@ARTICLE{
author={Marinkovic D,Antic Aco,Knezev Milos,Mladjenovic Cvijetin D,Zivkovic Aleksandar M},
year={2024},
title={The Influence of the Cutting Parameters on the Surface Roughness and Vibration Signal in the Turning Process},
journal={MM SCIENCE JOURNAL},
volume={2024},
number={},
pages={7539-7544},
document_type={Article},
} 

@ARTICLE{
author={Knezev Milos,Cep Robert,Mejic Luka,Popovic Branislav,Antic Aco,Strbac Branko M,Zivkovic Aleksandar M},
year={2024},
title={Applying the MIMO BP Neural Network and Cloud-Based Monitoring of Thermal Behavior for High-Speed Motorized Spindle Units},
journal={MACHINES},
volume={12},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjev Mica Z,Milosevic Mijodrag P,Lukic Dejan O,Antic Aco,Novakovic Borivoj,Djordjevic Luka R},
year={2023},
title={Gauss-Based Honey Badger Algorithm for Step-Cone Pulley Optimization Problem},
journal={NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VI, VOL 1},
volume={687},
number={},
pages={78-85},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Knezevic Ivan,Rackov Milan J,Kanovic Zeljko S,Buljevic Anja,Antic Aco,Tica Milan M,Zivkovic Aleksandar M},
year={2023},
title={An Analysis of the Influence of Surface Roughness and Clearance on the Dynamic Behavior of Deep Groove Ball Bearings Using Artificial Neural Networks},
journal={MATERIALS},
volume={16},
number={9},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lukic Dejan O,Cep Robert,Milosevic Mijodrag P,Antic Aco,Zivkovic Aleksandar M,Todic Vladimir V,Rodic Dragan Dj},
year={2022},
title={A Grey Fuzzy Approach to the Selection of Cutting Process from the Aspect of Technological Parameters},
journal={APPLIED SCIENCES-BASEL},
volume={12},
number={24},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Kosarac Aleksandar,Cep Robert,Trochta Miroslav,Knezev Milos,Zivkovic Aleksandar M,Mladjenovic Cvijetin D,Antic Aco},
year={2022},
title={Thermal Behavior Modeling Based on BP Neural Network in Keras Framework for Motorized Machine Tool Spindles},
journal={MATERIALS},
volume={15},
number={21},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lazarevic Milovan M,Ostojic Gordana M,Lukic Dejan O,Milosevic Mijodrag P,Antic Aco},
year={2022},
title={Smart Production Systems: Methods and Application},
journal={2022 21ST INTERNATIONAL SYMPOSIUM INFOTEH-JAHORINA (INFOTEH)},
volume={},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Kraisnik Milija,Cep Robert,Kouril Karel,Balos Sebastian S,Antic Aco,Milutinovic Mladomir},
year={2022},
title={Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load},
journal={CRYSTALS},
volume={12},
number={3},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Mijodrag P,Cep Robert,Cepova Lenka,Lukic Dejan O,Antic Aco,Djurdjev Mica Z},
year={2021},
title={A Hybrid Grey Wolf Optimizer for Process Planning Optimization with Precedence Constraints},
journal={MATERIALS},
volume={14},
number={23},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Djurdjev Mica Z,Cep Robert,Lukic Dejan O,Antic Aco,Popovic Branislav,Milosevic Mijodrag P},
year={2021},
title={A Genetic Crow Search Algorithm for Optimization of Operation Sequencing in Process Planning},
journal={APPLIED SCIENCES-BASEL},
volume={11},
number={5},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Lukic Dejan O,Cep Robert,Vukman Jovan B,Antic Aco,Djurdjev Mica Z,Milosevic Mijodrag P},
year={2020},
title={Multi-Criteria Selection of the Optimal Parameters for High-Speed Machining of Aluminum Alloy Al7075 Thin-Walled Parts},
journal={METALS},
volume={10},
number={12},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Mijodrag P,Lukic Dejan O,Borojevic Stevo,Antic Aco,Djurdjev Mica Z},
year={2019},
title={A Cloud-Based Process Planning System in Industry 4.0 Framework},
journal={PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THE INDUSTRY 4.0 MODEL FOR ADVANCED MANUFACTURING (AMP 2019)},
volume={},
number={},
pages={202-211},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Malotova Sarka,Cep Robert,Zlamal Tomas,Mohyla Petr,Czan Andrej,Antic Aco,Budak Igor M,Mircea Lobontiu},
year={2018},
title={Evaluation of Residual Stresses after Irregular Interrupted Machining},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={25},
number={4},
pages={1009-1013},
document_type={Article},
} 

@ARTICLE{
author={Lukic Dejan O,Zivanovic Sasa T,Vukman Jovan B,Milosevic Mijodrag P,Borojevic Stevo,Antic Aco},
year={2018},
title={The possibilities for application of STEP-NC in actual production conditions},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={32},
number={7},
pages={3317-3328},
document_type={Article},
} 

@ARTICLE{
author={Antic Aco,Popovic Branislav,Krstanovic Lidija,Obradovic Ratko,Milosevic Mijodrag P},
year={2018},
title={Novel texture-based descriptors for tool wear condition monitoring},
journal={MECHANICAL SYSTEMS AND SIGNAL PROCESSING},
volume={98},
number={},
pages={1-15},
document_type={Article},
} 

@ARTICLE{
author={Bojic Zarko,Radosevic Milan,Cosic Ilija P,Moraca Slobodan D,Avramovic Nenad,Antic Aco},
year={2017},
title={The Analysis of the Impact on the Safety of Traffic Participants and Causing the Accidents of Working Machines - Tractors},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={5},
pages={1591-1596},
document_type={Article},
} 

@ARTICLE{
author={Lukic Dejan O,Milosevic Mijodrag P,Antic Aco,Borojevic Stevo,Ficko Mirko},
year={2017},
title={Multi-criteria selection of manufacturing processes in the conceptual process planning},
journal={ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT},
volume={12},
number={2},
pages={151-162},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Mijodrag P,Lukic Dejan O,Borojevic Stevo,Simunovic Goran,Antic Aco},
year={2017},
title={A Model of Collaborative Process Planning System (e-CAPP)},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={24},
number={1},
pages={97-103},
document_type={Article},
} 

@ARTICLE{
author={Milosevic Mijodrag P,Lukic Dejan O,Antic Aco,Lalic Bojan P,Ficko Mirko,Simunovic Goran},
year={2017},
title={e-CAPP: A distributed collaborative system for internet-based process planning},
journal={JOURNAL OF MANUFACTURING SYSTEMS},
volume={42},
number={},
pages={210-223},
document_type={Article},
} 

@ARTICLE{
author={Balos Sebastian S,Sidjanin Leposava P,Dramicanin Miroslav R,Labus-Zlatanovic Danka,Antic Aco},
year={2016},
title={Fsw Welding of Al-Mg Alloy Plates with Increased Edge Roughness Using Square Pin Tools of Various Shoulder Geometries},
journal={MATERIALI IN TEHNOLOGIJE},
volume={50},
number={3},
pages={387-394},
document_type={Article},
} 

@ARTICLE{
author={Ilic Vojin R,Jorgovanovic Nikola Dj,Antic Aco,Moraca Slobodan D,Ungureanu Nikolae},
year={2016},
title={A Novel Fully Fast Recovery Emg Amplifier for the Control of Neural Prosthesis},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={23},
number={4},
pages={1131-1137},
document_type={Article},
} 

@ARTICLE{
author={Saric Tomislav,Simunovic Goran,Lujic Roberto,Simunovic Katica,Antic Aco},
year={2016},
title={Use of Soft Computing Technique for Modelling and Prediction of Cnc Grinding Process},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={23},
number={4},
pages={1123-1130},
document_type={Article},
} 

@ARTICLE{
author={Milisavljevic Stevan M,Mitrovic Slavica,Grubic-Nesic Leposava,Simunovic Goran,Kozak Drazan V,Antic Aco},
year={2013},
title={The Level of Correlation Between Cultural Values and System of Customer Relationship Management},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={6},
pages={1037-1042},
document_type={Article},
} 

@ARTICLE{
author={Antic Aco,Simunovic Goran,Saric Tomislav,Milosevic Mijodrag P,Ficko Mirko},
year={2013},
title={A Model of Tool Wear Monitoring System for Turning},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={2},
pages={247-254},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Budak Igor M,Antic Aco,Nagode Ales,Kosec Borut},
year={2013},
title={FEM modeling and analysis in prevention of the waterway dredgers crane serviceability failure},
journal={ENGINEERING FAILURE ANALYSIS},
volume={28},
number={},
pages={328-339},
document_type={Review},
} 

@ARTICLE{
author={Antic Aco,Kozak Drazan V,Kosec Borut,Simunovic Goran,Saric Tomislav,Kovacevic Dusan I,Cep Robert},
year={2013},
title={Influence of Tool Wear on the Mechanism of Chips Segmentation and Tool Vibration},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={20},
number={1},
pages={105-112},
document_type={Article},
} 

@ARTICLE{
author={Antic Aco,Petrovic Petar B,Zeljkovic Milan V,Kosec Borut,Hodolic Janko},
year={2012},
title={The Influence of Tool Wear on the Chip-Forming Mechanism and Tool Vibrations},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={3},
pages={279-285},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Sokovic Mirko,Budak Igor M,Antic Aco,Kosec Borut},
year={2012},
title={Optimal Finite Elements Method (Fem) Model for the Jib Structure of a Waterway Dredger},
journal={METALURGIJA},
volume={51},
number={1},
pages={113-116},
document_type={Article},
} 

@ARTICLE{
author={Kovacevic Dusan I,Budak Igor M,Antic Aco,Kosec Borut},
year={2011},
title={Special Finite Elements: Theoretical Background and Application},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={18},
number={4},
pages={649-655},
document_type={Article},
} 

@ARTICLE{
author={Kosec Gorazd,Nagode Ales,Budak Igor M,Antic Aco,Kosec Borut},
year={2011},
title={Failure of the pinion from the drive of a cement mill},
journal={ENGINEERING FAILURE ANALYSIS},
volume={18},
number={1},
pages={450-454},
document_type={Article},
} 

@ARTICLE{
author={Antic Aco,Hodolic Janko,Sokovic Mirko},
year={2006},
title={Development of a neural-networks tool-wear monitoring system for a turning process},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERI},
volume={52},
number={11},
pages={763-776},
document_type={Article},
}