@ARTICLE{
author={Bosnjak Srdjan M,Momcilovic Dejan B,Gnjatovic Nebojsa B,Stefanovic Aleksandar Z,Urosevic Marko M,Milenovic Ivan Lj},
year={2025},
title={Corrosion-provoked Collapse of the Inclined Belt Conveyor Bridge},
journal={FME TRANSACTIONS},
volume={53},
number={4},
pages={639-650},
document_type={Article},
} 

@ARTICLE{
author={Gnjatovic Nebojsa B,Urosevic Marko M,Stefanovic Aleksandar Z,Bosnjak Srdjan M,Zrnic Nenad Dj},
year={2024},
title={Coupled and partial impacts of the inclination angle of the discharge boom and the mass of conveyed material on the dynamic behavior of the stacker superstructure},
journal={MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Gnjatovic Nebojsa B,Bosnjak Srdjan M,Stefanovic Aleksandar Z},
year={2023},
title={Analysis of the Dynamic Response as a Basis for the Efficient Protection of Large Structure Health Using Controllable Frequency-Controlled Drives},
journal={MATHEMATICS},
volume={11},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milenovic Ivan Lj,Bosnjak Srdjan M,Gnjatovic Nebojsa B,Obradovic Aleksandar M},
year={2022},
title={Bucket wheel excavators with a kinematic breakdown system: Identification and monitoring of the basic parameters of static stability of the slewing superstructure},
journal={EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY},
volume={24},
number={2},
pages={359-370},
document_type={Article},
} 

@ARTICLE{
author={Gnjatovic Nebojsa B,Bosnjak Srdjan M,Milenovic Ivan Lj,Stefanovic Aleksandar Z},
year={2020},
title={Bucket wheel excavators: Dynamic response as a criterion for validation of the total number of buckets},
journal={ENGINEERING STRUCTURES},
volume={225},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Gnjatovic Nebojsa B,Bosnjak Srdjan M,Milenovic Ivan Lj},
year={2020},
title={The Influence of Incrustation and Chute Blockage on the Dynamic Behaviour of a Bucket Wheel Excavator Slewing Superstructure},
journal={JOURNAL OF THEORETICAL AND APPLIED MECHANICS},
volume={58},
number={3},
pages={573-584},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Zrnic Nenad Dj,Momcilovic Dejan B,Gnjatovic Nebojsa B,Milenovic Ivan Lj},
year={2020},
title={Tie-rods of the bucket wheel excavator slewing superstructure: A study of the eye plate stress state},
journal={ENGINEERING STRUCTURES},
volume={207},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Pantelic Milorad P,Bosnjak Srdjan M,Misita Mirjana Z,Gnjatovic Nebojsa B,Stefanovic Aleksandar Z},
year={2020},
title={Service FMECA of a bucket wheel excavator},
journal={ENGINEERING FAILURE ANALYSIS},
volume={108},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag,Bosnjak Srdjan M,Sedmak Simon A,Vistac Brane,Savic Zoran Z},
year={2019},
title={Repair of Cracks Detected in Cast Components of Vertical Kaplan Turbine Rotor Hub},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={19},
number={3},
pages={243-250},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Bosnjak Srdjan M,Gnjatovic Nebojsa B,Sedmak Simon A,Arsic Dusan M,Savic Zoran Z},
year={2018},
title={Determination of Residual Fatigue Life of Welded Structures at Bucket-Wheel Excavators through the Use of Fracture Mechanics},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={79-84},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Gnjatovic Nebojsa B,Bosnjak Srdjan M,Stefanovic Aleksandar Z},
year={2018},
title={The Dependency of the Dynamic Response of a Two Mast Bucket Wheel Excavator Superstructure on the Counterweight Mass and the Degree of Fourier Approximation of the Digging Resistance},
journal={ARCHIVES OF MINING SCIENCES},
volume={63},
number={2},
pages={491-509},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Gnjatovic Nebojsa B,Milenovic Ivan Lj},
year={2018},
title={From 'A Priori' to 'A Posteriori' Static Stability of the Slewing Superstructure of a Bucket Wheel Excavator},
journal={EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY},
volume={20},
number={2},
pages={190-206},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Gnjatovic Nebojsa B,Milenovic Ivan Lj,Arsic Dusan M},
year={2018},
title={Failure of the bucket wheel excavator buckets},
journal={ENGINEERING FAILURE ANALYSIS},
volume={84},
number={},
pages={247-261},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Gnjatovic Nebojsa B,Savicevic Sreten D,Pantelic Milorad P,Milenovic Ivan Lj},
year={2016},
title={Basic parameters of the static stability, loads and strength of the vital parts of a bucket wheel excavator's slewing superstructure},
journal={JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A},
volume={17},
number={5},
pages={353-365},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Savicevic Sreten,Milojevic Goran Z,Arsic Dusan M},
year={2016},
title={Fracture analysis of the pulley of a bucket wheel boom hoist system},
journal={EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY},
volume={18},
number={2},
pages={155-163},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Oguamanam DCD,Zrnic Nenad Dj},
year={2015},
title={The influence of constructive parameters on response of bucket wheel excavator superstructure in the out-of-resonance region},
journal={ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING},
volume={15},
number={4},
pages={977-985},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Savicevic Sreten D,Gnjatovic Nebojsa B,Milenovic Ivan Lj,Pantelic Milorad P},
year={2015},
title={Disaster of the bucket wheel excavator caused by extreme environmental impact: Consequences, rescue and reconstruction},
journal={ENGINEERING FAILURE ANALYSIS},
volume={56},
number={},
pages={360-374},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M},
year={2015},
title={Comments on "Determination and Analysis of the Theoretical Production of a Bucket Wheel Excavator"},
journal={ARCHIVES OF MINING SCIENCES},
volume={60},
number={1},
pages={283-301},
document_type={Article},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Gasic Vlada M,Bosnjak Srdjan M},
year={2015},
title={Dynamic responses of a gantry crane system due to a moving body considered as moving oscillator},
journal={ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING},
volume={15},
number={1},
pages={243-250},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Odanovic Zoran D,Bosnjak Srdjan M,Mladenovic Mladen,Savic Zoran Z},
year={2013},
title={State Analysis and Integrity of Welded Structures of the Upper Ring of the Turbine Runner Guide Vane Apparatus of Hydroelectric Generating Set A6 on Hydro Power Plant Djerdap 1},
journal={STRUCTURAL INTEGRITY OF WELDED STRUCTURES},
volume={814},
number={},
pages={7-18},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Momcilovic Dejan B,Petkovic Zoran D,Pantelic Milorad P,Gnjatovic Nebojsa B},
year={2013},
title={Failure investigation of the bucket wheel excavator crawler chain link},
journal={ENGINEERING FAILURE ANALYSIS},
volume={35},
number={},
pages={462-469},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Simonovic Aleksandar M,Zrnic Nenad Dj,Gnjatovic Nebojsa B},
year={2013},
title={'Designing-in' failures and redesign of bucket wheel excavator undercarriage},
journal={ENGINEERING FAILURE ANALYSIS},
volume={35},
number={},
pages={95-103},
document_type={Article},
} 

@ARTICLE{
author={Rakin Marko P,Arsic Miodrag A,Bosnjak Srdjan M,Gnjatovic Nebojsa B,Medjo Bojan I},
year={2013},
title={Integrity Assessment of Bucket Wheel Excavator Welded Structures by Using the Single Selection Method},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={5},
pages={811-816},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Gnjatovic Nebojsa B,Milenovic Ivan Lj,Jerman Boris},
year={2013},
title={Impact of the Track Wheel Axles on the Strength of the Bucket Wheel Excavator Two-Wheel Bogie},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={5},
pages={803-810},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Atanasovska Ivana D,Milojevic Goran Z,Mihajlovic Vaso M},
year={2013},
title={Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns},
journal={ENGINEERING FAILURE ANALYSIS},
volume={32},
number={},
pages={322-333},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Dunjic Momcilo M,Gnjatovic Nebojsa B,Djordjevic Milos D},
year={2012},
title={Redesign of the vital subsystems as a way of extending the bucket wheel excavators life},
journal={TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM},
volume={7},
number={4},
pages={1620-1629},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Zrnic Nenad Dj,Gasic Vlada M,Petkovic Zoran D,Simonovic Aleksandar M},
year={2012},
title={External Load Variability of Multibucket Machines for Mechanization},
journal={EQUIPMENT MANUFACTURING TECHNOLOGY},
volume={422},
number={},
pages={678-683},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Zrnic Nenad Dj,Dunjic Momcilo M,Dragovic Branislav M},
year={2012},
title={Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis},
journal={ADVANCES IN METALLURGICAL AND MINING ENGINEERING},
volume={402},
number={},
pages={660-665},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Zrnic Nenad Dj},
year={2012},
title={Dynamics, failures, redesigning and environmentally friendly technologies in surface mining systems},
journal={ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING},
volume={12},
number={3},
pages={348-359},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Bosnjak Srdjan M,Odanovic Zoran D,Dunjic Momcilo M,Simonovic Aleksandar M},
year={2012},
title={Analysis of the spreader track wheels premature damages},
journal={ENGINEERING FAILURE ANALYSIS},
volume={20},
number={},
pages={118-136},
document_type={Article},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Gasic Vlada M,Obradovic Aleksandar M,Bosnjak Srdjan M},
year={2011},
title={Appropriate Modeling of Dynamic Behavior of Quayside Container Cranes Boom Under a Moving Trolley},
journal={VIBRATION PROBLEMS ICOVP 2011},
volume={139},
number={},
pages={81-86},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Zrnic Nenad Dj,Odanovic Zoran D,Djordjevic Milos D},
year={2011},
title={Failure Analysis of the Stacker Crawler Chain Link},
journal={11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11)},
volume={10},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Bosnjak Srdjan M,Gasic Vlada M,Arsic Miodrag A,Petkovic Zoran D},
year={2011},
title={Failure Analysis of the Tower Crane Counterjib},
journal={11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11)},
volume={10},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M},
year={2011},
title={Comments on "Design of aluminium boom and arm for an excavator"},
journal={JOURNAL OF TERRAMECHANICS},
volume={48},
number={6},
pages={459-462},
document_type={Editorial Material},
} 

@ARTICLE{
author={Trifkovic Dragan R,Stupar Slobodan N,Bosnjak Srdjan M,Milovancevic Milorad Dj,Krstic Branimir B,Rajic Zoran M,Dunjic Momcilo M},
year={2011},
title={Failure analysis of the combat jet aircraft rudder shaft},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={8},
pages={1998-2007},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Bosnjak Srdjan M,Zrnic Nenad Dj,Sedmak Aleksandar S,Gnjatovic Nebojsa B},
year={2011},
title={Bucket wheel failure caused by residual stresses in welded joints},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={2},
pages={700-712},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Pantelic Milorad P,Zrnic Nenad Dj,Gnjatovic Nebojsa B,Djordjevic Milos D},
year={2011},
title={Failure analysis and reconstruction design of the slewing platform mantle of the bucket wheel excavator O&K SchRs 630},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={2},
pages={658-669},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Zrnic Nenad Dj,Rakin Marko P,Pantelic Milorad P},
year={2011},
title={Bucket wheel excavator Integrity assessment of the bucket wheel boom tie-rod welded joint},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={1},
pages={212-222},
document_type={Article},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Bosnjak Srdjan M,Hoffmann K},
year={2010},
title={Parameter sensitivity analysis of non-dimensional models of quayside container cranes},
journal={MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS},
volume={16},
number={2},
pages={145-160},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Zrnic Nenad Dj,Pantelic Milorad P,Obradovic Aleksandar M},
year={2010},
title={Failure analysis and redesign of the bucket wheel excavator two-wheel bogie},
journal={ENGINEERING FAILURE ANALYSIS},
volume={17},
number={2},
pages={473-485},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Zrnic Nenad Dj,Simic Goran Z,Simonovic Aleksandar M},
year={2009},
title={Cracks, repair and reconstruction of bucket wheel excavator slewing platform},
journal={ENGINEERING FAILURE ANALYSIS},
volume={16},
number={5},
pages={1631-1642},
document_type={Article},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Hoffmann K,Bosnjak Srdjan M},
year={2009},
title={Modelling of dynamic interaction between structure and trolley for mega container cranes},
journal={MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS},
volume={15},
number={3},
pages={295-311},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Zrnic Nenad Dj,Dragovic Branislav M},
year={2009},
title={Dynamic Response of Mobile Elevating Work Platform under Wind Excitation},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={2},
pages={104-113},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Zrnic Nenad Dj,Simonovic Aleksandar M,Momcilovic Dejan B},
year={2009},
title={Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support},
journal={ENGINEERING FAILURE ANALYSIS},
volume={16},
number={3},
pages={740-750},
document_type={Article},
} 

@ARTICLE{
author={Putic Slavisa S,Rakin Marko P,Bosnjak Srdjan M},
year={2008},
title={Application of the residual strength degradation model to carbon-epoxy composite},
journal={MATERIALS SCIENCE},
volume={44},
number={3},
pages={446-450},
document_type={Article},
} 

@ARTICLE{
author={Zrnic Nenad Dj,Bosnjak Srdjan M},
year={2008},
title={Comments on "Modeling of system dynamics of a slewing flexible beam with moving payload pendulum"},
journal={MECHANICS RESEARCH COMMUNICATIONS},
volume={35},
number={8},
pages={622-624},
document_type={Article},
} 

@ARTICLE{
author={Putic Slavisa S,Stamenovic Marina R,Bajceta Branislav,Stajcic Predrag,Bosnjak Srdjan M},
year={2007},
title={The influence of high and low temperatures on the impact properties of glass-epoxy composites},
journal={JOURNAL OF THE SERBIAN CHEMICAL SOCIETY},
volume={72},
number={7},
pages={713-722},
document_type={Article},
}