@ARTICLE{
author={Pavlovic Marko D,Dojcinovic Marina B,Sedmak Aleksandar S,Popovic Olivera D,Lazovic Vladimir M},
year={2025},
title={Cavitation Erosion-Process and Development of Testing Methods},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={25},
number={3},
pages={393-398},
document_type={Article},
} 

@ARTICLE{
author={Pejic Jovanka N,Karpe Blaz,Nagode Ales,Dojcinovic Marina B,Kosec Borut,Vlahovic Milica M},
year={2025},
title={Electrochemical and Surface Insights Into X12CrMoWVNbN10-1-1 Steel Corrosion in Chloride Solutions at Variable pH},
journal={MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Pavlovic Marko D,Dojcinovic Marina B,Nikolic Jasmina B,Terzic Anja M,Pavicevic Vladimir P,Drmanic Sasa Z,Kurtanovic Enita},
year={2025},
title={Application of Waste Raw Materials as a Reinforcement for Protective Coatings Based on Pyrophyllite},
journal={CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY},
volume={31},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko D,Terzic Anja M,Dojcinovic Marina B,Radulovic Dragan S},
year={2025},
title={Developing Thermal Insulation Cement-Based Mortars with Recycled Aggregate in Accordance with Net Zero Principles},
journal={SCIENCE OF SINTERING},
volume={57},
number={1},
pages={115-130},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko D,Dojcinovic Marina B,Nikolic Jasmina B,Aleksic Stanko O,Tucovic Nedeljko,Ceganjac Zoran,Drmanic Sasa Z},
year={2025},
title={Cavitation Erosion of Protective Coating Based on Cordierite Filler and Epoxy Matrix},
journal={MATERIALS},
volume={18},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Eric-Cekic Olivera A,Janjatovic Petar D,Dojcinovic Marina B,Rajnovic Dragan M},
year={2024},
title={Cavitation Damage Morphology of the Centrifugally Cast Heat-resistant Alloy-HP40 Nb},
journal={MATERIALS SCIENCE-MEDZIAGOTYRA},
volume={30},
number={4},
pages={568-575},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Eric-Cekic Olivera A,Ciric-Kostic Snezana M,Bogojevic Nebojsa M,Sindjelic Vladimir Z},
year={2024},
title={Effect of Section Thickness on Cavitation Behaviour of Selective Laser Sintered Polyamide 12},
journal={SCIENCE OF SINTERING},
volume={56},
number={2},
pages={161-170},
document_type={Article},
} 

@ARTICLE{
author={Savic Veljko V,Dojcinovic Marina B,Topalovic Vladimir S,Cvijovic-Alagic Ivana Lj,Stojanovic Jovica N,Matijasevic Srdjan D,Grujic Snezana R},
year={2024},
title={The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash},
journal={INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY},
volume={21},
number={7},
pages={6065-6074},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Dojcinovic Marina B,Harbinja Muhamed,Hodic Atif,Stojanovic Mirjana,Ceganjac Zoran,Acimovic Zagorka S},
year={2023},
title={New Types of Protective Coatings and Development of Test Methods},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={23},
number={3},
pages={257-260},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Eric-Cekic Olivera A,Svetel Igor D,Ciric-Kostic Snezana M,Bogojevic Nebojsa M},
year={2023},
title={Cavitation Resistance of the Material PA 3200 GF Produced by Selective Laser Sintering},
journal={SCIENCE OF SINTERING},
volume={55},
number={3},
pages={321-329},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Prokic-Cvetkovic Radica,Sedmak Aleksandar S,Popovic Olivera D,Cvetkovic Ivana,Radu Dorin},
year={2023},
title={Effect of Shielding Gas Arc Welding Process on Cavitation Resistance of Welded Joints of AlMg4.5Mn Alloy},
journal={MATERIALS},
volume={16},
number={13},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Timotijevic Milica,Eric-Cekic Olivera A,Rajnovic Dragan M,Dojcinovic Marina B,Janjatovic Petar D},
year={2022},
title={Microstructure Evolution and Mechanical Properties Degradation of Hpnb Alloy After An Eleven-Year Service},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={22},
number={3},
pages={299-304},
document_type={Article},
} 

@ARTICLE{
author={Terzic Anja M,Dojcinovic Marina B,Milicic Ljiljana R,Stojanovic Jovica N,Radojevic Zagorka M},
year={2021},
title={Cavitation Properties of Rendering Mortars with Micro Silica Addition},
journal={SCIENCE OF SINTERING},
volume={53},
number={4},
pages={445-459},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Cvetkovic Aleksandar,Dojcinovic Marina B,Trumbulovic Ljiljana,Milovanovic Aleksandar},
year={2021},
title={Cavitation Resistance of Basalt-Based Protective Coatings and Epoxy System},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={2},
pages={185-189},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Tihomir M,Brzic Sasa J,Kalagasidis-Krusic Melina T,Nesic Jovica Z,Radovic Ljubica M,Dojcinovic Marina B,Rusmirovic Jelena D},
year={2021},
title={Reuse potential of functionalized thermoplastic waste as reinforcement for thermoset polymers: Mechanical properties and erosion resistance},
journal={JOURNAL OF COMPOSITE MATERIALS},
volume={55},
number={28},
pages={4207-4220},
document_type={Article},
} 

@ARTICLE{
author={Ashor Almabrok A,Vuksanovic Marija M,Tomic Natasa Z,Petrovic Milos MI,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Radojevic Vesna J,Jancic-Heinemann Radmila M},
year={2020},
title={Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance},
journal={POLYMER BULLETIN},
volume={77},
number={7},
pages={3603-3620},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Dojcinovic Marina B,Prokic-Cvetkovic Radica,Andric Ljubisa D},
year={2019},
title={The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt},
journal={SCIENCE OF SINTERING},
volume={51},
number={4},
pages={409-419},
document_type={Article},
} 

@ARTICLE{
author={Vuksanovic Marija M,Tomic Natasa Z,Gajic-Kvascev Maja D,Djokic Veljko R,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Jancic-Heinemann Radmila M},
year={2019},
title={The influence of alumina crystal structures on the morphology and surface erosion of PMMA composite materials exposed to cavitation testing},
journal={WEAR},
volume={436},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Dojcinovic Marina B,Prokic-Cvetkovic Radica,Andric Ljubisa D,Ceganjac Zoran,Trumbulovic Ljiljana},
year={2019},
title={Cavitation Wear of Basalt-Based Glass Ceramic},
journal={MATERIALS},
volume={12},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vuksanovic Marija M,Gajic-Kvascev Maja D,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Jancic-Heinemann Radmila M},
year={2018},
title={New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach},
journal={MATERIALS CHARACTERIZATION},
volume={144},
number={},
pages={113-119},
document_type={Article},
} 

@ARTICLE{
author={Eric-Cekic Olivera A,Dojcinovic Marina B,Rajnovic Dragan M,Sidjanin Leposava P,Balos Sebastian S},
year={2018},
title={Microstructure and cavitation behaviour of alloyed austempered ductile irons},
journal={INTERNATIONAL JOURNAL OF CAST METALS RESEARCH},
volume={31},
number={5},
pages={279-287},
document_type={Article},
} 

@ARTICLE{
author={Algellai Ahmed A,Vuksanovic Marija M,Tomic Natasa Z,Marinkovic Aleksandar D,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Jancic-Heinemann Radmila M},
year={2018},
title={Improvement of cavitation resistance of composite films using functionalized alumina particles},
journal={HEMIJSKA INDUSTRIJA},
volume={72},
number={4},
pages={205-213},
document_type={Article},
} 

@ARTICLE{
author={Stefanovic Andrea B,Jovanovic Jelena R,Balanc Bojana D,Sekuljica Natasa Z,Jakovetic-Tanaskovic Sonja M,Dojcinovic Marina B,Knezevic-Jugovic Zorica D},
year={2018},
title={Influence of ultrasound probe treatment time and protease type on functional and physicochemical characteristics of egg white protein hydrolysates},
journal={POULTRY SCIENCE},
volume={97},
number={6},
pages={2218-2229},
document_type={Article},
} 

@ARTICLE{
author={Algellai Ahmed A,Tomic Natasa Z,Vuksanovic Marija M,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Radojevic Vesna J,Jancic-Heinemann Radmila M},
year={2018},
title={Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate},
journal={COMPOSITES PART B-ENGINEERING},
volume={140},
number={},
pages={164-173},
document_type={Article},
} 

@ARTICLE{
author={Martinovic Sanja P,Vlahovic Milica M,Dojcinovic Marina B,Pavlovic Marko,Volkov-Husovic Tatjana D},
year={2018},
title={Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses},
journal={MATERIALS LETTERS},
volume={220},
number={},
pages={136-139},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Dojcinovic Marina B,Martinovic Sanja P,Vlahovic Milica M,Stevic Zoran M,Jovanovic Marina N,Volkov-Husovic Tatjana D},
year={2017},
title={Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic},
journal={SCIENCE OF SINTERING},
volume={49},
number={2},
pages={175-185},
document_type={Article},
} 

@ARTICLE{
author={Stefanovic Andrea B,Jovanovic Jelena R,Dojcinovic Marina B,Levic Steva M,Nedovic Viktor A,Bugarski Branko M,Knezevic-Jugovic Zorica D},
year={2017},
title={Effect of the Controlled High-Intensity Ultrasound on Improving Functionality and Structural Changes of Egg White Proteins},
journal={FOOD AND BIOPROCESS TECHNOLOGY},
volume={10},
number={7},
pages={1224-1239},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Marija M,Dojcinovic Marina B,Trifunovic Dejan D,Volkov-Husovic Tatjana D,Jancic-Heinemann Radmila M},
year={2016},
title={Comparison of Morphological Parameters of Ceramic Materials Surface Damage Exposed to Thermal Shock and Cavitation Erosion},
journal={SCIENCE OF SINTERING},
volume={48},
number={3},
pages={371-377},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Jelena R,Stefanovic Andrea B,Sekuljica Natasa Z,Jakovetic-Tanaskovic Sonja M,Dojcinovic Marina B,Bugarski Branko M,Knezevic-Jugovic Zorica D},
year={2016},
title={Ultrasound Pretreatment as an Useful Tool to Enhance Egg White Protein Hydrolysis: Kinetics, Reaction Model, and Thermodinamics},
journal={JOURNAL OF FOOD SCIENCE},
volume={81},
number={11},
pages={C2664-C2675},
document_type={Article},
} 

@ARTICLE{
author={Pavlovic Marko,Dojcinovic Marina B,Martinovic Sanja P,Vlahovic Milica M,Stevic Zoran M,Volkov-Husovic Tatjana D},
year={2016},
title={Non destructive monitoring of cavitation erosion of cordierite based coatings},
journal={COMPOSITES PART B-ENGINEERING},
volume={97},
number={},
pages={84-91},
document_type={Article},
} 

@ARTICLE{
author={Cosic Milena,Dojcinovic Marina B,Acimovic-Pavlovic Zagorka S},
year={2014},
title={Fabrication and behaviour of Al-Si/SiC composite in cavitation conditions},
journal={INTERNATIONAL JOURNAL OF CAST METALS RESEARCH},
volume={27},
number={1},
pages={49-55},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Eric Olivera A,Rajnovic Dragan M,Sidjanin Leposava P,Balos Sebastian S},
year={2013},
title={Effect of austempering temperature on cavitation behaviour of unalloyed ADI material},
journal={MATERIALS CHARACTERIZATION},
volume={82},
number={},
pages={66-72},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B},
year={2013},
title={Roughness Measurement as An Alternative Method in Evaluation of Cavitation Resistance of Steel},
journal={HEMIJSKA INDUSTRIJA},
volume={67},
number={2},
pages={323-330},
document_type={Article},
} 

@ARTICLE{
author={Dimitrijevic Marija M,Dojcinovic Marina B,Devecerski Aleksandar B,Jancic-Heinemann Radmila M,Volkov-Husovic Tatjana D},
year={2013},
title={The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation},
journal={SCIENCE OF SINTERING},
volume={45},
number={1},
pages={97-105},
document_type={Article},
} 

@ARTICLE{
author={Martinovic Sanja P,Vlahovic Milica M,Boljanac Tamara Dj,Dojcinovic Marina B,Volkov-Husovic Tatjana D},
year={2013},
title={Cavitation resistance of refractory concrete: Influence of sintering temperature},
journal={JOURNAL OF THE EUROPEAN CERAMIC SOCIETY},
volume={33},
number={1},
pages={7-14},
document_type={Article},
} 

@ARTICLE{
author={Cosic Milena,Acimovic-Pavlovic Zagorka S,Terzic Anja M,Dojcinovic Marina B,Pavlovic Ljubica J},
year={2012},
title={The Possibility of Obtaining. Composite Al18wt%Si/Sic by Compocasting Process},
journal={MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II},
volume={},
number={},
pages={249-252},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Cosic Milena,Dojcinovic Marina B,Acimovic-Pavlovic Zagorka S},
year={2012},
title={Characterization of Microstructure and Properties of Hypereutectic Al18Wt%Si Alloys Reinforced by 10%SiC Alloy},
journal={METALURGIA INTERNATIONAL},
volume={17},
number={6},
pages={102-105},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B},
year={2011},
title={Comparative cavitation erosion test on steels produced by ESR and AOD refining},
journal={MATERIALS SCIENCE-POLAND},
volume={29},
number={3},
pages={216-222},
document_type={Article},
} 

@ARTICLE{
author={Martinovic Sanja P,Vlahovic Milica M,Dojcinovic Marina B,Volkov-Husovic Tatjana D,Majstorovic Jelena B},
year={2011},
title={Thermomechanical Properties and Cavitation Resistance of a High-Alumina Low-Cement Castable},
journal={INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY},
volume={8},
number={5},
pages={1115-1124},
document_type={Article},
} 

@ARTICLE{
author={Martinovic Sanja P,Dojcinovic Marina B,Dimitrijevic Marija M,Devecerski Aleksandar B,Matovic Branko Z,Volkov-Husovic Tatjana D},
year={2010},
title={Implementation of image analysis on thermal shock and cavitation resistance testing of refractory concrete},
journal={JOURNAL OF THE EUROPEAN CERAMIC SOCIETY},
volume={30},
number={16},
pages={3303-3309},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Volkov-Husovic Tatjana D},
year={2008},
title={Cavitation damage of the medium carbon steel: Implementation of image analysis},
journal={MATERIALS LETTERS},
volume={62},
number={6-7},
pages={953-956},
document_type={Article},
} 

@ARTICLE{
author={Dojcinovic Marina B,Markovic Srdjan V},
year={2006},
title={The morphology of cavitation damage of heat-treated medium carbon steel},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={71},
number={8-9},
pages={977-984},
document_type={Article},
}