@ARTICLE{
author={Popovic Milan M,Popovic Milivoje M,Elek Predrag M},
year={2025},
title={A Novel Grain Configuration for Dual Thrust Solid Rocket Motor Using Two Propellants},
journal={THERMAL SCIENCE},
volume={29},
number={6B},
pages={4693-4701},
document_type={Article},
} 

@ARTICLE{
author={Bisic Muhamed,Pandzic Adi,Jusufbegovic Merim,Cerimovic Mujo,Elek Predrag M},
year={2025},
title={Influence of Infill Pattern on Ballistic Resistance Capabilities of 3D-Printed Polymeric Structures},
journal={POLYMERS},
volume={17},
number={13},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurovic Radovan V,Elek Predrag M,Markovic Milos D,Jevtic Dejan T},
year={2025},
title={Modification and experimental validation of the Forrestal-Warren perforation model for high hardness armor steel plates of intermediate thickness},
journal={DEFENCE TECHNOLOGY},
volume={46},
number={},
pages={267-284},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Biljana,Novakovic Nikola B,Milosevic-Govedarovic Sanja S,Kurko Sandra V,Stamenic Ljubisav S,Grbovic-Novakovic Jasmina D,Elek Predrag M},
year={2025},
title={The Influence of Al<sub>12</sub>Mg<sub>17</sub> Compound Concentration in High-Energy Mixtures on Thermobaric Systems Characteristics},
journal={PROPELLANTS EXPLOSIVES PYROTECHNICS},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Alameri Omar,Elek Predrag M},
year={2024},
title={Efficiency Analysis of Fragmentation Warheads Through Advanced Modeling Techniques: Experimental and Numerical Study},
journal={SHOCK AND VIBRATION},
volume={2024},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Milos D,Elek Predrag M,Jaramaz Dragana D,Jevtic Dejan T,Djurovic Radovan V,Jaramaz Lana S,Mickovic Dusan D},
year={2023},
title={Analysis of Parameters Influencing the Pressure and Temperature Distribution in the Gun Bore Evacuator},
journal={THERMAL SCIENCE},
volume={27},
number={1B},
pages={727-738},
document_type={Article},
} 

@ARTICLE{
author={Alazeezi Mohammed,Popovic Nikola P,Elek Predrag M},
year={2022},
title={Two-Component Propellant Grain for Rocket Motor Combustion Analysis and Geometric Optimization},
journal={THERMAL SCIENCE},
volume={26},
number={2},
pages={1567-1578},
document_type={Article},
} 

@ARTICLE{
author={Jevtic Dejan T,Mickovic Dejan M,Jaramaz Slobodan S,Elek Predrag M,Markovic Milos D,Zivkovic Sasa Z},
year={2020},
title={Modeling of Gas Parameters in the Cylinder of the Automatic Gun During Firing},
journal={THERMAL SCIENCE},
volume={24},
number={6},
pages={4135-4145},
document_type={Article},
} 

@ARTICLE{
author={Alazeezi Mohammed,Elek Predrag M},
year={2020},
title={Nozzle Optimization of Dual Thrust Rocket Motors},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II},
volume={76},
number={},
pages={468-477},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Elek Predrag M,Jaramaz Slobodan S,Mickovic Dejan M,Miloradovic Nenad M},
year={2016},
title={Experimental and numerical investigation of perforation of thin steel plates by deformable steel penetrators},
journal={THIN-WALLED STRUCTURES},
volume={102},
number={},
pages={58-67},
document_type={Article},
} 

@ARTICLE{
author={Mickovic Dejan M,Jaramaz Slobodan S,Elek Predrag M,Miloradovic Nenad M,Jaramaz Dragana D},
year={2016},
title={A Model for Explosive Reactive Armor Interaction with Shaped Charge Jet},
journal={PROPELLANTS EXPLOSIVES PYROTECHNICS},
volume={41},
number={1},
pages={53-61},
document_type={Article},
} 

@ARTICLE{
author={Bjelovuk Ivana D,Jaramaz Slobodan S,Elek Predrag M,Mickovic Dejan M,Kricak Lazar M},
year={2015},
title={Modelling of Characteristics of a Crater Emerged from a Surface Explosion on the Soil},
journal={COMBUSTION EXPLOSION AND SHOCK WAVES},
volume={51},
number={3},
pages={395-400},
document_type={Article},
} 

@ARTICLE{
author={Bjelovuk Ivana D,Jaramaz Slobodan S,Elek Predrag M,Mickovic Dejan M,Kricak Lazar M},
year={2015},
title={Estimation of the Explosive Mass Based on the Surface Explosion Crater on Asphalt},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={1},
pages={227-232},
document_type={Article},
} 

@ARTICLE{
author={Elek Predrag M,Dzingalasevic Vesna V,Jaramaz Slobodan S,Mickovic Dejan M},
year={2015},
title={Determination Of Detonation Products Equation Of State From Cylinder Test: Analytical Model And Numerical Analysis},
journal={THERMAL SCIENCE},
volume={19},
number={1},
pages={35-48},
document_type={Article},
} 

@ARTICLE{
author={Mickovic Dejan M,Jaramaz Slobodan S,Elek Predrag M,Jaramaz Dragana D,Mickovic Dejan M},
year={2013},
title={Determination of Pressure Profiles Behind Projectiles During Interior Ballistic Cycle},
journal={JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME},
volume={80},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jaramaz Slobodan S,Mickovic Dejan M,Elek Predrag M},
year={2012},
title={Explosive Reactive Armor: Theoretical and Experimental Studies},
journal={27TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOLS. 1 AND 2},
volume={},
number={},
pages={1495-1505},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Elek Predrag M,Jaramaz Slobodan S,Mickovic Dejan M},
year={2012},
title={Modeling of Expansion Dynamics of Explosively Driven Metal Cylinders},
journal={27TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOLS. 1 AND 2},
volume={},
number={},
pages={783-794},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mickovic Dejan M,Jaramaz Slobodan S,Elek Predrag M,Jaramaz Dragana D,Mickovic Dejan M},
year={2012},
title={Determination of Pressure Profiles Behind Projectiles During Interior Ballistic Cycle},
journal={27TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOLS. 1 AND 2},
volume={},
number={},
pages={74-77},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jaramaz Slobodan S,Mickovic Dejan M,Elek Predrag M,Jaramaz Dragana D,Mickovic Dejan M},
year={2012},
title={A Model for Shaped Charge Warhead Design},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={58},
number={6},
pages={403-410},
document_type={Article},
} 

@ARTICLE{
author={Jaramaz Slobodan S,Mickovic Dejan M,Elek Predrag M},
year={2011},
title={Two-phase flows in gun barrel: Theoretical and experimental studies},
journal={INTERNATIONAL JOURNAL OF MULTIPHASE FLOW},
volume={37},
number={5},
pages={475-487},
document_type={Article},
} 

@ARTICLE{
author={Jaramaz Slobodan S,Mickovic Dejan M,Elek Predrag M},
year={2010},
title={Determination of gun propellants erosivity: Experimental and theoretical studies},
journal={EXPERIMENTAL THERMAL AND FLUID SCIENCE},
volume={34},
number={6},
pages={760-765},
document_type={Article},
} 

@ARTICLE{
author={Elek Predrag M,Jaramaz Slobodan S,Mickovic Dejan M},
year={2005},
title={Modeling of perforation of plates and multi-layered metallic targets},
journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
volume={42},
number={3-4},
pages={1209-1224},
document_type={Article},
}