@ARTICLE{
author={Pataric Aleksandra S,Djurdjevic Mile B,Manasijevic Srecko,Stopic Srecko R,Mihailovic Marija D},
year={2026},
title={Composition Driven Redistribution of Feeding Mechanisms in Hypoeutectic Al-Si-Mg Alloys},
journal={MATERIALS},
volume={19},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko},
year={2026},
title={Improving Casting Simulation Accuracy Through Thermal Analysis of Aluminum Alloys},
journal={CRYSTALS},
volume={16},
number={3},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Pataric Aleksandra S,Djurdjevic Mile B,Manasijevic Srecko,Stopic Srecko R,Mihailovic Marija D},
year={2025},
title={The Role of Silicon During Solidification Process of Cast Al-Si-Mg Alloys},
journal={MATERIALS},
volume={18},
number={21},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Jovanovic Vladimir D,Stopic Srecko R},
year={2025},
title={Quantifying Latent Heat in AlSi5Cu Alloys (with 1, 2, and 4% of Cu by Mass) via DSC, Thermal Analysis, and Commercial Software},
journal={METALS},
volume={15},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Pataric Aleksandra S,Stopic Srecko R,Mihailovic Marija D},
year={2025},
title={Comprehensive Modeling of Major (Cu) and Minor (Sr) Alloying Elements Impact on the Crack Susceptibility Coefficient of Cast Hypoeutectic AlSi6Cu(1-4 wt.%) Alloys},
journal={MINING METALLURGY & EXPLORATION},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Pataric Aleksandra S,Stopic Srecko R,Mihailovic Marija D},
year={2024},
title={Impact of Mg on the Feeding Ability of Cast Al-Si7-Mg(0_0.2_0.4_0.6) Alloys},
journal={CRYSTALS},
volume={14},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Jovanovic Vladimir D,Komatina Mirko S,Stopic Srecko R},
year={2024},
title={The Specificity of Determining the Latent Heat of Solidification of Cast Hypoeutectic AlSiCu Alloys Using the DSC Method},
journal={MATERIALS},
volume={17},
number={17},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Pataric Aleksandra S,Mihailovic Marija D},
year={2024},
title={Challenges by latent heat calculation - Competition among analytical and computational methods},
journal={INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER},
volume={157},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Komatina Mirko S},
year={2024},
title={Determination of latent heats for hypoeutectic AlSi<sub>7</sub>Cu(1-4) and AlSi<sub>9</sub>Cu(1-4) alloys applying thermal analysis technique},
journal={JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
volume={149},
number={5},
pages={2049-2056},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Mihailovic Marija D,Stopic Srecko R},
year={2023},
title={From Bauxite as a Critical Material to the Required Properties of Cast Aluminum Alloys for Use in Electro Automotive Parts},
journal={METALS},
volume={13},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Brodarac Zovko Z,Dolic Natalija,Djurdjevic Mile B,Bukvic Aleksandar G},
year={2023},
title={An Analysis of the Metal Connection Using Metallographic Investigation},
journal={METALLURGIST},
volume={67},
number={5-6},
pages={849-856},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Smiljanic Slavko N,Ristic Marko D},
year={2023},
title={Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace},
journal={CRYSTALS},
volume={13},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Ponjavic Milan M},
year={2023},
title={Fading of Sodium in AlSi7Cu0.5Mg Alloy Studied Using Thermal Analysis Technique},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={17},
number={3},
pages={2138-2146},
document_type={Article},
} 

@ARTICLE{
author={Huber Gerhard,Djurdjevic Mile B,Manasijevic Srecko},
year={2019},
title={Determination some thermo-physical and metallurgical properties of aluminum alloys using their known chemical composition},
journal={INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER},
volume={139},
number={},
pages={548-553},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Radisa Radomir,Brodarac Zdenka Zovko,Dolic Natalija,Djurdjevic Mile B},
year={2015},
title={Al-Fin Bond in Aluminum Piston Alloy & Austenitic Cast Iron Insert},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={9},
number={4},
pages={27-32},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Dolic Natalija,Djurdjevic Mile B,Brodarac Zdenka Zovko,Radisa Radomir},
year={2015},
title={Analysis of piston microstructure in the most critical zones},
journal={KOVOVE MATERIALY-METALLIC MATERIALS},
volume={53},
number={5},
pages={357-363},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Dolic Natalija,Djurdjevic Mile B,Misic Natasa Z,Davitkov Novica},
year={2015},
title={The intermetallic bonding between a ring carrier and aluminum piston alloy},
journal={REVISTA DE METALURGIA},
volume={51},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Odanovic Zoran D},
year={2014},
title={Analysis of the solidification path of Al-Si9-Cu(1-4) alloys using thermal analysis technique},
journal={METALLURGIA ITALIANA},
volume={},
number={9},
pages={23-29},
document_type={Article},
} 

@ARTICLE{
author={Manasijevic Srecko,Dolic Natalija,Zovko-Brodarac Zdenka,Djurdjevic Mile B,Radisa Radomir},
year={2014},
title={An Analysis of Intermetallic Bonding between a Ring Carrier and an Aluminum Piston Alloy},
journal={METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE},
volume={45A},
number={10},
pages={4580-4587},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Odanovic Zoran D,Dolic Natalija,Radisa Radomir},
year={2014},
title={Quantification of the Copper Phase(S) in Al-5Si-(1-4)Cu Alloys Using a Cooling Curve Analysis},
journal={MATERIALI IN TEHNOLOGIJE},
volume={48},
number={2},
pages={299-304},
document_type={Article},
} 

@ARTICLE{
author={Odanovic Zoran D,Arsic Miodrag A,Grabulov Vencislav K,Djurdjevic Mile B},
year={2013},
title={Investigation of the Repair Welding Technology Using Ni Base Electrode},
journal={STRUCTURAL INTEGRITY OF WELDED STRUCTURES},
volume={814},
number={},
pages={25-32},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Odanovic Zoran D,Dolic Natalija},
year={2013},
title={Calculation of Liquidus Temperature for Aluminum and Magnesium Alloys Applying Method of Equivalency},
journal={ADVANCES IN MATERIALS SCIENCE AND ENGINEERING},
volume={},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Manasijevic Srecko,Odanovic Zoran D,Radisa Radomir},
year={2013},
title={Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5-9)Si-(1-4)Cu (wt.%) alloys},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={104},
number={9},
pages={865-873},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Huber Gerhard,Odanovic Zoran D},
year={2013},
title={Synergy between thermal analysis and simulation},
journal={JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
volume={111},
number={2},
pages={1365-1373},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Sokolowski JH,Odanovic Zoran D},
year={2012},
title={Determination of dendrite coherency point characteristics using first derivative curve versus temperature},
journal={JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
volume={109},
number={2},
pages={875-882},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Odanovic Zoran D,Zak Hennadiy},
year={2012},
title={Detection of Dendrite Coherency Temperature of Aluminum Alloys Using Single Thermocouple Technique},
journal={PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY},
volume={49},
number={2},
pages={86-98},
document_type={Article},
} 

@ARTICLE{
author={Odanovic Zoran D,Djurdjevic Mile B,Pavlovic-Krstic J,Arsic Miodrag A,Katavic Boris T},
year={2012},
title={Some Applications of the Image Analysis in the Metal Material Science},
journal={ACTA PHYSICA POLONICA A},
volume={121},
number={1},
pages={111-113},
document_type={Article},
} 

@ARTICLE{
author={Djurdjevic Mile B,Odanovic Zoran D,Talijan Nadezda M},
year={2011},
title={Characterization of the Solidification Path of AlSi5Cu(1-4 wt.%) Alloys Using Cooling Curve Analysis},
journal={JOM},
volume={63},
number={11},
pages={51-57},
document_type={Article},
} 

@ARTICLE{
author={Odanovic Zoran D,Djurdjevic Mile B,Byczynski G,Katavic Boris T,Grabulov Vencislav K},
year={2009},
title={Image analysis application in metallurgical engineering and quality control},
journal={MATERIALS CHARACTERISATION IV: COMPUTATIONAL METHODS AND EXPERIMENTS},
volume={64},
number={},
pages={259-270},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Odanovic Zoran D,Djurdjevic Mile B},
year={2004},
title={Investigation of the mechanism of mercury removal from a silver dental amalgam alloy},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={69},
number={12},
pages={1111-1120},
document_type={Article},
} 

@ARTICLE{
author={Odanovic Zoran D,Djurdjevic Mile B},
year={2004},
title={Investigation of the mechanism of mercury removal from a silver dental amalgam alloy},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={69},
number={12},
pages={1111-1120},
document_type={Article},
}