@ARTICLE{
author={Barz Cristian,Onysko Oleh,Kopei Volodymyr,Kusyi Yaroslav,Shkitsa Lesia,Dasic Predrag V,Baskutis Saulius},
year={2026},
title={General Geometric Model for the Cutting Edge in Thread Turning},
journal={MACHINES},
volume={14},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Yagyaev Elmar,Dzhemalyadinov Ruslan,Dzhemilov Eshreb,Dasic Predrag V,Bedir Fevzi},
year={2025},
title={Modeling the Process of External Cylindrical Grinding with the Consideration of the Restoration of the Parameters of the Technological System},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={640-648},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Sokolovska Iryna,Klimov Roman,Furiak Olha,Dasic Predrag V},
year={2025},
title={Design Optimization of Heaters},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={620-627},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Klimov Roman,Dasic Predrag V,Turmanidze Raul},
year={2025},
title={Influence of Main Factors on the Formation of Liquid Fuels Resistant to Stratification},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={564-572},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lysenko Tetiana,Tonkonogyi Volodymyr,Bovnegra Liubov,Rudyi Oleksandr,Dasic Predrag V},
year={2025},
title={Cellular Automata Method for Modeling Heat and Mass Transfer in Heterogeneous Media with Barriers},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={547-553},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Garashchenko Yaroslav,Fedorovich Vladimir,Ostroverkh Yevgeniy,Dasic Predrag V,Poharskyi Andrii},
year={2025},
title={Analysis of Error Formation in Selective Laser Sintering Based on Statistical Modeling},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VIII, VOL 1},
volume={1482},
number={},
pages={538-546},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kysylevska Lona,Prokopovich Ihor,Bezverkhniuk Tatiana,Levinskyi Oleksandr,Dasic Predrag V},
year={2025},
title={Improvement of the Production Technology of Packaged Mineral Sodium Chloride Water Using the Principles of Risk Management},
journal={ADVANCED MANUFACTURING PROCESSES VI, INTERPARTNER-2024},
volume={},
number={},
pages={724-734},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tufegdzic Milica,Kovalevskyy Sergiy,Dasic Predrag V,Miskovic Aleksandar Z},
year={2025},
title={Modeling Dynamic Response and Stability of the Combined Mechanical System with Two Degrees of Freedom},
journal={ADVANCED MANUFACTURING PROCESSES VI, INTERPARTNER-2024},
volume={},
number={},
pages={639-650},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Klimov Roman,Sokolovska Iryna,Dasic Predrag V},
year={2024},
title={Study of Heat Treatment Processes in the Production of Porous Thermal Insulation Materials},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VII, VOL 1, NT 2024},
volume={1069},
number={},
pages={603-610},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tonkonogyi Volodymyr,Holofieieva Maryna,Dasic Predrag V,Klimov Sergii,Buriachenko Oleksii},
year={2024},
title={Fractal Dimension Measurement Uncertainty},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VII, VOL 1, NT 2024},
volume={1069},
number={},
pages={493-501},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lavrinenko Valerii,Ilnytska Halyna,Smokvyna Volodymyr,Dasic Predrag V,Fedorovich Vladimir},
year={2024},
title={Investigation of Conditions of Directed Thermal Influence on Changes of Physical and Mechanical Properties of Diamond Grains in a Grinding Wheels},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VII, VOL 1, NT 2024},
volume={1069},
number={},
pages={167-183},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tufegdzic Milica,Miskovic Aleksandar Z,Dasic Predrag V,Nedic Vladimir M},
year={2024},
title={Statistical Modeling of Ransomware Attacks Trends},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VII, VOL 2, NT-2024},
volume={1070},
number={},
pages={87-97},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Onysko Oleh,Kopei Volodymyr,Barz Cristian,Kusyi Yaroslav,Baskutis Saulius,Bembenek Michal,Dasic Predrag V,Panchuk Vitalii},
year={2024},
title={Analytical Model of Tapered Thread Made by Turning from Different Machinability Workpieces},
journal={MACHINES},
volume={12},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lysenko Oleksandr,Tetiana Kalinina,Zagorulko Iryna,Dasic Predrag V,Popil Oleg},
year={2023},
title={Simulation of the Structure and Formation Kinetics of a Metastable Modification of Cerium Upon Quenching from a Liquid State},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VI, VOL 1},
volume={687},
number={},
pages={112-122},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tonkonogyi V,Holofieieva M,Holofieiev Y,Klimov S,Naumenko Y,Dasic Predrag V},
year={2023},
title={Prediction of Defects in the Structure of Non-Metallic Heterogeneous Materials},
journal={JOURNAL OF ENGINEERING SCIENCES-UKRAINE},
volume={10},
number={2},
pages={C19-C25},
document_type={Article},
} 

@ARTICLE{
author={Prokopovych IV,Kokhanov AB,Khamitov VM,Tikhenko VM,Dasic Predrag V},
year={2023},
title={Standardizing Life Cycle Organization: A Synergetic Quality Management Approach},
journal={JOURNAL OF ENGINEERING SCIENCES-UKRAINE},
volume={10},
number={1},
pages={B1-B7},
document_type={Article},
} 

@ARTICLE{
author={Garashchenko Yaroslav,Fedorovich Vladimir,Ostroverkh Yevgeniy,Dasic Predrag V,Andjelkovic Maja,Onalla Halima},
year={2023},
title={Statistical Analysis of Deviations from the Correct Shape of Surface Depending on Product Orientation in Workspace of Additive Machine},
journal={MACHINES},
volume={11},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kopei Volodymyr,Onysko Oleh,Barz Christian P,Dasic Predrag V,Panchuk Vitalii},
year={2023},
title={Designing a Multi-Agent PLM System for Threaded Connections Using the Principle of Isomorphism of Regularities of Complex Systems},
journal={MACHINES},
volume={11},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Tkachev Anatoliy,Tkachev Aleksey,Dasic Predrag V,Prokopovych Ihor,Kostina Maryna},
year={2022},
title={Static Stiffness of the Crane Bridges Under Moving Load Distribution},
journal={ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021},
volume={},
number={},
pages={43-52},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kozlov Igor,Skalozubov Vladimir,Spinov Vladislav,Spinov Dmitriy,Dasic Predrag V},
year={2021},
title={Substantiation of Pressure Compensator Construction for Nuclear Power Plants in Emergency Situations},
journal={ADVANCED MANUFACTURING PROCESSES II},
volume={},
number={},
pages={675-684},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Orgiyan Alexandr,Oborskyi Gennadiy,Balaniuk Anna,Tonkonogyi Vladimir,Dasic Predrag V},
year={2021},
title={Development of Calculation of Statistical and Dynamic Errors upon Fine Boring with Console Boring Bars},
journal={ADVANCED MANUFACTURING PROCESSES II},
volume={},
number={},
pages={588-597},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Turmanidze Raul,Dasic Predrag V,Popkhadze Giorgi},
year={2020},
title={The Main Stages of the Implementation of the Reform of Industry-4.0 and Readiness of Georgian Enterprises for Their Realization},
journal={7TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020)},
volume={},
number={},
pages={751-752},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Karabegovic Isak,Turmanidze Raul,Dasic Predrag V},
year={2020},
title={Global Trend of Implementation of Industrial Robots Relating to Industry 4.0},
journal={ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1},
volume={},
number={},
pages={147-155},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lysenko Tatiana,Shinsky Vladimyr,Kreitser Kyryll,Dotsenko Vadym,Dasic Predrag V},
year={2020},
title={New Binding Materials Based on Recycling Polystyrene Foam for Foundry},
journal={ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019)},
volume={},
number={},
pages={424-432},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Karabegovic Isak,Turmanidze Raul,Dasic Predrag V},
year={2020},
title={Robotics and Automation as a Foundation of the Fourth Industrial Revolution - Industry 4.0},
journal={ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019)},
volume={},
number={},
pages={128-136},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Usov Anatolii V,Niekrasova Liubov A,Dasic Predrag V},
year={2020},
title={Management of Development of Manufacturing Enterprises in Decentralization Conditions},
journal={MANAGEMENT AND PRODUCTION ENGINEERING REVIEW},
volume={11},
number={4},
pages={46-55},
document_type={Article},
} 

@ARTICLE{
author={Burya Aleksandr I,Yeriomina Ye A,Volokh VI,Dasic Predrag V},
year={2020},
title={Study of the Effect of Transducer Thickness and Direction on the Coercive Force Magnitude},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II},
volume={76},
number={},
pages={229-237},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tonkonogyi Vladimir,Dasic Predrag V,Rybak Olga,Lysenko Tetiana},
year={2020},
title={Application of the Modified Genetic Algorithm for Optimization of Plasma Coatings Grinding Process},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II},
volume={76},
number={},
pages={199-211},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zivkovic Milutin,Dasic Predrag V,Pravdic Predrag S},
year={2020},
title={Analysis of the Comparative Advantages of Gear Pumps Indicators},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II},
volume={76},
number={},
pages={158-164},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tonkonogyi Vladimir,Sidelnykova Tetiana,Dasic Predrag V,Yakimov Alexey,Bovnegra Liubov},
year={2020},
title={Improving the Performance Properties of Abrasive Tools at the Stage of Their Operation},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II},
volume={76},
number={},
pages={136-145},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zivkovic Milutin,Dasic Predrag V,Petrovic Zvonko},
year={2019},
title={Influence of New Technologies on Higher Energy Efficiency of Hydrostatic Devices and Systems},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION},
volume={42},
number={},
pages={386-396},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Elezovic Natasa M,Ilic-Komatina Danijela,Dervisevic Irma,Ketin Sonja B,Dasic Predrag V},
year={2018},
title={Analysis of Swqi Index of the River Ibar (Serbia)},
journal={FRESENIUS ENVIRONMENTAL BULLETIN},
volume={27},
number={4},
pages={2505-2509},
document_type={Article},
} 

@ARTICLE{
author={Dasic Predrag V,Hutanu C,Jevremovic Vladeta,Dobra Remus,Risteiu M,Ileana I},
year={2017},
title={High Accuracy Investigation of Microwave Absorption in Polymer Electrical Components on Motherboard of Computers},
journal={INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2017},
volume={209},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Risteiu M,Lorincz A,Dobra Remus,Dasic Predrag V,Andras I,Roventa M},
year={2017},
title={Designing Pattern Recognition-Based Method for Fast Visual Inspection of the Bucket Wheel Excavator Lattice Structure},
journal={INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2017},
volume={209},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kuzin VV,Fedorov M Yu,Dasic Predrag V},
year={2017},
title={Mathematical Modeling of Thermomechanical Processes in the Boundary Layer of a TiC/TiN-Coating Applied to Nitride Ceramic},
journal={REFRACTORIES AND INDUSTRIAL CERAMICS},
volume={58},
number={4},
pages={457-461},
document_type={Article},
} 

@ARTICLE{
author={Kuzin VV,Fedorov M Yu,Dasic Predrag V},
year={2017},
title={Stressed State of Boundary Between TiC/TiN-Coating Layers Applied to Nitride Ceramic Under Action of a Force Load},
journal={REFRACTORIES AND INDUSTRIAL CERAMICS},
volume={58},
number={3},
pages={338-342},
document_type={Article},
} 

@ARTICLE{
author={Ketin Sonja B,Dasic Predrag V,Vukanic Vera D,Jaksic Tatjana R,Vasic Predrag S},
year={2017},
title={A Contribution to Chemical Contamination of Groundwater},
journal={FRESENIUS ENVIRONMENTAL BULLETIN},
volume={26},
number={10},
pages={6104-6111},
document_type={Article},
} 

@ARTICLE{
author={Avdeenko Anatoly P,Belova Elena A,Dasic Predrag V,Konovalova Svetlana A,Baklanova Larisa V,Krstic Sanja S,Milosavljevic Milutin M},
year={2017},
title={Efficient two-frequency ultrasound extraction of beta-carotene from the fungus Blakeslea trispora},
journal={HEMIJSKA INDUSTRIJA},
volume={71},
number={4},
pages={329-336},
document_type={Article},
} 

@ARTICLE{
author={Tosovic Radule D,Dasic Predrag V,Ristovic Ivica M},
year={2016},
title={Sustainable Use of Metallic Mineral Resources of Serbia from An Environmental Perspective},
journal={ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL},
volume={15},
number={9},
pages={2075-2084},
document_type={Article},
} 

@ARTICLE{
author={Khoroshailo Vadim,Kovalov Viktor,Dasic Predrag V},
year={2016},
title={Improving of Vibration Resistance of Boring Tools by Big Diameter Holes Tooling on Lathe},
journal={9TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2015},
volume={22},
number={},
pages={153-160},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kovalov Viktor,Antonenko Yana,Dasic Predrag V},
year={2016},
title={Method of Structural Design of Heavy Machine Tools},
journal={9TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2015},
volume={22},
number={},
pages={146-152},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ketin Sonja B,Dasic Predrag V,Neskovic Slobodan,Kostic Boban,Biocanin Rade R},
year={2016},
title={The Technological Process of Solidification for the Treatment of Hazardous Waste},
journal={FRESENIUS ENVIRONMENTAL BULLETIN},
volume={25},
number={6},
pages={1877-1882},
document_type={Article},
} 

@ARTICLE{
author={Dasic Predrag V,Moldovan Liviu,Grama Lucian},
year={2015},
title={Status and analysis of scientific journals indexed in SCI, SCI-E and SSCI citation databases from Romania and Serbia},
journal={8TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2014},
volume={19},
number={},
pages={1075-1082},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Radosavljevic Slobodan A,Dasic Predrag V,Radosavljevic Milan,Radosavljevic Jovana},
year={2015},
title={Modern aspects of mining in correlation function of risk and environmental sustainability},
journal={8TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2014},
volume={19},
number={},
pages={387-394},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kovalov Viktor,Vasilchenko Yana,Dasic Predrag V},
year={2015},
title={Development of the integral complex of optimal control of heavy machine tools adaptive technological system for wind-power engineering parts},
journal={8TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2014},
volume={19},
number={},
pages={145-152},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosavljevic Branimir,Pesic Radivoje B,Dasic Predrag V},
year={2015},
title={Binary Logistic Regression Modeling of Idle CO Emissions in Order to Estimate Predictors Influences in Old Vehicle Park},
journal={MATHEMATICAL PROBLEMS IN ENGINEERING},
volume={},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lekic Milena,Cvejic Stana,Dasic Predrag V},
year={2012},
title={Iteration method for solving differential equations of second order oscillations},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={4},
pages={1751-1759},
document_type={Article},
} 

@ARTICLE{
author={Damnjanovic Zvonko R,Mancic Dragan D,Dasic Predrag V,Lazarevic Dragoljub B,Pantovic Radoje V},
year={2012},
title={Thermoelastic stress analysis based on infrared thermography},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={2},
pages={914-919},
document_type={Article},
} 

@ARTICLE{
author={Serifi Veis,Dasic Predrag V,Curcic Srecko,Stojkovic Zoran},
year={2012},
title={Algorithm approach of the implementation of investment building project with the analysis of optimal choice of construction assignment},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={1},
pages={305-308},
document_type={Article},
} 

@ARTICLE{
author={Zoller Carol,Dasic Predrag V,Dobra Remus,Pantovic Radoje V,Damnjanovic Zvonko R},
year={2012},
title={Sequential algorithm and fuzzy logic to optimum control the ore gridding aggregates},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={1},
pages={279-284},
document_type={Article},
} 

@ARTICLE{
author={Milenkovic Dragan D,Dasic Predrag V,Nedeff Valentin,Mosnegutu Emilian},
year={2009},
title={Analysis of Regression Models of Maximal Adsorption on High-Porosity Adsorbents with and without Ultrasound Application},
journal={REVISTA DE CHIMIE},
volume={60},
number={7},
pages={706-710},
document_type={Article},
} 

@ARTICLE{
author={Serifi Veis,Dasic Predrag V,Jecmenica Ratomir,Labovic Dragana},
year={2009},
title={Functional and Information Modeling of Production Using IDEF Methods},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={2},
pages={131-140},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dasic Predrag V,Kopac Janez,Petropoulos Georgios P},
year={2009},
title={Editorial for the special issue of Journal of Mechanical Engineering to the 8(th) International Conference of Research and Development in Mechanical Industry (RaDMI 2008)},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={2},
pages={81-82},
document_type={Editorial Material},
} 

@ARTICLE{
author={Milenkovic Dragan D,Dasic Predrag V,Veljkovic Vlada B},
year={2009},
title={Ultrasound-assisted adsorption of copper(II) ions on hazelnut shell activated carbon},
journal={ULTRASONICS SONOCHEMISTRY},
volume={16},
number={4},
pages={557-563},
document_type={Article},
} 

@ARTICLE{
author={Anghel Cornelia,Petropoulos Georgios P,Vaxevanidis Nikolaos M,Dasic Predrag V},
year={2008},
title={STATISTICAL MODELING OF BASIC MACHINABILITY PARAMETERS IN DRILLING OF METALS},
journal={ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM - INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON  NEXT GENERATION OF INTELLIGENT SYSTEMS AND SOLUTIONS},
volume={},
number={},
pages={23-24},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Dasic Predrag V,Natsis Athanassios,Petropoulos Georgios P},
year={2008},
title={Models of reliability for cutting tools: Examples in manufacturing and agricultural engineering},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={54},
number={2},
pages={122-130},
document_type={Article},
} 

@ARTICLE{
author={Dasic Predrag V,Franek Friedrich,Assenova E,Radovanovic Miroslav R},
year={2003},
title={International standardization and organizations in the field of tribology},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={55},
number={6},
pages={287-291},
document_type={Article},
}