@ARTICLE{
author={Arsic Dusan M,Nikolic Ruzica R,Arsic Aleksandra M,Cvetkovic Dragan Z,Bokuvka Otakar,Mandic Vesna M},
year={2026},
title={Root Cause Assessment of Welded Satellite Gear Carrier Failure in a Bucket Wheel Excavator},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={32},
number={2},
pages={230-240},
document_type={Article},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Adamovic Dragan D,Sedmak Aleksandar S,Delic Marko,Vulovic Radun},
year={2026},
title={A new artificial neural network model for prediction of fatigue strength and yield strength of various steel grades},
journal={ENGINEERING FRACTURE MECHANICS},
volume={337},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Mandic Vesna M,Delic Marko,Adamovic Dragan D,Arsic Dusan M,Ratkovic Nada R,Ivkovic Djordje,Ilic Andjelka},
year={2026},
title={An Experimental-Numerical Framework for Springback Prediction and Angle Compensation in Air Bending with Additively Manufactured Polymer Tools},
journal={JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING},
volume={10},
number={1},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Ivkovic Djordje,Sudzum Ranka,Marinkovic Dragan,Komatina Nikola},
year={2025},
title={Selection of Base Materials for Repair Welding Using BWM-TOPSIS and BWM-RADAR Approaches},
journal={MATERIALS},
volume={18},
number={24},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djacic Slavisa,Djordjevic Milan T,Arsic Dusan M,Aleksandrovic Srbislav M,Delic Marko,Ivkovic Djordje,Lazic Vukic N},
year={2025},
title={Possibilities of Controlling the Ironing Process in Conditions of a Continuously Variable Lateral Force},
journal={TRANSACTIONS OF FAMENA},
volume={49},
number={2},
pages={117-129},
document_type={Article},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Radovic Ljubica M,Ilic Nada M,Mandic Jovana D,Delic Marko,Ivkovic Andjela},
year={2025},
title={Investigation of Tensile Properties at Room and Elevated Temperatures of S1100QL Steel and Its Welded Joints},
journal={COATINGS},
volume={15},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Arsic Dusan M,Nikolic Ruzica R,Delic Marko,Jovanovic-Pesic Zivana M,Mandic Vesna M,Pastorkova Jana},
year={2025},
title={Experimental and Numerical Analysis of Rotary Friction Welding for Al-Cu Joints: Effects of Friction Time on Plastic Deformation and Joint Integrity},
journal={MATERIALS},
volume={18},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Nikolic Ruzica R,Arsic Aleksandra M,Cvetkovic Dragan Z,Pastorkova Jana,Bokuvka Otakar},
year={2025},
title={Measures to prevent damage and to extent the service life of a rotary excavator},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={31},
number={1},
pages={73-80},
document_type={Article},
} 

@ARTICLE{
author={Delic Marko,Mandic Vesna M,Aleksandrovic Srbislav M,Arsic Dusan M,Ivkovic Djordje},
year={2024},
title={Determination of the influence of FDM printing parameters on tensile strength and fracture occurrence of additively manufactured ABS material},
journal={INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Adamovic Dragan D,Nikolic Ruzica,Mitrovic Andjelija M,Bokuvka Otakar},
year={2024},
title={Predicting the mechanical properties of stainless steels using Artificial Neural Networks},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={30},
number={2},
pages={225-232},
document_type={Article},
} 

@ARTICLE{
author={Delic Marko,Mandic Vesna M,Aleksandrovic Srbislav M,Arsic Dusan M},
year={2023},
title={Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5569-5575},
document_type={Article},
} 

@ARTICLE{
author={Ivkovic Djordje,Arsic Dusan M,Prokic-Cvetkovic Radica,Popovic Olivera D,Nikolic Ruzica R,Bokuvka Otakar},
year={2023},
title={How to replace the original material for the welded structure manufacturing},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={29},
number={4},
pages={369-378},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan T,Aleksandrovic Srbislav M,Arsic Dusan M,Nikolic Ruzica R,Szmidla Janusz,Todic Aleksandar,Cukanovic Dragan V,Ulewicz Robert},
year={2023},
title={Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets},
journal={MATERIALS},
volume={16},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Ivkovic Djordje,Ulewicz Robert,Bokuvka Otakar},
year={2022},
title={Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions},
journal={MATERIALS},
volume={15},
number={21},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milovanovic Vladimir P,Arsic Dusan M,Milutinovic Miroslav,Zivkovic Miroslav M,Topalovic Marko D},
year={2022},
title={A Comparison Study of Fatigue Behavior of S355J2+N, S690QL and X37CrMoV5-1 Steel},
journal={METALS},
volume={12},
number={7},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Todic Aleksandar,Djordjevic Milan T,Arsic Dusan M,Dzunic Dragan S,Lazic Vukic N,Aleksandrovic Srbislav M,Krstic Bozidar V},
year={2022},
title={Influence of Vanadium Content on the Tribological Behaviour of X140CrMo12-1 Air-Hardening Steel},
journal={TRANSACTIONS OF FAMENA},
volume={46},
number={2},
pages={15-22},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Sczygiol Norbert,Krstic Bozidar V,Ivkovic Djordje,Hadzima Branislav,Pastorek Filip,Ulewicz Robert},
year={2022},
title={Weldability Assessment of Various Steels by Hard-Facing},
journal={MATERIALS},
volume={15},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Miodrag A,Arsic Dusan M,Flajs Zeljko R,Grbovic Aleksandar M,Todic Aleksandar},
year={2021},
title={Application of Non-Destructive Testing for Condition Analysis, Repair of Damages and Integrity Assessment of Vital Steel Structures},
journal={RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING},
volume={57},
number={10},
pages={918-931},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Markovic Svetislav Lj,Arsic Dusan M,Lazic Vukic N,Hadzima Branislav,Ulewicz Robert},
year={2021},
title={Influence of different hard-facing procedures on quality of surfaces of regenerated gears},
journal={PRODUCTION ENGINEERING ARCHIVES},
volume={27},
number={4},
pages={257-264},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Arsic Dusan M,Nikolic Ruzica R,Lazic Vukic N,Hadzima Branislav,Milovanovic Vladimir P,Dwornicka Renata,Ulewicz Robert},
year={2021},
title={Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures},
journal={MATERIALS},
volume={14},
number={15},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Markovic Svetislav Lj,Arsic Dusan M,Nikolic Ruzica R,Lazic Vukic N,Ratkovic Nada R,Hadzima Branislav,Szmidla Janusz,Ulewicz Robert},
year={2021},
title={Analysis of the Welding Type and Filler Metal Influence on Performance of a Regenerated Gear},
journal={MATERIALS},
volume={14},
number={6},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Sedmak Aleksandar S,Arsic Miodrag A,Sarkocevic Zivce S,Medjo Bojan I,Rakin Marko P,Arsic Dusan M,Lazic Vukic N},
year={2020},
title={Remaining strength of API J55 steel casing pipes damaged by corrosion},
journal={INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING},
volume={188},
number={},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Zivkovic Jelena,Djordjevic Milan Lj,Mladenovic Goran MO},
year={2020},
title={Effect of Elevated Temperatures on Mechanical Properties of Ultra High Strength Hot Work Tool Steel H11},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={2},
pages={71-82},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Ivanovic Ivana B,Sedmak Aleksandar S,Lazic Mirjana M,Kalaba Dragan V,Cekovic Ivana R,Ratkovic Nada R},
year={2020},
title={Experimental and Numerical Study of Temperature Field During Hard-Facing of Different Carbon Steels},
journal={THERMAL SCIENCE},
volume={24},
number={3},
pages={2233-2241},
document_type={Article},
} 

@ARTICLE{
author={Popovic Olivera D,Prokic-Cvetkovic Radica,Radovic Ljubica M,Burzic Zijah H,Arsic Dusan M},
year={2020},
title={The Effect of Heat Input on the Fracture Behaviour of Surface Weld Metal of Rail Steel},
journal={STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA},
volume={20},
number={1},
pages={77-81},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Nikolic Ruzica R,Lazic Vukic N,Arsic Aleksandra M,Savic Zoran Z,Djacic Slavisa,Hadzima Branislav},
year={2019},
title={Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator},
journal={13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019)},
volume={40},
number={},
pages={413-418},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Gnjatovic Nebojsa B,Sedmak Simon A,Arsic Aleksandra M,Uhricik Milan},
year={2019},
title={Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads},
journal={ENGINEERING FAILURE ANALYSIS},
volume={105},
number={},
pages={182-195},
document_type={Article; Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Djacic Slavisa,Sedmak Aleksandar S,Lazic Vukic N,Arsic Dusan M,Mutavdzic Milan},
year={2019},
title={Simulation of Flat Die Deep Drawing Process by Variable Contact Pressure Sliding Model},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={5},
pages={1199-1204},
document_type={Article},
} 

@ARTICLE{
author={Popovic Olivera D,Prokic-Cvetkovic Radica,Radovic Ljubica M,Burzic Zijah H,Arsic Dusan M},
year={2018},
title={The influence of heat input on the toughness and fracture mechanism of surface weld metal},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={2216-2220},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djokovic Jelena M,Nikolic Ruzica R,Hadzima Branislav,Arsic Dusan M,Trsko Libor},
year={2018},
title={Working life estimate of the tubular T-joint by application of the LEFM concept},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={334-339},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Miodrag A,Bosnjak Srdjan M,Gnjatovic Nebojsa B,Sedmak Simon A,Arsic Dusan M,Savic Zoran Z},
year={2018},
title={Determination of Residual Fatigue Life of Welded Structures at Bucket-Wheel Excavators through the Use of Fracture Mechanics},
journal={ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY},
volume={13},
number={},
pages={79-84},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Ilic I,Aleksandrovic Srbislav M,Nikolic Ruzica R,Djordjevic Milan Lj,Hadzima Branislav},
year={2018},
title={Qualification of the welding technology of the structural steel S355J2G3},
journal={9TH INTERNATIONAL SYMPOSIUM ON STEEL BRIDGES},
volume={419},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Ratkovic Nada R,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Prokic-Cvetkovic Radica,Popovic Olivera D},
year={2018},
title={Microstructure in the joining zone during the friction welding of the two dissimilar steels},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={70},
number={2},
pages={401-407},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Gnjatovic Nebojsa B,Milenovic Ivan Lj,Arsic Dusan M},
year={2018},
title={Failure of the bucket wheel excavator buckets},
journal={ENGINEERING FAILURE ANALYSIS},
volume={84},
number={},
pages={247-261},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Hadzima Branislav},
year={2017},
title={Weldability estimation of steels for hot work by the CCT diagrams},
journal={ADVANCES AND TRENDS IN ENGINEERING SCIENCES AND TECHNOLOGIES II},
volume={},
number={},
pages={9-14},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Mandic Vesna M,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Gulisija Zvonko P},
year={2017},
title={Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={69},
number={4},
pages={464-470},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Djordjevic M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Electrical resistance spot brazing of two different alloys},
journal={ADVANCES AND TRENDS IN ENGINEERING SCIENCES AND TECHNOLOGIES},
volume={},
number={},
pages={105-110},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Aleksandrovic Srbislav M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Reparation of the fractured mandrel axle-shaft by welding},
journal={ADVANCES AND TRENDS IN ENGINEERING SCIENCES AND TECHNOLOGIES},
volume={},
number={},
pages={9-14},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Djordjevic Milan,Zivkovic Jelena,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Lazic Vukic N,Rakic Dragan M},
year={2016},
title={Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures},
journal={STRENGTH OF MATERIALS},
volume={48},
number={5},
pages={687-695},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Mitrovic Slobodan R,Dzunic Dragan S,Aleksandrovic Srbislav M,Djordjevic Milan,Nedeljkovic Branislav D},
year={2016},
title={Tribological behavior of four types of filler metals for hard facing under dry conditions},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={68},
number={6},
pages={729-736},
document_type={Article},
} 

@ARTICLE{
author={Ratkovic Nada R,Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Micro-structure in the joint friction plane in friction welding of dissimilar steels},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={414-420},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Rakic Dragan M,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav},
year={2016},
title={Selection and analysis of material for boiler pipes in a steam plant},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={216-223},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Investigation of the lubrication influence on single-phase and multi-phase ironing processes},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={40-47},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels},
journal={XXV POLISH - RUSSIAN - SLOVAK SEMINAR -THEORETICAL FOUNDATION OF CIVIL ENGINEERING},
volume={153},
number={},
pages={392-399},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Arsic Dusan M,Aleksandrovic Srbislav M,Lazic Vukic N,Milosavljevic Dragan I,Nikolic Ruzica R,Mladenovic V},
year={2016},
title={Comparative Study of An Environmentally Friendly Lubricant with Conventional Lubricants in Strip Ironing Test},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1A},
pages={959-970},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Aleksandrovic Srbislav M,Babic Miroslav J,Milosavljevic Dragan I,Djordjevic Milan,Ratkovic Nada R},
year={2016},
title={Reparatory Hard Facing of Working Parts Made of Martensitic Stainless Steel in Confectionary Industry},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1A},
pages={605-618},
document_type={Article},
} 

@ARTICLE{
author={Bosnjak Srdjan M,Arsic Miodrag A,Savicevic Sreten,Milojevic Goran Z,Arsic Dusan M},
year={2016},
title={Fracture analysis of the pulley of a bucket wheel boom hoist system},
journal={EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY},
volume={18},
number={2},
pages={155-163},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav,Bujnak Jan},
year={2015},
title={Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={495-501},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Hadzima Branislav,Kotes Peter},
year={2015},
title={Investigation of the lubricants influence on the ironing process},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={149-154},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav,Vican Josef},
year={2015},
title={Influence of tempering on the deformation level of the multi-layer hard faced samples},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={49-56},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Samardzic Ivan,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav},
year={2015},
title={Impact of the Hard Facing Technology and the Filler Metal on Tribological Characteristics of the Hard Faced Forging Dies},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={5},
pages={1353-1358},
document_type={Article},
}