@ARTICLE{
author={Stanic Luka,Bebic Milan Z,Ristic Leposava B,Rivera Marco},
year={2025},
title={Dual Direct Matrix Converter-Based Drives With Enhanced Input Power Factor Control and Common-Mode Voltage Elimination},
journal={IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Ceranic Balsa,Bebic Milan Z,Rasic Nesa T},
year={2025},
title={Industrial Application of Open-Loop Anti-Sway Control for Bridge Crane Horizontal Motion Drive},
journal={2025 12TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING, ICETRAN},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Brajovic Dragan V,Jokanovic Bojan M,Bebic Milan Z,Kartalovic Nenad M,Nikezic Dusan P},
year={2023},
title={Lifetime extension of the high voltage asynchronous machine in relation to the voltage endurance test},
journal={ELECTRICAL ENGINEERING},
volume={105},
number={3},
pages={1643-1653},
document_type={Article},
} 

@ARTICLE{
author={Stanic Luka,Ristic Leposava B,Bebic Milan Z,Rivera Marco},
year={2023},
title={Improvement of two grid power factor control methods for matrix converter open-end-winding drive with common-mode voltage elimination supplied by unbalanced grid},
journal={IET POWER ELECTRONICS},
volume={16},
number={4},
pages={596-611},
document_type={Article},
} 

@ARTICLE{
author={Bebic Milan Z,Rasic Nesa T,Vojvodic Nikola,Jeftenic Borislav I},
year={2021},
title={Revitalization and Modernization of Dragline Excavators with Limited Budget},
journal={2021 21ST INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE 2021)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Vojvodic Nikola,Bebic Milan Z},
year={2021},
title={Analysis of the influence of non-simultaneous sampling on the measurement of three-phase instantaneous power},
journal={2021 21ST INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE 2021)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Stanic Luka,Ristic Leposava B,Bebic Milan Z,Rivera Marco},
year={2021},
title={Extended SVM for direct matrix converter based drive operating under unbalanced grid conditions},
journal={2021 21ST INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE 2021)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rosic Marko M,Antic Sanja,Bebic Milan Z},
year={2021},
title={Improvements of torque ripple reduction in DTC IM drive with arbitrary number of voltage intensities and automatic algorithm modification},
journal={TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES},
volume={29},
number={2},
pages={687-703},
document_type={Article},
} 

@ARTICLE{
author={Kartalovic Nenad M,Jokanovic Bojan M,Bebic Milan Z,Lazarevic Djordje R},
year={2019},
title={Degradation of Stator Insulation of High-Voltage Asynchronous Machines in Gamma and Neutron Radiation Field},
journal={NUCLEAR TECHNOLOGY & RADIATION PROTECTION},
volume={34},
number={3},
pages={264-271},
document_type={Article},
} 

@ARTICLE{
author={Pantelic Milorad P,Jovancic Predrag D,Ristic Leposava B,Bebic Milan Z},
year={2019},
title={Concrete base influence on the increased vibrations level of the mill drive system elements - A case study},
journal={ENGINEERING FAILURE ANALYSIS},
volume={106},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kartalovic Nenad M,Jokanovic Bojan M,Bebic Milan Z,Lazarevic Djordje R},
year={2019},
title={The effect of gamma radiation on the stator insulation of rotating electrical machines},
journal={RADIATION EFFECTS AND DEFECTS IN SOLIDS},
volume={174},
number={9-10},
pages={777-789},
document_type={Article},
} 

@ARTICLE{
author={Statkic Sasa Z,Jeftenic Ilija B,Bebic Milan Z,Milkic Zarko,Jovic Srdjan},
year={2019},
title={Reliability assessment of the single motor drive of the belt conveyor on Drmno open-pit mine},
journal={INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS},
volume={113},
number={},
pages={393-402},
document_type={Article},
} 

@ARTICLE{
author={Jokanovic Bojan M,Bebic Milan Z,Kartalovic Nenad M},
year={2019},
title={The influence of combined strain and constructive solutions for stator insulation of rotating electrical machines on duration of their reliable exploitation},
journal={INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS},
volume={110},
number={},
pages={36-47},
document_type={Article},
} 

@ARTICLE{
author={Ristic Leposava B,Brkovic Bogdan M,Majstorovic Milovan,Milovic Uros,Taluo Taufik,Bebic Milan Z},
year={2018},
title={Electrical Drives with Active Rectifiers Connected to Distorted Utility Grid},
journal={2018 5TH INTERNATIONAL SYMPOSIUM ON ENVIRONMENT-FRIENDLY ENERGIES AND APPLICATIONS (EFEA)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Antic Radoslav M,Naumovic-Vukovic Dragana,Bebic Milan Z,Ristic Leposava B},
year={2018},
title={Application of the Microprocessor-Based MV Protective Equipment for Energy Management Purposes},
journal={2018 5TH INTERNATIONAL SYMPOSIUM ON ENVIRONMENT-FRIENDLY ENERGIES AND APPLICATIONS (EFEA)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Bebic Milan Z,Ristic Leposava B},
year={2018},
title={Speed Controlled Belt Conveyors: Drives and Mechanical Considerations},
journal={ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING},
volume={18},
number={1},
pages={51-60},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Aleksandar B,Rivera Marco,Bebic Milan Z,Milosavljevic Srdjan B},
year={2017},
title={Predictive Control of a Current Source Rectifier in Wind Energy Conversion System with PMSG},
journal={2017 IEEE SOUTHERN POWER ELECTRONICS CONFERENCE (SPEC)},
volume={},
number={},
pages={770-775},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tosic Nikola,Bukvic Aleksandar,Dimitrijevic Vladan,Bebic Milan Z,Ristic Leposava B},
year={2016},
title={Hardware in the Loop Model for Irregular Conditions in Tension Leveler Applications},
journal={PROCEEDINGS OF THE 2016 4TH INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL FRIENDLY ENERGIES AND APPLICATIONS (EFEA)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rosic Marko M,Bjekic Miroslav M,Bebic Milan Z,Jeftenic Borislav I},
year={2016},
title={Electromotive Force Compensation in Direct Torque Control with Discretized Voltage Intensities},
journal={PROCEEDINGS OF THE 2016 4TH INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL FRIENDLY ENERGIES AND APPLICATIONS (EFEA)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rasic Nesa T,Bebic Milan Z,Ristic Leposava B,Mihailovic Ilija D,Jevtic Dragan S,Statkic Sasa Z,Jeftenic Borislav I},
year={2016},
title={Improved Efficiency of Bucket Wheel Excavator Operation with Advances in the Control Algorithm},
journal={PROCEEDINGS OF THE 2016 4TH INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL FRIENDLY ENERGIES AND APPLICATIONS (EFEA)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rosic Marko M,Bebic Milan Z},
year={2015},
title={Analysis of Torque Ripple Reduction in Induction Motor DTC Drive with Multiple Voltage Vectors},
journal={ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING},
volume={15},
number={1},
pages={105-114},
document_type={Article},
} 

@ARTICLE{
author={Ristic Leposava B,Mihailovic Ilija D,Jeftenic Ilija B,Nikolic Aleksandar B,Bebic Milan Z},
year={2014},
title={Energy Efficiency in Paper Industry - Study of Two Cases},
journal={3RD INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL FRIENDLY ENERGIES AND APPLICATIONS (EFEA 2014)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Rasic Nesa T,Bebic Milan Z,Ristic Leposava B,Jeftenic Borislav I,Statkic Sasa Z},
year={2013},
title={Control of the Main Working Axes of Bucket Wheel Excavators According to the Criterion of Desired Capacity},
journal={39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013)},
volume={},
number={},
pages={3433-3438},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ristic Leposava B,Bebic Milan Z,Jevtic Dragan S,Mihailovic Ilija D,Statkic Sasa Z,Rasic Nesa T,Jeftenic Borislav I},
year={2012},
title={Fuzzy speed control of belt conveyor system to improve energy efficiency},
journal={2012 15TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE/PEMC)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jeftenic Borislav I,Mihailovic Ilija D,Bebic Milan Z,Ristic Leposava B,Jevtic Dragan S,Rasic Nesa T,Statkic Sasa Z},
year={2010},
title={Energy efficiency in transportation of bulk material with frequency controlled drives},
journal={PROCEEDINGS OF 14TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE-PEMC 2010)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jeftenic Borislav I,Bebic Milan Z},
year={2010},
title={Realization of Rewinder With a Reduced Number of Sensors},
journal={IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS},
volume={57},
number={8},
pages={2797-2806},
document_type={Article},
} 

@ARTICLE{
author={Jeftenic Borislav I,Ristic Leposava B,Bebic Milan Z,Statkic Sasa Z},
year={2009},
title={Controlled Induction Motor Drives Supplied by Frequency Converters on Belt Conveyors - Modeling and Commissioning},
journal={IECON: 2009 35TH ANNUAL CONFERENCE OF IEEE INDUSTRIAL ELECTRONICS, VOLS 1-6},
volume={},
number={},
pages={986-991},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jeftenic Borislav I,Ristic Leposava B,Bebic Milan Z,Rasic Nesa T},
year={2009},
title={New solution of tangent rewinder drive in the board factory},
journal={ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4},
volume={},
number={},
pages={2065-2070},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jeftenic Borislav I,Bebic Milan Z,Gvozdenovic Milorad,Rasic Nesa T,Ristic Leposava B,Jevtic Dragan S,Lucic Panta,Slavkovic D},
year={2008},
title={Load Equalization for High-Power Induction Motors by Speed Control in Limited Range},
journal={2008 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION, VOLS 1-3},
volume={},
number={},
pages={842-847},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Statkic Sasa Z,Rasic Nesa T,Jeftenic Borislav I,Bebic Milan Z},
year={2007},
title={Controlled multi-motor crawler travel drives on open pit mining machines},
journal={INTERNATIONAL AEGEAN CONFERENCE ON ELECTRICAL MACHINES AND POWER ELECTRONICS & ELECTROMOTION, PROCEEDINGS},
volume={},
number={},
pages={812-817},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Jeftenic Borislav I,Bebic Milan Z,Statkic Sasa Z},
year={2006},
title={Controlled multi-motor drives},
journal={2006 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Vols 1-3},
volume={},
number={},
pages={1392-1398},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Krgovic Milorad V,Jeftenic Borislav I,Bebic Milan Z,Jovanovic M,Belincevic Mario},
year={2004},
title={Electric motor drive of paper machine with asynchronous motors},
journal={CELLULOSE CHEMISTRY AND TECHNOLOGY},
volume={38},
number={5-6},
pages={345-351},
document_type={Article},
} 

@ARTICLE{
author={Jeftenic Borislav I,Krgovic Milorad V,Bebic Milan Z},
year={2002},
title={The selection of sectional drives for the replacement of the line shaft drive in a paper machine},
journal={CELLULOSE CHEMISTRY AND TECHNOLOGY},
volume={36},
number={5-6},
pages={559-565},
document_type={Article},
}