovic Danilo M,Vidanovic Nenad D,Sghayer Abulgasem},
year={2019},
title={Effect of laser beam welded reinforcement on integral skin panel fatigue life},
journal={ENGINEERING FAILURE ANALYSIS},
volume={101},
number={},
pages={383-393},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Balac Igor M,Popovic Mihajlo D},
year={2019},
title={Fatigue crack paths in light aircraft wing spars},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={123},
number={},
pages={96-104},
document_type={Article},
} 

@ARTICLE{
author={Stankovic Milos B,Marinkovic Aleksandar B,Grbovic Aleksandar M,Miskovic Zarko Z,Rosic Bozidar B,Mitrovic Radivoje M},
year={2019},
title={Determination of Archard's wear coefficient and wear simulation of sliding bearings},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={71},
number={1},
pages={119-125},
document_type={Article},
} 

@ARTICLE{
author={Aleksic Bojana V,Milovic Ljubica P,Grbovic Aleksandar M,Hemer Abubkr M,Aleksic Vujadin D,Zrilic Milorad M},
year={2018},
title={Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={1589-1594},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kastratovic Gordana M,Aldarwish Mustafa,Grbovic Aleksandar M,Vidanovic Nenad D,Eldwaib Khalid Ahmed},
year={2018},
title={Stress intensity factor for multiple cracks on curved panels},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={469-474},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Eldwaib Khalid Ahmed,Grbovic Aleksandar M,Kastratovic Gordana M,Aldarwish Mustafa},
year={2018},
title={Design of Wing Spar Cross Section for Optimum Fatigue Life},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={444-449},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Eldwaib Khalid Ahmed,Grbovic Aleksandar M,Sedmak Aleksandar S,Kastratovic Gordana M,Petrasinovic Danilo M,Sedmak Simon A},
year={2018},
title={Fatigue Life Estimation of Damaged Integral Wing Spar Using XFEM},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={6},
pages={1837-1842},
document_type={Article},
} 

@ARTICLE{
author={Aldarwish Mustafa,Grbovic Aleksandar M,Kastratovic Gordana M,Sedmak Aleksandar S,Lazic Mirjana M},
year={2018},
title={Stress Intensity Factors Evaluation at Tips of Multi-Site Cracks in Unstiffened 2024-T3 Aluminium Panel Using XFEM},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={6},
pages={1616-1622},
document_type={Article},
} 

@ARTICLE{
author={Sghayer Abulgasem,Grbovic Aleksandar M,Sedmak Aleksandar S,Dinulovic Mirko R,Grozdanovic Ines B,Sedmak Simon A,Petrovski Blagoj},
year={2018},
title={Experimental and Numerical Analysis of Fatigue Crack Growth in Integral Skin-Stringer Panels},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={3},
pages={785-791},
document_type={Article},
} 

@ARTICLE{
author={Balac Martina M,Grbovic Aleksandar M,Petrovic Aleksandar Lj,Popovic Vladimir M},
year={2018},
title={Fem Analysis of Pressure Vessel with An Investigation of Crack Growth on Cylindrical Surface},
journal={EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY},
volume={20},
number={3},
pages={378-386},
document_type={Article},
} 

@ARTICLE{
author={Kredegh Abubakr,Sedmak Aleksandar S,Grbovic Aleksandar M,Sedmak Simon A},
year={2017},
title={Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint},
journal={INTERNATIONAL JOURNAL OF FATIGUE},
volume={105},
number={},
pages={276-282},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Kredegh Abubakr,Sedmak Aleksandar S,Grbovic Aleksandar M,Milosevic Nenad Z,Danicic Darko},
year={2016},
title={Numerical simulation of fatigue crack growth in friction stir welded T joint made of Al 2024 T351 alloy},
journal={21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21)},
volume={2},
number={},
pages={3065-3072},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Grbovic Aleksandar M,Tatic Uros,Sedmak Simon A,Djordjevic Branislav R},
year={2016},
title={Finite element modeling of hip implant static loading},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={257-262},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Colic Katarina G,Sedmak Aleksandar S,Grbovic Aleksandar M,Burzic Meri,Hloch Sergej,Sedmak Simon A},
year={2016},
title={Numerical Simulation of Fatigue Crack Growth in Hip Implants},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={229-235},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Glisic Mirko V,Stamenkovic Dragoslav S,Grbovic Aleksandar M,Todorovic Aleksandar J,Markovic Aleksa,Trifkovic Branka V},
year={2016},
title={Analysis of load distribution in tooth-implant supported fixed partial dentures by the use of resilient abutment},
journal={SRPSKI ARHIV ZA CELOKUPNO LEKARSTVO},
volume={144},
number={3-4},
pages={188-195},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Andrijana A,Zivojinovic Danijela,Grbovic Aleksandar M,Sedmak Aleksandar S,Rakin Marko P,Dascau Horia,Kirin Snezana D},
year={2015},
title={Numerical simulation of fatigue crack propagation in friction stir welded joint made of Al 2024-T351 alloy},
journal={ENGINEERING FAILURE ANALYSIS},
volume={58},
number={},
pages={477-484},
document_type={Article},
} 

@ARTICLE{
author={Kastratovic Gordana M,Grbovic Aleksandar M,Vidanovic Nenad D},
year={2015},
title={Approximate method for stress intensity factors determination in case of multiple site damage},
journal={APPLIED MATHEMATICAL MODELLING},
volume={39},
number={19},
pages={6050-6059},
document_type={Article},
} 

@ARTICLE{
author={Zivojinovic Danijela,Djurdjevic Andrijana A,Grbovic Aleksandar M,Sedmak Aleksandar S,Rakin Marko P},
year={2014},
title={Numerical modelling of crack propagation in friction stir welded joint made of aluminium alloy},
journal={20TH EUROPEAN CONFERENCE ON FRACTURE},
volume={3},
number={},
pages={1330-1335},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rasuo Bosko P,Dinulovic Mirko R,Veg Aleksandar,Grbovic Aleksandar M,Bengin Aleksandar C},
year={2014},
title={Harmonization of new wind turbine rotor blades development process: A review},
journal={RENEWABLE & SUSTAINABLE ENERGY REVIEWS},
volume={39},
number={},
pages={874-882},
document_type={Review},
} 

@ARTICLE{
author={Patrnogic Vesna,Todorovic Aleksandar J,Scepanovic Miodrag,Radovic Katarina,Vesnic Jelena,Grbovic Aleksandar M},
year={2013},
title={Free-end saddle length influence on stress level in unilateral complex partial denture abutment teeth and retention elements},
journal={VOJNOSANITETSKI PREGLED},
volume={70},
number={11},
pages={1015-1022},
document_type={Article},
} 

@ARTICLE{
author={Grbovic Aleksandar M,Rasuo Bosko P},
year={2012},
title={FEM based fatigue crack growth predictions for spar of light aircraft under variable amplitude loading},
journal={ENGINEERING FAILURE ANALYSIS},
volume={26},
number={},
pages={50-64},
document_type={Article},
} 

@ARTICLE{
author={Popovic Vladimir M,Vasic Branko M,Lazovic Tatjana M,Grbovic Aleksandar M},
year={2012},
title={Application of New Decision Making Model Based on Modified Cost-Benefit Analysis - a Case Study: Belgrade Tramway Transit},
journal={ASIA-PACIFIC JOURNAL OF OPERATIONAL RESEARCH},
volume={29},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Benisa Muamar,Babic Bojan R,Grbovic Aleksandar M,Stefanovic Zoran},
year={2012},
title={Computer-Aided Modeling of the Rubber-Pad Forming Process},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={5},
pages={503-510},
document_type={Article},
} 

@ARTICLE{
author={Radovic Katarina,Cairovic Aleksandra D,Todorovic Aleksandar J,Stancic Ivica,Grbovic Aleksandar M},
year={2010},
title={Comparative Analysis of Unilateral Removable Partial Denture and Classical Removable Partial Denture by Using Finite Element Method},
journal={SRPSKI ARHIV ZA CELOKUPNO LEKARSTVO},
volume={138},
number={11-12},
pages={706-713},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Aleksandar J,Radovic Katarina,Grbovic Aleksandar M,Rudolf Rebeka,Maksimovic Ivana,Stamenkovic Dragoslav S},
year={2010},
title={Stress Analysis Of A Unilateral Complex Partial Denture Using The Finite-element Method},
journal={MATERIALI IN TEHNOLOGIJE},
volume={44},
number={1},
pages={41-47},
document_type={Article},
}