@ARTICLE{
author={Sokac Mario Z,Milosevic Aleksandar D,Santosi Zeljko Dj,Vukelic Djordje B,Budak Igor M},
year={2025},
title={Design and Verification of a New Fixture for Machining of Porous Blocks for Medical CAD/CAM Systems},
journal={APPLIED SCIENCES-BASEL},
volume={15},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ilic-Micunovic Milana,Budak Igor M,Vukelic Djordje B,Djurovic-Koprivica Daniela J,Kuzmanovic Milos,Agarski Boris,Puskar Tatjana M},
year={2024},
title={Investigation of the Geometric Characteristics of Inhalable Particles Emitted from the Process of Grinding Dental Restorations},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vasiljevic Ivana ST,Santosi Zeljko Dj,Obradovic Milos R,Popkonstantinovic Branislav D,Budak Igor M,Obradovic Ratko},
year={2023},
title={Copyright Protection of 3D Digitized Sculptures by Use of Haptic Device for Adding Local-Imperceptible Bumps},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={30},
number={6},
pages={2001-2008},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Budak Igor M,Ilic-Micunovic Milana,Vukelic Djordje B},
year={2023},
title={Life cycle assessment of injection moulding tools and multicomponent plastic cap production},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={413},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Radovic Sanja M,Sekulic MT,Agarski Boris,Pap Sabolc,Vukelic Djordje B,Budak Igor M,Prodanovic Jelena M},
year={2023},
title={Life cycle assessment of new bio-based coagulant production for sustainable wastewater treatment},
journal={INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY},
volume={20},
number={7},
pages={7433-7462},
document_type={Article},
} 

@ARTICLE{
author={Santosi Zeljko Dj,Budak Igor M,Sokac Mario Z,Kuzmanovic Milos,Vukelic Djordje B},
year={2022},
title={An Innovative Photogrammetric System for 3D Digitization of Dental Models},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={29},
number={5},
pages={1560-1566},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Prica Miljana Dj,Ivanov Vitalii,Jovicic G,Budak Igor M,Luzanin Ognjan},
year={2022},
title={Optimization of Surface Roughness Based on Turning Parameters and Insert Geometry},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={21},
number={3},
pages={417-428},
document_type={Article},
} 

@ARTICLE{
author={Djurovic-Koprivica Daniela J,Puskar Tatjana M,Budak Igor M,Sokac Mario Z,Jeremic-Knezevic Milica,Maletin Aleksandra Z,Milekic Bojana R,Vukelic Djordje B},
year={2022},
title={Influence of Implant Impression Methods, Polymer Materials, and Implant Angulation on the Accuracy of Dental Models},
journal={POLYMERS},
volume={14},
number={14},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokac Mario Z,Katic Marko,Santosi Zeljko Dj,Vukelic Djordje B,Budak Igor M,Durakbasa Numan M},
year={2022},
title={Investigation of Influence by Different Segmentation Parameters on Surface Accuracy in Industrial X-ray Computed Tomography},
journal={DIGITIZING PRODUCTION SYSTEMS, ISPR2021},
volume={},
number={},
pages={202-209},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Markovic Veljko,Jakovljevic Zivana B,Budak Igor M},
year={2022},
title={Automatic recognition of cylinders and planes from unstructured point clouds},
journal={VISUAL COMPUTER},
volume={38},
number={12},
pages={4329-4352},
document_type={Article},
} 

@ARTICLE{
author={Ilic-Micunovic Milana,Novakovic Milica,Budak Igor M,Vukelic Djordje B,Agarski Boris},
year={2021},
title={Analysis of Product's Design Health Impact Using Daly Method},
journal={MAKING HEALTHY CITIES FOR PEOPLE (HURBE2021): EDUCATION, RESEARCH, PRACTICE IN PLANNING, ARCHITECTURE AND ENGINEERING},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vasiljevic Ivana ST,Obradovic Ratko,Djuric Isidora B,Popkonstantinovic Branislav D,Budak Igor M,Kulic Luka,Milojevic Zoran},
year={2021},
title={Copyright Protection of 3D Digitized Artistic Sculptures by Adding Unique Local Inconspicuous Errors by Sculptors},
journal={APPLIED SCIENCES-BASEL},
volume={11},
number={16},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Todorovic Petar M,Simunovic Katica,Miljojkovic Jasmina M,Simunovic Goran,Budak Igor M,Tadic Branko U},
year={2021},
title={A Novel Method for Determination of Kinetic Friction Coefficient using Inclined Plane},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={28},
number={2},
pages={447-455},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Kanovic Zeljko S,Sokac Mario Z,Santosi Zeljko Dj,Budak Igor M,Tadic Branko U},
year={2021},
title={Modelling of Micro-Turning Process Based on Constant Cutting Force},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={20},
number={1},
pages={146-157},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Simunovic Katica,Simunovic Goran,Saric Tomislav,Kanovic Zeljko S,Budak Igor M,Agarski Boris},
year={2020},
title={Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={266},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Sokac Mario Z,Santosi Zeljko Dj,Vukelic Djordje B,Budak Igor M},
year={2020},
title={Multi-Criteria Evaluation of Design Complexity for Patient-Specific Bone Graft},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={3},
pages={803-811},
document_type={Article},
} 

@ARTICLE{
author={Vlatkovic-Jakovljevic Ivana,Todorovic Aleksandar J,Budak Igor M,Sokac Mario Z,Milicic Biljana R,Spadijer-Gostovic Aleksandra},
year={2020},
title={Measurement of dental crown wear-In vitro study},
journal={DENTAL MATERIALS JOURNAL},
volume={39},
number={1},
pages={126-134},
document_type={Article},
} 

@ARTICLE{
author={Sokac Mario Z,Budak Igor M,Puskar Tatjana M,Mirkovic Sinisa M,Santosi Zeljko Dj,Kuzmanovic Milos,Vukelic Djordje B},
year={2020},
title={Investigation of radiation level and assessment of dimensional accuracy of acquired CBCT images},
journal={MEASUREMENT},
volume={155},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokac Mario Z,Budak Igor M,Katic Marko,Jakovljevic Zivana B,Santosi Zeljko Dj,Vukelic Djordje B},
year={2020},
title={Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography},
journal={MEASUREMENT},
volume={153},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Santosi Zeljko Dj,Budak Igor M,Sokac Mario Z,Hadzistevic Miodrag J,Vukelic Djordje B},
year={2019},
title={Influence of high dynamic range images on the accuracy of the photogrammetric 3D digitization: A case study},
journal={ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT},
volume={14},
number={3},
pages={391-399},
document_type={Article},
} 

@ARTICLE{
author={Santosi Zeljko Dj,Budak Igor M,Stojakovic Vesna Z,Sokac Mario Z,Vukelic Djordje B},
year={2019},
title={Evaluation of synthetically generated patterns for image-based 3D reconstruction of texture-less objects},
journal={MEASUREMENT},
volume={147},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sokac Mario Z,Vukelic Djordje B,Jakovljevic Zivana B,Santosi Zeljko Dj,Hadzistevic Miodrag J,Budak Igor M},
year={2019},
title={Fuzzy Hybrid Method for the Reconstruction of 3D Models Based on CT/MRI Data},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={65},
number={9},
pages={482-494},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Kiralj Aleksandar I,Sokac Mario Z,Santosi Zeljko Dj,Eggbeer Dominic,Peel Sean},
year={2019},
title={Computer-aided methods for single-stage fibrous dysplasia excision and reconstruction in the zygomatico-orbital complex},
journal={RAPID PROTOTYPING JOURNAL},
volume={25},
number={4},
pages={728-737},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Vukelic Djordje B,Ilic-Micunovic Milana,Budak Igor M},
year={2019},
title={Evaluation of the environmental impact of plastic cap production, packaging, and disposal},
journal={JOURNAL OF ENVIRONMENTAL MANAGEMENT},
volume={245},
number={},
pages={55-65},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Santosi Zeljko Dj,Stojakovic Vesna Z,Korolija-Crkvenjakov Daniela D,Obradovic Ratko,Milosevic Mijodrag P,Sokac Mario Z},
year={2019},
title={Development of Expert System for the Selection of 3D Digitization Method in Tangible Cultural Heritage},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={3},
pages={837-844},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Agarski Boris,Budak Igor M,Simunovic Goran,Buchmeister Borut,Jakovljevic Zivana B,Tadic Branko U},
year={2019},
title={Eco-Design of Fixtures Based on Life Cycle and Cost Assessment},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={18},
number={1},
pages={72-85},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Hadzistevic Miodrag J,Budak Igor M,Moraca Slobodan D,Vukelic Djordje B},
year={2019},
title={Comparison of approaches to weighting of multiple criteria for selecting equipment to optimize performance and safety},
journal={INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS},
volume={25},
number={2},
pages={228-240},
document_type={Article},
} 

@ARTICLE{
author={Stepanov Jasna M,Ubavin Dejan M,Prokic Dunja,Budak Igor M,Stevanovic-Carapina Hristina,Stanisavljevic Nemanja},
year={2018},
title={Comparison of Municipal Waste Management Systems Using LCA. South Backa Waste Management Region. a Case Study},
journal={ENVIRONMENT PROTECTION ENGINEERING},
volume={44},
number={3},
pages={33-49},
document_type={Article},
} 

@ARTICLE{
author={Malotova Sarka,Cep Robert,Zlamal Tomas,Mohyla Petr,Czan Andrej,Antic Aco,Budak Igor M,Mircea Lobontiu},
year={2018},
title={Evaluation of Residual Stresses after Irregular Interrupted Machining},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={4},
pages={1009-1013},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Boskovic Nikola N,Agarski Boris,Radonic Jelena R,Budak Igor M,Pap Sabolc,Turk-Sekulic Maja M},
year={2018},
title={Eco-design of a low-cost adsorbent produced from waste cherry kernels},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={174},
number={},
pages={1620-1628},
document_type={Article},
} 

@ARTICLE{
author={Ubavin Dejan M,Agarski Boris,Maodus Nikola B,Stanisavljevic Nemanja,Budak Igor M},
year={2018},
title={A model for prioritizing landfills for remediation and closure: A case study in Serbia},
journal={INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT},
volume={14},
number={1},
pages={105-119},
document_type={Article},
} 

@ARTICLE{
author={Stojakovic Vesna Z,Budak Igor M,Obradovic Ratko,Korolija-Crkvenjakov Daniela D,Santosi Zeljko Dj},
year={2017},
title={Parametric modeling applied to the virtual reconstruction of the damaged sculpture of St John Nepomuk in Petrovaradin},
journal={ECAADE 2017: SHARING OF COMPUTABLE KNOWLEDGE! (SHOCK!), VOL 2},
volume={},
number={},
pages={389-398},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Santosi Zeljko Dj,Sokac Mario Z,Puskar Tatjana M,Budak Igor M},
year={2017},
title={Comparative Analysis of Full Frame and APS-C Camera Sensors on 3D Digitization Results},
journal={2017 IEEE EAST-WEST DESIGN & TEST SYMPOSIUM (EWDTS)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milanovic Branislav,Agarski Boris,Vukelic Djordje B,Budak Igor M,Kiss Ferenc E},
year={2017},
title={Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={167},
number={},
pages={610-618},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Nikolic Vesna DR,Kamberovic Zeljko J,Andjic Zoran M,Kosec Borut,Budak Igor M},
year={2017},
title={Comparative life cycle assessment of Ni-based catalyst synthesis processes},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={162},
number={},
pages={7-15},
document_type={Article},
} 

@ARTICLE{
author={Trifkovic Branka V,Budak Igor M,Vukelic Djordje B,Puskar Tatjana M,Jevremovic Danimir P,Todorovic Aleksandar J,Todorovic Ana R,Postic Srdjan D},
year={2017},
title={Analysis of accuracy and precision of optical 3D digitisation devices in dental computer-aided-design and computer-aided-manufacturing systems},
journal={MAEJO INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY},
volume={11},
number={1},
pages={45-57},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Budak Igor M,Tadic Branko U,Simunovic Goran,Kljajic Vladimir L,Agarski Boris},
year={2017},
title={Multi-criteria decision-making and life cycle assessment model for optimal product selection: case study of knee support},
journal={INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY},
volume={14},
number={2},
pages={353-364},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Mirkovic Sinisa M,Sokac Mario Z,Santosi Zeljko Dj,Puskar Tatjana M,Vukelic Djordje B},
year={2016},
title={An Approach to Modelling of Personalized Bone Grafts Based on Advanced Technologies},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={15},
number={4},
pages={637-648},
document_type={Article},
} 

@ARTICLE{
author={Maodus Nikola B,Agarski Boris,Kocetov-Misulic Tatjana,Budak Igor M,Radeka Miroslava M},
year={2016},
title={Life cycle and energy performance assessment of three wall types in south-eastern Europe region},
journal={ENERGY AND BUILDINGS},
volume={133},
number={},
pages={605-614},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Vesna DR,Agarski Boris,Kamberovic Zeljko J,Andjic Zoran M,Budak Igor M,Kosec Borut},
year={2016},
title={Multi-Criteria Analysis of Synthesis Methods for Ni-Based Catalysts},
journal={MATERIALI IN TEHNOLOGIJE},
volume={50},
number={4},
pages={553-558},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Budak Igor M,Vukelic Djordje B,Hodolic Janko},
year={2016},
title={Fuzzy multi-criteria-based impact category weighting in life cycle assessment},
journal={JOURNAL OF CLEANER PRODUCTION},
volume={112},
number={},
pages={3256-3266},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Randjelovic Sasa,Todorovic Petar M,Zivkovic Jelena,Kocovic Vladimir,Budak Igor M,Vukelic Djordje B},
year={2016},
title={Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings},
journal={PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY},
volume={43},
number={},
pages={335-344},
document_type={Article},
} 

@ARTICLE{
author={Mirkovic Sinisa M,Budak Igor M,Puskar Tatjana M,Tadic Ana J,Sokac Mario Z,Santosi Zeljko Dj,Djurdjevic-Mirkovic Tatjana},
year={2015},
title={Application of modern computer-aided technologies in the production of individual bone graft: A case report},
journal={VOJNOSANITETSKI PREGLED},
volume={72},
number={12},
pages={1126-1131},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Todorovic Petar M,Novkinic B,Buchmeister Borut,Radenkovic Milan M,Budak Igor M,Vukelic Djordje B},
year={2015},
title={Fixture Layout Design Based on a Single-Surface Clamping with Local Deformation},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={14},
number={3},
pages={379-391},
document_type={Article},
} 

@ARTICLE{
author={Santosi Zeljko Dj,Sokac Mario Z,Korolija-Crkvenjakov Daniela D,Kosec Borut,Sokovic M,Budak Igor M},
year={2015},
title={Reconstruction of 3D Models of Cast Sculptures Using Close-Range Photogrammetry},
journal={METALURGIJA},
volume={54},
number={4},
pages={695-698},
document_type={Article},
} 

@ARTICLE{
author={Ilic Milana,Budak Igor M,Vucinic-Vasic Milica T,Nagode Ales,Kozmidis-Luburic Uranija,Hodolic Janko,Puskar Tatjana M},
year={2015},
title={Size and shape particle analysis by applying image analysis and laser diffraction - Inhalable dust in a dental laboratory},
journal={MEASUREMENT},
volume={66},
number={},
pages={109-117},
document_type={Article},
} 

@ARTICLE{
author={Puskar Tatjana M,Lapcevic Ana R,Arandjelovic Sandra S,Radulovic Sinisa S,Budak Igor M,Vukelic Djordje B,Jevremovic Danimir P},
year={2015},
title={COMPARATIVE STUDY OF CYTOTOXICITY OF DIRECT METAL LASER SINTERED AND CAST Co-Cr-Mo DENTAL ALLOY},
journal={METALURGIJA},
volume={54},
number={3},
pages={481-484},
document_type={Article},
} 

@ARTICLE{
author={Puskar Tatjana M,Jevremovic Danimir P,Williams Robert J,Eggbeer Dominic,Vukelic Djordje B,Budak Igor M},
year={2014},
title={A Comparative Analysis of the Corrosive Effect of Artificial Saliva of Variable pH on DMLS and Cast Co-Cr-Mo Dental Alloy},
journal={MATERIALS},
volume={7},
number={9},
pages={6486-6501},
document_type={Article},
} 

@ARTICLE{
author={Vjestica Suncica S,Budak Igor M,Kljajin Milan,Vukelic Djordje B,Milanovic Branislav,Milankovic Darko,Hodolic Janko},
year={2014},
title={Model for Analysis of Environmental Impacts of Production Processes in Flooring Industry Based on LCA},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={3},
pages={457-466},
document_type={Article},
} 

@ARTICLE{
author={Todorovic Petar M,Vukelic Djordje B,Tadic Branko U,Veljkovic Dejan Z,Budak Igor M,Macuzic Ivan D,Lalic Bojan P},
year={2014},
title={Modelling of Dynamic Compliance of Fixture/Workpiece Interface},
journal={INTERNATIONAL JOURNAL OF SIMULATION MODELLING},
volume={13},
number={1},
pages={54-65},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Vukelic Djordje B,Miljanic Dragomir,Bogdanovic Bojan,Macuzic Ivan D,Budak Igor M,Todorovic Petar M},
year={2014},
title={Model testing of fixture-workpiece interface compliance in dynamic conditions},
journal={JOURNAL OF MANUFACTURING SYSTEMS},
volume={33},
number={1},
pages={76-83},
document_type={Article},
} 

@ARTICLE{
author={Trifkovic Branka V,Budak Igor M,Todorovic Aleksandar J,Vukelic Djordje B,Lazic Vojkan M,Puskar Tatjana M},
year={2014},
title={Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems},
journal={MEASUREMENT},
volume={47},
number={},
pages={45-53},
document_type={Article},
} 

@ARTICLE{
author={Ilic Milana,Budak Igor M,Kosec Borut,Nagode Ales,Hodolic Janko},
year={2014},
title={THE ANALYSIS OF PARTICLES EMISSION DURING THE PROCESS OF GRINDING OF STEEL EN 90MnV8},
journal={METALURGIJA},
volume={53},
number={2},
pages={189-192},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Bogdanovic Bojan,Jeremic Branislav M,Todorovic Petar M,Luzanin Ognjan,Budak Igor M,Vukelic Djordje B},
year={2013},
title={Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions},
journal={ASSEMBLY AUTOMATION},
volume={33},
number={4},
pages={386-400},
document_type={Article},
} 

@ARTICLE{
author={Vukelic Djordje B,Miljanic Dragomir,Randjelovic Sasa,Budak Igor M,Dzunic Dragan S,Eric Milan D,Pantic Marko},
year={2013},
title={A Burnishing Process Based on the Optimal Depth of Workpiece Penetration},
journal={MATERIALI IN TEHNOLOGIJE},
volume={47},
number={1},
pages={43-51},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Trifkovic Branka V,Puskar Tatjana M,Vukelic Djordje B,Vucaj-Cirilovic Viktorija A,Hodolic Janko,Todorovic Aleksandar J},
year={2013},
title={Comparative Analysis of 3D Digitization Systems in the Field of Dental Prosthetics},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={2},
pages={291-296},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Budak Igor M,Antic Aco,Nagode Ales,Kosec Borut},
year={2013},
title={FEM modeling and analysis in prevention of the waterway dredgers crane serviceability failure},
journal={ENGINEERING FAILURE ANALYSIS},
volume={28},
number={},
pages={328-339},
document_type={Review},
} 

@ARTICLE{
author={Vukelic Djordje B,Tadic Branko U,Miljanic Dragomir,Budak Igor M,Todorovic Petar M,Randjelovic Sasa,Jeremic Branislav M},
year={2012},
title={Novel Workpiece Clamping Method for Increased Machining Performance},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={19},
number={4},
pages={837-846},
document_type={Article},
} 

@ARTICLE{
author={Tadic Branko U,Jeremic Branislav M,Todorovic Petar M,Vukelic Djordje B,Proso Uros,Mandic Vesna M,Budak Igor M},
year={2012},
title={Efficient Workpiece Clamping by Indenting Cone-shaped Elements},
journal={INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING},
volume={13},
number={10},
pages={1725-1735},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Kljajin Milan,Budak Igor M,Tadic Branko U,Vukelic Djordje B,Bosak Martin,Hodolic Janko},
year={2012},
title={Application of Multi-Criteria Assessment in Evaluation of Motor Vehicles' Environmental Performances},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={19},
number={2},
pages={221-226},
document_type={Article},
} 

@ARTICLE{
author={Trifkovic Branka V,Budak Igor M,Todorovic Aleksandar J,Hodolic Janko,Puskar Tatjana M,Jevremovic Danimir P,Vukelic Djordje B},
year={2012},
title={Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns},
journal={MEASUREMENT SCIENCE REVIEW},
volume={12},
number={3},
pages={90-97},
document_type={Article},
} 

@ARTICLE{
author={Agarski Boris,Budak Igor M,Kosec Borut,Hodolic Janko},
year={2012},
title={An Approach to Multi-criteria Environmental Evaluation with Multiple Weight Assignment},
journal={ENVIRONMENTAL MODELING & ASSESSMENT},
volume={17},
number={3},
pages={255-266},
document_type={Article},
} 

@ARTICLE{
author={Jevremovic Danimir P,Puskar Tatjana M,Budak Igor M,Vukelic Djordje B,Kojic Vesna V,Eggbeer Dominic,Williams Robert J},
year={2012},
title={An Re/Rm Approach to the Design and Manufacture of Removable Partial Dentures with a Biocompatibility Analysis of the F75 Co-Cr SLM Alloy},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={2},
pages={123-129},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Vukelic Djordje B,Bracun Drago,Hodolic Janko,Sokovic Mirko},
year={2012},
title={Pre-Processing of Point-Data from Contact and Optical 3D Digitization Sensors},
journal={SENSORS},
volume={12},
number={1},
pages={1100-1126},
document_type={Article},
} 

@ARTICLE{
author={Jevremovic Danimir P,Puskar Tatjana M,Kosec Borut,Vukelic Djordje B,Budak Igor M,Aleksandrovic Srbislav M,Eggbeer Dominic,Williams Robert J},
year={2012},
title={The Analysis of the Mechanical Properties of F75 Co-Cr Alloy for Use in Selective Laser Melting (SLM) Manufacturing of Removable Partial Dentures (RPD)},
journal={METALURGIJA},
volume={51},
number={2},
pages={171-174},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Sokovic Mirko,Budak Igor M,Antic Aco,Kosec Borut},
year={2012},
title={Optimal Finite Elements Method (Fem) Model for the Jib Structure of a Waterway Dredger},
journal={METALURGIJA},
volume={51},
number={1},
pages={113-116},
document_type={Article},
} 

@ARTICLE{
author={Kosec Borut,Karpe B,Budak Igor M,Licen M,Djordjevic M,Nagode Ales,Kosec Gorazd},
year={2012},
title={Efficiency and Quality of Inductive Heating and Quenching of Planetary Shafts},
journal={METALURGIJA},
volume={51},
number={1},
pages={71-74},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Budak Igor M,Antic Aco,Kosec Borut},
year={2011},
title={Special Finite Elements: Theoretical Background and Application},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={18},
number={4},
pages={649-655},
document_type={Article},
} 

@ARTICLE{
author={Sadilek Marek,Cep Robert,Budak Igor M,Sokovic Mirko},
year={2011},
title={Aspects of Using Tool Axis Inclination Angle},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={57},
number={9},
pages={681-688},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Sokovic Mirko,Barisic Branimir},
year={2011},
title={Accuracy improvement of point data reduction with sampling-based methods by Fuzzy logic-based decision-making},
journal={MEASUREMENT},
volume={44},
number={6},
pages={1188-1200},
document_type={Article},
} 

@ARTICLE{
author={Kosec Gorazd,Nagode Ales,Budak Igor M,Antic Aco,Kosec Borut},
year={2011},
title={Failure of the pinion from the drive of a cement mill},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={1},
pages={450-454},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Sokovic Mirko,Kopac Janez,Hodolic Janko},
year={2009},
title={Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={12},
pages={755-765},
document_type={Article},
} 

@ARTICLE{
author={Budak Igor M,Hodolic Janko,Sokovic Mirko},
year={2005},
title={Development of a programme system for data-point pre-processing in Reverse Engineering},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={162},
number={},
pages={730-735},
document_type={Article},
}