@ARTICLE{
author={Milic-Jankovic Milica,Svorcan Jelena M,Atanasovska Ivana D},
year={2025},
title={Development of an Artificial Neural Network-Based Tool for Predicting Failures in Composite Laminate Structures},
journal={BIOMIMETICS},
volume={10},
number={8},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ljubojevic Pavle,Lazovic Tatjana M,Atanasovska Ivana D},
year={2025},
title={Influence of Geometry Parameters on Shaft's Load-Carrying Capacity},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, KOD 2024},
volume={174},
number={},
pages={472-481},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milic Milica,Svorcan Jelena M,Ivanov Toni D,Atanasovska Ivana D,Momcilovic Dejan B,Flajs Zeljko R,Rasuo Bosko P},
year={2025},
title={Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV},
journal={AEROSPACE},
volume={12},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Nikitovic Aleksandra M,Ducic Nedeljko G,Jeli Zorana V,Bulatovic Radovan R,Atanasovska Ivana D},
year={2025},
title={Dimensional synthesis of a four-bar linkage for closed-path generation performed by the differential evolution algorithm combined with the marine predators algorithm},
journal={MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Abderazek Hammoudi,Laouissi Aissa,Nouioua Mourad,Atanasovska Ivana D},
year={2025},
title={Recent swarm intelligence techniques for optimal spur gear design},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Lazovic Tatjana M,Marinkovic Aleksandar B,Atanasovska Ivana D,Sedak Milos I,Stojanovic Blaza Z},
year={2024},
title={From Innovation to Standardization-A Century of Rolling Bearing Life Formula},
journal={MACHINES},
volume={12},
number={7},
pages={-},
document_type={Review},
} 

@ARTICLE{
author={Atanasovska Ivana D,Patil Santosh S,Casanova Victor Roda},
year={2024},
title={Special issue: Advanced mathematical modeling in mechanical engineering},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={238},
number={3},
pages={621-623},
document_type={Editorial Material},
} 

@ARTICLE{
author={Abderazek Hammoudi,Laouissi Aissa,Nouioua Mourad,Atanasovska Ivana D},
year={2024},
title={Optimization of turning process parameters using a new hybrid evolutionary algorithm},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={238},
number={3},
pages={758-768},
document_type={Article},
} 

@ARTICLE{
author={Milic Milica,Svorcan Jelena M,Zoric Nemanja D,Atanasovska Ivana D,Momcilovic Dejan B},
year={2024},
title={Mathematical modeling and experimental investigation of a composite beam failure-Case study},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={238},
number={3},
pages={654-665},
document_type={Article},
} 

@ARTICLE{
author={Bulatovic Radovan R,Salinic Slavisa M,Savkovic Mile M,Atanasovska Ivana D,Pavlovic Goran V},
year={2023},
title={A differential evolution algorithm combined with Lévy Flight for dimensional synthesis of four-bar linkage},
journal={MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Atanasovska Ivana D,Momcilovic Dejan B,Lazovic Tatjana M,Marinkovic Aleksandar B,Soldat Natasa D},
year={2023},
title={Biomimetics Design of Tooth Root Zone at Cylindrical Gears Profile},
journal={BIOMIMETICS},
volume={8},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Dejan B,Atanasovska Ivana D,Vulovic Snezana D,Pavlovic Ana},
year={2023},
title={Life Assessment of Corroded Wire for Prestressing},
journal={METALS},
volume={13},
number={2},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D,Soldat Natasa D,Patil Santosh S,Mitrovic Radivoje M,Tomovic Radoslav Z},
year={2023},
title={Damage Factor Calculation for Condition Monitoring of Rolling Bearings},
journal={ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING},
volume={48},
number={3},
pages={3181-3194},
document_type={Article},
} 

@ARTICLE{
author={Bisagni C,Raimondo A,Atanasovska Ivana D,Milic Milica,Troian R,Frulla G,Polla A,Cora ON,Bekci ML,Henriques B,de Moura MFSF,Almudaihesh F,Grigg S},
year={2022},
title={Comparison of numerical analyses of a composite wing component subjected to 4-point bending},
journal={COMPOSITES PART C: OPEN ACCESS},
volume={8},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D,Momcilovic Dejan B},
year={2021},
title={Geometric Optimization of Transition Zones Based on Biomimetics Principles},
journal={JOURNAL OF THE SERBIAN SOCIETY FOR COMPUTATIONAL MECHANICS},
volume={15},
number={2},
pages={32-45},
document_type={Article},
} 

@ARTICLE{
author={Georgiades Fotios,Hedrih Andjelka N,Atanasovska Ivana D},
year={2021},
title={"Nonlinear Dynamics of Mechanical Systems" dedicated to 75th birthday and 52 years scientific contribution of Prof. Katica R. (Stevanovic) Hedrih},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={235},
number={20},
pages={4500-4502},
document_type={Editorial Material},
} 

@ARTICLE{
author={Soldat Natasa D,Mitrovic Radivoje M,Atanasovska Ivana D,Tomovic Radoslav N},
year={2020},
title={A Methodology for Analyzing Radial Ball Bearing Vibrations},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={1},
pages={13-28},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D,Hedrih (Stevanovic) Katica R},
year={2018},
title={A New Collision Model for Analysing the Vibro-Impact of Spur Gears},
journal={TRANSACTIONS OF FAMENA},
volume={42},
number={2},
pages={1-13},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D},
year={2017},
title={Multi-body contact in non-linear dynamics of real mechanical systems},
journal={X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017)},
volume={199},
number={},
pages={510-515},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Atanasovska Ivana D,Abderazek Hammoudi},
year={2017},
title={Comparative Analysis of few new Procedures for Spur Gears Tooth Profile Optimization with Different Methods and Aspects},
journal={INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2},
volume={2294},
number={1-2},
pages={1169-1175},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Abderazek Hammoudi,Ferhat Djeddou,Atanasovska Ivana D},
year={2017},
title={Adaptive mixed differential evolution algorithm for bi-objective tooth profile spur gear optimization},
journal={INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
volume={90},
number={5-8},
pages={2063-2073},
document_type={Article},
} 

@ARTICLE{
author={Grujicic Rade N,Tomovic Radoslav N,Mitrovic Radivoje M,Jovanovic Janko D,Atanasovska Ivana D},
year={2016},
title={The Analysis of Impact of Intensity of Contact Load and Angular Shaft Speed on the Heat Generation Within Radial Ball Bearing},
journal={THERMAL SCIENCE},
volume={20},
number={5},
pages={1765-1776},
document_type={Article},
} 

@ARTICLE{
author={Patil Santosh S,Karuppanan Saravanan,Atanasovska Ivana D},
year={2016},
title={Experimental measurement of strain and stress state at the contacting helical gear pairs},
journal={MEASUREMENT},
volume={82},
number={},
pages={313-322},
document_type={Article},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Atanasovska Ivana D,Soldat Natasa D,Momcilovic Dejan B},
year={2015},
title={Effects of Operation Temperature on Thermal Expansion and Main Parameters of Radial Ball Bearings},
journal={THERMAL SCIENCE},
volume={19},
number={5},
pages={1835-1844},
document_type={Article},
} 

@ARTICLE{
author={Abderazek Hammoudi,Ferhat Djeddou,Atanasovska Ivana D,Boualem Keskes},
year={2015},
title={A differential evolution algorithm for tooth profile optimization with respect to balancing specific sliding coefficients of involute cylindrical spur and helical gears},
journal={ADVANCES IN MECHANICAL ENGINEERING},
volume={7},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Patil Santosh S,Karuppanan Saravanan,Atanasovska Ivana D},
year={2015},
title={Contact Stress Evaluation of Involute Gear Pairs, Including the Effects of Friction and Helix Angle},
journal={JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME},
volume={137},
number={4},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D},
year={2015},
title={The mathematical phenomenological mapping in non-linear dynamics of spur gear pair and radial ball bearing due to the variable stiffness},
journal={INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS},
volume={73},
number={},
pages={114-120},
document_type={Article},
} 

@ARTICLE{
author={Patil Santosh S,Karuppanan Saravanan,Atanasovska Ivana D,Wahab Azmi Abdul},
year={2014},
title={Frictional Tooth Contact Analysis along Line of Action of a Spur Gear using Finite Element Method},
journal={INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014)},
volume={5},
number={},
pages={1801-1809},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Patil Santosh S,Karuppanan Saravanan,Atanasovska Ivana D,Wahab Azmi Abdul,Lias MR},
year={2014},
title={Contact Stress Analysis for Gears of Different Helix Angle Using Finite Element Method},
journal={ICPER 2014 - 4TH INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY},
volume={13},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Patil Santosh S,Karuppanan Saravanan,Atanasovska Ivana D,Wahab Azmi Abdul},
year={2014},
title={Contact stress analysis of helical gear pairs, including frictional coefficients},
journal={INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES},
volume={85},
number={},
pages={205-211},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Petkovic Zoran D,Atanasovska Ivana D,Milojevic Goran Z,Mihajlovic Vaso M},
year={2013},
title={Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns},
journal={ENGINEERING FAILURE ANALYSIS},
volume={32},
number={},
pages={322-333},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Dejan B,Mitrovic Radivoje M,Atanasovska Ivana D},
year={2012},
title={Quantification of Stress Raiser Influence on Decrease of Machine Parts Fatigue Life},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={215-218},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Atanasovska Ivana D,Momcilovic Dejan B},
year={2012},
title={Prediction of Crack Initiation in Spur Gear Contact Zone},
journal={MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012},
volume={},
number={},
pages={37-44},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Mitrovic Radivoje M,Momcilovic Dejan B,Eric Olivera A,Atanasovska Ivana D,Hut Nenad T},
year={2012},
title={Study on Impact Properties of Creep-Resistant Steel Thermally Simulated Heat Affected Zone},
journal={THERMAL SCIENCE},
volume={16},
number={2},
pages={513-525},
document_type={Article},
} 

@ARTICLE{
author={Momcilovic Dejan B,Odanovic Zoran D,Mitrovic Radivoje M,Atanasovska Ivana D,Vuherer Tomaz},
year={2012},
title={Failure analysis of hydraulic turbine shaft},
journal={ENGINEERING FAILURE ANALYSIS},
volume={20},
number={},
pages={54-66},
document_type={Article},
} 

@ARTICLE{
author={Atanasovska Ivana D,Mitrovic Radivoje M,Momcilovic Dejan B},
year={2010},
title={Fem Model for Calculation of Hydro Turbine Shaft},
journal={SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING},
volume={},
number={},
pages={183-188},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Atanasovska Ivana D,Mitrovic Radivoje M,Momcilovic Dejan B,Subic A},
year={2010},
title={Analysis of the nominal load effects on gear load capacity using the finite-element method},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
volume={224},
number={C11},
pages={2539-2548},
document_type={Article},
} 

@ARTICLE{
author={Burzic Meri,Prokic-Cvetkovic Radica,Grujic Biljana,Atanasovska Ivana D,Adamovic Zivoslav Z},
year={2008},
title={Safe Operation of Welded Structure with Cracks at Elevated Temperature},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={54},
number={11},
pages={807-816},
document_type={Article},
}