@ARTICLE{
author={Vencl Aleksandar A,Sljivic Veljko M,Pokusova Marcela,Kandeva Mara,Sun HongGuang,Zadorozhnaya Elena,Bobic Ilija Dj},
year={2021},
title={Production, Microstructure and Tribological Properties of Zn-Al/Ti Metal-Metal Composites Reinforced with Alumina Nanoparticles},
journal={INTERNATIONAL JOURNAL OF METALCASTING},
volume={15},
number={4},
pages={1402-1411},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Stankovic Milos B,Hvizdos Pavol,Bobic Biljana M,Stojanovic Blaza Z,Franek Friedrich},
year={2020},
title={Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={42},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Bobic Biljana M,Jakimovska Kristina,Svoboda Petr,Kandeva Mara},
year={2019},
title={Erosive wear properties of ZA-27 alloy-based nanocomposites: Influence of type, amount, and size of nanoparticle reinforcements},
journal={FRICTION},
volume={7},
number={4},
pages={340-350},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Vencl Aleksandar A,Ruzic Jovana Dj,Bobic Ilija Dj,Damnjanovic Zvonko R},
year={2019},
title={Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting},
journal={JOURNAL OF COMPOSITE MATERIALS},
volume={53},
number={15},
pages={2033-2046},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Vucetic Filip,Bobic Biljana M,Pitel Jan,Bobic Ilija Dj},
year={2019},
title={Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={100},
number={9-12},
pages={2135-2146},
document_type={Article},
} 

@ARTICLE{
author={Velickovic Sandra N,Stojanovic Blaza Z,Babic Miroslav J,Vencl Aleksandar A,Bobic Ilija Dj,Bognar Gabriella Vadaszne,Vucetic Filip},
year={2019},
title={Parametric optimization of the aluminium nanocomposites wear rate},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={41},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Biljana M,Vucetic Filip,Svoboda Petr,Popovic Vladimir M,Bobic Ilija Dj},
year={2018},
title={Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={40},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stojanovic Blaza Z,Vencl Aleksandar A,Bobic Ilija Dj,Miladinovic Slavica D,Skerlic Jasmina},
year={2018},
title={Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi's method and artificial neural network},
journal={JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
volume={40},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Velickovic Sandra N,Stojanovic Blaza Z,Babic Miroslav J,Bobic Ilija Dj},
year={2017},
title={Optimization of tribological properties of aluminum hybrid composites using Taguchi design},
journal={JOURNAL OF COMPOSITE MATERIALS},
volume={51},
number={17},
pages={2505-2515},
document_type={Article},
} 

@ARTICLE{
author={Maksimovic Vesna M,Devecerski Aleksandar B,Dosen Anja M,Bobic Ilija Dj,Eric Milic D,Volkov-Husovic Tatjana D},
year={2017},
title={Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite},
journal={TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS},
volume={70},
number={1},
pages={97-105},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Bajat Jelena B,Bobic Ilija Dj,Jegdic Bore V},
year={2016},
title={Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution},
journal={TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA},
volume={26},
number={6},
pages={1512-1521},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Vucetic Filip,Bobic Biljana M,Ruzic Jovana Dj},
year={2014},
title={Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition},
journal={MATERIALS & DESIGN},
volume={64},
number={},
pages={381-392},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Ruzic Jovana Dj,Bobic Biljana M,Babic Miroslav J,Vencl Aleksandar A,Mitrovic Slobodan R},
year={2014},
title={Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={612},
number={},
pages={7-15},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Stojanovic Blaza Z},
year={2014},
title={Tribological properties of A356 Al-Si alloy composites under dry sliding conditions},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={66},
number={1},
pages={66-74},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Babic Miroslav J,Vencl Aleksandar A,Bobic Biljana M,Mitrovic Slobodan R},
year={2013},
title={Artificial aging of thixocast ZA27 alloy and particulate ZA27/SiCp composites},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={104},
number={10},
pages={954-965},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Bajat Jelena B,Acimovic-Pavlovic Zagorka S,Bobic Ilija Dj,Jegdic Bore V},
year={2013},
title={Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution},
journal={TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA},
volume={23},
number={4},
pages={931-941},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Slobodan R,Babic Miroslav J,Zivic Fatima T,Bobic Ilija Dj,Eric Milan D,Dzunic Dragan S,Pantic Marko},
year={2012},
title={Influence of Al2o3 Particle Content on the Sliding Wear Behaviour of Za-27 Alloy Composites},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={4},
pages={548-558},
document_type={Article},
} 

@ARTICLE{
author={Acimovic-Pavlovic Zagorka S,Raic Karlo T,Bobic Ilija Dj,Bobic Biljana M},
year={2011},
title={Synthesis of ZrO2 Particles Reinforced ZA25 Alloy Composites by Compocasting Process},
journal={ADVANCED COMPOSITE MATERIALS},
volume={20},
number={4},
pages={375-384},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Bajat Jelena B,Acimovic-Pavlovic Zagorka S,Rakin Marko P,Bobic Ilija Dj},
year={2011},
title={The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy},
journal={CORROSION SCIENCE},
volume={53},
number={1},
pages={409-417},
document_type={Article},
} 

@ARTICLE{
author={Bobic Biljana M,Babic Miroslav J,Mitrovic Slobodan R,Ilic Nenad M,Bobic Ilija Dj,Jovanovic Milan T},
year={2010},
title={Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures},
journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
volume={101},
number={12},
pages={1524-1531},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Arostegui Saioa,Bobic Biljana M,Marinkovic Aleksandar B,Babic Miroslav J},
year={2010},
title={Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles},
journal={JOURNAL OF ALLOYS AND COMPOUNDS},
volume={506},
number={2},
pages={631-639},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Zivic Fatima T,Bobic Ilija Dj},
year={2010},
title={Wear Behavior of Composites Based on ZA-27 Alloy Reinforced by Al2O3 Particles Under Dry Sliding Condition},
journal={TRIBOLOGY LETTERS},
volume={38},
number={3},
pages={337-346},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Mitrovic Slobodan R,Dzunic Dragan S,Jeremic Branislav M,Bobic Ilija Dj},
year={2010},
title={Tribological Behavior of Composites Based on ZA-27 Alloy Reinforced with Graphite Particles},
journal={TRIBOLOGY LETTERS},
volume={37},
number={2},
pages={401-410},
document_type={Article},
} 

@ARTICLE{
author={Babic Miroslav J,Vencl Aleksandar A,Mitrovic Slobodan R,Bobic Ilija Dj},
year={2009},
title={Influence of T4 Heat Treatment on Tribological Behavior of Za27 Alloy Under Lubricated Sliding Condition},
journal={TRIBOLOGY LETTERS},
volume={36},
number={2},
pages={125-134},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Jovanovic Milan T,Babic Miroslav J,Mitrovic Slobodan R},
year={2008},
title={Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al2O3 Particles},
journal={TRIBOLOGY LETTERS},
volume={32},
number={3},
pages={159-170},
document_type={Article},
} 

@ARTICLE{
author={Vencl Aleksandar A,Bobic Ilija Dj,Miskovic Zoran S},
year={2008},
title={Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al-Si alloy},
journal={WEAR},
volume={264},
number={7-8},
pages={616-623},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Bobic Ilija Dj,Djuric B,Grahovac Nebojsa N,Ilic Nenad M},
year={2007},
title={Microstructural and sliding wear behaviour of a heat-treated zinc-based alloy},
journal={TRIBOLOGY LETTERS},
volume={25},
number={3},
pages={173-184},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Tadic Srdjan,Zec Slavica P,Miskovic Zoran S,Bobic Ilija Dj},
year={2006},
title={The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy},
journal={MATERIALS & DESIGN},
volume={27},
number={3},
pages={192-199},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic Milan T,Dimcic Biljana,Bobic Ilija Dj,Zec Slavica P,Maksimovic Vesna M},
year={2005},
title={Microstructure and mechanical properties of precision cast TiAl turbocharger wheel},
journal={JOURNAL OF MATERIALS PROCESSING TECHNOLOGY},
volume={167},
number={1},
pages={14-21},
document_type={Article},
} 

@ARTICLE{
author={Miskovic Zoran S,Dimcic Biljana,Bobic Ilija Dj,Zec Slavica P,Jovanovic Milan T},
year={2005},
title={Appearance of a hard layer (alpha-case) on the surface of Ti-6Al-4V surgical implant castings},
journal={CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES},
volume={494},
number={},
pages={561-566},
document_type={Article},
} 

@ARTICLE{
author={Dimcic Biljana,Jovanovic Milan T,Bobic Ilija Dj,Zec Slavica P,Tadic Srdjan},
year={2004},
title={TiAl - a new high temperature material for turbocharger rotors},
journal={PROGRESS IN ADVANCED MATERIALS AND PROCESSES},
volume={453-454},
number={},
pages={169-174},
document_type={Article},
} 

@ARTICLE{
author={Bobic Ilija Dj,Jovanovic Milan T,Ilic Nenad M},
year={2003},
title={Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles},
journal={MATERIALS LETTERS},
volume={57},
number={11},
pages={1683-1688},
document_type={Article},
} 

@ARTICLE{
author={Cancarevic Marija N,Bobic Ilija Dj,Jovanovic Milan T},
year={2000},
title={Microstructure and mechanical properties of ZA27 alloy matrix composites},
journal={TRENDS IN ADVANCED MATERIALS AND PROCESSES},
volume={352},
number={},
pages={219-224},
document_type={Article},
}