@ARTICLE{
author={Vasic Milan P,Blagojevic Mirko Z,Banic Milan S,Mackic Tihomir},
year={2026},
title={An Investigation into the Effects of Lubricant Type on Thermal Stability and Efficiency of Cycloidal Reducers},
journal={LUBRICANTS},
volume={14},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Jovanovic D,Banic Milan S,Korunovic Nikola D,Milosevic Milos,Marinkovic Dragan},
year={2026},
title={Experimental Investigation into Dynamic and Static Stiffness Relationships in Rubber-Metal Springs},
journal={PHYSICAL MESOMECHANICS},
volume={29},
number={1},
pages={142-152},
document_type={Article},
} 

@ARTICLE{
author={Tomic Misa M,Simonovic Milos B,Pavlovic Vukasin D,Banic Milan S,Milosevic Milos},
year={2026},
title={Control of Physically Connected Off-Road Skid-Steering Robotic Vehicles Based on Numerical Simulation and Neural Network Models},
journal={APPLIED SCIENCES-BASEL},
volume={16},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Jovana,Matejic Marija M,Rangelov Damjan,Banic Milan S,Skerlic Jasmina,Jeremic Nevena S,Matejic Milos S},
year={2026},
title={Tribological and Rheological Characterization of 3D Printed Polycarbonate: Effect of Layer Orientation, Surface Topography, and Lubrication Conditions},
journal={LUBRICANTS},
volume={14},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ristic-Durrant Danijela,Banic Milan S,Trifunovic Milan B,Klapper Alina,Madic Milos J,Trajkovic Aleksandar,Kuhn Dietrich,Simonovic Milos B},
year={2025},
title={Novel use of EO satellite data and AI in railways: A concept for rail buckling risk estimation in the SPATRA Project},
journal={2025 20TH EUROPEAN DEPENDABLE COMPUTING CONFERENCE COMPANION PROCEEDINGS, EDCC-C},
volume={},
number={},
pages={80-83},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Banic Milan S,Ristic-Durrant Danijela,Madic Milos J,Klapper Alina,Trifunovic Milan B,Simonovic Milos B,Fischer Szabolcs},
year={2025},
title={The Use of Earth Observation Data for Railway Infrastructure Monitoring-A Review},
journal={INFRASTRUCTURES},
volume={10},
number={3},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Vasic Milan P,Blagojevic Mirko Z,Banic Milan S,Maccioni Lorenzo,Concli Franco},
year={2025},
title={Theoretical and Experimental Investigation of the Thermal Stability of a Cycloid Speed Reducer},
journal={LUBRICANTS},
volume={13},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Milan,Banic Milan S,Stamenkovic Dusan S,Simonovic Milos B,Miltenovic Aleksandar V,Pavlovic Vukasin D},
year={2024},
title={The Influence of Rubber Hysteresis on the Sliding Friction Coefficient During Contact Between Viscoelastic Bodies and a Hard Substrate},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={24},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Korunovic Nikola D,Banic Milan S,Pavlovic Vukasin D,Nestorovic Tamara N},
year={2024},
title={Structural Optimization of an Unmanned Ground Vehicle as Part of a Robotic Grazing System Design},
journal={MACHINES},
volume={12},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Simonovic Milos B,Banic Milan S,Stamenkovic Dusan S,Franke Marten,Michels Kai,Schoolmann Ingo,Ristic-Durrant Danijela D,Ulianov Cristian,Dan Stan Sergiu,Plesa Alin,Dimec Marjan},
year={2024},
title={Toward the Enhancement of Rail Sustainability: Demonstration of a Holistic Approach to Obstacle Detection in Operational Railway Environments},
journal={SUSTAINABILITY},
volume={16},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Tanaskovic Jovan D,Stefanovic-Marinovic Jelena,Rangelov Damjan,Peric Marko},
year={2024},
title={Wear Load Capacity of Crossed Helical Gears},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={22},
number={1},
pages={125-138},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Vitkovic Nikola M,Simonovic Milos B,Peric Marko,Rangelov Damjan},
year={2024},
title={Investigation of the Influence of Contact Patterns of Worm-Gear Sets on Friction Heat Generation during Meshing},
journal={APPLIED SCIENCES-BASEL},
volume={14},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Stamenkovic Dusan S,Banic Milan S,Miltenovic Aleksandar V,Simonovic Milos B},
year={2023},
title={Modern Approaches to Condition Monitoring of Railway Assets},
journal={XXVI. MEDZINARODNEJ KONFERENCIE: SUCASNE PROBLEMY V KOLAJOVYCH VOZIDLACH, DIEL II},
volume={},
number={},
pages={251-260},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Franke Marten,Reddy Chaitra,Ristic-Durrant Danijela D,Jayawardana Jehan,Michels Kai,Banic Milan S,Simonovic Milos B},
year={2022},
title={Towards holistic autonomous obstacle detection in railways by complementing of on-board vision with UAV-based object localization},
journal={2022 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS)},
volume={},
number={},
pages={7012-7019},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Petrovic Aleksandar D,Banic Milan S,Simonovic Milos B,Stamenkovic Dusan S,Miltenovic Aleksandar V,Adamovic Gavrilo,Rangelov Damjan},
year={2022},
title={Integration of Computer Vision and Convolutional Neural Networks in the System for Detection of Rail Track and Signals on the Railway},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Rajic Milena N,Zivkovic Dragoljub S,Banic Milan S,Mancic Marko V,Maneski Tasko Dj,Milosevic Milos S,Mitrovic Nenad R},
year={2022},
title={Experimental and Numerical Stress and Strain Analysis of the Boiler Reversing Chamber Tube Plate},
journal={THERMAL SCIENCE},
volume={26},
number={3},
pages={2135-2145},
document_type={Article},
} 

@ARTICLE{
author={Peric Stanisa Lj,Milojkovic Marko T,Stan Sergiu-Dan,Banic Milan S,Antic Dragan S},
year={2022},
title={Dealing with Low Quality Images in Railway Obstacle Detection System},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Rosic Slobodan,Stamenkovic Dusan S,Banic Milan S,Simonovic Milos B,Ristic-Durrant Danijela D,Ulianov Cristian},
year={2022},
title={Analysis of the Safety Level of Obstacle Detection in Autonomous Railway Vehicles},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={3},
pages={187-205},
document_type={Article},
} 

@ARTICLE{
author={Banic Milan S,Pavlovic Ivan R,Miltenovic Aleksandar V,Simonovic Milos B,Mladenovic Marko,Jovanovic Dragan S,Rackov Milan J},
year={2022},
title={Prediction of Dynamic Response of Vibration Isolated Railway Obstacle Detection System},
journal={ACTA POLYTECHNICA HUNGARICA},
volume={19},
number={3},
pages={51-64},
document_type={Article},
} 

@ARTICLE{
author={Ciric Ivan T,Pavlovic Milan G,Banic Milan S,Simonovic Milos B,Nikolic Vlastimir D},
year={2022},
title={AI Powered Obstacle Distance Estimation for Onboard Autonomous Train Operation},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={29},
number={2},
pages={611-619},
document_type={Article},
} 

@ARTICLE{
author={Hyde Paul,Ulianov Cristian,Liu Jin,Banic Milan S,Simonovic Milos B,Ristic-Durrant Danijela D},
year={2022},
title={Use cases for obstacle detection and track intrusion detection systems in the context of new generation of railway traffic management systems},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT},
volume={236},
number={2},
pages={149-158},
document_type={Article},
} 

@ARTICLE{
author={Ristic-Durrant Danijela D,Haseeb Muhammad Abdul,Banic Milan S,Stamenkovic Dusan S,Simonovic Milos B,Nikolic Dragan},
year={2022},
title={SMART on-board multi-sensor obstacle detection system for improvement of rail transport safety},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT},
volume={236},
number={6},
pages={623-636},
document_type={Article},
} 

@ARTICLE{
author={Rajic Milena N,Zivkovic Dragoljub,Banic Milan S,Mancic Marko V},
year={2021},
title={Stress-Strain Analysis of Hot Water Boiler Tube Plate in Start-Up Regime},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={21},
number={3},
pages={266-272},
document_type={Article},
} 

@ARTICLE{
author={Korunovic Nikola D,Banic Milan S,Trifunovic Milan B,Pavlovic Ana},
year={2021},
title={Bergstrom-Boyce Vs. Hyperelastic Rubber Models in Structural Analysis of Tires},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={19},
number={4},
pages={767-779},
document_type={Article},
} 

@ARTICLE{
author={Ristic-Durrant Danijela D,Haseeb Muhammad Abdul,Franke Marten,Banic Milan S,Simonovic Milos B,Stamenkovic Dusan S},
year={2020},
title={Artificial Intelligence for Obstacle Detection in Railways: Project SMART and Beyond},
journal={DEPENDABLE COMPUTING, EDCC 2020 WORKSHOPS},
volume={1279},
number={},
pages={44-55},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Aleksandar V,Jovanovic Dragan S,Tica Milan M},
year={2020},
title={Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation},
journal={POLYMERS},
volume={12},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Tica Milan M,Banic Milan S,Miltenovic Djordje},
year={2020},
title={Prediction of Temperature Distribution in the Worm Gear Meshing},
journal={FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING},
volume={18},
number={2},
pages={329-339},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S},
year={2020},
title={Thermal Analysis of a Crossed Helical Gearbox Using Fem},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={1},
pages={67-78},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Velimirovic Nikola},
year={2019},
title={Technical Solution of the Drive System for Mixing Dough Machine},
journal={9TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2019): TRENDS IN NEW INDUSTRIAL REVOLUTION},
volume={290},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Abdul Haseeb Muhammad,Ristic-Durrant Danijela D,Graeser Axel,Banic Milan S,Stamenkovic Dusan S},
year={2019},
title={Multi-DisNet: Machine Learning-Based Object Distance Estimation from Multiple Cameras},
journal={COMPUTER VISION SYSTEMS (ICVS 2019)},
volume={11754},
number={},
pages={457-469},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Aleksandar V,Simonovic Milos B,Milosevic Milos},
year={2019},
title={Design of Housing and Vibration Suppression for Obstacle Detection System in Railways},
journal={XXIV. MEDZINARODNA KONFERENCIA SUCASNE PROBLEMY V KOLAJAVYCH VOZIDLACH, DIEL I},
volume={},
number={},
pages={23-32},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Pavlovic Milan G,Ciric Ivan T,Ristic-Durrant Danijela D,Nikolic Vlastimir D,Simonovic Milos B,Ciric Milica V,Banic Milan S},
year={2018},
title={Advanced Thermal Camera Based System for Object Detection on Rail Tracks},
journal={THERMAL SCIENCE},
volume={22},
number={},
pages={S1551-S1561},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Rajic Milena N,Banic Milan S,Zivkovic Dragoljub S,Tomic Misa M,Mancic Marko V},
year={2018},
title={Construction Optimization of Hot Water Fire-Tube Boiler Using Thermomechanical Finite Element Analysis},
journal={THERMAL SCIENCE},
volume={22},
number={},
pages={S1511-S1523},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Banic Milan S,Miltenovic Djordje},
year={2017},
title={Load capacity of worm gear transmission from aspect of maximal use of available resources},
journal={8TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2017) - TRENDS IN NEW INDUSTRIAL REVOLUTION},
volume={121},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosevic Milos,Banic Milan S,Stamenkovic Dusan S,Pavlovic Vukasin D,Tomic Misa M,Miltenovic Aleksandar V},
year={2016},
title={Distribution of Generated Friction Heat at Wheel-Rail Contact During Wheel Slipping Acceleration},
journal={THERMAL SCIENCE},
volume={20},
number={},
pages={S1561-S1571},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Hedrih Andjelka N,Banic Milan S},
year={2016},
title={The effect of friction and impact angle on the spermatozoa-oocyte local contact dynamics},
journal={JOURNAL OF THEORETICAL BIOLOGY},
volume={393},
number={},
pages={32-42},
document_type={Article},
} 

@ARTICLE{
author={Bucha J,Miltenovic Aleksandar V,Banic Milan S},
year={2015},
title={Utilization of CAD Skeleton Method for Interconnection of CAE Programs Used in Vehicle Design Process},
journal={TRANSPORT MEANS 2015, PTS I AND II},
volume={},
number={},
pages={244-247},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Banic Milan S},
year={2015},
title={Wear Load Capacity of Crossed Helical Gears With Wheel Made From Sintered Steel},
journal={SCIENCE OF SINTERING},
volume={47},
number={2},
pages={153-163},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Djordje,Tica Milan M,Miltenovic Aleksandar V,Banic Milan S,Zivkovic Srdjan M,Miskovic Zarko Z},
year={2014},
title={Pitting of Tooth Flanks of Crossed Helical Gears Made of Sintered Steel},
journal={TRANSACTIONS OF FAMENA},
volume={38},
number={4},
pages={77-88},
document_type={Article},
} 

@ARTICLE{
author={Rackov Milan J,Milovancevic Milos D,Kanovic Zeljko S,Veres Miroslav,Rafa Klara,Banic Milan S,Miltenovic Aleksandar V},
year={2014},
title={Optimization of Hcr Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={21},
number={4},
pages={723-732},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Vojislav Dj,Banic Milan S,Miltenovic Aleksandar V},
year={2012},
title={Modern Approach for Load Capacity Calculation of Worm Gears},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={31-36},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Aleksandar V,Nikolic Vlastimir D,Milovancevic Milos D,Banic Milan S},
year={2012},
title={Experimental and Fem Analysis of Sintered Steel Worm Gear Wear},
journal={TRANSACTIONS OF FAMENA},
volume={36},
number={4},
pages={85-96},
document_type={Article},
} 

@ARTICLE{
author={Banic Milan S,Stamenkovic Dusan S,Miltenovic Vojislav Dj,Milosevic Milos,Miltenovic Aleksandar V,Djekic Petar,Rackov Milan J},
year={2012},
title={Prediction of Heat Generation in Rubber Or Rubber-Metal Springs},
journal={THERMAL SCIENCE},
volume={16},
number={},
pages={S527-S539},
document_type={Article},
} 

@ARTICLE{
author={Zivkovic Dragoljub S,Milcic Dragan S,Banic Milan S,Milosavljevic Pedja M},
year={2012},
title={Thermomechanical Finite Element Analysis of Hot Water Boiler Structure},
journal={THERMAL SCIENCE},
volume={16},
number={},
pages={S387-S398},
document_type={Article},
} 

@ARTICLE{
author={Stamenkovic Dusan S,Milosevic Milos,Mijajlovic Miroslav M,Banic Milan S},
year={2012},
title={Recommendations for the estimation of the strength of the railway wheel set press fit joint},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT},
volume={226},
number={F1},
pages={48-61},
document_type={Article},
} 

@ARTICLE{
author={Stamenkovic Dusan S,Milosevic Milos,Mijajlovic Miroslav M,Banic Milan S},
year={2011},
title={Estimation of the Static Friction Coefficient for Press Fit Joints},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={17},
number={3},
pages={341-355},
document_type={Article},
} 

@ARTICLE{
author={Miltenovic Djordje,Banic Milan S,Miltenovic Aleksandar V},
year={2010},
title={Effect of Lubricants on Efficiency Coefficient of Worm Gear Transmitters},
journal={SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING},
volume={},
number={},
pages={163-166},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Miltenovic Vojislav Dj,Veres Miroslav,Banic Milan S},
year={2010},
title={Concept of Virtual Product Development},
journal={SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING},
volume={},
number={},
pages={7-12},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Tomovic Radoslav N,Miltenovic Vojislav Dj,Banic Milan S,Miltenovic Aleksandar V},
year={2010},
title={Vibration response of rigid rotor in unloaded rolling element bearing},
journal={INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES},
volume={52},
number={9},
pages={1176-1185},
document_type={Article},
} 

@ARTICLE{
author={Manic Miodrag T,Miltenovic Vojislav Dj,Stojkovic Milos S,Banic Milan S},
year={2010},
title={Feature Models in Virtual Product Development},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={56},
number={3},
pages={169-178},
document_type={Article},
}