@ARTICLE{
author={Djacic Slavisa,Djordjevic Milan T,Arsic Dusan M,Aleksandrovic Srbislav M,Delic Marko,Ivkovic Djordje,Lazic Vukic N},
year={2025},
title={Possibilities of Controlling the Ironing Process in Conditions of a Continuously Variable Lateral Force},
journal={TRANSACTIONS OF FAMENA},
volume={49},
number={2},
pages={117-129},
document_type={Article},
} 

@ARTICLE{
author={Delic Marko,Mandic Vesna M,Aleksandrovic Srbislav M,Arsic Dusan M,Ivkovic Djordje},
year={2024},
title={Determination of the influence of FDM printing parameters on tensile strength and fracture occurrence of additively manufactured ABS material},
journal={INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY},
volume={},
number={},
pages={-},
document_type={Article; Early Access},
} 

@ARTICLE{
author={Delic Marko,Mandic Vesna M,Aleksandrovic Srbislav M,Arsic Dusan M},
year={2023},
title={Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology},
journal={JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY},
volume={37},
number={11},
pages={5569-5575},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan T,Aleksandrovic Srbislav M,Arsic Dusan M,Nikolic Ruzica R,Szmidla Janusz,Todic Aleksandar,Cukanovic Dragan V,Ulewicz Robert},
year={2023},
title={Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets},
journal={MATERIALS},
volume={16},
number={11},
pages={-},
document_type={Article},
} 

@ARTICLE{
author={Todic Aleksandar,Djordjevic Milan T,Arsic Dusan M,Dzunic Dragan S,Lazic Vukic N,Aleksandrovic Srbislav M,Krstic Bozidar V},
year={2022},
title={Influence of Vanadium Content on the Tribological Behaviour of X140CrMo12-1 Air-Hardening Steel},
journal={TRANSACTIONS OF FAMENA},
volume={46},
number={2},
pages={15-22},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Zivkovic Jelena,Djordjevic Milan Lj,Mladenovic Goran MO},
year={2020},
title={Effect of Elevated Temperatures on Mechanical Properties of Ultra High Strength Hot Work Tool Steel H11},
journal={TRANSACTIONS OF FAMENA},
volume={44},
number={2},
pages={71-82},
document_type={Article},
} 

@ARTICLE{
author={Marusic Vlatko,Aleksandrovic Srbislav M,Nedic Bogdan P,Milinovic Andrijana},
year={2020},
title={Investigation of the Impact of Hot Forming the Properties of Seamless Steel Bottles for Liquefied Gases},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={27},
number={3},
pages={1025-1030},
document_type={Article},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Djacic Slavisa,Sedmak Aleksandar S,Lazic Vukic N,Arsic Dusan M,Mutavdzic Milan},
year={2019},
title={Simulation of Flat Die Deep Drawing Process by Variable Contact Pressure Sliding Model},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={26},
number={5},
pages={1199-1204},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Ilic I,Aleksandrovic Srbislav M,Nikolic Ruzica R,Djordjevic Milan Lj,Hadzima Branislav},
year={2018},
title={Qualification of the welding technology of the structural steel S355J2G3},
journal={9TH INTERNATIONAL SYMPOSIUM ON STEEL BRIDGES},
volume={419},
number={},
pages={-},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Mandic Vesna M,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Gulisija Zvonko P},
year={2017},
title={Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={69},
number={4},
pages={464-470},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Aleksandrovic Srbislav M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Reparation of the fractured mandrel axle-shaft by welding},
journal={ADVANCES AND TRENDS IN ENGINEERING SCIENCES AND TECHNOLOGIES},
volume={},
number={},
pages={9-14},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Djordjevic Milan,Zivkovic Jelena,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Lazic Vukic N,Rakic Dragan M},
year={2016},
title={Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures},
journal={STRENGTH OF MATERIALS},
volume={48},
number={5},
pages={687-695},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Mitrovic Slobodan R,Dzunic Dragan S,Aleksandrovic Srbislav M,Djordjevic Milan,Nedeljkovic Branislav D},
year={2016},
title={Tribological behavior of four types of filler metals for hard facing under dry conditions},
journal={INDUSTRIAL LUBRICATION AND TRIBOLOGY},
volume={68},
number={6},
pages={729-736},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Rakic Dragan M,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav},
year={2016},
title={Selection and analysis of material for boiler pipes in a steam plant},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={216-223},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Hadzima Branislav},
year={2016},
title={Investigation of the lubrication influence on single-phase and multi-phase ironing processes},
journal={INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016},
volume={149},
number={},
pages={40-47},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Arsic Dusan M,Aleksandrovic Srbislav M,Lazic Vukic N,Milosavljevic Dragan I,Nikolic Ruzica R,Mladenovic V},
year={2016},
title={Comparative Study of An Environmentally Friendly Lubricant with Conventional Lubricants in Strip Ironing Test},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1A},
pages={959-970},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Aleksandrovic Srbislav M,Babic Miroslav J,Milosavljevic Dragan I,Djordjevic Milan,Ratkovic Nada R},
year={2016},
title={Reparatory Hard Facing of Working Parts Made of Martensitic Stainless Steel in Confectionary Industry},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={22},
number={1A},
pages={605-618},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav,Bujnak Jan},
year={2015},
title={Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={495-501},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Djordjevic Milan,Aleksandrovic Srbislav M,Lazic Vukic N,Arsic Dusan M,Nikolic Ruzica R,Hadzima Branislav,Kotes Peter},
year={2015},
title={Investigation of the lubricants influence on the ironing process},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={149-154},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav,Vican Josef},
year={2015},
title={Influence of tempering on the deformation level of the multi-layer hard faced samples},
journal={XXIV R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (24RSP) (TFOCE 2015)},
volume={111},
number={},
pages={49-56},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Milosavljevic Dragan I,Bogdanovic Gordana,Lazic Vukic N,Aleksandrovic Srbislav M,Lazic Mirjana M},
year={2015},
title={Bulk waves and dynamical behaviour in elastic solids reinforced by two families of strong fibres},
journal={JOURNAL OF ENGINEERING MATHEMATICS},
volume={95},
number={1},
pages={59-72},
document_type={Article},
} 

@ARTICLE{
author={Arsic Dusan M,Lazic Vukic N,Samardzic Ivan,Nikolic Ruzica R,Aleksandrovic Srbislav M,Djordjevic Milan,Hadzima Branislav},
year={2015},
title={Impact of the Hard Facing Technology and the Filler Metal on Tribological Characteristics of the Hard Faced Forging Dies},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={22},
number={5},
pages={1353-1358},
document_type={Article},
} 

@ARTICLE{
author={Zelic Ksenija,Vukicevic Arso M,Jovicic Gordana R,Aleksandrovic Srbislav M,Filipovic Nenad D,Djuric Marija P},
year={2015},
title={Mechanical weakening of devitalized teeth: three-dimensional Finite Element Analysis and prediction of tooth fracture},
journal={INTERNATIONAL ENDODONTIC JOURNAL},
volume={48},
number={9},
pages={850-863},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Nikolic Ruzica R,Mutavdzic Milan,Aleksandrovic Srbislav M,Krstic Bozidar V,Milosavljevic Dragan I},
year={2015},
title={Selection of the Most Appropriate Welding Technology for Hardfacing of Bucket Teeth},
journal={MATERIALI IN TEHNOLOGIJE},
volume={49},
number={1},
pages={165-172},
document_type={Article},
} 

@ARTICLE{
author={Nikolic Ruzica R,Krstic Bozidar V,Lazic Vukic N,Nikolic Ilija Z,Aleksandrovic Srbislav M,Krstic Ivan B,Krstic Vojislav B},
year={2012},
title={Determination and analysis of influence of the hydrodynamic, kinematic and geometric parameters on the motor vehicles hydrodynamic clutch characteristics},
journal={STEEL STRUCTURES AND BRIDGES 2012 - 23RD CZECH AND SLOVAK INTERNATIONAL CONFERENCE},
volume={40},
number={},
pages={316-321},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic Vukic N,Aleksandrovic Srbislav M,Nikolic Ruzica R,Prokic-Cvetkovic Radica,Popovic Olivera D,Milosavljevic Dragan I,Cukic Rajko D},
year={2012},
title={Estimates of weldability and selection of the optimal procedure and technology for welding of high strength steels},
journal={STEEL STRUCTURES AND BRIDGES 2012 - 23RD CZECH AND SLOVAK INTERNATIONAL CONFERENCE},
volume={40},
number={},
pages={310-315},
document_type={Proceedings Paper},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Milosavljevic Dragan I,Nikolic Ilija Z,Aleksandrovic Srbislav M,Nikolic Ruzica R,Mutavdzic Milan},
year={2012},
title={Theoretical and Experimental Estimation of the Working Life of Machine Parts Hard Faced with Austenite-Manganese Electrodes},
journal={MATERIALI IN TEHNOLOGIJE},
volume={46},
number={5},
pages={547-554},
document_type={Article},
} 

@ARTICLE{
author={Aleksandrovic Srbislav M,Babic Miroslav J,Nedeljkovic Branislav D,Vujinovic Tomislav,Taranovic Dragan S,Lazic Vukic N,Milosavljevic Dragan I},
year={2012},
title={Variable Drawbead Height and Variable Contact Pressure as Tribological Influences in Sheet Metal Stripe Sliding Test},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={18},
number={2},
pages={184-194},
document_type={Article},
} 

@ARTICLE{
author={Jevremovic Danimir P,Puskar Tatjana M,Kosec Borut,Vukelic Djordje B,Budak Igor M,Aleksandrovic Srbislav M,Eggbeer Dominic,Williams Robert J},
year={2012},
title={The Analysis of the Mechanical Properties of F75 Co-Cr Alloy for Use in Selective Laser Melting (SLM) Manufacturing of Removable Partial Dentures (RPD)},
journal={METALURGIJA},
volume={51},
number={2},
pages={171-174},
document_type={Article},
} 

@ARTICLE{
author={Aleksandrovic Srbislav M,Stefanovic Milentije C,Adamovic Dragan D,Lazic Vukic N,Babic Miroslav J,Nikolic Ruzica R,Vujinovic Tomislav},
year={2011},
title={Variable Tribological Conditions on the Flange and Nonmonotonous Forming in Deep Drawing of Coated Sheets},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={17},
number={2},
pages={165-178},
document_type={Article},
} 

@ARTICLE{
author={Adamovic Dragan D,Mandic Vesna M,Jurkovic Zoran,Grizelj Branko,Stefanovic Milentije C,Marinkovic Tomislav R,Aleksandrovic Srbislav M},
year={2010},
title={An Experimental Modelling and Numerical Fe Analysis of Steel-strip Ironing Process},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={17},
number={4},
pages={435-444},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Jovanovic Milorad D,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Milosavljevic Dragan I,Krstic Bozidar V,Cukic Rajko D},
year={2010},
title={Energetic Analysis of Hard Facing and Weld Cladding of An Air Powered Drop Hammer Damaged Ram},
journal={THERMAL SCIENCE},
volume={14},
number={},
pages={S269-S284},
document_type={Article},
} 

@ARTICLE{
author={Adamovic Dragan D,Babic Miroslav J,Stefanovic Milentije C,Aleksandrovic Srbislav M,Gulisija Zvonko P,Mitrovic Slobodan R},
year={2010},
title={Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricants Testing},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={3},
pages={329-339},
document_type={Article},
} 

@ARTICLE{
author={Aleksandrovic Srbislav M,Marusic Vlatko,Vujinovic Tomislav,Maglic Leon},
year={2010},
title={Influence of Variable Blank Holding Force and Non monotonous Process of Deep Drawing on Formability of Coated Sheets},
journal={STROJARSTVO},
volume={52},
number={2},
pages={159-168},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Zivkovic Miroslav M,Aleksandrovic Srbislav M,Cukic Rajko D,Jovicic Radomir D,Ivanovic Ivana B},
year={2010},
title={Theoretical-experimental Determining Of Cooling Time (t(8/5)) In Hard Facing Of Steels For Forging Dies},
journal={THERMAL SCIENCE},
volume={14},
number={1},
pages={235-246},
document_type={Article},
} 

@ARTICLE{
author={Nedeljkovic Branislav D,Babic Miroslav J,Mutavdzic Milan,Ratkovic Nada R,Aleksandrovic Srbislav M,Nikolic Ruzica R,Lazic Vukic N},
year={2010},
title={Reparatory Hard Facing Of The Rotational Device Knives For Terrain Levelling},
journal={JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION},
volume={16},
number={1},
pages={46-57},
document_type={Article},
} 

@ARTICLE{
author={Lazic Vukic N,Sedmak Aleksandar S,Aleksandrovic Srbislav M,Milosavljevic Dragan I,Cukic Rajko D,Grabulov Vencislav K},
year={2009},
title={Reparation Of The Damaged Forging Hammer Mallet By Hard Facing And Weld Cladding},
journal={TEHNICKI VJESNIK-TECHNICAL GAZETTE},
volume={16},
number={4},
pages={107-113},
document_type={Article},
} 

@ARTICLE{
author={Aleksandrovic Srbislav M,Stefanovic Milentije C,Adamovic Dragan D,Lazic Vukic N},
year={2009},
title={Variation of Normal Anisotropy Ratio "r" during Plastic Forming},
journal={STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING},
volume={55},
number={6},
pages={392-399},
document_type={Article},
}